Special Repairs To Bldg No P-213 At Thimmayya Line And Provn Of Security Wall Between Family Qtr And Coy Garage Of 554 Asc Bn Under Age B/R ( South ) No I And Age E/M ( South ) Of Ge ( South ) Secunderabad
Tender Value
41.50 Lakhs
Estimated cost
Bid Submission
31 Jul 2020
0 days left
EMD
83000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Secunderabad → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repairs To Bldg No P-213 At Thimmayya Line And Provn Of Security Wall Between Family Qtr And Coy Garage Of 554 Asc Bn Under Age B/R ( South ) No I And Age E/M ( South ) Of Ge ( South ) Secunderabad
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Jul-2020 | Amendment to tender doucuments | Other | 31-Jul-2020 |
BOQ
| Name of Work: SPECIAL REPAIRS TO BLDG NO P-213 AT THIMMAYYA LINE AND PROVN OF SECURITY WALL BETWEEN FAMILY QTR AND COY GARAGE OF 554 ASC BN UNDER AGE B/R (SOUTH) NO I AND AGE E/M (SOUTH) OF GE (SOUTH) SECUNDERABAD | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Surface dressing n exc 15 cm deep in hard and dence soil | 240 | Sqm | |
| 2 | 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation and getting out in hard / dense soil. | 104 | Cum | |
| 3 | 3 | Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation area n.exc. 10 Sq.m on plan and getting out in hard rock use of mechanical plant or chisel cutting. | 18 | Cum | |
| 4 | 4 | Returning and filling in including spreading, levelling watering and well ramming in layers n.exc 25CM in hard dense soil. | 37 | Cum | |
| 5 | 5 | Removing excavated materials n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point. | 69 | Cum | |
| 6 | 6 | M&L for PCC type D2 1:4:8 using 40 mm graded stone aggregate for filling in sunken floors /foundation filling mass concrete complete all as specified. | 14 | Cum | |
| 7 | 7 | Supply only integral water proofing compound for roof and sunken floor complete all as specified. | 55 | Kg | |
| 8 | 8 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate for bed block complete all as specified | 0.5 | Cum | |
| 9 | 9 | M&L for Reinforced cement concrete (Design mix) type M-25 (20 mm graded stone aggregate) using foundation, footing, foundation beams, plinth beams etc. | 27 | Cum | |
| 10 | 10 | M&L for Reinforced cement concrete (Design mix) type M-25 (20 mm graded stone aggregate) using columns, pillars, posts etc. | 13 | Cum | |
| 11 | 11 | M&L for pre-cast cement concrete block masonry (type C1 1:3:6 20mm graded stone aggregate) with solid blocks exc 10 cm in width and setting in cm 1:6 complet all as specified. | 58 | Cum | |
| 12 | 12 | Reinforced cement concrete (nominal mix) type B0 1:2:4 (12.50 mm graded stone aggregate) using in coping and similar work including necessary form work all as directed by Engr-in-charge. | 7 | Cum | |
| 13 | 13 | Cutting holes in brickwall builtin cement mortar depth ofembedded portion of holdfast exc halfbrick but not exc one brick and making good dismantled portion in cement mortar 1:3 complete all as specified. | 48 | Each | |
| 14 | 14 | Cutting Chases , pinning in , making good to facing where required and pointing in CM 1:3 to ends or edges of landings , steps , cills , sunshades , shelves , lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good of cutting in brick wall n.exc 10 cm girth complete all as specified . | 20 | RM | |
| 15 | 15 | M&L for 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13sqcm but not exceeding 25 sqcm complete all as specified | 80 | RM | |
| 16 | 16 | M&L for formwork to sides of concret foundation, footing, bases of coloumn, plinth beam and similar work. complete all as specified | 139 | Sqm | |
| 17 | 17 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar work. complete all as specified | 192 | Sqm | |
| 18 | 18 | Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each incl steel window, ventilators etc complete all as specified. | 56 | Each | |
| 19 | 19 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 Sqm each but n.exc. 4 sqm each | 24 | Each | |
| 20 | 20 | M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions all as directed by Engineer-in-Charge. | 37.6 | RM | |
| 21 | 21 | S&F Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications and drawing. | 11.2 | Sqm | |
| 22 | 22 | M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed rebated and solid, rounded or chamfered, put together with glue pinned at joints complete all as specified | 1.2 | Cum | |
| 23 | 23 | M&L for 35 mm thick flush door shutters solid core construction with black board core with decorative face finish on one sides all as directed by Engr-in-Charge | 28.8 | Sqm | |
| 24 | 24 | M&L for factory made 35mm thick 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003(Part-I), kiln seasoned and chemically pressure treated , complete all as specified and directed by Engineer-in-Charge, | 16.54 | Sqm | |
| 25 | 25 | S&F glazed and skelton shutters 35mm thick second class hard wood. divided into squares with plain, chamfered or rounded, mitred and rebated sash bars prepared to receive glass, gauge sizes of members of shutters as specified in SSR Pt-I, section 8 , clause 8.24 (A) | 8.87 | Sqm | |
| 26 | 26 | S&F in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commerecial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers comoplete all as specified and s directed. | 5 | Each | |
| 27 | 27 | S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified. | 24 | Each | |
| 28 | 28 | S&F MS butt hinges, medium weight cold rolled mild steel and fixed sized 100 mm complete all as specified | 120 | Each | |
| 29 | 29 | S&F 150mm size aluminium anodised handles, fabricated type complete all as specified. | 96 | Each | |
| 30 | 30 | S&F 100 mm Extruded brass handles, for cupboards fabricated type complete all as specified and directed. | 16 | Each | |
| 31 | 31 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified. | 16 | Each | |
| 32 | 32 | S&F 200mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified | 56 | Each | |
| 33 | 33 | S&F in repairs double action spring hinges mild steel with spring, stove enamelled black 100 mm long comp,ete all as specified and as directed. | 4 | Each | |
| 34 | 34 | S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and aerage width of aperature 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified. | 60 | Sqm | |
| 35 | 35 | S&F 300 mm long Brass, sliding door bolt withsand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed . | 6 | Each | |
| 36 | 36 | M&L aluminium alloy anodised sliding door bolt with hasp staple (bolt type) length 300mm fixed complete all as specified | 20 | Each | |
| 37 | 37 | S&F floor rubber door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor 140 mm length complete all as specified | 56 | Each | |
| 38 | 38 | S&F Hasp and staple 100 mm size aluminium anodised fixed with screws complete all as specified | 8 | Each | |
| 39 | 39 | S&F continuous (piano) hinges 30 mm width of flap, brass, bright finish or electrogalvanised complete all as specified. | 40 | RM | |
| 40 | 40 | S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished complete all as specified. | 24 | Each | |
| 41 | 41 | S&F 20mm dia CP Decorative type draphery curtain rods with brackets of approved quality as in repair all as directed by Engr-in-Charge | 70 | RM | |
| 42 | 42 | S&F in repairs brass chromium plated tubular towel rail 600 mm long all as directed by Engr-in-charge | 4 | Each | |
| 43 | 43 | S & F powder coated anodised aluminium frame,three track sliding for windows, fixed/top hung frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. | 300 | Kg | |
| 44 | 44 | S & F powder coated anodised aluminium sliding window shutter and top hung ventilator shutters without sash, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing ,locking arrengement complete all as specified and directed.(note: Glass pan and wire mesh shall be measured and paid seperatly in respective items of shedule A) | 108 | Sqm | |
| 45 | 45 | M&L for Mild steel frame work such as grills framed guard bars confirming to IS Fe 410 -0 or Fe310-0 | 420 | Kg | |
| 46 | 46 | S&F mild steel flat iron as in hold fast complete all as specified. | 15 | Kg | |
| 47 | 47 | M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking beinding spirally hopping and binding wisth and dincluding mild steel wire (annelid not less than 0.9mm dia) | 3333 | Kg | |
| 48 | 48 | M&L for mild steel TMT bars 6 to 8 mm dia and over cut to length, bent to shape required, including cranking beinding spirally hopping and binding wisth and dincluding mild steel wire (annelid not less than 0.9mm dia) as in strrups etc. | 293 | Kg | |
| 49 | 49 | M&L for mild steel TMT bars 5 dia and over up to and including 10 mm dia in stirrups, spaces and binders | 1557 | Kg | |
| 50 | 50 | S&F MS angle iron as in posts and struts as in fencing including cutting tops to shape as directed, drilled holes notching for wire etc incl all necessarydrilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165. | 267 | Kg | |
| 51 | 51 | S&F galvanised two strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts ,including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins. complete all as specified. | 6 | 100 RM | |
| 52 | 52 | M&L for providing water proofing felt having glass fibre non woven reinforcement and weighing 3 to 4 kgs /Sqm (APEX or Equivalent as specified ) in 100 mm overlaps both longitudinally and transversely by torch bonding over coat of hot blown bitumen 85/25 at the rate of 1.2 kgs per sqm as in sunken floor ( bottom and vertical surfaces ) complete all as specified and directed. | 15 | Sqm | |
| 53 | 53 | M &L for priming plastered roof surfaces with bituminous primer @ 0.3 Kg/Sqm as per IS 3384 and providing water proofing treatment by applying mineral finish 3.50 kgs/sqm atactic propylene (advanced APP touch on membrane mineral finish) having polyster film reinforcement stabilised with fibre glass and finished on top with grey mineral slates torch on system of thickness 3.00 mm by torch bonding complete all as specified and as directed. | 375 | Sqm | |
| 54 | 54 | M&L for prelaminated particle board of 18/19 mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards, book case etc complete all as specified | 30 | Sqm | |
| 55 | 55 | S&F 12 mm thick plywood BWR type fixed with screws with timber framework complete all as specified | 10 | Sqm | |
| 56 | 56 | M&L for 25 mm thick Plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates as in floor complete all as specified and as directed. | 260 | Sqm | |
| 57 | 57 | M&L for 10mm thick vetrified light shade polished ceramic tiles,area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engr-in-Charge. | 220 | Sqm | |
| 58 | 58 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as directed by Engr-in-Charge. | 20 | Sqm | |
| 59 | 59 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as directed by Engr-in-Charge. | 40 | Sqm | |
| 60 | 60 | M&L for 10mm thick vetrified light shade polished ceramic tiles, area of each tile not exceeding 0.36 sqm, in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in CM 1:4 complete all as specified and as directed by Engr-in-Charge. | 20 | Sqm | |
| 61 | 61 | M&L for glazed ceramic coloured tiles 300x200x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as directed by Engr-in-Charge. | 120 | Sqm | |
| 62 | 62 | M&L for Machine cut kota stone slab flooring 18-20mm thick over cement mortar screed 20mm thick base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete | 50 | Sqm | |
| 63 | 63 | M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and asdirected. | 20 | Sqm | |
| 64 | 64 | M&L for granite slab flooring 20 to 25 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone indluding cutting and polishing types over 20 mm thick screed bed in CM 1:6 including making hole in platform for gas pipe | 8 | Sqm | |
| 65 | 65 | Rounding to edges of stone slabs one edge such as in slopes cooking platform and other similer shine | 10 | RM | |
| 66 | 66 | M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded aggregate) as in floor complete all as specified and directed. | 50 | Cum | |
| 67 | 67 | M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (12.5 mm graded aggregate) as in floor complete all as specified and directed. | 50 | Sqm | |
| 68 | 68 | M&L for PCC (1:3:6) type C1 using 20 mm graded aggregate as in plinth protection of average 75mm thick. Finishing cement concrete surface even and smooth without using extra cement complete all as specified. | 100 | Sqm | |
| 69 | 69 | Roughening surfaces of old concrete floor by picking sweeping cleaning & washing down with water to remove dust etc incl removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 Kg/Sqm complete all as directed by Engr-in-Charge. | 50 | Sqm | |
| 70 | 70 | M&L for 40 mm thick plain cement concrete (1:2:4) type B1 using 12.5 mm graded stone aggregates as in padding (level course) on roof finishing cement concrete surfaces even & smooth without using extra cement complete all as specified and as directed. | 325 | Sqm | |
| 71 | 71 | Rendering 10 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in roof and chajjas complete without using extra cement all as directed by Engr-in-Charge. Note : Water proofing compound will be measured and paid separately. | 325 | Sqm | |
| 72 | 72 | Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified. | 900 | Sqm | |
| 73 | 73 | M&L for rendering 15mm thick on fair faces of brick works in cm 1:6 finished even and smooth without using extra cement complete all as specified. | 1141 | Sqm | |
| 74 | 74 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smoth without using extra cement complete all as specified. | 315 | Sqm | |
| 75 | 75 | M&L for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified. | 200 | Sqm | |
| 76 | 76 | M&L for prepartion of new plastered surfaces on wall applying two coats of oil bound distemper over a coat of primer including 3mm thick in two coats wall care putty complete all as specified. | 400 | Sqm | |
| 77 | 77 | M&L for preparation of new plastered surfaces over applying three coats of white wash on wall surfaces complete all as specified. | 50 | Sqm | |
| 78 | 78 | M&L for preparation of new plastered surfaces on wall including applying three coats of white wash on ceiling complete all as specified. | 200 | Sqm | |
| 79 | 79 | M&L for complete removal of existing treatment and applying three coats of white wash on wall surfaces complete all as specified. | 200 | Sqm | |
| 80 | 80 | M&L for complete removal of existing treatment and applying three coats of white wash on ceiling complete all as specified. | 520 | Sqm | |
| 81 | 81 | M&L for preparation of new plastered on wall including applying two coats of weather proof exterior emulsion (APEX) paint over a coat of primer complete all as specified. | 300 | Sqm | |
| 82 | 82 | M&L for complete removal of existing wall treatment and applying two coats of OBD over a coat of primer including 3 mm thick wall care putty (in two coats) complete all as specified. | 200 | Sqm | |
| 83 | 83 | M&L for complete removal of existing treatment and applying two coats of weather proof exterior emulsion(APEX) paint over a coat of primer on wall surfaces complete all as specified. | 250 | Sqm | |
| 84 | 84 | M&L preparation of new plastered wall surface and applying two coats of cement base paint over a coat of primer complete all as specified. | 741 | Sqm | |
| 85 | 85 | S & F 5.5 mm thick Sheet glass, ordinary quality in squares exceeding 0.5 Sq. M in each pane fixed to aliminium frame work complete all specified. | 72 | Sqm | |
| 86 | 86 | S & F 4 mm thick Figured glass, pin headed type in squares not exceeding 0.5 Sq. M in each pane.fixed to aliminium frame work complete all specified. | 8 | Sqm | |
| 87 | 87 | M&L for preparation of new steel surfaces of any discripton not otherwise discribed over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide on steel surfaces complete all as specified. | 87 | Sqm | |
| 88 | 88 | M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of wooden surfaces exceeding 10 CM girth or width complete all as specified and directed. | 126.74 | Sqm | |
| 89 | 89 | M&L for preparation of old painted wooded surfaces and applying one coat of synthetic enamel paint complete all as specified | 10 | Sqm | |
| 90 | 90 | S&F in repair vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity complete as directed by Engr-in-Charge. | 8 | Each | |
| 91 | 91 | S&F in repair vitreous china orrisa pan squatting pattern 580 X 440mm with integeral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacity complete as directed by Engr-in-Charge. | 1 | Each | |
| 92 | 92 | Supply & fixing in repair vitreous china wash basin with padestal , white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT , PVC waste pipe complete all as specified and directed. | 5 | Each | |
| 93 | 93 | S&F 15 mm dia 45 cm long PVC water connection with PTMT nuts and washers all as directed by Engr-in-Charge. | 15 | Each | |
| 94 | 94 | S&F PVC bathroom cabinet with door fitted with looking mirror as per sample approved and all as directed by Engr-in-charge | 4 | Each | |
| 95 | 95 | S&F in repair CP Soap dish fixed with chromium plated brass screw. | 8 | Each | |
| 96 | 96 | S&F HDPE pipes or pressure rating 6kgf/sqcm of 40 mm dia fixed/concealed on walls or floors all as directed by Engr-in-Charge. | 12 | RM | |
| 97 | 97 | S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes. | 100 | RM | |
| 98 | 98 | S&F GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes. | 80 | RM | |
| 99 | 99 | S&L in repairs CI floor trap with grating incl jointing to waste pipe with dia of outlet 75mm complete all as specified | 16 | Each | |
| 100 | 100 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm complete all as specified and as directed. | 30 | RM | |
| 101 | 101 | S&F 110 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall/Floors. | 53 | RM | |
| 102 | 102 | S&F PVC (SWR) bends 110 mm all as specified and as directed. | 8 | Each | |
| 103 | 103 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm complete all as specified and as directed. | 25 | RM | |
| 104 | 104 | S&F PVC (SWR) bends 75 mm all as specified and as directed. | 8 | Each | |
| 105 | 105 | S&F PVC SWR branch pieces single (equal or unequal) (size or socket type or with parallel branches with access door bore of the pipe 110 mm) complete all as specified. | 4 | Each | |
| 106 | 106 | S&F PVC SWR branch pieces double (equal or unequal) (size or socket type or with parallel branches with access door bore of the pipe 110 mm) complete all as specified. | 4 | Each | |
| 107 | 107 | S&F PVC SWR branch pieces single (equal or unequal) (size or socket type or with parallel branches with access door bore of the pipe 75 mm ) complete all as specified. | 4 | Each | |
| 108 | 108 | S&F in repairs angle/stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia complete all as specified. | 12 | Each | |
| 109 | 109 | S&F in repair angle/stop valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) all as directed by Engr-in-Charge | 8 | Each | |
| 110 | 110 | S&F in repair Fancy type chromium plated 15 mm Bib taps cast copper alooy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified. | 16 | Each | |
| 111 | 111 | Supply and fix gun metal gate valve 15mm dia with iron wheel head screwed both ends for iron pipe or for union and fixed completely as specified | 1 | Each | |
| 112 | 112 | S&F in repairs Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed. | 6 | Each | |
| 113 | 113 | S & F PVC connecting pipe 45 cm long with two Nos brass chesk nuts and rubber washers suitable for 15 mm dia GI pipe for hot water connection for geysers complete all as specified | 2 | Each | |
| 114 | 114 | S & F Bib taps chrominium plated with crutch or butterfly handle 15 mm dia ,screwed for iron pipe or for brass ferrul and fixed all as specified and directed | 1 | Each | |
| 115 | 115 | S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/20mm-125gms 15mm dia bore fixed in repair | 2 | Each | |
| 116 | 116 | Supply and fix in repair 15 mm bore pillar tap of cast copper alloy with capstan head , chromium plated , fancy type , screwed down high pressure with or without lettered 'Hot' or 'Cold with long screwed shanks and fly nuts , screwed for iron pipe complete all as specified and as directed . | 4 | Each | |
| 117 | 117 | S&F in repair stainless steel sink with draining board made out of 1.00 mm thick sheet for kitchen with plug and washers, waste pipe with cantilever brackets.over all size 915 X 460mm bowl sixe 410mm X 330mm X160mm complete all as specified and directed. | 4 | Each | |
| 118 | 118 | S&F in repairs Stainless steel plate rack of size 1200x900 mm of approved quality complete all as specified and directed. | 4 | Each | |
| 119 | 119 | Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified .Make : Cat No:ALD-579 of Jaquar or equivalent . | 8 | Each | |
| 120 | 120 | S&F in repairs pen jet in water closet (peddestal pattern) complete all as specified. | 8 | Each | |
| 121 | 121 | Supply and fix in repair wall mixer with provision of overhead shower with 115 mm long bend pipe on upper side , connecting legs & wall flanges complete all as specified and as directed .Make :Cat No: FLR-5273UPR of Jaquar or equivalent . | 4 | Each | |
| 122 | 122 | S&F in repairs toilet paper holder, vitreous china, box type coloured, fixed with chromium plated brass screw complete all as specified. | 8 | Each | |
| 123 | 123 | Dismantling water tanks of exc 250 but n.exc 500 ltr capacity and removing to store | 2 | Each | |
| 124 | 124 | Dismantling water tanks of exc 500 but n.exc1000 ltr capacity and removing to store | 4 | Each | |
| 125 | 125 | S&F of rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs complete all as specified and as directed. | 2 | Each | |
| 126 | 126 | S&F of rotational moulded poly thylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs complete all as specified. | 4 | Each | |
| 127 | 127 | S&F 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. | 6 | Each | |
| 128 | 128 | Supply and fix in repair 150 X150 mm overhead shower complete all as specified . Make :Cat No:OHS-CHR-1605 of Jaquar or equivalent . | 4 | Each | |
| 129 | 129 | Supply and fix in repair shower arm 400 X 25 X25 mm square shape for wall mounted shower complete all as specified .Make : Cat No:SHA -455L400 of Jaquar or equivalent . | 4 | Each | |
| 130 | 130 | Supply and fix in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed . | 4 | Each | |
| 131 | 131 | Demolition of stone slabs and tiles of any description or any thickness laid bedded and pointed in any mortar in floors approns etc. | 21.8 | X Sqm | |
| 132 | 132 | Demolition of cement concrete in floors and pavings n.exc15 cm thickness (below or above ground level) complete all as specified | 12.5 | Cum | |
| 133 | 133 | Demolition of cement concrete on Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work cement concrete complete all as specified. | 20.25 | Cum | |
| 134 | 134 | Demolition and beaking up drain AC pipes/PVC pipes set in cement mortar of any dia and size complete all as specified. | 55 | RM | |
| 135 | 135 | Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided including floor finishes complete all as specified and directed. | 13 | Cum | |
| 136 | 136 | Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified. | 82 | Point | |
| 137 | 137 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified. | 4 | Each | |
| 138 | 138 | M & L for Point wiring in concealed conduit with 1.5 Sq mm FRLS wire copper conductor single core PVC insulated 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 2 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc for One light point controlled by one, one way switch 5A, SP all as specified and directed. | 44 | Point | |
| 139 | 139 | All as per Sl item No 138 above, but for One ceiling / exhaust fan point controlled by one, one way switch and regulator | 10 | Point | |
| 140 | 140 | All as per Sl item No 138 above, but for One bell point controlled by one, one way switch 5A, SP | 2 | Point | |
| 141 | 141 | All as per Sl item No 138 above, but for One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board | 7 | Point | |
| 142 | 142 | All as per Sl item No 138 above, but for One 3 Pin 5 Amps switch socket on Independt board | 7 | Point | |
| 143 | 143 | All as per item No 138 above but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated wire 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. | 12 | Point | |
| 144 | 144 | S & F Switch modular type single pole one way flush type 5 Amps capacity 230 volts. | 61 | Each | |
| 145 | 145 | Supply and fix switch modular socket combination flush type multipurpose 2/3 pin 5 Amps, 230 Volts complete all as specified. | 7 | Each | |
| 146 | 146 | Supply and fix modular socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts all as specified | 7 | Each | |
| 147 | 147 | Supply and fix modular switch socket combination flush type multipurpose 5 in 1, 5/16 Amps, 230 Volts complete all as specified. | 7 | Each | |
| 148 | 148 | S & F modular Bell ding dong type AC 230 volts. | 2 | Each | |
| 149 | 149 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified. | 42 | Each | |
| 150 | 150 | S&F Vertical type TPN DB 4 Way double door with incoming as MCCB TP 415 volts AC 3 Phase 50Hz with fixed magnetic setting for current rating of 100 amps 16 KA locking arrangement including painting by redoxide one coat and powder coated all as directed | 1 | Each | |
| 151 | 151 | S and F sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 Volts double door with flush type locking system complete all as specified. | 1 | Each | |
| 152 | 152 | S and F sheet metal enclosure MCB DB SPN 8way double door with 200A rated bus bar 240 Volts double door with flush type locking system complete all as specified | 2 | Each | |
| 153 | 153 | S &F MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB's all as specified | 20 | Each | |
| 154 | 154 | S &F MCB SP 40 to 63 Amps 240 volts for fixing on MCB DB's all as specified | 4 | Each | |
| 155 | 155 | S &F MCB SPN 25 to 32 Amps 240 volts for fixing on MCB DB's all as specified | 1 | Each | |
| 156 | 156 | S &F MCB SPN 25 to 63 Amps 240 volts for fixing on MCB DB's all as specified | 2 | Each | |
| 157 | 157 | Supply and fix wall mounted box type LED batten suitable for 18 w/20w with LED lamp alongwith integrated driver complete all as specified and directed by Engr in charge | 24 | Each | |
| 158 | 158 | S &F wall mounted box type LED batten suitable for 9/10watt with LED lamp alongwith intergrated driver complete all as spcified and directed by Engr in charge | 2 | Each | |
| 159 | 159 | S &F lamp holder insulated body surface bakelite with back plate suitable for angle/batten fittings | 12 | Each | |
| 160 | 160 | supply insrtall tesing and commisssioning of SMC meter boxes suitable for in door/out door with locing arrangement recess in wall/surface mounted, one piece moulded SMC base and SMC door with internal hinges, viewing glass arrangement for wire seal of suitable size for LT three phase KWH meter complete all as directed | 1 | Each | |
| 161 | 161 | M & L for Submain wiring with two single core 10Sq mm PVC insulated wire copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 10 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length. | 75 | RM | |
| 162 | 162 | M & L for Submain wiring with two single core 6 Sq mm PVC insulated wire copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 4 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length. | 72 | RM | |
| 163 | 163 | Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth electrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade. \n\n | 2 | Each Job | |
| 164 | 164 | S & F in replacement of UNSV Security Lights luminaire in single pc drawn aluminium IP 66 with high power LED as light source with acrylic cover suitable for 1x36 w LED lamp including provision of three runs of PVC insulated 1100 volts grade single core cable with copper conductors multistranded cable on bldg all as spcified as directed & including GI pipe bracket for security light fittings made from 25mm dia med grade 1500mm long bend to shape welding etc and fixed on bldg wall with 50x5 mm flat iron MS clamp and necessary nuts bolts and washers complete all as specifed and as directed by engr in charge | 6 | Each | |
| 165 | 165 | M&L for rewinding of exhaust fans of any sweep with super enameled copper wire of suitable size of any make/type/model incl transporation and all accessories required at site for refixing all as directed by Engr-in-Charge. | 1 | Each | |
| 166 | 166 | Supply only wall mounted fan and exhaust fan capacitors of 3.15/4.00 Mfd | 3 | Each | |
| 167 | 167 | Supply only Sealed Bush/ball bearing suitable for exhaust fan of any size | 6 | Each | |
| 168 | 168 | Supply and Fix ceiling fan 1200 mm sweep including down rod and connecting up including provision of cable from ceiliing rose, five star rating, clamps, supports fabricated from structural steel sections including nuts, bolts washersm welding, bending hot or cold, drilling holes for bolts in any shape or size as directed complete all as specified. | 5 | Each | |
| 169 | 169 | S&F PVC body Exhaust Fan AC single phase 230/240 V of size 300 mm sweep with louvre complete including making of hole in wall etc all as specified and as directed by Enginear -in-charge | 2 | Each | |
| 170 | 170 | Disconnecting and removing ceiling fan of 1200/1400 mm sweep from any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/ defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified. Note :- 1. PVC 2 Core copper cable multstandrad of size 0.50 Sqmm from ceiling rose to ceiling fan deemed to be included in the rate quoted by the contractor 2. Necessary repairs/replacement of unserviceable parts shall be measured and paid seperately. | 2 | Job | |
| 171 | 171 | M & L Rewinding of burnt ceiling fan of 1200 / 1400mm sweep motor with supper enameled copper wire of suitable size as per details given below of any make, type, model incl transportation (inclusive of material & labour) complete all as specified and directed by Engineer -in-charge. | 2 | Each | |
| 172 | 172 | Supply only Sealed ball bearing suitable for ceiling fan of any size | 4 | Each | |
| 173 | 173 | Supply only Rubber bushes with MS clamp,bolt,nut and split pins | 2 | Each | |
| 174 | 174 | Supply only Fan condensor 2.5 mfd | 2 | Each | |
| 175 | 175 | Supply & replace Gi pipe 15mm dia medium grade downrod of 4 ft height | 2 | Each | |
| 176 | 176 | S&F Single pole and nuetral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed by Engineer-in-Charge | 2 | Each | |
| 177 | 177 | Supply & Fixing all metal vertical mounted Storage Water Heater 4 star rated powder-coated body with vacuum and pressure release valve and snap action thermostat, thermal cutout , non return devices, of capacity 25 ltrs,1.5 KW, 240 volts,with plug top, PVC connections for hot/cold water, confirming to IS:2082 complete all as specified and directed by Engineer-in-Charge. | 1 | Each | |
| 178 | 178 | Supply and laying steel water tubing, medium grade, galvanised of size 15 mm bore, ISI marked including all ISI marked fittings such as tees, bends elbow reducer, unions etc laid in trenches complete including cutting the existing pipe of any size all as specified and directed . | 24 | RM | |
| 179 | 179 | M & L for repairs to copper inner container like denting, soldering, brazing, leak testing and reassembling of any capacity water heater (Geyser) complete all as specified. | 1 | Each | |
| 180 | 180 | S & Fix modular ceiling fan regulator step type AC 240 volt suitable for 1200/1400 mm sweep. | 7 | Each | |
| 181 | 181 | S&F modular bell push button Single pole 230v | 2 | Each | |
| 182 | 182 | Supply and replace MCB DB double door TPN 4 Way with 200A rated busbar including 63A/100A 4 pole isolator incl removing the existing US one and making good the disturbed surface to match with the existing surface | 1 | Each |
AI Tender Summary
Tender Timeline
Jul 16, 2020
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 31, 2020
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 31, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 06, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender