Military Engineer Services-MES has published Special Repair To Flooring Plastering And Wiring Etc Of Gp I B Godown Of Csd Depot At Ahmedabad Cantt. Submission Date for this Tender is 30-07-2020. Electrification Work Tenders in GE (Army) Ahmedabad Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Jul-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-07-2020 |
| Name of Work : SPL REPAIR TO FLOORING, PLASTERING & WIRING ETC OF GP-I (B) GODOWN OF CSD DEPOT AT AHMEDABAD CANTT (TENDER ID : 2020_MES_338654_2) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed by the EIC. | 700 | Sqm | |
| 2 | 2 | M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and fair without using extra cement complete all as specified and directed . | 300 | Sqm | |
| 3 | 3 | M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and fair without using extra cement complete all as specified and directed. | 400 | Sqm | |
| 4 | 4 | Taking down door / window / ventilators shutter only nexc 1.0 sq.m complete all as specified and directed. | 10 | Each | |
| 5 | 5 | M&L steel ventilators with TOP hung shutter including hinges, steel peg stay complete all as specified and directed. | 4 | sqm | |
| 6 | 6 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified. | 64 | Sqm | |
| 7 | 7 | M & L for preparation for newly plastered surface and applying two coats of distemper oil emulsion, white or tinted over a coat of primer alkali resitant on wall complete all as specified and directed | 400 | Sqm | |
| 8 | 8 | Complete removal of existing treatment on walls M & L applying two coats of distemper oil emulsion, white or tinted over a coat of primer alkali resitant on wall complete all as specified and directed | 400 | Sqm | |
| 9 | 9 | Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. | 932 | Sqm | |
| 10 | 10 | M&L for 50mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) including necessary form work as in flooring, surface finished even & smooth without using extra cement complete all as specified. | 932 | Sqm | |
| 11 | 11 | M & L for forming construction (Dummy) joints 65mm deep X 10mm wide, filled with sealing compound complete all as specified and directed . | 68 | 10RM | |
| 12 | 12 | M&L preparation of newly plastered surface and applying two coats of cement based paint including one coat of alkali resistant primer on walls. (note : chhajja and roof facia shall be in different colour) | 300 | sqm | |
| 13 | 13 | Complete removal of existing treatment and M&L two coat of cement base paint on old /new surface including one coat of alkali resistant primer on walls. (note : chhajja and roof facia shall be in different colour) | 400 | Sqm | |
| 14 | 14 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where directed complete all as specified or directed by the EIC | 6.75 | Cum | |
| 15 | 15 | M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate 75mm thick as in plinth protection including necessary form work and finishing surface even and smooth w/o using extra cement including bitumen joints complete all as specified. | 90 | Sqm | |
| 16 | 16 | Hacking out old broken glass (any thickness, size, quality or description) from steel frames and glazing with oil putty & pins/springs pins complete in squares n.exc 0.5 sqm each panes. | 20 | sqm | |
| 17 | 17 | S&F 3mm thick plain sheet glass ordinary quality and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes. | 25 | Sqm | |
| 18 | 18 | M&L guniting for shortcrete 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC/ CICO/ PIDILITE)@ 2% by weight of cement in equal proportion using short crete pumps and allied equipment,in thickness 30 mm (average) all as per manufactureres instruction including 5 mm thick plaster in CM1:3 for making surface even and fair also applying three coats of white wash on plastered surface. | 70 | Sqm | |
| 19 | 19 | S& F mild steel welded fabric of weight exe 2.5 Kg but n.exc. 4 Kg/ Sqm, fixed to steel members with spikes complete all as specified and as directedby Engineer-in Charge.(Upto 10 m height) | 237 | Kg | |
| 20 | 20 | S & F mild steel bars conforming to Fe 290 Gde E-165 as in guard bars or similar works including welding etc complete all as specified. | 50 | Kg | |
| 21 | 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed | 3.6 | Qtl | |
| 22 | 22 | S & F steel rolling shutters,thickness of laths 1.25mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; gear operated type with bevel gear box and crank handle with safety lever locks of mild steel with 4 levels for rolling shutter all as specified and directed | 36 | Sqm | |
| 23 | 23 | S& F in repair stainless steel air turbo ventilator of turbine dia 760mm,throat dia 610mm,ht 450mm with blades of aluminium0.5mm thick alloy avg. wt.6.50kg approx,fitted with nylon made typhonic bearing double top cap inverted cap design,complete all as specified and directed by Engr-in-charge | 13 | Each | |
| 24 | 24 | Taking down carefully surface aluminium point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete. | 124 | Point | |
| 25 | 25 | Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed / surface rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered for mounting of Modular switches, sockets, fan regulators complete as directed for the following :- | |||
| 26 | 25.1 | One light / Exhaust fan point controlled by one switch. | 67 | Point | |
| 27 | 25.2 | One fan point controlled by one switch. | 33 | Point | |
| 28 | 25.3 | One socket outlet 6 amp controlled by one switch on the same board with other switches. | 10 | Point | |
| 29 | 25.4 | One socket outlet 6 amp controlled by one switch on indepdendent board. | 10 | Point | |
| 30 | 26 | S&F sleek & curvy plates with elegant looks comes with sturdy support frame for solids strength of following size :- | |||
| 31 | 26.1 | Plates & frame 86x86, 1 module. Make : Legrand Part No : 673491 | 4 | Each | |
| 32 | 26.2 | Plates & frame 86x86, 2 module. Make : Legrand Part No : 673492 | 10 | Each | |
| 33 | 26.3 | Plates & frame 86x86, 4 module. Make : Legrand Part No : 673493 | 8 | Each | |
| 34 | 26.4 | Plates & frame 86x86, 8 module. Make : Legrand Part No : 673494 | 6 | Each | |
| 35 | 27 | Point wiring with 1100 volts grade PVC insulated FR multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with for one 16 amp socket outlet modular type for controlled by one switch on independent board complete. | 4 | Point | |
| 36 | 28 | S&F modular switch one way 6 amp 1 module all as per Legrand Mylinc cat ref no. 675501 or equivalent in Schneider Zencelo or MK Blenze as approved. | 120 | Each | |
| 37 | 29 | S&F modular switch one way 16 amp 1 module all as per Legrand Mylinc cat ref no. 675511 or equivalent in Schneider Zencelo or MK Blenze as approved. | 4 | Each | |
| 38 | 30 | S&F modular socket 6/16 - 2/3 pin combined 2 module all as per Legrand Mylinc cat ref no. 675555 or equivalent in Schneider Zencelo or MK Blenze as approved. | 4 | Each | |
| 39 | 31 | S&F modular socket 6 amp 2/3 pin combined 2 module all as per Legrand Mylinc cat ref no. 675552 or equivalent in Schneider Zencelo or MK Blenze as approved. | 20 | Each | |
| 40 | 32 | S&F ceiling rose 6 amp, 3 plates polycarbonate body complete. Make - Havells Reo / Anchor Penta PC / SSK as approved. | 100 | Each | |
| 41 | 33 | S&F modular hum free electronic step fan regulator, 100 watt 2 module all as per Legrand cat ref no. 675530 or equivalent in Schneider Zencelo or MK Blenze as approved. | 31 | Each | |
| 42 | 34 | S&F MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. Make : Ligrand/Havells/Standard | 1 | Each | |
| 43 | 35 | S&F MCB distribution board powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 54 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:- | |||
| 44 | 35.01 | SPN, 240 volts, 8 ways. Make - Legrand cat ref no 607711 or equivalent in Havells/ Standard as approved. | 4 | Each | |
| 45 | 36 | M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit 20 mm dia, medium grade, ISI marked ivory colour along with accessories of following nominal sizes 2x4 sqmm + 1x4 sqmm earth wire complete. | 65 | RM | |
| 46 | 37 | S&F Highbay/Mediumbay LED 80 watt energy seving, environment friendly and robust, IP 65, IK 07 luminaire with high efficacy of >150 lm/W with M16 x 1.5 gland for cable entry, made out of aluminium alloy pressure die casted housing, powder coated of colour munshell grey finish & control gear box of , tempered protective toughened glass, built in electronic driver with APFC, lower THD, open circuit protection, surge voltage protection upto 10KV with built in SPD as per IS 15885 part-2/sec 13, with mounting suspended by means of heavy duty nickel plate complete all as directed. Make : Havells, Model : Saucer, Cat No. BAYBRIGHTSAUCERHBP80W LED or equivalent in Philips / GE Lighting. | 19 | Each | |
| 47 | 38 | S&F LED batten (1.2m) made of CRCA shee housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per wall and total power conumption not more than 19 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make: Philips cat ref No ENDURALED BATTEN "BN 108C LED 2S PSU CDL WH" or equivalent in Havells or GE Lighting as approved. | 32 | Each | |
| 48 | 39 | S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Havells or GE Lighting as approved. | 16 | Each | |
| 49 | 40 | S&F Ceilling fan 1200mm sweep, Energy efficient high performance copper wounded , 5 star rated white in colour complete with accessories and fixing arrangement with 1.2 mtr long down rod and clamp etc. Make : Havells, Model : Energy saving (ESS40) (FHCES40WHT48) or equivalent in Bajaj or USHA. | 31 | Each | |
| 50 | 41 | S&F Wall fan 400mm sweep, 50 watt, 1350 RPM, white with 120 ribs guard better air delivery Pull cord control for speed & oscillation On-Off. Aerodynamically designed & balanced blades complete all as directed. Make: Havells Model : Swing or equivalent in Bajaj or USHA. | 2 | Each | |
| 51 | 42 | S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:- | |||
| 52 | 42.01 | Single pole 6 to 32 amp. Make : Legrand/Hager/Siemens | 24 | Each | |
| 53 | 42.02 | Double pole 10 to 32 amp. Make : Legrand/Hager/Siemens | 4 | Each | |
| 54 | 42.03 | Four pole 63 amp. Make - Legrand cat ref no 408702 or equivalent in Hager or Schneider as approved. | 1 | Each | |
| 55 | 43 | Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete. | 5 | Each | |
| 56 | 44 | Taking down carefully aluminium submain wiring with PVC surface conduit and making good disturbed surfaces complete. | 65 | RM | |
| 57 | 45 | M&L for pipe in pipe chemical earthing with GI Pipe electrode 3.0m long having outer pipe nominal dia 80 mm & inner pipe nominal dia 50 mm duly filled with highly conductive and anti corrosive compound of required quantity having chemical composition Bentonite 40% copper sulphate 20% Gypsom 5%, Graphite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% burried in ground by digging a bore of 150mm dia surrounded by soil friendly backfill compound non soluble in water including connection with G I strip 32x6 mm from pit to high mast light, making PCC pit of size 0.3m x 0.3m x 0.3m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40mm thick cover reinforced with 8mm dia MS bars 3 Nos both ways with lifting hook made out of 8 mm dia bar and testing on completion to achieve value not more than 1.0 ohm complete. | 1 | Each Set |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
