Military Engineer Services-MES has published Provision Of Bathroom And Toilet Block Near Or Line Of 11 Inf Div Sig Regt Aren And Provn Of 25 Sink Steel Racks In Kitchen And 50 Flush Tanks With Accessories In Or M. Submission Date for this Tender is 27-07-2020. Shelving and Storage Tenders in GE (Army) Ahmedabad Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Jul-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-07-2020 |
| Name of Work : PROVN OF BATHROOM AND TOILET BLOCK AT BLDG NO NP-198 OF 11 INF DIV SIG REGT (AREN), PROVN OF BATHROOM AND TOILET BLOCK NEAR OR LINE OF 11 INF DIV SIG REGT (AREN) & PROVN OF 25 X SINK, STEEL RACKS IN KITCHEN & 50 X FLUSH TANKS WITH ACCESSORIES IN OR MD ACCN OF 53 ENGR REGT AT AHMEDABAD CANTT (TENDER ID : 2020_MES_358464_2) | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in trenches n,exc 1.5 mtr deep & wide and getting out in any type of soil and n.exc 10 sqm on plant complet all as specified and directed. | 152 | Cum | |
| 2 | 2 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggt in foundation, filling, mass concrete complet all as specified and directed. | 4.4 | Cum | |
| 3 | 3 | M&L mild steel TMT bar 10 mm dia or above as in rainforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complet all as specified and directed. | 4490 | Kg | |
| 4 | 4 | M&L mild steel TMT bar 6mm to 8mm dia or above as in rainforcement cut to length bend to shape required and binding with and incl mild steel wire (annealed ) not less than 0.9 mm dia complet all as specified and directed. | 1010 | Kg | |
| 5 | 5 | M&L for Mild steel TMT bar 8 mm dia as in stirrups incl bending and binding with and incl mild steel wire not less than 0.9 mm dia complet all as specified and directed. | 1100 | Kg | |
| 6 | 6 | M&L for use and waste for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticla or to batter,surface finished fair complete. | 128.4 | Sqm | |
| 7 | 7 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) | 151.96 | Sqm | |
| 8 | 8 | M&L Formwork to sides and soffits of floor or roof beams, beam haunch girders, bressummers,lintels, cantilevers, shelves including supports,overhangs etc. also splays between floors and beams, etc. | 90 | Sqm | |
| 9 | 9 | M&L, Form work to sides of pillars posts, struts, piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape all as specified & as directed | 80 | Sqm | |
| 10 | 10 | M&L for use and waste for Form work to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and simila rwork exc 10cm but n exc 20cm | 70 | Rm | |
| 11 | 11 | M & L for providing reinforced cement concrete M25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc complete all as specified and as directed | 16 | Cum | |
| 12 | 12 | M & L for providing reinforced cement concrete M25 design mix as in columns, pillars, piers, posts and struts etc complete all as specified and as directed | 7.82 | Cum | |
| 13 | 13 | M & L for providing reinforced cement concrete M25 design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed. | 17.56 | Cum | |
| 14 | 14 | M & L for providing reinforced cement concrete M25 design mix in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed | 16.34 | Cum | |
| 15 | 15 | Returning ,filling in ,including ,spreading , levelling , watering and well ramming in layers n, exc, 15 cm . | 115 | Cu m | |
| 16 | 16 | Removing excavated material n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point. | 60 | Cum | |
| 17 | 17 | M&L brick work with sub class "B" old size bricks straigth or curved on plan exc 6m mean radius built in CM (1:6) cmplete all as specified. | 50 | Cum | |
| 18 | 18 | M&L Damp proof course 40mm In cement concrete 1:2:4, type B-0,to horizontal or vertica surfaces including necessary formwork complete all as specified and directed. | 14.28 | Sqm | |
| 19 | 19 | Filling under floor with excavated soil as required from item No 01 above and spreading and levelling in layers including watering and well ramming. | 18.92 | Cum | |
| 20 | 20 | M&L hardcore of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick using broken stone complete all as specified and directed. | 23 | Cum | |
| 21 | 21 | M & L for 75 mm thick PCC type D-2, 1:4:8 (40mm graded aggregate) as in sub base of flooring complete all as specified. | 94.136 | Sqm | |
| 22 | 22 | M&L for PCC (1:3:6)type C-2 using 40mm graded aggregate 75mm thick as in plinth protection all as specified | 52.1 | Sqm | |
| 23 | 23 | M&L half brick thick brick work with sub class "B" bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified. | 135 | Sqm | |
| 24 | 24 | M&L for 10mm thick rendering in CM 1:3 finished even and smooth without using extra cement on ceiling ,chajja etc complete all as specified and directed. | 177 | Sqm | |
| 25 | 25 | M & L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement complete all as specified and directed. | 314 | Sqm | |
| 26 | 26 | M & L for 15 mm thick cement plaster in cement mortar 1:6 on concrete or brick surface and finished even and smooth w/o using extra cement | 59.22 | Sqm | |
| 27 | 27 | M&L for Non Skid ceramic coloured joint free tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed CM 1:6 complete all as specified and directed. | 123.272 | Sqm | |
| 28 | 28 | M&L for Glazed ceramic coloured joint free tiles of size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 15mm thick Backing coat CM 1:4 complete all as specified and directed. | 406 | Sqm | |
| 29 | 29 | M&L 18-20mm thick Granite (of any type) work (tablee rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed. | 8 | Sqm | |
| 30 | 30 | S&F factory made solid panel PVC door shutter 30mm thick (stylel)consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC "C" channel having a VC sheet strip of 20mm width stuck inside with solvlent cement for stiles and plain colour,PVC sheet for top rail,lock rail & bottom rail ,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stlyles and rail with suitable PVC sheet beading and joined together with solvlent cement and fixing in the frame of site as per specification and drawing given in page No 146 of SSR Pt-II (2004)(make Raj shree or equivalent ) | 43.6 | Sqm | |
| 31 | 31 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification & drawing complete all as specified. | 149.4 | RM | |
| 32 | 32 | S&F 150mm long aluminium anodised barrel tower bolt of extlruded section | 60 | Each | |
| 33 | 33 | S&F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed | 96 | Each | |
| 34 | 34 | M&L for 150mm long extructed aluminium handle fabricated type complete all as specified and directed. | 64 | Each | |
| 35 | 35 | S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed. | 2 | Each | |
| 36 | 36 | S&F powder coated aluminium ventilator partly louvered and partly fixed with and incl 4 mm thick frosted glass , 0.36mm dia and 1.18mm aperture stainless steel jally (Fixed outside of frame) complete. | 9.18 | Sqm | |
| 37 | 37 | Material & Labour for preparation of new surfaces of wall and applying two coats of cement base paint over one coat of primer complete in all respect as specified | 239.02 | Sqm | |
| 38 | 38 | M&l for preparation of newly plastered surfaces of wall and applying three coats of White wash all as specified | 59.22 | Sqm | |
| 39 | 39 | M&l for preparation of newly plastered surfaces of Ceiling and applying two coats of White wash all as specified | 162.06 | Sqm | |
| 40 | 40 | S&F in repair 110mm bore PVC pipe single socket in any length laid in trenches and floor complete all as specified and directed.. | 30 | Rm | |
| 41 | 41 | S&F in repair 75 mm bore PVC pipe single socket in any length laid in trenches and floor complete all as specified and directed.. | 40 | Rm | |
| 42 | 42 | S&F PVC (SWR) vent cowl 75 mm bore | 16 | Each | |
| 43 | 43 | S&F in repair PVC bends any radius 110 mm bore | 4 | Each | |
| 44 | 44 | S&F in repair PVC bends any radius 75 mm bore | 8 | Each | |
| 45 | 45 | S&F in repair PVC (SWR) 110 mm dia branch piece, single ‘Y’ equal or unequal | 4 | Each | |
| 46 | 46 | S&F in repair PVC (SWR) 75 mm dia branch piece, single ‘Y’ equal or unequal | 12 | Each | |
| 47 | 47 | S&F in repair PVC (SWR) 110 mm dia branch piece, single ‘Y’ double or unequal | 2 | Each | |
| 48 | 48 | S&F in repair PVC (SWR) 75 mm dia branch piece, single ‘Y’ double or unequal | 8 | Each | |
| 49 | 49 | S&F PVC floor trap with grating including jointing waste pipe in runlead 75mm dia fixed in jointing with solvent cement complete as per direction by Engrin-Charge. | 53 | Each | |
| 50 | 50 | S&F viterous china wash down water closet pan (pedestal pattern) white complete complete all as specified and directed. | 4 | Each | |
| 51 | 51 | S&F plastic water closet seat cover white closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete | 4 | Each | |
| 52 | 52 | S &F vitreous china water closet Squatting Orissa patern white size 580 x 440mm with integral foot rest with P or S trap including, fush pipe etc compete all as specified. | 16 | Each | |
| 53 | 53 | S&F CP health faucet fixed to water closet any type of WC complete all as specified and directed. | 20 | Each | |
| 54 | 54 | S&F vitreous china wash basin, white flat back size 550x400 mm including waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand but excl taps, chain and plug complete all as specified and directed. | 20 | Each | |
| 55 | 55 | S&F decorative type Mirror of 5 to 6 mm thick with beveled /grind and fixed with studs including 8 to 9 mm thick PVC solid sheet backing and PVC beading/border all around of size as specified and all as directed by Engineer-In-Chagre | 20 | Sqm | |
| 56 | 56 | S&F in repair brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe | 12 | Each | |
| 57 | 57 | S&F C.P towel Rail 60 cm long ‘D’ type 20 mm dia complete all as spfd. | 20 | Each | |
| 58 | 58 | Supply and fixing for steel water tubing medium grade galvanised incl short length fixed to wall ceiling or laid in floors with all fittings (Such as bends elbow, tee, short pieces, connections back buts dimnishing pieces, caps and plugs union etc) of 15mm bore complete all as specified | 350 | RM | |
| 59 | 59 | All as per srl item No 58 baove but 20mm bore and -ditto- | 200 | RM | |
| 60 | 60 | Supply and fixing stop valves/angle cock 15mm bore cost copper alloy srewed dowh gigh pressure,brass polished finished with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed complete all as specified and directed | 100 | Each | |
| 61 | 61 | Supply and fixing bib taps cost copper ally with crutch or butterfly handles screwed for iorn pipe or for brass derrule and fixed to 15mm bore pipe complete all as specified and directed | 90 | Each | |
| 62 | 62 | Supply and fixing low density PVC connection commercial quality 450mm long incl PTMT nuts at both sides of 15mm bore and fixed complete all as specified and directed. | 100 | Each | |
| 63 | 63 | Supply and fixed pillar taps cast copper alloy with capstan head, chroumim plated fancy type. Screwed down high pressure with or w/o lettered "Hot" or "cold" with long screwed shanks and flynuts of 15mm bore complete. | 20 | Each | |
| 64 | 64 | S&F in repair PVC flusing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC with CI brackets and making good disturbed area complete all as directed. | 70 | Each | |
| 65 | 65 | S&F 1000 ltr Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 litres capacity complete all as specified and directed. | 8 | Each | |
| 66 | 66 | S&F vitreous china urinal bowl type ( back or corner wall type and fixing plugs beeding urinal against wall in cement mortar 1:2 securinal plugs with and 60mm long brass screws, pointing arroud urinal backin cement and with grating and union for discharge pipe complete all as specified and directed.. | 6 | Each | |
| 67 | 67 | M&L Salt-glazed stoneware gully trap 125/100 mm, setting and jointing with solvent cement | 30 | Each | |
| 68 | 68 | S&F Concealed angular Stop cock valves regular body with adjustable wall flange 15 mm dia screwed down fixed .(Make: Prayag,Jaquar,Cera or equivalent)and as selected,specified and directed by Eng-in-charge. | 12 | Each | |
| 69 | 69 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed | 245 | Rm | |
| 70 | 70 | S&F steel work in tubular trusses, purlins, including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240, including distances pieces, base plates, nut bolts etc including complete all as specified and directed. | 142 | Kg | |
| 71 | 71 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk)forming holes, clits etc including welding as necessary conforming to Fe-290 Gde E-165. | 20 | Kg | |
| 72 | 72 | S&F 10mm thick multi wall Polycarbonate sheet of colour as approved, fixed in roofs, wall clading etc with screw - bolts as per manufacturers instruction complete all as specified and directed.\n | 21.4 | Sqm | |
| 73 | 73 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified. | 30 | Sqm | |
| 74 | 74 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundation. | 2.2 | Cum | |
| 75 | 75 | Supply only Integral waterproofing compound | 12 | Kgs | |
| 76 | 76 | M&L for PCC (1:2:4) type B-0 using 20mm graded crushed stone agg as in coping /benching in man hole etc,finished even and smooth using extra cement incl necessary form work | 1.4 | Cum | |
| 77 | 77 | M&L for PCC(1:3:6) type C-2(Using 40mm graded stone aggregate) to bed of drain pipe incl. packing under and haunching against the pipe after they are laid and tested for 200mm bore complete all as specified & directed. | 48 | RM | |
| 78 | 78 | M&L for laying and jointing RCC Class NP-2 drain pipewith collars of internal dia 200mm complete all as specified and directed. | 52 | RM | |
| 79 | 79 | Removing excavated soil exc 1.5 KM and deposited where directed at available n exc 5.0 KM above the starting points. | 20 | Cum | |
| 80 | 80 | M&L pre-cast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landing cover slabs (for manholes etc) complete all as specified & directed (reinforcement shall be measured & paid separately). | 1.5 | Cum | |
| 81 | 81 | M&L mild steel round bars 10mm dia and over ,Fe-410-W (Gde.E-250) ,quality-A or Fe 290 (Gde - E-165) cut to length bent to shape required & cranking, binding, spirally for hopping for hooking ends & binding with MS steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. | 40 | Kg | |
| 82 | 82 | M&L for cutting into existing manholes for connecting new drain pipe making good to pipe & rendering cutting out existing benching for and forming branch channel(1/2 round or ¾ in section) in cement concrete 1:2:4 type B-1 smooth finish and reforming benching as required complete for 150mm internal dia pipe all as directed. | 4 | Each pipe | |
| 83 | 83 | M&Lfor precast PCC kerbs stone machine pressed factory made of size 250 to 450mm long 100mm thk and 350mm depth in PCC 1:2:4 type BO using 12.5mm graded curshed stone aggregate incl neceassary earth work . | 35 | RM | |
| 84 | 84 | M&L 100mm thick cement concrete type D2 1:4:8 (40mm graded stone aggregate) incl necessary formn work as in sub base of path complete all as specified | 50 | Sqm | |
| 85 | 85 | M&L sand filling 50mm thick over floor or in foundations incl well ramming complete all as specified and directed. | 2.5 | Cum | |
| 86 | 86 | M&L machine pressed pre-cast coloured designer type concrete inter-locking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment | 50 | Sqm | |
| 87 | 87 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx 355mmx 200mm, model NO SSJ-9 complete all as specified and directed. Make: Nirali / Jayna / Blue Star. | 22 | Each | |
| 88 | 88 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 610mmx460mm bowl size 560mmx410mmx200mm, Make: Nirali / Jayna / Blue Star. | 3 | Each | |
| 89 | 89 | S&F Stainless steel Ist grade kitchen plate rack , size 24x36x10 inches complete all as specified and directed. Make: Nirali / Jayna / Blue Star. | 50 | Each | |
| 90 | 90 | S&F 40mm dia PVC waste pipe flexible 750mm long including nut washer cup bracket complete all as specified and directed by Engr-in-Charge | 25 | Each | |
| 91 | 91 | Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed by the EIC. | 120 | Sqm | |
| 92 | 92 | Material & labour for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over 3mm wall care putty (Birla white or equivalent) all as specifed. | 15 | Sqm | |
| 93 | 93 | Demolition of cement concrete (Un-reinforced) in ground floor and paving nexc 15cm thick above or below GL complete all as specified. | 1 | Cum | |
| 94 | 94 | M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) 25mm thick finished rough for laying floor tiling | 25 | Sqm | |
| 95 | 95 | S&F in repair 110mm bore PVC pipe single socket in any length laid in trenches and floor. | 50 | Rm | |
| 96 | 96 | S&F in repair 75 mm bore PVC pipe single socket in any length laid in trenches and floor. | 25 | Rm | |
| 97 | 97 | M&L 32mm dia low density poly ethylene pipes (LDPE) of pressure rating 6Kgf/cm2 fixed complete to wall , ceiling or in floors etc | 50 | RM | |
| 98 | 98 | Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :- | |||
| 99 | 98.1 | One light point controlled by one switch. | 54 | Point | |
| 100 | 98.2 | One fan point controlled by one switch. | 20 | Point | |
| 101 | 99 | Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete. | 8 | Point | |
| 102 | 100 | S&F switch piano flush button single pole one way 6 amp complete. | 74 | Each | |
| 103 | 101 | S&F switch piano flush button single pole one way 16 amp complete. | 8 | Each | |
| 104 | 102 | S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete. | 8 | Each | |
| 105 | 103 | S&F ceiling rose 6 amp, 3 plates polycarbonate body complete. | 74 | Each | |
| 106 | 104 | S&F LED batten (1.2 m) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not more than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or equivalent in Wipro or C & S Elect as approved. \n | 12 | Each | |
| 107 | 105 | S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Bajaj or Havells as approved. | 8 | Each | |
| 108 | 106 | S&F MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. | 2 | Each | |
| 109 | 107 | S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:- | |||
| 110 | 107.1 | Single pole 6 to 16 amp. Make - Legrand DX3 cat ref no. 408587 to 408592 or equivalent in Schneider or Hager as approved. | 12 | Each | |
| 111 | 107.2 | Double pole 32 amp. Make - Legrand DX3 cat ref no. 408636 or equivalent in Schneider or Hager as approved. | 2 | Each | |
| 112 | 108 | S&F ventilating fan single phase, 230 volts, 250 mm sweep, PVC plastic body with mounting rings all as per Havells cat ref no. Ventil Air-DX or equivalent in Almonard / CG / Bajaj as approved. | 20 | Each | |
| 113 | 109 | S & F LED fixtures 8 watt including connection as per Philips LED LINEA cat ref no. BN 550 WLED 6 - 6500 or equivalent in wipro or Havells as approved. | 34 | Each | |
| 114 | 110 | M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete. | 2 | Set | |
| 115 | 111 | S&F steel tubes light grade galvanised with all fittings fixed to walls / floors / poles / road crossing etc of 40 mm bore complete. | 28 | RM | |
| 116 | 112 | Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete. Make - Havells / Polycab / Finolex as approved. | 235 | RM | |
| 117 | 113 | M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete. | 19 | Cum | |
| 118 | 114 | Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete. | 1804 | Each | |
| 119 | 115 | Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete. | 3 | Each | |
| 120 | 116 | M&L for stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore complete. | 5 | Each | |
| 121 | 117 | M&L for gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50 mm bore complete. | 5 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
