Construction Of Additional Accommodation For Veterinary Hospital At Bangana Distt . Una ( Hp ) .
Tender Value
18.65 Lakhs
Estimated cost
Bid Submission
30 Jul 2020
0 days left
EMD
35500
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bangana (Una) → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Additional Accommodation For Veterinary Hospital At Bangana Distt . Una ( Hp ) .
BOQ
| Name of Work: Construction of Additional Accommodation for Veterinary Hospital Bangana Distt. Una (H.P). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification | 123.84 | Cum. | |
| 2 | 2.01 | Providing form work with steel plates (3.15mm) three point fifteen milimetre thick welded with angle iron in frame (30x30x5mm) ( Thirty x thirty x five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc., with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4mtr.(Four metre) including carriage of materials with in all leads and lifts. (a). Foundations, footings & bases of columns etc., and mass concrete. | 22.5 | Sqm. | |
| 3 | 2.03 | (B). Column, pillars, posts and struts. (i). Square, rectangular or polygonal in plan. | 134.63 | Sqm. | |
| 4 | 2.04 | (C). Beams, cantilevers, girders and lintels. i. Sides and soffits of beams, beam haunching, cantilevers, bressumers and lintels in all heights from floor. | 135.24 | Sqm. | |
| 5 | 2.05 | (D).Flat surfaces such as soffits of suspended floors, roofs, landing and the like. ( i). Floors etc., upto 200mm( Two hundred milimetre) in thickness. | 152.11 | Sqm. | |
| 6 | 3 | Providing and laying cement concrete 1:6:12 (one cement :six sand :twelve graded stone aggregate 40mm nominal size)(Forty milimetre) and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts. | 19.12 | Cum. | |
| 7 | 4.01 | Providing and laying cement concrete 1:1.5:3 (One cement : one point five sand :Three graded stone aggregate 20mm nominal size)( Twenty milimetre) and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (a) Foundations, footings, bases of columns and the like and mass concrete. | 17.27 | Cum. | |
| 8 | 4.02 | (b). Columns, pillars, posts and struts in all floor levels. | 14.54 | Cum. | |
| 9 | 4.03 | (c). Suspended floors, roofs, landings and shelves and their support balconies, beams, girders, bressumers and cantilevers in all floor levels. | 35.03 | Cum. | |
| 10 | 5 | Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in: Foundation and plinth including carriage of materials within all leads and lifts | 0.57 | Cum. | |
| 11 | 6 | Providing mild steel/tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all floor levels (a). Tor steel. including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. | 6684 | K.g. | |
| 12 | 7 | Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 Sand) First Class Bricks including carriage of material within all leads and lifts. | 31.35 | Cum. | |
| 13 | 8 | Brick work using common burnt clay building bricks in superstructure in Cement Mortar 1:6 (1 Cement : 6 Sand) First Class Bricks including carriage of material within all leads and lifts. | 33.65 | Cum. | |
| 14 | 9.01 | Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge including carriage of material within all leads and lifts. For doors windows and ventilatiors and glazed partitions frames. | 490.49 | Kg. | |
| 15 | 9.02 | For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) including carriage of material within all leads and lifts. | 492.5 | Kg | |
| 16 | 10 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) glazing with glass panes of 4mm thickness (weight not less than 10.00 kg/sqm.) including carriage of material within all leads and lifts. | 28.39 | Sqm. | |
| 17 | 11 | Providing and fixing Particle board bwp phenol bonded exterior/interior grade in partitions Prelaminated board bwp phenol bonded exterior/interion grade both sides. 12mm thick including carriage of material within all leads and lifts. | 14.7 | Sqm. | |
| 18 | 12 | Providing and fixing galvanised M.S. wire gauge of IS gauge designation 140 g with wire of dia 0.71 mm to windows and clerestory windows including beading of aluminium including carriage of material within all leads and lifts. | 28.26 | Sqm. | |
| 19 | 13 | Providing and fixing 1 mm thick M.S sheet garrage door with frame of 40 mmX 40mm X6mm angle iron 3.15 mm m.s gusset plates at the junctions and corners,all necessary fittings complete including applying a priming coat of red lead paint. Using Flats 30 mmX6 mm for diagonal braces and central cross pieces including carriage of material within all leads and lifts. | 3.15 | Sqm. | |
| 20 | 14 | Providing and fixing anodised / dyed aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. including carriage of material within all leads and lifts. | 67.79 | Kg. | |
| 21 | 15 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc., complete: including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. a) 300X16 mm | 6 | Each | |
| 22 | 16.01 | Providing and fixing anodized aluminium tower bolt (barrel type) anodized transparent or dyed to required shade and colour with screws etc., complete including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. ( a). 250x10mm | 12 | Each | |
| 23 | 16.02 | ( b). 200x10mm (Two Hundred into Ten milimetre) | 64 | Each | |
| 24 | 17.01 | Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc., complete: including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (i) 125mm.( One Hundred Twenty Five milimetre) | 12 | Each | |
| 25 | 17.02 | (i) 100mm.( One Hundred milimetre) | 64 | Each | |
| 26 | 18 | Half brick work using common burnt clay building bricks in super structure above plinth level upto floor all level using second class building bricks in cement mortar 1:4 (1cement : 4sand) including carriage of materials within all leads and lifts and as per the direction of Engineer in charge. | 24.97 | Sqm. | |
| 27 | 19 | 6mm (Six milimetre) cement plaster to ceiling in cement mortar 1:3 (One Cement is to three Sand) in all floor level. The rate isincluding carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. | 115.99 | Sqm. | |
| 28 | 20 | 15mm (fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. | 311.44 | Sqm. | |
| 29 | 21 | 15mm (fifteen milimetres) thick cement plasters in single coat on Fair side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. | 222.35 | Sqm. | |
| 30 | 22 | Applying Birla white wall care putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts | 649.78 | Sqm. | |
| 31 | 23 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of materials within all leads and lifts | 427.43 | Sqm. | |
| 32 | 24 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete. including carriage of materials within all leads and lifts | 222.35 | Sqm. | |
| 33 | 25 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With white enamel paint.or other than white including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. | 40.23 | Sqm. | |
| 34 | 26 | Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty doublecharged vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. including carriage of materials within all leads and lifts | 20.96 | Sqm. | |
| 35 | 27 | Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete. 25 mm thick. including carriage of materials within all leads and lifts | 72.03 | Sqm. | |
| 36 | 28 | Providing and laying granite stone in flooring 20mm(average) thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick including carriage of materials within all leads and lifts | 7 | Sqm. | |
| 37 | 29 | White glazed/ coloured digital tiles 6 mm ( six millimetre) thick in skirting risers of steps and dado of size 20×30cm nitco or its equivalent of approved make and size 12mm ( Twelve milimetre) thick cement mortar 1:3 (one cement isto three sand) and jointing with neat cement slurry including carriage of material in all leads and lifts | 8.1 | Sqm. | |
| 38 | 30 | Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement. including carriage of materials within all leads and lifts | 6.84 | Sqm. | |
| 39 | 31 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads and lifts | 28.14 | Sqm. | |
| 40 | 32 | Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X 10 mm X 2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X 40 mm X 6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint including carriage of materials within all leads and lifts | 5.25 | Sqm. | |
| 41 | 33 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paintIn gratings framed guard bars,ladders,railling,brackets and similar works including carriage of materials within all leads and lifts | 5.25 | Qtl | |
| 42 | 34 | Finishing with floating coat of neat cement slurry incluidng of material within all leads and lifts. | 28.8 | Sqm. | |
| 43 | 35 | Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished 40 mm thick including carriage of materials within all leads and lifts | 8 | Sqm. | |
| 44 | 36 | Construction chamber 300mm x 300mmx500mm inside size for stop cock with C.I. surface box 100mm x 100 mm x 75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 75mm thick foundation concrete 1:5:10 ( 1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete with 100 mm thick walls of brick masonry in cement mortar 1:5 (1 cement: 5 sand) including carriage of materials within all leads and lifts | 4 | Each | |
| 45 | 37.01 | Providing and fixing to wall ceilling and floor galvainised mild steeel tubes(medium grade)tube fittings and clamps including making good the wall including carriage of material within all leads and lifts. (a) 15 mm nominal bore. | 50 | Rmt | |
| 46 | 37.02 | (b) 20 mm nominal bore. | 50 | Rmt | |
| 47 | 38 | Making connection of galvainised steel distribution branch with galvainised mild steel main 20mm to 40mm nominal bore by providing and fixing Tee including cutting and threading the pipes complete including carriage of material within all leads and lifts. | 3 | Each | |
| 48 | 39 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm dia. including carriage of materials within all leads and lifts | 60 | Rmt | |
| 49 | 40 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. Plain bend 110 mm nominal size. including carriage of materials within all leads and lifts | 24 | Each | |
| 50 | 41 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. 110 mm dia including carriage of materials within all leads and lifts | 4 | Each | |
| 51 | 42 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm including carriage of materials within all leads and lifts | 5 | Each | |
| 52 | 43 | Providing and fixing Vitreous china wash down, water closet ( European type W.C pan) Cream shade with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(1 Cement :1 Sand ) ( Seat and over to be measured and paid for separately) including carriage of material within all leads and lifts. Ordinary closet.including carriage of materials within all leads and lifts | 2 | Each | |
| 53 | 44 | Providing and fixing PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.110mm dia including carriage of materials within all leads and lifts | 2 | Each | |
| 54 | 45 | Providing and fixing PTMT Coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material within all leads and lifts. | 2 | Each | |
| 55 | 46 | Providing and fixing GI inlet connection for flush pipe with WC pan including carriage of material within all leads and lifts. | 5 | Each | |
| 56 | 47 | Providing and fixing vitreous china wash basin Cream Shade with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings.Flat back630x450mm including carriage of material within all leads and lifts. | 3 | Each | |
| 57 | 48 | Providing and fixing CP brass waste for wash basin or sink 32 mm dia including carriage of material within all leads and lifts | 8 | Each | |
| 58 | 49 | Providing and fixing 100m sand cast iron grating for gully,foor or Nahani trap including carriage of material within all leads and lifts.. | 5 | Each | |
| 59 | 50 | Providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screw and washers including carriage of material within all leads and lifts. | 2 | Each | |
| 60 | 51 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden pluges with CP brass screws 600x20mm including carriage of material within all leads and lifts. | 1 | Each | |
| 61 | 52 | Providing and fixing CP brass bib tap with capastan head 15 mm dia. including carriage of material within all leads and lifts. | 9 | Each | |
| 62 | 53 | Providing and fixing CP brass pillar tap with capstan head 15 mm dia including carriage of material within all leads and lifts. | 3 | Each | |
| 63 | 54 | Providing and fixing CP stop cock 15mm dia including carriage of material within all leads and lifts. | 8 | Each | |
| 64 | 55 | Providing and fixing CP connection pipe with brass unions 30 cms length 15mm nominal size including carriage of material within all leads and lifts. | 5 | Each | |
| 65 | 56.01 | Providing and fixing brass full way valve with wheel including carriage of material within all leads and lifts. (1) 15mm nominal bore with Minimum Weight of 300 Gm. | 2 | Each | |
| 66 | 56.02 | II) 20mm nominal bore with Minimum Weight of 550Gm | 2 | Each | |
| 67 | 57.01 | Providing and fixing GI or MI union including carriage of material within all leads and lifts. (1)15mm nominal size | 2 | Each | |
| 68 | 57.02 | II) 20mm Nominal size | 2 | Each | |
| 69 | 58 | Providing and fixing charomium plated brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material within all leads and lifts.. | 6 | Each | |
| 70 | 59 | Providing and fixing laboratory sink with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings Vitreous china 600mm x 450mm x 150mm including carriage of materials within all leads and lifts | 3 | Each | |
| 71 | 60 | Providing and fixing PVC water storage tank double core 1000 ltr net capacity complete in all respect. including necessary fittings including carriage of material within all leads and lifts. | 1 | Each | |
| 72 | 61 | Providing and fixing Zet connection complete in all respect 15 mm Dia including carriage of material within all leads and lifts. | 2 | Each | |
| 73 | 62 | Providing and fixing plastic seat ( Solid/ Hollow type) and cover for wash down water closet with C.P brass hinges and rubber buffers including carriage of material within all leads and lifts. White plastic seat and cover. including carriage of materials within all leads and lifts | 2 | Each |
AI Tender Summary
Tender Timeline
Jul 10, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 31, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender