Northern Coalfields Limited-NCL has published Renovation Of Existing Pavilion Into Gym And Other Allied Renovation Works At Stadium , Singrauli . . Submission Date for this Tender is 20-07-2020. Stadium Tenders in Singrauli Madhya Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: Renovation of existing pavilion into Gym and other allied renovation works at Stadium, Singrauli. | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||
2 | 2 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size). | 5.87 | cum | |
3 | 3 | Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : | |||
4 | 4 | Light shade pigment using white cement | 11.69 | sqm | |
5 | 5 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | |||
6 | 6 | In cement mortar | 6.52 | cum | |
7 | 7 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | 269.39 | sqm | |
8 | 8 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. | |||
9 | 9 | For thickness of tiles 10 mm to 25 mm | 291.68 | sqm | |
10 | 10 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. | |||
11 | 11 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 303.48 | kg | |
12 | 12 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | 367.92 | kg | |
13 | 13 | Centering and shuttering including strutting, propping etc. and removal of form for:\r\n | |||
14 | 14 | Suspended floors, roofs, landings, balconies and access platform | 34.81 | sqm | |
15 | 15 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | 3.89 | sqm | |
16 | 16 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). | 4.45 | cum | |
17 | 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. | |||
18 | 18 | Cold twisted bars | 400.5 | Kg | |
19 | 19 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | |||
20 | 20 | Hot finished welded type tubes | 804.6 | kg | |
21 | 21 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. | |||
22 | 22 | Granite of any colour and shade | |||
23 | 23 | Area of slab over 0.50 sqm | 288.17 | sqm | |
24 | 24 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. | |||
25 | 25 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 69.3 | kg | |
26 | 26 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. | |||
27 | 27 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 13.86 | sqm | |
28 | 28 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : | |||
29 | 29 | 125 mm | 16 | each | |
30 | 30 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : | |||
31 | 31 | 250x10 mm | 16 | each | |
32 | 32 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : | |||
33 | 33 | 300x16 mm | 8 | each | |
34 | 34 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | 4 | each | |
35 | 35 | 6 mm cement plaster of mix : | |||
36 | 36 | 1:3 (1 cement : 3 fine sand) | 32.08 | sqm | |
37 | 37 | 12 mm cement plaster of mix : | |||
38 | 38 | 1:6 (1 cement: 6 fine sand) | 232.5 | sqm | |
39 | 39 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. | |||
40 | 40 | Size of Tile 600x600 mm | 62.84 | sqm | |
41 | 41 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. | |||
42 | 42 | Size of Tile 600x600 mm | 92.04 | sqm | |
43 | 43 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : | |||
44 | 44 | W.C. pan with ISI marked black solid plastic seat and lid | 4 | each | |
45 | 45 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: | |||
46 | 46 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | 4 | each | |
47 | 47 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : | |||
48 | 48 | Single half stall urinal with 5 litre P.V.C. automatic flushing cistern | 2 | each | |
49 | 49 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : | |||
50 | 50 | Single squatting plate with 5 litre P.V.C. automatic flushing cistern | 2 | each | |
51 | 51 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | 4 | each | |
52 | 52 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 4 | each | |
53 | 53 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. | |||
54 | 54 | 15 mm nominal bore | 4 | each | |
55 | 55 | Providing and fixing soil, waste and vent pipes : | |||
56 | 56 | 100 mm dia | |||
57 | 57 | Sand cast iron S&S pipe as per IS: 1729 | 36 | metre | |
58 | 58 | Providing and fixing 100 mm sand cast Iron grating for gully trap. | 8 | each | |
59 | 59 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. | |||
60 | 60 | 100x100x100 mm | |||
61 | 61 | Sand cast iron S&S as per IS - 1729 | 4 | each | |
62 | 62 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. | |||
63 | 63 | 100 mm dia | |||
64 | 64 | Sand cast iron S&S as per IS - 1729 | 4 | each | |
65 | 65 | Providing and fixing terminal guard : | |||
66 | 66 | 100 mm | |||
67 | 67 | Sand cast iron S&S as per IS - 1729 | 4 | each | |
68 | 68 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : | |||
69 | 69 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : | |||
70 | 70 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 4 | each | |
71 | 71 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : | |||
72 | 72 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | 2 | each | |
73 | 73 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : | |||
74 | 74 | For 100 mm dia pipe | 20 | each | |
75 | 75 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. | |||
76 | 76 | 110 mm diameter | 7 | metre | |
77 | 77 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. | |||
78 | 78 | 110 mm | 8 | each | |
79 | 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK | |||
80 | 80 | 50 mm nominal outer dia Pipes | 6 | metre | |
81 | 81 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL | |||
82 | 82 | 25 mm dia nominal bore | 44 | metre | |
83 | 83 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : | |||
84 | 84 | 15 mm dia nominal bore | 24 | metre | |
85 | 85 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : | |||
86 | 86 | 25 mm nominal bore | 4 | each | |
87 | 87 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 | |||
88 | 88 | 15mm nominal bore | 12 | each | |
89 | 89 | Providing and fixing uplasticised PVC connection pipe with brass unions : | |||
90 | 90 | 45 cm length | |||
91 | 91 | 15 mm nominal bore | 12 | each | |
92 | 92 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 589.28 | sqm | |
93 | 93 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | 658.78 | sqm | |
94 | 94 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. | |||
95 | 95 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre | 658.78 | sqm | |
96 | 96 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. | |||
97 | 97 | Two coats | 658.78 | Sqm | |
98 | 98 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | |||
99 | 99 | Two or more coats on new work | 49.16 | sqm | |
100 | 100 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | |||
101 | 101 | Circular tank | 2000 | per litre | |
102 | 102 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. | |||
103 | 103 | 25mm nominal bore, weighing not less than 62 gms | 8 | each | |
104 | 104 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | |||
105 | 105 | For fixed portion | |||
106 | 106 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 864.6 | kg | |
107 | 107 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): | |||
108 | 108 | With float glass panes of 5.50 mm thickness | 73.01 | sqm | |
109 | 109 | Finishing walls with textured exterior paint of required shade : | |||
110 | 110 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm | 180.54 | sqm | |
111 | 111 | Providing and fixing towel ring round.Jaguar make or equivalent(AQN-7721). | 4 | each | |
112 | 112 | Carriage of material by Mechanical Transport including loading, unloading and stacking | |||
113 | 113 | Lime, moorum, building rubbish Lead - 1 Km | 17.05 | cum | |
114 | 114 | Total impact of GST for the purpose of CTC | BI01010001010000000000000515BI0100001129 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail