Establishment And Modernization Of Haat Bazaar And Establishing The Storage Facilities Under Sr-54 Sandal Reserve In Marayoor Range During 2020-21
Tender Value
14 Lakhs
Estimated cost
Bid Submission
14 Jul 2020
0 days left
EMD
35000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Marayoor → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Establishment And Modernization Of Haat Bazaar And Establishing The Storage Facilities Under Sr-54 Sandal Reserve In Marayoor Range During 2020-21
BOQ
| Name of Work: Establishment and modernization of Haat Bazaar and establishing the storage facilities under SR-54 Sandal Reserve in Marayoor Range during 2020-21 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up\nto 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50\nm outside the periphery of the area cleared | BI01010001010000000000000515BI0100001113 | 216 | sqm |
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas\n(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated\nearth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of\nsoil | BI01010001010000000000000515BI0100001114 | 243.375 | cum |
| 3 | 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not\nexceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m\nand lift up to 1.5 m. | BI01010001010000000000000515BI0100001115 | 75 | cum |
| 4 | 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and\nshuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40\nnominal size) | BI01010001010000000000000515BI0100001116 | 4.626 | cum |
| 5 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and\nshuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm\nnominal size) | BI01010001010000000000000515BI0100001117 | 5.683 | cum |
| 6 | 6 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of\ncolumns, etc for mass concrete | BI01010001010000000000000515BI0100001118 | 19.05 | sqm |
| 7 | 7 | Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC\nblocks in super structure above plinth level up to floor Vlevel with RCC band at sill level and lintel level\nwith approved block laying polymermodified adhesive mortar all complete as per direction of Engineer-in-\nCharge. (Thepayment of RCC band and reinforcement shall be made for seperately). | BI01010001010000000000000515BI0100001119 | 45.666 | cum |
| 8 | 8 | 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001120 | 313.86 | sqm |
| 9 | 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up\nstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :\n733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the\ngaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.\nAluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever\nrequired including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel\nscrews, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,\npaneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium\n(minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001121 | 30 | Kg |
| 10 | 10 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making\nprovision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket\nrequired (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder\ncoating 50 micron) | BI01010001010000000000000515BI0100001122 | 15 | Kg |
| 11 | 11 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM\nrubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer -\nin -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0\nmm thickness | BI01010001010000000000000515BI0100001123 | 10 | sqm |
| 12 | 12 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed\nand fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or\ndash fastener shall be paid for separately), using good quality Anjili wood /jack wood | BI01010001010000000000000515BI0100001124 | 0.2 | cum |
| 13 | 13 | Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows,\n30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with\nnecessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f\nEngineer in- charge. using Anjili/ Jack wood | BI01010001010000000000000515BI0100001125 | 2.1 | sqm |
| 14 | 14 | Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles\nand rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt\nedging on both sides. The styles and rails mitred and joint at the corners by means of M.S.\ngalvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.\nThe styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1\nmm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2\nmm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats.\nThe shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having\nover all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at\ntwo places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers,\ncomplete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and\nbathroom door shutter). | BI01010001010000000000000515BI0100001126 | 6.721 | sqm |
| 15 | 15 | Providing and fixing 10 Gauge welded mesh grill ( 50 x 50 ) with angle iron ( 30 x 30 ) 4 mm thick\nincluding all labour and hire charges for fabricating and cost of materials. Date for 3m x 3m ( Rate\ncalculated as per kerala PWD schedule of rates 2012 ) | BI01010001010000000000000515BI0100001127 | 100 | per sqm |
| 16 | 16 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including\ncutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding\nand bolted with special shaped washers etc. complete.Hot finished welded type tubes | BI01010001010000000000000515BI0100001128 | 565 | Kg |
| 17 | 17 | Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L\nhooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers\nfilled with white lead, including a coat of approved steel primer and two coats of approved paint on\noverlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the\ncost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.80 mm\nthick with zinc coating less than 275 gm/m2 | BI01010001010000000000000515BI0100001129 | 204 | sqm |
| 18 | 18 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the\nmanufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,\nGrey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including\npointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001130 | 14.44 | sqm |
| 19 | 19 | Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be\nspecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,\nblack of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm\nthick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg\nper sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001131 | 54.631 | sqm |
| 20 | 20 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or\nmore coats on new work | BI01010001010000000000000515BI0100001132 | 112.5 | sqm |
| 21 | 21 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied\n@ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | BI01010001010000000000000515BI0100001133 | 260 | sqm |
| 22 | 22 | Sanitary fittings and Plumbing work | BI01010001010000000000000515BI0100001134 | 1 | LS |
| 23 | 23 | Electrification | BI01010001010000000000000515BI0100001135 | 1 | LS |
| 24 | 24 | Provision for GST payments (in 12 %) | BI01010001010000000000000515BI0100001136 | 1 | LS |
AI Tender Summary
Tender Timeline
Jul 07, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 16, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender