Yearly ( F . Y . 2020-21 ) Rate Contract For Construction Of Tube Well/ Panghat In Panchaayt Samiti Badgaon , Udaipur . ( Rates Based On Phed 2012 Circle Udaipur )
Tender Value
35 Lakhs
Estimated cost
Bid Submission
20 Jul 2020
0 days left
EMD
70000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Badgaon → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Yearly ( F . Y . 2020-21 ) Rate Contract For Construction Of Tube Well / Panghat In Panchaayt Samiti Badgaon , Udaipur . ( Rates Based On Phed 2012 Circle Udaipur )
BOQ
| Name of Work: Yearly (F.Y. 2020-21) rate contract for construction of TUBE Well/ panghat in panchaayt samiti BADGAON , udaipur. (Rates based on PHED 2012 Circle udaipur) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Construction of above bore well by DTH drilling up to 60 meter depth and above in all types of rocks for tapping water aquifer in hard formation (non collapsible) and to drill all types of over burden (including collapsible strata) to accommodate casing pipe of size 125mm dia for encasing over furden to eliminate the rist of \"caving in\" including insertion of casing pipe 0.5 to 1.0 meter deep in hard rock beyond over burden as specified in \"code of practice of construction and testing of tube well (IS:2800 (Part I) :1991 and IS:2800 (Part II):1979 both amended up to date). The work will not include cost of casing pipe and shall be deemed completed only after obtained sand free water during pumping, The bore well should have a through out bore size of 115/105mm beyond casing pipe. | BI01010001010000000000000515BI0100001114 | 1 | Per. Mtr |
| 2 | 2 | Construction of borehole by DTH Rig up to 100 meter depth and above in all types of rocks for tapping water aquifer in hard formation ( non collapsible) to accommodate casing pipe of OD 168.3 mm for encasing pipes 0.5 to 1.0 meter deep in hard rock beyond overburden as specified in code of practice, construction and testing of tube wells (IS: 2800 Part 1): 1991 and (IS: 2800 Part II): 1979 (both amended up to date) the work will not include cost of casing pipe and shall be deemed completed only after obtaining sand free water during pumping. The bore well should have a throughout bore size of 150mm beyond casing pipe for 150 mm dia, nominal bore complete in all respect. | BI01010001010000000000000515BI0100001115 | 1 | Per. Mtr |
| 3 | 3 | Construction of borehole by DTH Rig up to 100 meter depth and above in all types of rocks for tapping water aquifer in hard formation ( non collapsible) to accommodate casing pipe of OD 219.1 mm for encasing pipes 0.5 to 1.0 meter deep in hard rock beyond overburden as specified in code of practice, construction and testing of tube wells (IS: 2800 Part 1): 1991 and (IS: 2800 Part II): 1979 (both amended up to date) the work will not include cost of casing pipe and shall be deemed completed only after obtaining sand free water during pumping. The bore well should have a throughout bore size of 200mm to 180mm beyond casing pipe for 200 mm dia, nominal bore complete in all respect. | BI01010001010000000000000515BI0100001116 | 1 | Per. Mtr |
| 4 | 4 | Providing and incasing of ERW M.S. Black casing pipe of 150 mm dia nominal bore ISI marked (IS: 4270 /2001) of 5.0 mm thickness and weight 20.1 kg/ meter at site of work for drilling of tube well. | BI01010001010000000000000515BI0100001117 | 1 | Per. Mtr |
| 5 | 5 | Providing and incasing of ERW M.S. Black casing pipe of 200 mm dia nominal bore ISI marked (IS: 4270 /2001) of 5.4 mm thickness and weight 28.4 kg/ meter at site of work for drilling of tube well. | BI01010001010000000000000515BI0100001118 | 1 | Per. Mtr |
| 6 | 6 | Installation of submersible motor pump set in TWs complete (labour charges only) including transportation of tripod. Chain pulley block and any other material required for lowering purpose (payable once for one TW) | BI01010001010000000000000515BI0100001119 | 1 | No. |
| 7 | 7 | S&F MS Clamps set of 50 mm wide,12mm thick from flat iron and for the length of 600 mm with nuts and bolts etc.having groove of 50 mm etc. for holding the riser pipe assembly of dia 50 mm for submersible pump set. | BI01010001010000000000000515BI0100001120 | 1 | Sets |
| 8 | 8 | Providing and laying of PVC insulated Submersible cable with copper conductor of superior quality including making connection etc. make as mentioned in specification (Make- CCI/ Gloster, Nicco, Finolex, Unitop, BCH and other make as acceptable in PHED Rajasthan) cable size and nos. as per out coming cable for motor: | BI01010001010000000000000515BI0100001121 | ||
| 9 | 8.01 | 2.50 Sqmm 3 core | BI01010001010000000000000515BI0100001122 | 1 | R.Mtr |
| 10 | 8.02 | 4.00 Sqmm 3 core | BI01010001010000000000000515BI0100001123 | 1 | R.Mtr |
| 11 | 9 | Providing and Lowering of GI Assembly Pipes Class- B (IS: 1239) for various sizes including flange tightening, welding with MS Patti, hole making and cable grove making as per required length of 3.00 M/ 6.00 M (Pipe and flange shall be arranged by the Contractor also). Length of MS strip will be 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at junction of flange This includes providing of GI pipes and Lowering of pipes with rubber washer and MS nut Bolts of required size complete in all respect including all material. | BI01010001010000000000000515BI0100001124 | ||
| 12 | 9.01 | 50mm dia Class \"B\" (Medium Duty) | BI01010001010000000000000515BI0100001125 | 1 | Per. Mtr |
| 13 | 9.02 | 65mm dia Class \"B\" (Medium Duty) | BI01010001010000000000000515BI0100001126 | 1 | Per. Mtr |
| 14 | 9.03 | 80mm dia Class \"B\" (Medium Duty) | BI01010001010000000000000515BI0100001127 | 1 | Per. Mtr |
| 15 | 10 | S&F Tube well cover of M.S. Sheet (3.0mm thick) with nut & bolts complete for casing size | BI01010001010000000000000515BI0100001128 | ||
| 16 | 10.01 | 200 mm | BI01010001010000000000000515BI0100001129 | 1 | Each |
| 17 | 10.02 | 150 mm | BI01010001010000000000000515BI0100001130 | 1 | Each |
| 18 | 11 | Providing of Submersible motor pump sets ISI marked (IS: 8034- 1989) of approved make for T.W./ D.C.B./ Open well (Group- 1) Make- Kirloskar/ KSB/ Texmo/ Calama suitable for 200/ 150 mm dia. Bore hole for Discharge range 150 to 750 LMP and Head 90 to 160 mtr. With two (2) years guarantee period (if motor pump will be out of order within in guarantee period, the contractor is bound to replace this pump set of same duty condition, no payment will be made for replaced pump set). | BI01010001010000000000000515BI0100001131 | ||
| 19 | 11.01 | For 142mm nominal OD | BI01010001010000000000000515BI0100001132 | 1 | PKW |
| 20 | 11.02 | For 192mm nominal OD | BI01010001010000000000000515BI0100001133 | 1 | PKW |
| 21 | 12 | Providing and installation of electric feeder panel board for submersible pump sets (automatic star delta starter) as per scope of work drawing specifications including mounting on M15 (1:2:4) platform of size 1000mmx600mm as per detailed specifications including single phase preventer. (BHC/ L&T Make only) | BI01010001010000000000000515BI0100001134 | ||
| 22 | 12.01 | Above 5.00 HP & up to 7.50 HP | BI01010001010000000000000515BI0100001135 | 1 | No. |
| 23 | 12.02 | Above 7.50 HP & up to 10.00 HP | BI01010001010000000000000515BI0100001136 | 1 | No. |
| 24 | 13 | Providing and Installation of Single Phase V- 4, five star energy efficient submersible pumping motor pump set made of stainless steel body, IS: 8034- 1989 comprising of submersible motor as per IS: 9583- 1995 approved make KSB/ Crompton Greaves/ Kirlosker/ Texmo/ Pluga/ Shakti/ Calama/ Ujala etc. as acceptable in the department or equivalent only, making connection suitable for Tube Well. The job includes screwing lowering of riser pipes with rope, installation of complete fitting and accessories with riser pipes, jointing of electrical cables & other connection making switch board electrical connection all labour for testing of submersible pump set, complete in all respect but excluding cost of pipe, cable and rope etc for duty condition: | BI01010001010000000000000515BI0100001137 | ||
| 25 | 13.01 | (a) Discharge- 25 LPM and Head- 90 m. | BI01010001010000000000000515BI0100001138 | 1 | Each Pump Set |
| 26 | 13.02 | (a) Discharge- 25 LPM and Head- 130 m. | BI01010001010000000000000515BI0100001139 | 1 | Each Pump Set |
| 27 | 14 | Providing and laying of PVC insulated and PVC sheathed cables of 1.1 KV grade with aluminum conductor of IS: 1554 category- II and approved make of including excavation of 30 cmx 75 cm side trench as per IS: 1255- 15 cm thick layer of sand and II class brick covering, refilling earth in remaing portion making necessary connection including testing etc. of required size and core (category- I) make as mentioned in specification (Make- CCI/ Gloster, Nicco, Finolex, Unitop, BCH and other make as acceptable in PHED Rajasthan): | BI01010001010000000000000515BI0100001140 | ||
| 28 | 14.01 | 6.0 sqmm- 2 core | BI01010001010000000000000515BI0100001141 | 1 | RM |
| 29 | 14.02 | 10.0 sqmm- 2 core | BI01010001010000000000000515BI0100001142 | 1 | RM |
| 30 | 15 | Providing and installation of Electric Feeder Panel, DOL Starter with Ammeter, Volt Meter, Starting Capacitor, Running Capacitor, On and Off Switches, MCB with box and connection strip etc. duly wired and fitted on 6.0 mm Bakelite sheet and enclosed in canopy type enclosed fabricated from 18 SWG CRCA sheet providing sufficient space for fixing electric meter duly power coated fitted with angle iron stand complete (Make- L&T, Siemens, ABB, BCH and other make as acceptable in PHED Rajasthan. | BI01010001010000000000000515BI0100001143 | 1 | Each |
| 31 | 16 | Providing and fixing MS Box size 750x500x300 mm made out of MS Sheet 18 SWG on angle iron frame of 40x40x4 mm and shall be fixed/ welded with above MS staging at bracing level. The box shall be piece moulded made of MS sheet having 2 doors out of which one should have a window with acrylic sheet for taking reading of the meter without opening the box. The box shall be shock proof, weather proof and should have locking arrangement and shall be painted. | BI01010001010000000000000515BI0100001144 | 1 | Each |
| 32 | 17 | Providing and lowering of HDPE pipe confirming to IS: 4984- 1995 in PE- 63 grade and class- PN 6 as per recommendation of manufacturer for particular duty condition of pumping set including ISI marked necessary GI fitting & PVC rope confirming IS: 5175- 1992, along with clamping of submersible cable (ISI Marked) of appropriate size, so that top of pumping set is minimum 25 m below water level for size nominal sizes | BI01010001010000000000000515BI0100001145 | ||
| 33 | 17.01 | (a) 25 mm` | BI01010001010000000000000515BI0100001146 | 1 | RM |
| 34 | 17.02 | (B) 32 mm | BI01010001010000000000000515BI0100001147 | 1 | RM |
| 35 | 18 | The MS staging fabricated out of MS angle iron struts of 65x65x5 mm thick size. The height of staging shall be 2.40 m above ground level, and the legs shall be embedded at least 60 cm in ground, in cement concrete block (CC- 1: 2: 4) 45x45x70 cms. The total four nos. struts shall be provided, which shall be braced at three places viz at ground. The bracing shall be MS angle iron 45x45x5 cm. The bracing shall be of MS angle iron 45x45x5 cm. A grid mesh of MS angle iron 45x45x5 cm with center to center distant of maximum 440 cm shall be provided at the top of staging for placing the Moulded PE tank of 1000 liter capacity. This includes, over the grid a MS sheet of 3 mm thickness shall be placed. The struts shall further be extended up to 50 cm above staging and a suitable circular frame of MS flat 50x5 mm shall be provided at this level to hold the Moulded tank firmly against over turning/ sliding. | BI01010001010000000000000515BI0100001148 | 1 | Each Job |
| 36 | 19 | Providing and fixing Moulded Poly Ethylene (PE) storage tank, IS: 1270 marked indicating the BIS license No. of approved make with cover, 25 mm dia 1.0 m long GI over flow pipe and 25 cm long wash out pipe with plug & socket, including making connection etc. complete of approved design, 1000 liters capacity. | BI01010001010000000000000515BI0100001149 | 1 | Each |
| 37 | 20 | Construction of open surface drain with 112 mm thick brick masonry in Cement Mortar 1: 4, 110 thick base concrete 1: 5: 10, 37 mm thick M- 15 grade CC flooring, 12 mm 1: 4 cement plaster on all exposed faces of walls including top surface excavation & disposal of earth complete as per approved design/ drawing 150 mm drain, 225 mm average depth. | BI01010001010000000000000515BI0100001150 | 1 | Each |
| 38 | 21 | Providing and fixing of GI pipes of suitable size including GI fitting and 2 nos. self closing taps with 200 mm thick brick wall in cement mortar 1: 4 to support taps including construction of masonry Platform near Panghat with suitable arrangement for placing bucket or pot and drainage size 0.6 x1.50 m with suitable foundation and 150 mm thick CC 1: 2: 4 flooring | BI01010001010000000000000515BI0100001151 | 1 | Complete Job |
| 39 | 22 | Providing, fabrication and installation of Sign Board on which detailed of work should be written with paint as directed by the engineer, made of MS Plate 3 mm thick, 1.30/ 1.50 meters long x 0.75 meters wide fixed on angle iron frame on top of Panghat fixed with nut bolts etc. and submission 5 nos. coloured photograph of the Panghat in A-4 size after commissioning of the Panghat complete in all respect and as direction by the Engineer- In- Charge. | BI01010001010000000000000515BI0100001152 | 1 | Each Job |
AI Tender Summary
Tender Timeline
Jul 08, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 21, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender