New Okhla Industrial Development Authority-NOIDA has published Maintenance Of Green Belt ( Repair Of Boundary Wall , Grill , Gate , Grit Wash And Other Civil Work In Green Belt Sector -93 B , Noida ). Submission Date for this Tender is 24-07-2020. Civil Work Tenders in noida Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work:-M/o Green Belt (R/o Boundary wall, Grill , Gate , Grit wash and other Civil work in Green Belt sector -93 B , Noida ) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Unnamed: 2 | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m , including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m. \n The Contractor has to detect different utilities like sewer line watrer supply line, electric cable, telephone cable, gas pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of engineer in charge. All Kind of Soil. All kinds of soil | 56.75 | Cum | |
| 2 | 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up\nto 50 m and lift upto 1.5 m. | 56.75 | Cum | |
| 3 | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\n1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) | 8.82 | Cum | |
| 4 | 4 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel\nprimer using structural steel etc. as required\nIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 253.12 | Kg | |
| 5 | 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 10 in foundation and plinth in:\nCement mortar 1:4 (1 cement : 4 coarse sand) | 17.52 | Cum | |
| 6 | 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in\nall shapes and sizes in :\nCement mortar 1:4 (1 cement : 4 coarse sand) | 40.04 | Cum | |
| 7 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :\n\n"1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). | 21.86 | Cum | |
| 8 | 8 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size), reinforced\nwith 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing with cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs,\nsills and soffits.\n 50 mm thick | 198.75 | Sqm | |
| 9 | 9 | Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of\ncement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (payment for providing grooves shall be made separately). | 7008.3 | Sqm | |
| 10 | 10 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 15 mm wide and 15 mm deep groove | 9512 | mtr | |
| 11 | 11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :\n Two or more coats on new work | 426.3 | Sqm | |
| 12 | 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :\n One or more coats on old work | 2861.4 | Sqm | |
| 13 | 13 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of\nwall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of\nM.S. angle, C.C. blocks shall be paid separately) | 160 | mtr |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
