Internal Electrification Of Central Library Block Of Government Medical College At Anantnag ., Anantnag-Jammu And Kashmir

TDR : 24815258

Tender Notice
BOQ

Expired

Anantnag , Jammu And Kashmir

Tender Brief : Internal Electrification Of Central Library Block Of Government Medical College At Anantnag .

Document Fees
₹ 1000 /-

EMD
₹ 137600.0 /-

Tender Value
₹ 68.80 Lakhs /-

Submission Date
14-07-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Internal Electrification of Central Library Block of Government Medical College at Anantnag. Estimated Cost Rs. 68.80 Lacs
1	1	POWER DISTRIBUTION BOARDS
2	2	(415V AC, 3 phase, 4 wire, 50 Hz)
3	3	Supply,erection, testing & commissioning of PDB. This will be floor mounted, free standing, indoor duty, dust & vermin proof, front operated, having front hinged lockable doors, and will be complete with the main and auxiliaries bus bars, interconnection, earth terminals, earth bus and will be powder coated finished with 70 micron. The PDB panel shall use all for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panels will be made as per detailed specifications and drawings forming part of this document. The incoming and outgoing for PDB shall be as follows:
4	4	(Each MCCB will be variable current setting for over current and short circuit, front extended lockable handle, pad lockable in off position, indication light for ON, shrouding on incomer side, termination shall be suitable for aluminium bus bars.)
5	5	Bus bar shall be of Aluminium and continuous throughout the width of the panel and vertical cross section of bus bar shall be equal to the total ratings of feeders fed by the vertical bus bars subjected to minimum size being used as per fault level. Bus bar shall have minimum conductivity of 58%. All MCCB's shall have indication light for ON, shrouding on incomer side, phase barriers, rotary extended handle.
6	6	L&P PDB FOR CENTRAL LIBRARY BLOCK (LOCATION : CENTRAL LIBRARY BLOCK G/F) (Ics=10KA) (Ics = Icu = 100%)
7	7	1 No. Incomer 250Amps 4P MCCB with earth fault releases, 3 Nos. phase indicating lamps to show the incoming power with control MCB, 1 no. ON/OFF indication, 1 no. digital voltmeter with voltage selector switch, one no. digital multifunction meter with RS 485 port with matching cast resin CT's (EM 6436 or equivalent, Parameters/Model no. shall be as specified in specification).
8	8	One set of TPN, Al. bus bar rated 250 Amps (after considering necessary deratings of 75%) for phases and neutral for half capacity of phases.
9	9	The outgoing feeders are as follows :
10	10	7 Nos. 125 Amps TPN feeder each having one number 125 Amps TP MCCB with isolable neutral and ON indication.
11	11	4 Nos. 63 Amps TPN feeder each having one number 63 Amps TP MCCB with isolable neutral and ON indication.
12	12	1 No. Type II SPD 4 Mode Din mounted for nominal current 50kA per pole (8/20 micro-second) with HRC Fuses as per specification to meet 440V TOV withstand for 2 hrs. Voltage protection (VP) level will be less than 1.5kV.
13	13	1 set of complete wiring	1	No.
14	14	INTERNAL WIRING
15	15	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Quote without the cost of PVC conduit as conduit is already laid)
16	15.1	Group A	5	Point
17	15.2	Group B	5	Point
18	15.3	Group C	321	Point
19	16	Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.(Quote without the cost of PVC conduit as conduit is already laid)	7000	Mtrs
20	17	Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.	100	Mtrs
21	18	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
22	18.01	2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire	50	Mtrs
23	18.02	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire	3500	Mtrs
24	18.03	2 X 6 sq. mm + 1 X 6 sq. mm earth wire	450	Mtrs
25	18.04	4 X 4 sq. mm + 2 X 4 sq. mm earth wire	50	Mtrs
26	18.05	4 X 6 sq. mm + 2 X 6 sq. mm earth wire	50	Mtrs
27	18.06	4 X 10 sq. mm + 2 X 6 sq. mm earth wire	800	Mtrs
28	19	Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
29	19.1	20 mm	10	Mtrs
30	19.2	25 mm	1000	Mtrs
31	19.3	32 mm	10	Mtrs
32	19.4	40 mm	10	Mtrs
33	20	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
34	20.1	20 mm	10	Mtrs
35	20.2	25 mm	1500	Mtrs
36	20.3	32 mm	10	Mtrs
37	20.4	40 mm	10	Mtrs
38	21	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
39	21.1	5/6 amps switch	146	Each
40	21.2	2 way 5/6 amps switch	16	Each
41	21.3	15/16 amp switch	125	Each
42	21.4	3 pin 5/6 amp socket outlet	244	Each
43	21.5	6 pin 15/16 amp socket outlet	125	Each
44	22	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.	72	Each
45	23	Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.	20	Each
46	24	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
47	24.1	1 or 2 Module (75 mmX75 mm)	5	Each
48	24.2	3 Module (100mm X 75mm)	174	Each
49	24.3	4 Module (125mm X 75mm)	5	Each
50	24.4	6 Module (200mm X 75mm)	100	Each
51	24.5	8 Module (125mm X 125mm)	5	Each
52	25	Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
53	25.1	1 or 2 Module	5	Each
54	25.2	3 Module	174	Each
55	25.3	4 Module	5	Each
56	25.4	6 Module	100	Each
57	25.5	8 Module	5	Each
58	26	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.	10	Each
59	27	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.	10	Each
60	28	Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.	1	Each
61	29	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.	55	Each
62	30	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.	17	Each
63	31	Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.	651	Each
64	32	Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
65	32.1	Upto 450 mm sweep	5	Each
66	32.2	Supplying of 1200mm dia ceiling fan.	72	Each
67	32.3	Supplying of 300mm dia exhaust fan.	5	Each
68	33	Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
69	33.1	Group A	5	Point
70	33.2	Group B	5	Point
71	33.3	Group C	320	Point
72	34	SUB TOTAL OF INTERNAL WIRING
73	35	MCB & DB'S
74	36	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
75	36.1	8 way Double door	1	Each
76	36.2	12 way Double door	4	Each
77	37	Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper bus bar,neutral link, earth bar, din bar, detachable gland plate interconnections, powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator)
78	37.1	8 way (4 + 24), Double door	8	Each
79	37.2	12 way (4 + 36), Double door	9	Each
80	38	Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
81	38.1	8 way (4 + 24), Double door	2	Each
82	38.2	12 way (4 + 36), Double door	4	Each
83	39	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
84	39.1	Single pole	590	Each
85	39.2	Single pole and neutral	20	Each
86	39.3	Double pole	20	Each
87	39.4	Triple pole	20	Each
88	39.5	Triple pole and neutral	20	Each
89	40	Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.	108	Each
90	41	Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
91	41.1	40 amps	62	Each
92	41.2	63 amps	5	Each
93	42	Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
94	42.1	40 amps	5	Each
95	42.2	63 amps	5	Each
96	43	Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.	8	Each
97	44	Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.	8	Each
98	45	Supplying and fixing following rating,4pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps	20	Each
99	46	Supplying and fixing following rating,2pole, 240 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps	62	Each
100	47	Supplying and fixing following rating,three pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.
101	47.1	40 amps	18	Each
102	47.2	63 amps	36	Each
103	48	Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
104	48.1	100 Amp, 16 KA,TPMCCB	3	Each
105	48.2	125 Amp, 16 KA,TPMCCB	3	Each
106	49	SUB TOTAL OF MCB & DB'S
107	50	CABLE TRAYS
108	51	Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.
109	51.1	150 mm width X 50 mm depth X 1.6 mm thickness	155	Mtrs
110	51.2	300 mm width X 50 mm depth X 1.6 mm thickness	40	Mtrs
111	51.3	450 mm width X 50 mm depth X 2.0 mm thickness	20	Mtrs
112	51.4	600 mm width X 50 mm depth X 2.0 mm thickness	5	Mtrs
113	52	Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.
114	52.1	150 mm width X 50 mm depth X 1.6 mm thickness	20	Each
115	52.2	300 mm width X 50 mm depth X 1.6 mm thickness	6	Each
116	52.3	450 mm width X 50 mm depth X 2.0 mm thickness	2	Each
117	52.4	600 mm width X 50 mm depth X 2.0 mm thickness	1	Each
118	53	Supplying and installing following size of perforated painted with powder coating M.S. cable trays Tee with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.
119	53.1	150 mm width X 50 mm depth X 1.6 mm thickness	1	Each
120	53.2	300 mm width X 50 mm depth X 1.6 mm thickness	1	Each
121	53.3	450 mm width X 50 mm depth X 2.0 mm thickness	1	Each
122	53.4	600 mm width X 50 mm depth X 2.0 mm thickness	1	Each
123	54	Supplying and installing following size of perforated painted with powder coating M.S. cable trays Cross Member with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.
124	54.1	150 mm width X 50 mm depth X 1.6 mm thickness	2	Each
125	54.2	300 mm width X 50 mm depth X 1.6 mm thickness	2	Each
126	54.3	450 mm width X 50 mm depth X 2.0 mm thickness	1	Each
127	54.4	600 mm width X 50 mm depth X 2.0 mm thickness	1	Each
128	55	SUB TOTAL OF CABLE TRAYS
129	56	EARTHING
130	57	Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required.	6	Each
131	58	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.	4	Each
132	59	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.	4	Each
133	60	Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection / termination with GI thimble etc. as required.	200	Mtrs
134	61	Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection / terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm)	40	Mtrs
135	62	Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)	100	Mtrs
136	63	Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.	20	Mtrs
137	64	Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.	50	Mtrs
138	65	Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.	40	Mtrs
139	66	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.	110	Mtrs
140	67	SUB TOTAL OF EARTHING
141	68	LIGHTNING CONDUCTOR
142	69	Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.	6	Each
143	70	Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required.	6	Each
144	71	Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting / sweating and soldering etc. as required.	6	Each
145	72	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For horizontal run)	220	Mtrs
146	73	Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)	180	Mtrs
147	74	Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For horizontal run)	5	Mtrs
148	75	Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)	5	Mtrs
149	76	Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.	6	Mtrs
150	77	Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.	170	Mtrs
151	78	Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.	5	Mtrs
152	79	SUB TOTAL OF LIGHTNING CONDUCTOR
153	80	MV CABLE LAYING
154	81	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required.
155	81.1	Upto 35 sq. mm (clamped with 1mm thick saddle)	10	Mtrs
156	81.2	Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)	10	Mtrs
157	81.3	Above 95 sq. mm and upto 185 sq. mm (clamped with 25 / 40x3mm MS flat clamp)	10	Mtrs
158	81.4	Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)	10	Mtrs
159	82	Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required.
160	82.1	Upto 35 sq. mm (clamped with 1mm thick saddle)	2740	Mtrs
161	82.2	Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)	110	Mtrs
162	82.3	Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)	10	Mtrs
163	82.4	Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)	10	Mtrs
164	83	SUB TOTAL OF MV CABLE LAYING
165	84	MV CABLE JOINTING & END TERMINATION
166	85	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
167	85.01	3 X 10 sq. mm (22mm)	2	Each
168	85.02	3½ X 35 sq. mm (32mm)	6	Each
169	85.03	3½ X 50 sq. mm (35 mm)	6	Each
170	85.04	3.5 X 70 sq. mm (38mm)	2	Each
171	85.05	3.5 X 185 sq. mm (57mm)	2	Each
172	85.06	4 X 10 sq. mm (25mm)	18	Each
173	85.07	4 X 16 sq. mm (28mm)	4	Each
174	85.08	4 X 25 sq. mm (28mm)	6	Each
175	85.09	4 X 35 sq. mm (32mm)	2	Each
176	85.1	4 X 2.5 sq. mm	2	Each
177	86	SUB TOTAL OF MV CABLE LAYING
178	87	CABLE SUPPLY
179	88	Supply of multi core, stranded / solid aluminum conductor, XLPE / PVC insulated armoured, PVC outter sheathed 1100V, grade cables of the following sizes. ( Cable shall be suitable for -15ºC to + 50ºC temprature condition )
180	88.1	3.5c * 70sqmm Al, XLPE, arm	5	Mtrs
181	88.2	3.5c * 50sqmm Al, XLPE, arm	100	Mtrs
182	88.3	3.5c * 35sqmm Al, XLPE, arm	5	Mtrs
183	88.4	4c * 25sqmm Al, XLPE, arm	5	Mtrs
184	88.5	4c x 16 sqmm copper,XLPE, arm	100	Mtrs
185	88.6	4c x 10 sqmm copper, XLPE, arm	2620	Mtrs
186	88.7	4c x 6 sqmm copper, PVC, arm	5	Mtrs
187	88.8	4c x 2.5 sqmm copper, PVC, arm	5	Mtrs
188	89	SUB TOTAL OF MV CABLE SUPPLY
189	90	LIGHTING FIXTURES (Supplying & installation of following fixtures shall be complete in everyway.System output of each luminaire lm/watt shall be given by vendor alongwith the boq. )
190	91	Supplying & installation of Integral LED 4 ft luminaire with CRCA housing and PC Glossy cover. The luminaire should have a color consistency SDCM < 5, CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 classification. Luminaire shall be designed to emit at least 4000 nominal lumens at a system efficacy of atleast 115 lumen/watt with a maximum system wattage of 34 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <10% and suitable for an operationg voltage range of 140-270V AC.The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.	64	Nos
191	92	Supplying & installation of LED 2x2 luminaire with CRCA housing suitable with fully diffused diffuser for general lighting in office areas. The luminaire should have a color consistency SDCM < 5, CRI > 80 and CCT of both 4000K / 6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3600 nominal lumens and an outstanding backlit solution efficacy of atleast 120 lumen/watt and maximum system wattage of 31 Watts. The lumanaire should have outstanding backlit solution efficacy.The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <10% . he fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.	34	Nos
192	93	Supplying & installation Recess LED 300 x 1200 mm fitting made of CRCA and PMMA diffuser. Fixture should have minimum efficacy at System level (Not Chip Level) >=120lumens/watt and a minimum system lumen output of 3000 lumens and maximum system wattage of 23W. Luminaire should have Life of 50000hrs@L70B50 Lumen maintenance, CCT up to 4000/6500K, CRI >80, PF >0.9, THD<10% and an operating Voltage Range of 140 - 270 Internal Surge Protection 2.5KV.The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters	5	Nos
193	94	Supplying & installation LED indoor surface downlighter suitable for general lighting. Luminaire should have polycarbonate cover with diffused optics. The luminaire should have CRI > 80 and CCT of 3000K/4000K/6500K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of 2000 lumens and maximum system wattage of 18 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 , THD <10%. he fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.	105	Nos
194	95	Supplying & installation of LED indoor recessed downlighter suitable for general lighting. Luminaire should have die cast heat sink with reflector of PC and high quality diffuser. The luminaire should have CRI > 80 and CCT of 3000K/4000K/6500K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of 1500 lumens and maximum system wattage of 13.5 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 , THD <10%. The fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.	58	Nos
195	96	Supplying & installation of LED indoor Recess downlighter suitable for general lighting. Luminaire should have polycarbonate cover with diffused optics. The luminaire should have CRI > 80 and CCT of 3000K/4000K/6500K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 95 lumen/Watt and a minimum system lumen output of 1000 lumens and maximum system wattage of 11 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 , THD <10%. he fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Surface.	5	Nos
196	97	Supplying & installation of LED indoor surface downlighter suitable for general lighting. Luminaire should have polycarbonate cover with diffused optics. The luminaire should have CRI > 80 and CCT of 3000K/4000K/6500K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 100 lumen/Watt and a minimum system lumen output of 1200 lumens and maximum system wattage of 12 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 , THD <10%. he fixture should comply with the parameters as per IS10322. The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.	8	Nos
197	98	Supplying & installation of Integral LED 2 ft luminaire with extruded almunium housing with PC cover. The luminaire should have a color consistency SDCM < 5, CRI > 80 and CCT of4000/ 6500K. The luminaire shall be compliant with IP20 classification. Luminaire shall be designed to emit at least 1200 nominal lumens at a system efficacy of atleast 100 lumen/watt with a maximum system wattage of 12 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 25k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <20% and suitable for an operationg voltage range of 140-270V AC.The LED driver should comply to IEC61000-3-2 ed.3.2, 2009 for Harmonics, IEC61347 -2 -13, 2006 in Conjunction with IEC61347-1 ed.2.0, 2007 for Electrical Safety, IEC62384 ed.1.1, 2011 for performance and IEC61547 ed.2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters	20	Nos
198	99	SUB TOTAL OF LIGHTING FIXTURES
199	100	DATA, TELEPHONE & TV
200	101	Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
201	101.1	1 Pair	10	Mtrs
202	101.2	2 Pair	2000	Mtrs
203	101.3	4 Pair	10	Mtrs
204	102	Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.	50	Mtrs
205	103	Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
206	103.1	20mm	10	Mtrs
207	103.2	25mm	3400	Mtrs
208	104	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
209	104.1	Telephone socket outlet	43	Each
210	104.2	TV antenna socket outlet	1	Each
211	104.3	Data socket outlet	140	Each
212	105	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
213	105.1	1 or 2 Module (75 mmX75 mm)	113	Each
214	105.2	4 Module (125 mmX75 mm)	20	Each
215	106	Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
216	106.1	1 or 2 Module	113	Each
217	106.2	4 Module	20	Each
218	107	Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable	5000	Mtrs
219	108	Supplying and laying following telephone cables.
220	108.1	5 pair 0.6mm arm cable	10	Mtrs
221	108.2	10 pair 0.6mm arm cable	75	Mtrs
222	108.3	20 pair 0.6mm arm cable	10	Mtrs
223	108.4	50 pair 0.6mm arm cable	10	Mtrs
224	108.5	100 pair 0.6mm arm cable	10	Mtrs
225	109	Supplying,fixing,testing & commissioning of following MDF box with module complete in all respect.
226	109.1	10 pair MDF box with module	3	Each
227	109.2	20 pair MDF box with module	1	Each
228	109.3	30 pair MDF box with module	1	Each
229	109.4	50 pair MDF box with module	1	Each
230	109.5	100 pair MDF box with module	1	Each

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Jammu And Kashmir Tenders

Electrical Industry Tenders

Electrical Work Tenders

Electrification Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Internal Electrification Of Central Library Block Of Government Medical College At Anantnag ., Anantnag-Jammu And Kashmir

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Internal Electrification Of Central Library Block Of Government Medical College At Anantnag ., Anantnag-Jammu And Kashmir

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us