Gauges For Aar H-Type Tight Lock Centre Buffer Coupler (Cbc) .-Odisha

Supply Of , Contour Condemning Limit Gauge (Jaw Gap Gauge) For Checking Cbc-H-Type Coupler, Similar To Apta Drawing/Gauge No- 34100-1. Ref. Rdso Specification No-Rdso/2011/Cg-03 Of Oct 2011. Material Tool Steel Is-3748/1990. Hardnes-50/55 Hrc. Supply With Calibration Certificate From Nabl/Govt. Approved Test Lab., Cbc Height Gauge Consisting Of Foldable Vertical Column With Measuring Scale And Pointer And Track Base. The Gauge Is Fitted With Spirit Level And Is Used To Measure The Height Of Cbc From Track Level Measuring Range 800Mm To 1150Mm. Accuracy-Plus Minus 1.0Mm. To Be Supplied In Carrying Box With Handle And Lock For Safety And Convenience. Calibration Certificate From Nabl Approved Test Lab., Contour Maintenance Gauge (Knuckle Profile Gauge) For Checking Cbc-H Type Coupler, Similar To Apta Drawing/Gauge No- 31000. Ref. Rdso Specification No-Rdso/2011/Cg-03 Of Oct 2011. Material Tool Steel Is-3748/1990. Hardnes-50/55 Hrc. Supply With Calibration Certificate From Nabl/Govt. Approved Test Lab., Knuckle Nose Wear And Stretch Limit Gauge For Checking Cbc-H-Type Coupler, Similar To Apta Drawing/Gauge No-34100-2A. Ref. Rdso Specification No. Rdso/2011/Cg-03 Of Oct 2011. Material Tool Steel Is-3748/1990. Hardnes-50/55 Hrc. Supply With Calibration Certificate From Nabl/Govt. Approved Test Lab., Aligning Wing Limit Gauge For Checking Cbc-H-Type Coupler, Similar To Apta Drawing/Gauge No- 32600. Ref. Rdso Specification No-Rdso/2011/Cg-03 Of Oct 2011. Material Tool Steel Is-3748/1990. Hardnes- 50/55 Hrc. Supply With Calibration Certificate From Nabl/Govt. Approved Test Lab., Vertical Height Aligning Wing Pocket & Guard Arm Gauge (Go Gauge-Must Pass) For Checking Cbc- H-Type Coupler, Similar To Apta Drawing/Gauge No- 34101-4. Ref. Rdso Specification No-Rdso/2011/Cg-03 Of Oct 2011.Material Tool Steel Is-3748/1990. Hardnes-50/55 Hrc. Supply With Calibration Certificate From Nabl/Govt. Approved Test Lab., Vertical Height Aligning Wing Pocket & Guard Arm Gauge (Nogo Gauge Must-Not-Pass) For Checking Cbc-H-Type Coupler, Similar To Apta Drawing/Gauge No-44250-5. Ref. Rdso Specification No- Rdso/2011/Cg-03 Of Oct 2011. Material Tool Steel: Is-3748/1990. Hardnes-50/55 Hrc. Supply With Calibration Certificate From Nabl/Govt. Approved Test Lab.

Refer document

Refer document