Municipal Council -MC has published Construction , Supply , Erection And Commissioning Of New Vegetable And Fish Market Of Diu ( Balance Work ) . Submission Date for this Tender is 27-07-2020. Civil Work Tenders in Diu Daman And Diu. Bidders can get complete Tender details and download the document.
| Name of Work: Construclion, Supply, Ereclion And Commlsslonlng of New Vegetoble ond flsh msrkef of Diu. (Eolonce Work). | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Civil Works : | |||
| 2 | 1.01 | (Civil Work) Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil | item1 | 47 | CUM |
| 3 | 1.02 | Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. Note : Local Available Sand to be used for filling. (Approved Exess quantity ) | item2 | 10 | CUM |
| 4 | 1.03 | Providing and laying in position machine batched and machine mixed\ndesign mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.\n(Note :- Cement content considered in this item is @ 330 kg/cum.\nExcess/less cement used as per design mix is payable/recoverable\nseparately).\nAll works above plinth level upto floor V level\nProviding M-30 grade concrete instead of M-25 grade BMC/\nRMC. (Note:- Cement content considered in M-30 is @ 340\nkg/cum) | item3 | 15 | Cmt |
| 5 | 1.04 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | item4 | 4 | CUM |
| 6 | 1.05 | Providing, hoisting and fixing up to floor five level precast reinforced cement\nconcrete in small lintels not exceeding 1.5 m clear span up to floor five\nlevel, including the cost of required centering, shuttering but excluding\nthe cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4\ngraded stone aggregate 20 mm nominal size). | item5 | 15 | Cmt |
| 7 | 1.06 | Demolishing stone rubble masonry manually/ by mechanical means\nincluding stacking of serviceable material and disposal of\nunserviceable material within 50 metres lead as per direction of\nEngineer-in-charge :\nIn lime mortar | item6 | 10 | cum |
| 8 | 1.07 | Demolishing stone rubble masonry manually/ by mechanical means\nincluding stacking of serviceable material and disposal of\nunserviceable material within 50 metres lead as per direction of\nEngineer-in-charge :\nIn Cement Mortar | item7 | 7.41 | cum |
| 9 | 1.08 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | item8 | 17.32 | Sqmt. |
| 10 | 1.09 | Centering and shuttering including strutting, propping etc. and removal\nof form for :\nWalls (any thickness) including attached pilasters, butteresses,\nplinth and string courses etc. | item9 | 5 | Sqm |
| 11 | 1.1 | Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts | item10 | 20 | Sqmt. |
| 12 | 1.11 | Supply installation of steel structure with providing and fixing of PVC coated polyester fabric with PVDF topcoat of Ferrari / Mehler / Hiraoka or equivalent (inclusive of procuring, design, non-linear structure analysis, static analysis for steel structure, patterning, nesting, seaming, fabrication, with SS cables, nuts and bolts, alloy D-shackles transportation and installation, inclusive of crimping etc. complete), steel structure as per approved design with two coat epoxy paint as per direction of Engineer-in-charge | item11 | 351.18 | Sqm |
| 13 | 1.12 | Finishing with Epoxy paint (two or more coats) at all locations\nprepared and applied as per manufacturer's specifications including\nappropriate priming coat, preparation of surface, etc. complete.\nOn steel work | item12 | 325 | Sq.Mt. |
| 14 | 1.13 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow\ntubes, channels, plates etc., including welding, grinding, buffing, polishing\nand making curvature (wherever required) and fitting the same with\nnecessary stainless steel nuts and bolts complete, i/c fixing the railing\nwith necessary accessories & stainless steel dash fasteners , stainless\nsteel bolts etc., of required size, on the top of the floor or the side of\nwaist slab with suitable arrangement as per approval of Engineer-in-charge,\n( for payment purpose only weight of stainless steel members shall be\nconsidered excluding fixing accessories such as nuts, bolts, fasteners etc.). | item13 | 848 | Kg. |
| 15 | 1.14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo- Mechanically Treated bars | item14 | 2400 | kg |
| 16 | 1.15 | Providing and fixing in position collapsible steel shutters with vertical\nchannels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,\nwith top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel\npulleys, complete with bolts, nuts, locking arrangement, stoppers,\nhandles, including applying a priming coat of approved steel primer.\nFinishing with Epoxy paint (two or more coats) at all locations\nprepared and applied as per manufacturer's specifications including\nappropriate priming coat, preparation of surface, etc. complete.\nOn steel work | item15 | 65 | Sqm |
| 17 | 1.16 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.\n 80x1.25 mm M.S. laths with 1.25 mm thick top cover | item16 | 810.53 | Sqm |
| 18 | 1.17 | Providing and fixing ball bearing for rolling shutters. | item17 | 68 | Each |
| 19 | 1.18 | Extra for providing mechanical device chain and crank operation for\noperating rolling shutters.\nExceeding 10.00 sqm and upto 16.80 sqm in the area | item18 | 32 | Sqm |
| 20 | 1.19 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. | item19 | 80 | Each |
| 21 | 1.2 | Provdg. 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)\nfor interior plastering upto any floor level and finished even and smooth as directed by Engineer In Charge | item20 | 23.5 | Sqm |
| 22 | 1.21 | \nProviding and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Granite of any colour and shade\nArea of slab upto 0.50 sqm | item21 | 250 | sqm |
| 23 | 1.22 | \nProviding and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Granite of any colour and shade\nArea of slab over 0.50 sqm | item22 | 142 | sqm |
| 24 | 1.23 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. | item23 | 900 | rmt |
| 25 | 1.24 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (Approved Excess Quantity) | item24 | 99.5 | Each |
| 26 | 1.25 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | item25 | 45.94 | Sqm |
| 27 | 1.26 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.\nSize of Tile 600x600 mm | item26 | 1450 | Sqm |
| 28 | 1.27 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge\nSize of Tile 600 x 600 mm | item27 | 1450 | Sqm |
| 29 | 1.28 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | item28 | 541.2 | sqm |
| 30 | 1.29 | Providing and laying water proofing treatment on roofs of slabs by\napplying cement slurry mixed with water proofing cement compound\nconsisting of applying: a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. | item29 | 29.62 | Sqm |
| 31 | 1.3 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.\n30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | item30 | 100 | sqm |
| 32 | 1.31 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust\nfree, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :\nFor fixed portion \nAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | item31 | 1200 | Kg. |
| 33 | 1.32 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust\nfree, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :\nFor shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | item32 | 1025.1 | Kg. |
| 34 | 1.33 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):\nWith float glass panes of 5.50 mm thickness | item33 | 680 | Sqm |
| 35 | 1.34 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):\nWith float glass panes of 8 mm thickness | item34 | 112 | Sqm |
| 36 | 1.35 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness | item35 | 18 | Each |
| 37 | 1.36 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper\netc.to be paid separately). | item36 | 50 | Sqm |
| 38 | 1.37 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :\n125x64x2.50 mm | item37 | 66 | Each |
| 39 | 1.38 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :\n100x60x2.50 mm | item38 | 90 | Each |
| 40 | 1.39 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : \n75x50x2.50 mm | item39 | 57 | Each |
| 41 | 1.4 | \nProviding and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :\n250x10 mm | item40 | 20 | Each |
| 42 | 1.41 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10 mm | item41 | 20 | Each |
| 43 | 1.42 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :\n150x10 mm | item42 | 20 | Each |
| 44 | 1.43 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :\n100x10 mm | item43 | 20 | Each |
| 45 | 1.44 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | item44 | 50 | Each |
| 46 | 1.45 | Providing and fixing bright finished brass handles with screws etc. complete :\n125 mm | item45 | 60 | Each |
| 47 | 1.46 | Providing and fixing bright finished brass handles with screws etc. complete :\n100 mm | item46 | 60 | Each |
| 48 | 1.47 | Providing and fixing bright finished brass handles with screws etc. complete : \n75 mm | item47 | 22 | Each |
| 49 | 1.48 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.\nOn steel work | item48 | 50 | Sqm |
| 50 | 1.49 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.\nTwo coats | item49 | 10026 | Sqm |
| 51 | 1.5 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.\nWith ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre | item50 | 400 | Sqm |
| 52 | 1.51 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.\nWith water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | item51 | 250 | Sqm |
| 53 | 1.52 | Finishing walls with textured exterior paint of required shade : \nNew work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied\n@ 2.20kg/10 sqm | item52 | 3249 | sqm |
| 54 | 1.53 | Finishing walls with Acrylic Smooth exterior paint of required shade after thoroughly orushing the surface to remove all dirt & remain of loose powdered materials:\nNew work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) | item53 | 200 | Smt |
| 55 | 1.54 | Finishing walls with Premium Acrylic Smooth exterior paint with\nSilicone additives of required shade :\nNew work (Two or more coats applied @ 1.43 ltr/ 10 sq m over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) | item54 | 210 | Smt |
| 56 | 1.55 | Internal Wiring \nSupply, installation, connection, testing & commissioning of following outlet points as per Specification & IS. The unit rate for the point shall consist of the circuit wiring from LDB or switch board to outlet point through MCB / switch as required & including the outlet points with connector & sockets as per specification.\nAll the wiring, outlet points shall be done in a surface / concealed manner with ISI approved medium duty, rigid FR PVC, ISI conduit of minimum 25 mm. dia. using 650 V FRLS copper conductor wire, modular switches with suitable plate, PVC / Metal back box with brass chromium / cadmium plated machine screws etc.\nScope also includes the additional space in SB for further expantion, Space should be atlest for 2 nos. of 15 amp Plug & Switch.\nPoint Wiring\nWiring for the following light points with 3nos. 1.5 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted 25 mm dia medium gauge PVC Conduit including providing and fixing of 6 amps single pole rocker operated flush mounted switch of approved quality color make & design in 2 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire.Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked FRLS PVC insulated multistrand copper wires, with pipe duly erected complete with 6A Tissino type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling. | item55 | 20 | no |
| 57 | 1.56 | Primary light point controlled by one SP MCB (Double height light point only) | item56 | 10 | no |
| 58 | 1.57 | Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked FRLS PVC insulated multistrand copper wires, with pipe duly erected complete with earth continuity and necessary connection with primary light with accessories erected on Metal/ PVC box covered with 3 mm thick laminated sheet for concealed wiring. | item57 | 39 | no |
| 59 | 1.58 | Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & eirthwire of 1.5 sq.mm (green) both are of .ISI marked FRLS PVC insulated multistrand copper wires, With pipe duly erected complete with 6A Tissino type switches and following type of accessories erected on PVC / Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling. \nPrimary light point controlled by two, two way 6 A switch | item58 | 10 | no |
| 60 | 1.59 | Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & eirthwire of 1.5 sq.mm (green) both are of .ISI marked FRLS PVC insulated multistrand copper wires, With pipe duly erected complete with 6A Tissino type switches and following type of accessories erected on PVC / Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling. \nSecondary light point controlled by same switch | item59 | 15 | no |
| 61 | 1.6 | Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked FRLS PVC insulated multistrand copper wires, in existing pipe duly erected complete with 6A Modular type switch and hum free EME 5/6 step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling | item60 | 20 | no |
| 62 | 1.61 | Wiring for the 250 volts single phase and neutral 6 amps switched socket outlet with 2.5 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted with 25 mm dia medium gauge PVC Conduit including providing and fixing of 6 amps 5 pin switch socket outlet of approved quality color make & design in PVC / 2 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire. \nOne 6 A x 5 pin 250 Volt socket outlet point controlled by one 6 A switch located on board. | item61 | 30 | no |
| 63 | 1.62 | Wiring for the 250 volts single phase and neutral 6 amps switched socket outlet with 2.5 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted with 25 mm dia medium gauge PVC Conduit including providing and fixing of 6 amps 5 pin switch socket outlet of approved quality color make & design in PVC / 2 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire. \n6 A x 5 pin 250 Volt switched socket outlet point at convenient location. ( Plug & Switch can be together or at different location) | item62 | 30 | no |
| 64 | 1.63 | Wiring for the 250 volts single phase and neutral 16 amps switched socket outlet with 2.5 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted 25 mm dia medium gauge PVC Conduit including providing and fixing of 16 amps 5 pin switch socket outlet of approved quality color make & design in 2 mm thick GI / PVC box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire. | item63 | 67 | no |
| 65 | 1.64 | Wiring for the UPS / Comp. / Raw Power outlet with 2 nos. of 250 volts single phase and neutral 16 amps switched socket outlet with 2.5 sq.mm x 3 core FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted Prelaid 25 mm dia medium gauge PVC Conduit / Race ways including providing and fixing of 2 no.s of 16 amps 5 pin switch socket outlet of approved quality color make & design in 2 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire. ( Maximum 3 nos. of Plugs can be looped in 1 Circuit) | item64 | 5 | no |
| 66 | 1.65 | Wiring for the Three phase and neutral 32 amps polycarbonate industrial 5 pin (IP 65/66) socket outlet with 32 amps Four pole MCB in a poly carbonate enclosure with 4 x 6 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted 50 mm dia medium gauge PVC Conduit including providing and fixing of 32 amps socket in poly carbonate enclosure and neutral & earthing pin of the socket and with FP MCB of approved quality color make & design in 2 mm thick GI box / polycarbonate enclosure and earthing of fixtures and the outlet box with 2 nos. of 2.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire. | item65 | 1 | no |
| 67 | 1.66 | Wiring for the Single phase and neutral 32 amps polycarbonate industrial 3 pin (IP 65/66) socket outlet with 32 amps Double pole MCB in a poly carbonate enclosure with 2 x 6 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted 25 mm dia medium gauge PVC Conduit including providing and fixing of 32 amps socket in poly carbonate enclosure and neutral & earthing pin of the socket and with DP MCB of approved quality color make & design in 2 mm thick GI box / polycarbonate enclosure and earthing of fixtures and the outlet box with 2 nos. of 2.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire. | item66 | 5 | no |
| 68 | 1.67 | Supply and laying of 32 mm rigid PVC pipe of 1.6-1.8 mm thickness | item67 | 250 | rmt |
| 69 | 1.68 | Supply and laying of 40 mm rigid PVC pipe of 1.6-1.8 mm thickness | item68 | 1500 | rmt |
| 70 | 1.69 | RACEWAYS & JUNCTION BOX\nProviding and fixing 2 mm thick steel sheet factory fabricated post galvanized raceway with internal partition of the following sizes including providing removable 3 mm thick GI cover, knock out holes and fixing accessories earthing with 8 SWG copper earth wire complete as required including floor supports, bends, access boxes, tap off boxes and cross over as per specification and site requirement.\nProviding and fixing 350 x 350 x 40 mm deep 2 mm thick GI sheet junction box including providing 3 mm thick stainless steel cover as per specification. | item69 | 5 | no. |
| 71 | 1.7 | Providing and fixing 250 x 250 x 40 mm deep 2 mm thick GI sheet junction box including providing 3 mm thick stainless steel cover as per specification. | item70 | 5 | no. |
| 72 | 1.71 | Providing and fixing 200 x 200 x 40 mm deep 1.6 mm thick GI sheet junction box including providing 3 mm thick stainless steel cover as per specification. | item71 | 5 | no. |
| 73 | 1.72 | MAINS : ( not for Point wiring )\nSupplying and Laying of mains with Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V with earth wires of Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in Suitable dia rigid PVC Pipe of Heavy Gauge ( Scope Also includes Supply of with. )\nSupplying and Laying of 4 nos. of 10 sq mm Cu. FRLS flexible wires with 2 nos 4 sqmm Cu. FRLS flexible wires to be drawn in 2 nos. of 40 mm dia Pipe | item72 | 100 | mtr |
| 74 | 1.73 | Supplying and Laying of 4 nos. of 6 sq mm Cu. FRLS flexible wires with 2 nos 2.5 sqmm Cu. FRLS flexible wires to be drawn in 2 nos. of 40 mm dia Pipe | item73 | 50 | mtr |
| 75 | 1.74 | Supplying and Laying of 2 nos. of 10 sq mm Cu. FRLS flexible wires with 1 nos 4 sqmm Cu. FRLS flexible wires to be drawn in 40 mm dia Pipe | item74 | 25 | mtr |
| 76 | 1.75 | Supplying and Laying of 2 nos. of 6 sq mm Cu. FRLS flexible wires with 1 nos 2.5 sqmm Cu. FRLS flexible wires to be drawn in 40 mm dia Pipe | item75 | 25 | mtr |
| 77 | 1.76 | Supplying and Laying of 2 nos. of 2.5 sq mm Cu. FRLS flexible wires with 1 nos 1.5 sqmm Cu. FRLS flexible wires to be drawn in 25 mm dia Pipe | item76 | 250 | mtr |
| 78 | 1.77 | Distribution Board\nSupply, Assembling, grouting, leveling Connecting & testing D.B of IP 43 of specified make\nDistribution Board-VTPN\nSupply, Erecting, testing and commissioning of only VTPN D.B. PPI type with space for FPMCCB as incoming and space for DPELMCB and 12 TPMCB as outgoing per phase (i.e. 12 way VTPN D.B.) of Legrand Make Cat. No. 607915 | item77 | 1 | no |
| 79 | 1.78 | Distribution Board\nSupply, Assembling, grouting, leveling Connecting & testing D.B of IP 43 of specified make\nSupply, Erecting, testing and commissioning of only VTPN D.B. PPI type with space for FPMCB as incoming and space for DPELMCB and 8 TPMCB as outgoing per phase (i.e. 8 way VTPN D.B.) of Legrand Make Cat. No. 607751 | item78 | 2 | no |
| 80 | 1.79 | Distribution Board\nSupply, Assembling, grouting, leveling Connecting & testing D.B of IP 43 of specified make\nDistribution Board-TPN\nSupply, Erecting, testing and commissioning of only TPN D.B. PPI type with space for FPMCB as incoming and space for DPELMCB and 12 SPMCB as outgoing per phase (i.e. 16 way per phase D.B.) of Hensel Make KV9354M | item79 | 1 | no |
| 81 | 1.8 | Supply, Erecting, testing and commissioning of only TPN D.B. PPI type with space for FPMCB as incoming and space for DPELMCB and 8 SPMCB as outgoing per phase (i.e. 12 way per phase D.B.) of Hensel Make KV9448M | item80 | 2 | no |
| 82 | 1.81 | Supply, Erecting, testing and commissioning of only TPN D.B. PPI type with space for FPMCB as incoming and space for DPELMCB and 4 SPMCB as outgoing per phase (i.e. 8 way per phase D.B.) of Hensel Make KV9336M | item81 | 5 | no |
| 83 | 1.82 | Distribution Board-SPN \nSupply, Erecting, testing and commissioning of SPN D.B. PPI type with space for DPELMCB as incoming and 8 SPMCB as outgoing per phase (i.e. 12 way D.B.) of Legrand make 607712 | item82 | 5 | no |
| 84 | 1.83 | MCB\nAll MCB's, ELMCB's, ELCB's should be of 10 KA only\n6 to 32 A SP MCB | item83 | 256 | no |
| 85 | 1.84 | MCB\nAll MCB's, ELMCB's, ELCB's should be of 10 KA only\n6 to 32 A DP MCB | item84 | 34 | no |
| 86 | 1.85 | MCB\nAll MCB's, ELMCB's, ELCB's should be of 10 KA only\n25 A / 100 mA DP ELMCB | item85 | 44 | no |
| 87 | 1.86 | MCB\nAll MCB's, ELMCB's, ELCB's should be of 10 KA only\n32 A / 100 mA DP ELMCB | item86 | 15 | no |
| 88 | 1.87 | MCB\nAll MCB's, ELMCB's, ELCB's should be of 10 KA only\n40 A / 100 mA DP ELMCB | item87 | 10 | no |
| 89 | 1.88 | MCB\nAll MCB's, ELMCB's, ELCB's should be of 10 KA only\n63 A / 100 mA DP ELMCB | item88 | 5 | no |
| 90 | 1.89 | MCB\nAll MCB's, ELMCB's, ELCB's should be of 10 KA only\n6 to 32 A TP MCB | item89 | 12 | no |
| 91 | 1.9 | MCB\nAll MCB's, ELMCB's, ELCB's should be of 10 KA only\n40 A TP MCB | item90 | 12 | no |
| 92 | 1.91 | MCB\nAll MCB's, ELMCB's, ELCB's should be of 10 KA only\n63 A TP MCB | item91 | 12 | no |
| 93 | 1.92 | MCB\nAll MCB's, ELMCB's, ELCB's should be of 10 KA only\n25 A FP MCB | item92 | 3 | no |
| 94 | 1.93 | MCB\nAll MCB's, ELMCB's, ELCB's should be of 10 KA only\n32 A FP MCB | item93 | 5 | no |
| 95 | 1.94 | MCB\nAll MCB's, ELMCB's, ELCB's should be of 10 KA only\n40 A FP MCB | item94 | 5 | no |
| 96 | 1.95 | MCB\nAll MCB's, ELMCB's, ELCB's should be of 10 KA only\n63 A FP MCB | item95 | 3 | no |
| 97 | 1.96 | 125 Amp. FP MCCB ( 16 KA ) with Spreader Link | item96 | 3 | no |
| 98 | 1.97 | Sheet steel enclosure for DP MCB | item97 | 100 | no |
| 99 | 1.98 | Sheet steel enclosure for FP MCB | item98 | 5 | no |
| 100 | 1.99 | 125 Amp. MCCB ( 16 KA ) with the Enclosure & Both Side Cable end Box with the Handle with Spreader Link with On off Indicating Lamp | item99 | 3 | no |
| 101 | 2 | Cables\nSupply, Installation, Testing, Laying, Commissioning of following 1100 volt grade XLPE insulated PVC sheathed aluminum / Copper conductor armored cables as per (IS:7098)(I)-88 ISI marked & specification in trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning with identification tags at every 10 mtr. & Both ends. with All the fixing accessories, excavation Back filling & Cable protection with Bricks as per the drawing ( If required ).\n70 sq.mm x 3.5c Al. XLPE Arm. Cable | item100 | 100 | mt |
| 102 | 2.01 | Cables\nSupply, Installation, Testing, Laying, Commissioning of following 1100 volt grade XLPE insulated PVC sheathed aluminum / Copper conductor armored cables as per (IS:7098)(I)-88 ISI marked & specification in trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning with identification tags at every 10 mtr. & Both ends. with All the fixing accessories, excavation Back filling & Cable protection with Bricks as per the drawing ( If required ).\n25 sq.mm x 4c Al. XLPE Arm. Cable | item101 | 75 | mt |
| 103 | 2.02 | Cables\nSupply, Installation, Testing, Laying, Commissioning of following 1100 volt grade XLPE insulated PVC sheathed aluminum / Copper conductor armored cables as per (IS:7098)(I)-88 ISI marked & specification in trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning with identification tags at every 10 mtr. & Both ends. with All the fixing accessories, excavation Back filling & Cable protection with Bricks as per the drawing ( If required ).\n10 sq.mm x 4c Al. XLPE Arm. Cable | item102 | 50 | mt |
| 104 | 2.03 | Cable Termination\nSITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor armored cables of 1100 volt grade including supplying and fixing of bimetallic Long neck crimping lugs, Double Compression Brass glands with earthing.\nCable Termination\nSITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor armored cables of 1100 volt grade including supplying and fixing of bimetallic Long neck crimping lugs, Double Compression Brass glands with earthing.\n70 sq.mm x 3.5 c Al. XLPE Arm. Cable | item103 | 8 | no |
| 105 | 2.04 | Cable Termination\nSITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor armored cables of 1100 volt grade including supplying and fixing of bimetallic Long neck crimping lugs, Double Compression Brass glands with earthing.\n25 sq.mm x 4c Al. XLPE Arm. Cable | item104 | 6 | no |
| 106 | 2.05 | Cable Termination\nSITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor armored cables of 1100 volt grade including supplying and fixing of bimetallic Long neck crimping lugs, Double Compression Brass glands with earthing.\n16 sq.mm x 4c Al. XLPE Arm. Cable | item105 | 8 | no |
| 107 | 2.06 | Cable Termination\nSITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor armored cables of 1100 volt grade including supplying and fixing of bimetallic Long neck crimping lugs, Double Compression Brass glands with earthing.\n10 sq.mm x 4c Al. XLPE Arm. Cable | item106 | 6 | no |
| 108 | 2.07 | Light Fixtures & Fans\nSupply, installation, Testing & Commissioning of Light Fixtures with all necessary Lamps, Ballast etc.. Complete in all Respect Contractor has to supply the fitting as per architect / Consultants final approval. ( all the lamps should be of intermediate color only)\n1 x 28 W type light fixture with 28W lamp of Philips make TWG 207 / 1 x TL5 28W Adreno V2 | item107 | 140 | no |
| 109 | 2.08 | 1 x 11 watt mirolta type light fixture with lamp equivalent to Philips make FMS200/111 | item108 | 10 | no |
| 110 | 2.09 | Any kind of Light Fixture with Basic Rate of Rs.1500/- | item109 | 10 | no |
| 111 | 2.1 | Any kind of Light Fixture with Basic Rate of Rs.5000/- | item110 | 20 | no |
| 112 | 2.11 | Any kind of Light Fixture with Basic Rate of Rs.15000/- | item111 | 10 | no |
| 113 | 2.12 | Supply, Installation, testing and commissioning of Fans without fan regulator.\n48" dia sweep high speed high breeze ceiling fans white in color. | item112 | 5 | no |
| 114 | 2.13 | Exhaust Fans :\nSITC of light duty propeller 225mm dia exhaust fans | item113 | 5 | no |
| 115 | 2.14 | Street Light Fixture\nDocumentation & Certification from accredited international & national laboratories / agencies shall be provided by the manufacturer / contractor for the luminaries.\nLuminaries with all electrical accessories & it should be energy efficient, low loss, ortho cyclically wound open construction copper ballast (Ballast should be Step dimming with Timer as per detailed specification for 400 watt, 250 watt & 150 watt fitting), ignitor & power factor improvement capacitor etc are prewired up to the terminal block & mounted on a removable control gear module for ease of maintenance. All electrical connections of the control gear module with the rest of the luminaries should be click fix & foolproof & require use of no tools. Mounting options should be for both lateral as well as pole top mounting. Luminaries must have sufficient space & proper arrangement to accommodate the step dimming ballast with timer.\nIP 65 post top lantern with 70 watt CDM-T lamp including control gear, all accessories, complete in all respect of Philips make Berlin or Schreder make Jasper | item114 | 10 | no |
| 116 | 2.15 | Earthing\nProviding and laying of following tined copper / GI plate electrode, with 2 Nos 50 x 6 mm copper strips from earth plate electrode to inspection chamber, 50 mm dia medium class GI pipe, CI funnel with 20 gauge GI wire mesh, masonry chamber 1000 x 500 mm with concrete base C I heavy duty / chequered plate manhole cover with frame painted with bitumastic paint and packing with mixture of charcoal and common salt around plate electrode including digging of pit up to permanent moisture level and as per soil condition but not less than 3 meters and back filling as required.\n600 x 600 x 3.15 mm cu.plate | item115 | 1 | no |
| 117 | 2.16 | Providing & doing earthing electrode for equipment earthing as specified in IS:3043 - 1987 for equipment complete with :\nEarthing Electrode Cu. Type - 19, 50 MM. Dia 3 Mtr. Long. ( OBO Betterman / Ashlok / LPI Make )\nContractor is responsible to achieve the Earthing Resistance less than 1 Ohm. | item116 | 2 | no |
| 118 | 2.17 | Earth wire/strips :\nSupply and laying cu. earthing strips for interconnecting the earthing stations, panels, DB's etc. in built up trenches, on walls/ceiling, buried in ground generally as specified and shown on drawings complete with : fixing accessories\nCorrosion protection of buried conductors with bituminous coating and covered with PVC tapes.\n25 x 3 mm cu. Tape | item117 | 100 | mtr. |
| 119 | 2.18 | Supplying and Laying mains with 1 no. of 6 sq mm Cu. PVC insulated FRLS flexible wire ( Green Color Only )\nSITC of Water Tight Junction Box of Hensel make Cat. No. KG9003IN or equivalent. With necessary clamp for mounting of the J.B. ( All the cable / wire connections to the JB shall be with the Water tight Glands only ) | item118 | 3 | no |
| 120 | 2.19 | Telephone Distribution\nProviding and installing of all conduiting and structured cabling for telephone system including providing and fixing of the following: \nAll necessary specials and fittings\nApproved cover plates for inspection, junction and outlet boxes.\n2 mm thick outlet boxes and junction boxes.\nAll fixing accessories such as clips, nails, screws etc.\nProviding and fixing approved saddles, hooks and grouting the same as required, in the case of all exposed conduit work.\nEmbedding conduits and accessories in wall, floors etc. during construction and / or cutting chases and making good as necessary in the case of all concealed conduit work.\nSupply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet steel enclosure complete as required.\n10 pair Krone type tag block | item119 | 1 | no |
| 121 | 2.2 | Telephone Distribution\nProviding and installing of all conduiting and structured cabling for telephone system including providing and fixing of the following: \nAll necessary specials and fittings\nApproved cover plates for inspection, junction and outlet boxes.\n2 mm thick outlet boxes and junction boxes.\nAll fixing accessories such as clips, nails, screws etc.\nProviding and fixing approved saddles, hooks and grouting the same as required, in the case of all exposed conduit work.\nEmbedding conduits and accessories in wall, floors etc. during construction and / or cutting chases and making good as necessary in the case of all concealed conduit work.\nSupply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet steel enclosure complete as required.\n5 pair Krone type tag block | item120 | 1 | no |
| 122 | 2.21 | PVC & HDPE Conduits\nSupply & laying of 25 mm dia. rigid PVC conduit of 2.0-2.2 mm thick heavy gauge with all accessories. | item121 | 100 | mtr |
| 123 | 2.22 | Supply & laying of 40 mm dia. rigid PVC conduit of 2.1 -2.3 mm thick medium gauge with all accessories. | item122 | 50 | mtr |
| 124 | 2.23 | Telephone Point Wiring\nSupply and laying of specified make 0.51 mm dia Tinned copper telephone wire of specified make to be done in prelaid PVC pipe of 25 mm dia/raceway of specified make, but without the cost of pipe or raceway. (the wire is to be drawn from Krone connector of respective area to outlet point )\n10 pair telephone wire | item123 | 110 | mtr |
| 125 | 2.24 | Telephone Point Wiring\nSupply and laying of specified make 0.51 mm dia Tinned copper telephone wire of specified make to be done in prelaid PVC pipe of 25 mm dia/raceway of specified make, but without the cost of pipe or raceway. (the wire is to be drawn from Krone connector of respective area to outlet point )\n5 pair telephone wire | item124 | 50 | mtr |
| 126 | 2.25 | Supply and laying of specified make Cat 6 wire of specified make to be done in prelaid PVC pipe of 25 mm dia / raceway of specified make, but without the cost of raceway or pipe ( the wire is to be drawn from HUB \ Switch of respective area to outlet point ) with the cost of the crimping with material | item125 | 50 | mtr |
| 127 | 2.26 | Telephone Outlet Point\nSupply and installation of flush mounted Category 6 T 568 A or B outlet. The plastic shall be high impact, flame-retardant UL rated thermoplastic. Dust cover / Blank shall be provided to protect unused face plate openings. Termination cap and plastic cover shall be provided to protect jack wiring.\none telephone point to be done with telephone outlet socket RJ-11 (jack type) and box of the specified make. | item126 | 5 | no |
| 128 | 2.27 | one Data I/O point to be done with data outlet socket of RJ-45 and Face Plate, box of the specified make. | item127 | 5 | no |
| 129 | 2.28 | Miscellaneous\nSupplying & Erecting conventional type Carbon Dioxide fire extinguishers of ISI approved of 4.5 kgs | item128 | 5 | no |
| 130 | 2.29 | Supplying & Erecting automatic emergency light with maintenance free battery for 20 watts tube. | item129 | 2 | no |
| 131 | 2.3 | Supplying & Erecting Rubber mat 1.1 KV 1000 x 2000 x 6 mm | item130 | 5 | Sq. Mtr. |
| 132 | 2.31 | Providing and erecting danger notice board for medium voltage installation to be erected as per I.S. The board should be 150 x 150 mm. | item131 | 2 | no |
| 133 | 2.32 | Providing printed instruction chart both in English & REGIONAL LANGUAGE & duly framed out on glass for treatment of person suffering from Electric shock. | item132 | 2 | no |
| 134 | 2.33 | Supply & installation of 6 Mtr (Approx 20') high G.I. decorative Conical Column 4.0 mtr height above the ground level having top 75.0mm O.D. &bottom 140.0mmO.D. with avg. thickness of 3.0mm. The column shall also be provided with flush door at the bottom with proper strengthening to the cutout of the door opening. A junction/ looping box with 32 Amps heavy duty connector shall be built into the pole. street light pole with Single Arm Bracket / arrangement for the top mounting fixture as per drawing.\n1) 4 way connector and 6A MCB\n2) 50 mm diameter DWC pipe for each cable entry. Pipe length is up to 3.5 mtr. Per cable\n3) Wiring up to the light fixture from the junction box using 3core x 1.5 sq.mm. flexible copper wires / Fixture of specified make. \n4) Concrete coping with foundation bolt with base plate with stiffener.\n5) Spiral/Coil Type Earthing from the 8 swg Cu. Wire of 2.5 mtr. With the suitable size pipe with clamps and painting.\n6) Radium strip of two color at suitable height & Pole Numbering as per Client / Consultant's instruction\n7) Excavation & back filling for erection of poles. Debris to be removed from the site to suitable location as per the instruction of the engineer in charge | item133 | 10 | no |
| 135 | 2.34 | Supplying , fabricating and installation of various sizes MS race way / junction boxes/clamps/hangers for Cable Tray, Light Fixture made out ot specified size sheet/Angle/Flat/rod/ channel etc as per design with all necessary accessories like bend, juncation boxes, coupler, Anchor fastner, Bolt Nuts, etc.. & work from MS structure for other work with anchor fastner of Hilti make and necessary hardware with necessary welding has to be done to complete the job from ISA / ISMC / PLATE. The job also includes to paint the structure with two coats of red oxide and two coats color of enamel paint as approved and recommended by consultant. Complete in all respect to be installed at any height with all necessary arrangements. Contractor has to complete the work up to satisfaction of Consultant | item134 | 500 | Kg |
| 136 | 2.35 | Providing and fixing water closet squatting pan (Indian type W.C.\npan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white\nP.V.C. flushing cistern, including flush pipe, with manually controlled\ndevice (handle lever) conforming to IS : 7231, with all fittings and\nfixtures complete, including cutting and making good the walls and\nfloors wherever required : \nWhite Vitreous china Orissa pattern W.C. pan of size\n580x440 mm with integral type foot rests | item135 | 2 | each |
| 137 | 2.36 | Providing and fixing water closet squatting pan (Indian type W.C.\npan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white\nP.V.C. flushing cistern, including flush pipe, with manually controlled\ndevice (handle lever) conforming to IS : 7231, with all fittings and\nfixtures complete, including cutting and making good the walls and\nfloors wherever required :\nStainless Steel AISI-304(18/8) Orissa pattern W.C. pan\nof size 585x480 mm with flush pipe and integrated type\nfoot rests | item136 | 2 | each |
| 138 | 2.37 | Providing and fixing white vitreous china pedestal type water closet\n(European type W.C. pan) with seat and lid, 10 litre low level white\nP.V.C. flushing cistern, including flush pipe, with manually controlled\ndevice (handle lever), conforming to IS : 7231, with all fittings and\nfixtures complete, including cutting and making good the walls and\nfloors wherever required :\nW.C. pan with ISI marked white solid plastic seat and lid | item137 | 1 | each |
| 139 | 2.38 | Providing and fixing white vitreous china pedestal type water closet\n(European type W.C. pan) with seat and lid, 10 litre low level white\nP.V.C. flushing cistern, including flush pipe, with manually controlled\ndevice (handle lever), conforming to IS : 7231, with all fittings and\nfixtures complete, including cutting and making good the walls and\nfloors wherever required :\nW.C. pan with ISI marked black solid plastic seat and lid | item138 | 1 | each |
| 140 | 2.39 | Providing and fixing white vitreous china pedestal type water closet\n(European type) with seat and lid, 10 litre low level white vitreous\nchina flushing cistern & C.P. flush bend with fittings & C.I.brackets,\n40 mm flush bend, overflow arrangement with specials of standard\nmake and mosquito proof coupling of approved municipal design\ncomplete, including painting of fittings and brackets, cutting and\nmaking good the walls and floors wherever required :\nW.C. pan with ISI marked white solid plastic seat and lid | item139 | 30 | each |
| 141 | 2.4 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard\nmake and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid | item140 | 30 | each |
| 142 | 2.41 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern | item141 | 20 | each |
| 143 | 2.42 | Providing and fixing white vitreous china flat back half stall urinal of\nsize 580x380x350 mm with white PVC automatic flushing cistern,\nwith fittings, standard size C.P. brass flush pipe, spreaders with\nunions and clamps (all in C.P. brass) with waste fitting as per IS :\n2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls\nand floors wherever required :\nSingle half stall urinal with 5 litre P.V.C. automatic flushing cistern | item142 | 10 | each |
| 144 | 2.43 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | item143 | 50 | each |
| 145 | 2.44 | \nProviding and fixing wash basin with C.I. brackets, 15 mm C.P. brass\npillar taps, 32 mm C.P. brass waste of standard pattern, including\npainting of fittings and brackets, cutting and making good the walls\nwherever require :White Vitreous China Wash basin size 630x450 mm with\na single 15 mm C.P. brass pillar tap | item144 | 50 | each |
| 146 | 2.45 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass\npillar taps, 32 mm C.P. brass waste of standard pattern, including\npainting of fittings and brackets, cutting and making good the walls\nwherever require :\nWhite Vitreous China Wash basin size 550x400 mm with\na pair of 15 mm C.P. brass pillar taps | item145 | 25 | each |
| 147 | 2.46 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass\npillar taps, 32 mm C.P. brass waste of standard pattern, including\npainting of fittings and brackets, cutting and making good the walls\nwherever require :\nWhite Vitreous China Flat back wash basin size 550x\n400 mm with single 15 mm C.P. brass pillar tap | item146 | 25 | each |
| 148 | 2.47 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass\npillar taps, 32 mm C.P. brass waste of standard pattern, including\npainting of fittings and brackets, cutting and making good the walls\nwherever require :\nWhite Vitreous China Angle back wash basin size 600x\n480 mm with single 15 mm C.P. brass pillar tap | item147 | 25 | each |
| 149 | 2.48 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass\npillar taps, 32 mm C.P. brass waste of standard pattern, including\npainting of fittings and brackets, cutting and making good the walls\nwherever require :\nWhite Vitreous China Angle back wash basin size 400x\n400 mm with single 15 mm C.P. brass pillar tap | item148 | 10 | each |
| 150 | 2.49 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass\npillar taps, 32 mm C.P. brass waste of standard pattern, including\npainting of fittings and brackets, cutting and making good the walls\nwherever require :\nWhite Vitreous China Flat back wash basin size 450x\n300 mm with single 15 mm C.P. brass pillar tap | item149 | 10 | each |
| 151 | 2.5 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass\npillar taps, 32 mm C.P. brass waste of standard pattern, including\npainting of fittings and brackets, cutting and making good the walls\nwherever require :\nWhite Vitreous China Surgeon type wash basin of size\n660x460 mm with a pair of 15 mm C.P. brass pillar taps\nwith elbow operated levers | item150 | 1 | each |
| 152 | 2.51 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass\npillar taps, 32 mm C.P. brass waste of standard pattern, including\npainting of fittings and brackets, cutting and making good the walls\nwherever require :\nWhite Vitreous China Surgeon type wash basin of size\n660x460 mm with single 15 mm C.P. brass pillar taps\nwith elbow operated levers ISI marked | item151 | 1 | each |
| 153 | 2.52 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass\npillar taps, 32 mm C.P. brass waste of standard pattern, including\npainting of fittings and brackets, cutting and making good the walls\nwherever require :\nStainless Steel AISI-304(18/8) Round basin 405x355 mm\nwith single 15 mm C.P. brass pillar tap | item152 | 1 | each |
| 154 | 2.53 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass\npillar taps, 32 mm C.P. brass waste of standard pattern, including\npainting of fittings and brackets, cutting and making good the walls\nwherever require :\nStainless Steel AISI-304(18/8) Wash basin 530x345 mm\nwith single 15 mm C.P. brass pillar tap | item153 | 1 | each |
| 155 | 2.54 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain\nwith rubber plug, 40 mm C.P. brass waste complete, including painting\nthe fittings and brackets, cutting and making good the walls wherever\nrequired :\nWhite glazed fire clay kitchen sink of size 600x450x\n250 mm | item154 | 1 | each |
| 156 | 2.55 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as\nper IS : 13983 with C.I. brackets and stainless steel plug 40 mm,\nincluding painting of fittings and brackets, cutting and making good\nthe walls wherever required :\n610x510 mm bowl depth 200 mm | item155 | 1 | each |
| 157 | 2.56 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as\nper IS : 13983 with C.I. brackets and stainless steel plug 40 mm,\nincluding painting of fittings and brackets, cutting and making good\nthe walls wherever required :\n610x460 mm bowl depth 200 mm | item156 | 1 | each |
| 158 | 2.57 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as\nper IS : 13983 with C.I. brackets and stainless steel plug 40 mm,\nincluding painting of fittings and brackets, cutting and making good\nthe walls wherever required :\n470x420 mm bowl depth 178 mm | item157 | 1 | each |
| 159 | 2.58 | Providing and fixing white vitreous china water closet squatting pan\n(Indian type) :\nOrissa pattern W.C. pan of size 580x440 mm | item158 | 1 | each |
| 160 | 2.59 | Providing and fixing white vitreous china pedestal type (European\ntype/ wash down type) water closet pan. | item159 | 1 | each |
| 161 | 2.6 | Extra for using coloured pedestal type W.C pan (European type)\nwith low level cistern of same colour instead of white vitreous china\nW.C pan and cistern. | item160 | 1 | each |
| 162 | 2.61 | Providing and fixing P.V.C. low level flushing cistern with manually\ncontrolled device (handle lever) conforming to IS : 7231, with all fittings\nand fixtures complete.\n10 litre capacity - White | item161 | 1 | each |
| 163 | 2.62 | Providing and fixing controlled flush, low level cistern made of vitreous\nchina with all fittings complete.\n10 litre (full flush) capacity-white | item162 | 1 | each |
| 164 | 2.63 | Providing and fixing solid plastic seat with lid for pedestal type W.C.\npan complete :\nWhite solid plastic seat with lid | item163 | 1 | each |
| 165 | 2.64 | Providing and fixing P.V.C. waste pipe for sink or wash basin including\nP.V.C. waste fittings complete.\n40 mm dia | item164 | 100 | each |
| 166 | 2.65 | Flexible pipe\n40 mm dia | item165 | 100 | each |
| 167 | 2.66 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | item166 | 96 | each |
| 168 | 2.67 | Providing and fixing in position 25 mm diameter mosquito proof\ncoupling of approved municipal design | item167 | 10 | each |
| 169 | 2.68 | Providing and fixing mirror of superior glass (of approved quality) and\nof required shape and size with plastic moulded frame of approved\nmake and shade with 6 mm thick hard board backing :\nCircular shape 450 mm dia | item168 | 48 | each |
| 170 | 2.69 | Providing and fixing mirror of superior glass (of approved quality) and\nof required shape and size with plastic moulded frame of approved\nmake and shade with 6 mm thick hard board backing :\nRectangular shape 453x357 mm | item169 | 48 | each |
| 171 | 2.7 | Providing and fixing toilet paper holder\nC.P. brass | item170 | 32 | each |
| 172 | 2.71 | Providing and fixing soil, waste and vent pipes\n100 mm dia\nCentrifugally cast (spun) iron socket & spigot (S&S) pipe\nas per IS: 3989 | item171 | 12.8 | metre |
| 173 | 2.72 | Providing and fixing soil, waste and vent pipes\n100 mm dia\nCentrifugally cast (spun) iron socketed pipe as per\nIS: 3989 | item172 | 209.8 | metre |
| 174 | 2.73 | Providing and fixing M.S. holder-bat clamps of approved design to\nSand Cast iron/cast iron (spun) pipe embedded in and including\ncement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2\ncoarse sand : 4 graded stone aggregate 20 mm nominal size),\nincluding cost of cutting holes and making good the walls etc. :\nFor 100 mm dia pipe | item173 | 5 | each |
| 175 | 2.74 | Providing and fixing bend of required degree with access door, insertion\nrubber washer 3 mm thick, bolts and nuts complete.\n100 mm dia\nSand cast iron S&S as per IS - 3989 | item174 | 30 | each |
| 176 | 2.75 | Providing and fixing bend of required degree with access door, insertion\nrubber washer 3 mm thick, bolts and nuts complete.\n75 mm dia\nSand cast iron S&S as per IS - 3989 | item175 | 10 | each |
| 177 | 2.76 | Providing and fixing plain bend of required degree.\n100 mm dia\nSand cast iron S&S as per IS - 3989 | item176 | 50 | each |
| 178 | 2.77 | Providing and fixing plain bend of required degree.\n75 mm dia\nSand cast iron S&S as per IS - 3989 | item177 | 50 | each |
| 179 | 2.78 | Providing and fixing double equal junction of required degree with\naccess door, insertion rubber washer 3 mm thick, bolts and nuts\ncomplete :\n100x100x100x100 mm\nSand cast iron S&S as per IS - 3989 | item178 | 2 | each |
| 180 | 2.79 | Providing and fixing double equal junction of required degree with\naccess door, insertion rubber washer 3 mm thick, bolts and nuts\ncomplete :\n75x75x75 mm\nSand cast iron S&S as per IS - 3989 | item179 | 50 | each |
| 181 | 2.8 | Providing and fixing double equal plain junction of required degree.\n100x100x100x100 mm\nSand cast iron S&S as per IS - 3989 | item180 | 50 | each |
| 182 | 2.81 | Providing and fixing double equal plain junction of required degree.\n75x75x75x75 mm\nSand cast iron S&S as per IS - 3989 | item181 | 50 | each |
| 183 | 2.82 | Providing and fixing single equal plain junction of required degree\nwith access door, insertion rubber washer 3 mm thick, bolts and\nnuts complete.\n100x100x100x100 mm\nSand cast iron S&S as per IS - 3989 | item182 | 40 | each |
| 184 | 2.83 | Providing and fixing single equal plain junction of required degree\nwith access door, insertion rubber washer 3 mm thick, bolts and\nnuts complete.\n75x75x75x75 mm\nSand cast iron S&S as per IS - 3989 | item183 | 40 | each |
| 185 | 2.84 | Providing and fixing single equal plain junction of required degree\n100x100x100x100 mm\nSand cast iron S&S as per IS - 3989 | item184 | 40 | each |
| 186 | 2.85 | Providing and fixing single equal plain junction of required degree\n75x75x75x75 mm\nSand cast iron S&S as per IS - 3989 | item185 | 25 | each |
| 187 | 2.86 | Providing and fixing double unequal junction of required degree with\naccess door, insertion rubber washer 3 mm thick, bolts and nuts\ncomplete :\n100x100x75x75 mm\nSand cast iron S&S as per IS - 3989 | item186 | 5 | each |
| 188 | 2.87 | Providing and fixing single unequal junction of required degree with\naccess door, insertion rubber washer 3 mm thick, bolts and nuts\ncomplete :\n100x100x75 mm\nSand cast iron S&S as per IS - 3989 | item187 | 9 | each |
| 189 | 2.88 | Providing and fixing single equal plain invert branch of required degree\n100x100x100 mm\nSand cast iron S&S as per IS - 3989 | item188 | 25 | each |
| 190 | 2.89 | 75x75x75 mm\nSand cast iron S&S as per IS - 3989 | item189 | 25 | each |
| 191 | 2.9 | Providing and fixing sand cast iron S&S off sets as per IS: 3989\n75 mm off sets\nWith 75 mm dia pipe | item190 | 50 | each |
| 192 | 2.91 | \n150 mm off sets\nWith 75 mm dia pipe | item191 | 34 | each |
| 193 | 2.92 | 150 mm off sets\nWith 100 mm dia pipe | item192 | 24 | each |
| 194 | 2.93 | Providing and fixing collar :\n100 mm dia\nSand cast iron S&S as per IS - 3989 | item193 | 50 | each |
| 195 | 2.94 | Providing and fixing collar :\n75mm dia\nSand cast iron S&S as per IS - 3989 | item194 | 50 | each |
| 196 | 2.95 | Providing lead caulked joints to sand cast iron/centrifugally cast\n(spun) iron pipes and fittings of diameter :\n50mm dia pipe | item195 | 1 | each |
| 197 | 2.96 | Providing and fixing M.S. stays and clamps for sand cast iron/\ncentrifugally cast (spun) iron pipes of diameter :\n50mm dia pipe | item196 | 1 | each |
| 198 | 2.97 | Cutting chases in brick masonry walls for following diameter sand cast\niron/ centrifugally cast (spun) iron pipes and making good the same\nwith cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone\naggregate 12.5 mm nominal size), including necessary plaster and\npointing in cement mortar 1:4 (1 cement : 4 coarse sand) :\n100mm dia pipe | item197 | 17 | metre |
| 199 | 2.98 | Cutting chases in brick masonry walls for following diameter sand cast\niron/ centrifugally cast (spun) iron pipes and making good the same\nwith cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone\naggregate 12.5 mm nominal size), including necessary plaster and\npointing in cement mortar 1:4 (1 cement : 4 coarse sand) :\n75mm dia pipe | item198 | 12 | metre |
| 200 | 2.99 | Cutting chases in brick masonry walls for following diameter sand cast\niron/ centrifugally cast (spun) iron pipes and making good the same\nwith cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone\naggregate 12.5 mm nominal size), including necessary plaster and\npointing in cement mortar 1:4 (1 cement : 4 coarse sand) :\n50mm dia pipe | item199 | 1 | metre |
| 201 | 3 | Providing and fixing vitreous china dual purpose closet suitable for\nuse as squatting pan or European type water closet (Anglo Indian\nW.C pan) with seat & lid fixed with C.P. brass hinges and rubber\nbuffers, 10 litre low level flushing cistern with fitting and brackets,\n40 mm flush bend, 20 mm over flow pipe, with specials of standard\nmake and mosquito proof coupling of approved municipal design\ncomplete, including painting of fittings and brackets, cutting and\nmaking good the walls and floors wherever required :\nWhite vitreous china dual purpose WC pan with white\nsolid plastic seat and lid with white vitreous china flushing\ncistern and C.P. flush bend | item200 | 1 | each |
| 202 | 3.01 | Waste coupling 38 mm dia of 83 mm length and 77mm\nbreadth, weighing not less than 60 gms | item201 | 100 | each |
| 203 | 3.02 | Providing and fixing PTMT Bottle Trap for Wash basin and sink\nBottle trap 38 mm single piece moulded with height of\n270 mm, effective length of tail pipe 260 mm from the\ncentre of the waste coupling, 77 mm breadth with 25 mm\nminimum water seal, weighing not less than 263 gms | item202 | 100 | each |
| 204 | 3.03 | Providing and fixing PTMT liquid soap container 109 mm wide,\n125 mm high and 112 mm distance from wall of standard shape with\nbracket of the same materials with snap fittings of approved quality\nand colour, weighing not less than 105 gms. | item203 | 100 | each |
| 205 | 3.04 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,\n200 mm wide with minimum distances of 37 mm from wall face with\nconcealed fittings arrangement of approved quality and colour,\nweighing not less than 88 gms. | item204 | 100 | each |
| 206 | 3.05 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100\nmm with 1/2" BSP thread and shapes, weighing not less than\n60 gms. | item205 | 20 | each |
| 207 | 3.06 | Providing and fixing PTMT urinal cock of approved quality and colou\n15 mm nominal bore, 80 mm long, 42 mm high and 30mm\nwide with BSP female threads weighing not less than\n48 gms | item206 | 20 | each |
| 208 | 3.07 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE)\nComposite Pressure Pipes conforming to IS - 15450, U.V.\nstabilized with carbon black having thermal stability for hot & cold\nwater supply, capable to withstand temperature up to 80 0C, including\nall special fittings of composite material (engineering plastic blend\nand brass inserts wherever required) e.g. elbows, tees, reducers,\ncouplers & connectors etc., with clamps at 1.00 metre spacing.\nThis includes the costs of cutting chases and including testing of\njoints complete as per direction of the engineer in charge.\nConcealed work, including cutting chases and making good the\nwall etc\n1216 (16 mm OD) pipe | item207 | 100 | metre |
| 209 | 3.08 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE)\nComposite Pressure Pipes conforming to IS - 15450, U.V.\nstabilized with carbon black having thermal stability for hot & cold\nwater supply, capable to withstand temperature up to 80 0C, including\nall special fittings of composite material (engineering plastic blend\nand brass inserts wherever required) e.g. elbows, tees, reducers,\ncouplers & connectors etc., with clamps at 1.00 metre spacing.\nThis includes the costs of cutting chases and including testing of\njoints complete as per direction of the engineer in charge.\nConcealed work, including cutting chases and making good the\nwall etc\n1620 (20 mm OD) pipe | item208 | 250 | metre |
| 210 | 3.09 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE)\nComposite Pressure Pipes conforming to IS - 15450, U.V.\nstabilized with carbon black having thermal stability for hot & cold\nwater supply, capable to withstand temperature up to 80 0C, including\nall special fittings of composite material (engineering plastic blend\nand brass inserts wherever required) e.g. elbows, tees, reducers,\ncouplers & connectors etc., with clamps at 1.00 metre spacing.\nThis includes the costs of cutting chases and including testing of\njoints complete as per direction of the engineer in charge.\nConcealed work, including cutting chases and making good the\nwall etc\n2025 (25 mm OD) pipe | item209 | 300 | metre |
| 211 | 3.1 | Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE)\nComposite Pressure Pipes conforming to IS - 15450, U.V.\nstabilized with carbon black having thermal stability for hot & cold\nwater supply, capable to withstand temperature up to 80 0C, including\nall special fittings of composite material (engineering plastic blend\nand brass inserts wherever required) e.g. elbows, tees, reducers,\ncouplers & connectors etc., with clamps at 1.00 metre spacing.\nThis includes the costs of cutting chases and including testing of\njoints complete as per direction of the engineer in charge.\nConcealed work, including cutting chases and making good the\nwall etc\n2532 (32 mm OD) pipe | item210 | 200 | metre |
| 212 | 3.11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,\nhaving thermal stability for hot & cold water supply including all CPVC\nplain & brass threaded fittings This includes jointing of pipes & fittings\nwith one step CPVC solvent cement ,trenching ,refilling & testing of\njoints complete as per direction of Engineer in Charge.\nExternal work 15 mm nominal outer dia Pipes | item211 | 100 | metre |
| 213 | 3.12 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,\nhaving thermal stability for hot & cold water supply including all CPVC\nplain & brass threaded fittings This includes jointing of pipes & fittings\nwith one step CPVC solvent cement ,trenching ,refilling & testing of\njoints complete as per direction of Engineer in Charge.\nExternal work 20 mm nominal outer dia Pipes | item212 | 29 | metre |
| 214 | 3.13 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,\nhaving thermal stability for hot & cold water supply including all CPVC\nplain & brass threaded fittings This includes jointing of pipes & fittings\nwith one step CPVC solvent cement ,trenching ,refilling & testing of\njoints complete as per direction of Engineer in Charge.\nExternal work 25 mm nominal outer dia Pipes | item213 | 1.6 | metre |
| 215 | 3.14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,\nhaving thermal stability for hot & cold water supply including all CPVC\nplain & brass threaded fittings This includes jointing of pipes & fittings\nwith one step CPVC solvent cement ,trenching ,refilling & testing of\njoints complete as per direction of Engineer in Charge.\nExternal work 30 mm nominal outer dia Pipes | item214 | 300 | metre |
| 216 | 3.15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,\nhaving thermal stability for hot & cold water supply including all CPVC\nplain & brass threaded fittings This includes jointing of pipes & fittings\nwith one step CPVC solvent cement ,trenching ,refilling & testing of\njoints complete as per direction of Engineer in Charge.\nExternal work 40 mm nominal outer dia Pipes | item215 | 2.2 | metre |
| 217 | 3.16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,\nhaving thermal stability for hot & cold water supply including all CPVC\nplain & brass threaded fittings This includes jointing of pipes & fittings\nwith one step CPVC solvent cement ,trenching ,refilling & testing of\njoints complete as per direction of Engineer in Charge.\nExternal work 50 mm nominal outer dia Pipes | item216 | 59.7 | metre |
| 218 | 3.17 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,\nhaving thermal stability for hot & cold water supply including all CPVC\nplain & brass threaded fittings This includes jointing of pipes & fittings\nwith one step CPVC solvent cement ,trenching ,refilling & testing of\njoints complete as per direction of Engineer in Charge.\nExternal work 75 mm nominal outer dia Pipes | item217 | 27.8 | metre |
| 219 | 3.18 | Fixing water meter and stop cock in G.I. pipe line including cutting\nand threading the pipe and making long screws etc. complete (cost\nof water meter and stop cock to be paid separately | item218 | 2 | each |
| 220 | 3.19 | BRASS FITTINGS\nProviding and fixing brass bib cock of approved quality\n15 mm nominal bore | item219 | 32 | each |
| 221 | 3.2 | Providing and fixing brass stop cock of approved quality :\n15 mm nominal bore | item220 | 32 | each |
| 222 | 3.21 | Providing and fixing gun metal gate valve with C.I. wheel of approved\nquality (screwed end) :25 mm nominal bore | item221 | 25 | each |
| 223 | 3.22 | Providing and fixing gun metal gate valve with C.I. wheel of approved\nquality (screwed end) :32mm nominal bore | item222 | 10 | each |
| 224 | 3.23 | Providing and fixing gun metal gate valve with C.I. wheel of approved\nquality (screwed end) :80mm nominal bore | item223 | 4 | each |
| 225 | 3.24 | Providing and fixing ball valve (brass) of approved quality, High or low\npressure, with plastic floats complete\n15 mm nominal bore | item224 | 1 | each |
| 226 | 3.25 | Providing and fixing ball valve (brass) of approved quality, High or low\npressure, with plastic floats complete\n20 mm nominal bore | item225 | 1 | each |
| 227 | 3.26 | Providing and fixing ball valve (brass) of approved quality, High or low\npressure, with plastic floats complete\n25 mm nominal bore | item226 | 2 | each |
| 228 | 3.27 | Providing and fixing gun metal non- return valve of approved quality\n(screwed end) Vertica\n25 mm nominal bore | item227 | 2 | each |
| 229 | 3.28 | Providing and fixing gun metal non- return valve of approved quality\n(screwed end) Vertica\n32 mm nominal bore | item228 | 4 | each |
| 230 | 3.29 | Providing and fixing gun metal non- return valve of approved quality\n(screwed end) Vertica\n40 mm nominal bore | item229 | 4 | each |
| 231 | 3.3 | Providing and fixing gun metal non- return valve of approved quality\n(screwed end) Vertica\n50 mm nominal bore | item230 | 4 | each |
| 232 | 3.31 | Providing and fixing gun metal non- return valve of approved quality\n(screwed end) Vertica\n80 mm nominal bore | item231 | 1 | each |
| 233 | 3.32 | Providing and fixing uplasticised PVC connection pipe with brass\nunions :\n45 cm length\n15 mm nominal bore | item232 | 100 | each |
| 234 | 3.33 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :\n100 mm diameter | item233 | 1 | each |
| 235 | 3.34 | Constructing masonry Chamber 30x30x50 cm inside, in brick work\nin cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with\nC. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in\ncement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded\nstone aggregate 20 mm nominal size), i/c necessary excavation,\nfoundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded\nstone aggregate 40mm nominal size ) and inside plastering with\ncement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished\nwith a floating coat of neat cement complete as per standard design :\nWith common burnt clay F.P.S.(non modular) bricks of\nclass designation 7.5 | item234 | 1 | each |
| 236 | 3.35 | C.P. BRASS F ITTINGS\nProviding and fixing C.P. brass bib cock of approved quality conforming\nto IS:8931 :\n15 mm nominal bore | item235 | 25 | each |
| 237 | 3.36 | Providing and fixing C.P. brass long nose bib cock of approved quality\nconforming to IS standards and weighing not less than 810 gms\n15 mm nominal bore. | item236 | 25 | each |
| 238 | 3.37 | Providing and fixing C.P. brass angle valve for basin mixer and geyser\npoints of approved quality conforming to IS:8931 a) 15 mm nominal bor\n15mm nominal bore | item237 | 150 | each |
| 239 | 3.38 | Providing and fixing PTMT grating of approved quality and colour\nRectangular type with openable circular lid\n150 mm nominal size square 100 mm diameter of the\ninner hinged round grating | item238 | 150 | each |
| 240 | 3.39 | Providing, laying and jointing glazed stoneware pipes class SP-1 with\nstiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine\nsand) including testing of joints etc. complete :\n200 mm diameter | item239 | 15 | metre |
| 241 | 3.4 | Providing, laying and jointing glazed stoneware pipes class SP-1 with\nstiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine\nsand) including testing of joints etc. complete :\n250 mm diameter | item240 | 1 | metre |
| 242 | 3.41 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse\nsand : 10 graded stone aggregate 40 mm nominal size) all-round\nS.W. pipes including bed concrete as per standard design :\n100 mm diameter | item241 | 30 | metre |
| 243 | 3.42 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse\nsand : 10 graded stone aggregate 40 mm nominal size) all-round\nS.W. pipes including bed concrete as per standard design :\n150 mm diameter | item242 | 14.86 | metre |
| 244 | 3.43 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse\nsand : 10 graded stone aggregate 40 mm nominal size) all-round\nS.W. pipes including bed concrete as per standard design :\n200 mm diameter | item243 | 15 | metre |
| 245 | 3.44 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse\nsand : 10 graded stone aggregate 40 mm nominal size) up to\nhaunches of S.W. pipes including bed concrete as per standard\ndesign :\n100 mm diameter | item244 | 30 | metre |
| 246 | 3.45 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse\nsand : 10 graded stone aggregate 40 mm nominal size) up to\nhaunches of S.W. pipes including bed concrete as per standard\ndesign :\n150 mm diameter | item245 | 30 | metre |
| 247 | 3.46 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse\nsand : 10 graded stone aggregate 40 mm nominal size) up to\nhaunches of S.W. pipes including bed concrete as per standard\ndesign :\n200 mm diameter | item246 | 15 | metre |
| 248 | 3.47 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete\nwith C.I. grating brick masonry chamber with water tight C.I. cover\nwith frame of 300 x300 mm size (inside) the weight of cover to be not\nless than 4.50 kg and frame to be not less than 2.70 kg as per\nstandard design :\n150 x 100 mm size P type\nWith Sewer bricks conforming to IS : 4885 | item247 | 6 | each |
| 249 | 3.48 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes\nwith collars jointed with stiff mixture of cement mortar in the proportion\nof 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete\n100 mm dia. R.C.C. pipe | item248 | 30 | metre |
| 250 | 3.49 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes\nwith collars jointed with stiff mixture of cement mortar in the proportion\nof 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete\n150 mm dia. R.C.C. pipe | item249 | 30.3 | metre |
| 251 | 3.5 | Inside size 120x90 cm and 90 cm deep including C.I.\ncover with frame (medium duty) 500 mm internal\ndiameter, total weight of cover and frame to be not less\nthan 116 kg (weight of cover 58 kg and weight of frame\n58 kg) :\nWith Sewer bricks conforming to IS : 4885 | item250 | 5 | each |
| 252 | 3.51 | Providing M.S. foot rests including fixing in manholes with 20x20x10\ncm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded\nstone aggregate 20 mm nominal size) as per standard design\nWith 20x20 mm square bar | item251 | 25 | each |
| 253 | 3.52 | 455x610 mm rectangular C.I. cover (light duty) the weight\nof the cover to be not less than 23 kg | item252 | 25 | each |
| 254 | 3.53 | 500 mm diameter C.I. cover (medium duty) the weight of\nthe cover to be not less than 58 kg | item253 | 10 | each |
| 255 | 3.54 | 560 mm diameter C.I. cover (heavy duty) the weight of\nthe cover to be not less than 108 kg | item254 | 5 | each |
| 256 | 3.55 | Supplying and fixing C.I. cover 300x300 mm without frame for gully\ntrap (standard pattern) the weight of cover to be not less than 4.5 kg | item255 | 25 | each |
| 257 | 3.56 | Making connection of drain or sewer line with existing manhole\nincluding breaking into and making good the walls, floors with cement\nconcrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides\nwith cement mortar 1:3 (1 cement : 3 coarse sand), finished with a\nfloating coat of neat cement and making necessary channels for the\ndrain etc. complete :\nFor pipes 100 to 250 mm diameter | item256 | 1 | each |
| 258 | 3.57 | Constructing brick masonry road gully chamber 50x45x60 cm with\nbricks in cement mortar 1:4 (1 cement : 4 coarse sand) including\n500x450 mm pre-cast R.C.C. horizontal grating with frame complete\nas per standard design :\nWith common burnt clay F.P.S. (non modular) bricks of\nclass designation 7.5 | item257 | 10 | each |
| 259 | 3.58 | Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | item258 | 10 | each |
| 260 | 3.59 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | item259 | 1 | each |
| 261 | 3.6 | Providing & fixing of Instant Electrical Operated 5ltr. wall Mounted Hot water Gyser , with all Inlet Out let Connection with stop cock all accessories to complete the item. (spearhot or recold make.) | item260 | 2 | each |
| 262 | 3.61 | Providing & fixing of Open Wall Hot & Cold Mixture , with all accessories to complete the item. (Jaquat Cat - CON - With Control Cock Operation Plate.) | item261 | 2 | each |
| 263 | 3.62 | Supply, installation, testing and commissioning of Centralized R.O.. system consisting of R.O. membrance, PP cartridge filter, Activated Carbon filter, R.O. multistage booster pump , drain & back wash arrangement & inlet, outlet & overflow & R.O.Water Storage Tank connection etc. as per tech. specification . ( Ion Exchange, Power H2o, Tharmax Make)\nInput Water Hardness : as per water analysis\nOutput Water Quality : Potable water\nCapacity : 250 Liters./ hr. | item262 | 1 | System |
| 264 | 3.63 | Supply installation, testing and commissioning of dometic water treatment plant comprising of pressure sand filter, multi media, activated carbon filter,softener plant system, chlorination, etc. accrording to input water quality. The scope shall include interconnection piping, valves, Inler Feed Pump Piping,NRV, Valve Control Pannel electrical Internal cabeling wtc, instruments, back wash arrangement, etc. complete ( Ion Exchange, Power H2o, Tharmax Make)\nInput Water Hardness : as per water analysis\nOutput Water Quality : > 100ppm\nCapacity: 10,000 Liters./ hr. | item263 | 1 | System |
| 265 | 3.64 | Suppying, installing, testing and commissioing of centrifugal submersible monoset pumps with c.i. casing, Bronze impeller, SS Shaft and driven by 415 V AC, 3 phase, 50HZ., motor running at 2900 rpm speed and shall be supplied with all accessories viz., strainer, base plate, coupling, lift hook, chain, starter panel, cabling up to panel, earthing,and delevery pipes & valves etc., complete.\nDomestic Water Riser :-\nCapacity :10 cu. mtr./ hr. (1 w. + 1 s.)\nHead : 30 MTRS | item264 | 1 | System |
| 266 | 3.65 | Suppying, installing, testing and commissioing of centrifugal submersible monoset pumps with c.i. casing, Bronze impeller, SS Shaft and driven by 415 V AC, 3 phase, 50HZ., motor running at 2900 rpm speed and shall be supplied with all accessories viz., strainer, base plate, coupling, lift hook, chain, starter panel, cabling up to panel, earthing,and delevery pipes & valves etc., complete.\nFlushing Water Riser :-\nCapacity :10 cu. mtr./ hr. (1 w. + 1 s.)\nHead : 30 MTRS | item265 | 1 | System |
| 267 | 3.66 | Supplying, installing, testing and commissioning of centrifugal sump pumps for clear water suitable for 415 ±10% volt, 3 phase/230 ±10% volt single phase, 50 Hz AC power supply. Each pump shall be suitable for automatic/manual operation complete with control panel as required to complete the system for working condition capacity of the pump as under sump location in basement. The pump shall be mounted on top of sump & should be suitable for negative suction of 0.5 - 0.7 mtrs.\nDomestic Water Supply :-\nCapacity : 30 cu. mtr./ hr. (1w. + 1 s.)\nHead : 15 MTRS | item266 | 1 | System |
| 268 | 3.67 | Supply installation, testing, commissioning of Bore well submersible pump to be installed in the tube well of required indicated capacity and head as per relevant IS for Bore water lifting with suitable submersible vet type, water cooled, squirrel case motor conforming to IS 9283, working of 3-phase, 50Hz +/- 3% 415 VAT +/- 10%, AC supply 2900 RPM synchronous speed with 10mtr. copper conductor flat cable from pump to starter panel with cables and termination ( all supports clamps pipe fittings mechanical seal, bearing, bush, strainer, etc. comp., Casing C.I., S.S. CF8M impeller, bronze casing, wearing and bearing bush, TC mechanical seal, S.S. bearing, S.S. shaft with sleeve, S.S. strainer, and M.S. morter along with water guard, single phase preventor with all cables of appropriate size control and instrumentations, switches, testing, and installation along with testing. The scope shall also include delivery isolation valve & NRV with PVC piping ( Assume 100mtr depth) ( 10 MTR CU. PER DAY AVG. REQ. with potable water quality) | item267 | 1 | System |
| 269 | 3.68 | Providing waste water treatment plant for waste water treatment Packaged Plant on the Aerobic process, the treated effuent to be used for flusing / landscaping. The scope shall include treated waste water tank of @1,00,000 ltr. & all required civil, mechanical, electrical, instrumentation & control system etc. The scope shall also include bypass arrangement with required valves, valve chamber, etc. ( Ion Exchange, Tharmax, Sintex, Niak Enviro,Elctro process Make)Capacity : 75,000 cu. mtr./ day. | item268 | 1 | System |
| 270 | 3.69 | Supply, installation, testing & commissioning of localized S.S. Storage water Cooler system with all piping & fitting valves, Prefiltration Aquagurd, U.V. filter with necessary all Fittings, etc complete. (Power H2O, Voltas,Blue Star Make) 80LTR. STORAGE CAPACITY. | item269 | 2 | System |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
