Repair Of Work In Mitc Colony
Tender Value
25 Lakhs
Estimated cost
Bid Submission
29 Jul 2020
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KAITHAL → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Of Work In Mitc Colony
BOQ
| Name of Work: Repair of work in MITC colony | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling of cement concrete plain 1:2:4 | 95.16 | CUM | |
| 2 | 2 | Dismantalling brick or flagged stone slab Flooring without concrete base. | 1488 | SQM | |
| 3 | 3 | Loading and unloading stone (building or pitching ) sand, bajri, shingle, spall, bricks bats, Bricks ballast and stone metal. Carriage of materials (metal roads), lead More than 0.48 km. exceeding loading. Unloading and stacking. Surkhi,sand,bajri, Ballast, stone boulders kankar& Building Rubbish. | 95.16 | CUM | |
| 4 | 4 | Preparation of sub grade,including trenching Rough dressing of spoil, final dressing of Earth,to given level and comber, watering Rolling with road roller and compacting the Bed.\n | 2112.96 | SQM | |
| 5 | 5 | Providing and fixing 9” dia PVC pipe | 570 | RFT | |
| 6 | 6 | First class brick work laid in cement sand Mortar 1:5 in founding and plinth. \n | 23.05 | CUM | |
| 7 | 7 | Cement concrete 1:8:16 with stone Aggregate 40mm nominal size in oundation And plinth\n | 159.07 | CUM | |
| 8 | 8 | Providing and laying old 80mm thick inter- Locking paver blocks of shapes and colours In design mix cement M-35 over a bed of 30mm thick fine sand complete in all respect\n | 1348.5 | SQM | |
| 9 | 9 | Providing and laying 80mm thick ISI marked Interlocking paver blocks conforming of ISI 5658:2006/IRC.SP 63-2004 of all shapes and Colours in design mix cement M-40 overa bed of 30mm thick fine sand complete in all \nRespect.\n | 562.46 | SQM | |
| 10 | 10 | Wrought iron and mild steel (using angles, flats, square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors open able or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. | 12.29 | CUM | |
| 11 | 11 | A cement concrete 1:2:4 with stone aggregate 20mm nominal size in \nPavements. Roads,taxi-tracs and runways, Laid to required slope and camber including consolidation, finishing and tamping Complete. \n1:1 ½ :3 mix is used, instead of 1:2:4\n | 267.59 | CUM | |
| 12 | 12 | Wrought iron or mild steel (using angles,flats\n,squares bars, tees, and channels) ladders, \nGrills,gratting frames, windows guards, iron \ndoors open able or fixed stair case or parapet\nOr any other type of railing , gates and tree \nGuards etc. , including cost of screws and \nWelding rods or bolts and nuts complete \nFixed in position.\nFor various jalies cover & inspection chamber \nCover\n | 9 | QTL | |
| 13 | 13 | Pdg. & laying 25 mm thick mastic asphalt wearing course on top of deack slab \nexcluding prime coat with paving grade Bitumen meeting the required given in table 500-29 prepared by using mastic cooker and Laid to required level and slope after cleaning the surfsce , including providing antiskid surface with bitumen protected Fine grained hard stone chipping of 9.5mm Nominal size @0.005 cum per 10sqm and at Approximate spacing of 10cm center to \nCenter in both direction. Pressed into surface not less then 100deg. protruding 1mm to 4mm over mastic surface all complete as per Clause 515\n | 209.25 | SQM | |
| 14 | 14 | Earth filling upto 16km lead including loading And unloading complete in all respect.\n | 420.25 | CUM | |
| 15 | 15 | Constructing standerd drain Type-II as well as Per above item No. 29.52\n | 64.96 | RMT | |
| 16 | 16 | Providing and fixing RCC bench. | BI01010001010000000000000515BI0100001113 | 25 | NOS |
AI Tender Summary
Tender Timeline
Jul 10, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 30, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender