| 1 |
1 |
M&L for repair to leaking flanged joints of MS/GI pipe line of size 300mm bore by providing rubber or fiber board gasket properly in position for flanged ends pipes at any depth and replacing the unserviceable nut and bolts including necessary excavation and earth work in any type of soil, returning filling, bailing out water, cutting & welding wk where required of pipe complete all as specefied and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001132 |
20 |
Each\n Job |
| 2 |
2 |
Description all as per serial item No 1.00 here-in-before but 250 mm bore pipe. |
BI01010001010000000000000515BI0100001133 |
10 |
Each Job |
| 3 |
3 |
Description all as per serial item No 1.00 here-in-before but 200 mm bore pipe. |
BI01010001010000000000000515BI0100001134 |
10 |
Each Job |
| 4 |
4 |
M&L for repair to leaking spigot & socketed joints of CI/DI pipe line of size 450 mm bore by providing lead joints using fresh lead & spun yarn in position for spigot & socketed pipes at any depth and retrieving old lead including necessary excavation & earth work in any type of soil, returning filling ,bailing out water, cutting & welding where required of pipe complete all as specefied and directed by Engr-in-Charge.\nNote for item No 1.00 to 4.00: - \n(a) Contractor fully responsible for necessary excavation for jointing work required T&P equipment , JCB work and man power at site requirment with making good disturbed surfaces of road/walls/floor etc and matching with existing surface include quoted rate. \n(b) Required extra fittings/pipe will be measured and paid seprate. |
BI01010001010000000000000515BI0100001135 |
5 |
Each\n Job |
| 5 |
5 |
Description all as per serial item No 4.00 here-in-before but 300 mm bore pipe. |
BI01010001010000000000000515BI0100001136 |
20 |
Each\n Job |
| 6 |
6 |
Description all as per serial item No 4.00 here-in-before but 250 mm bore pipe. |
BI01010001010000000000000515BI0100001137 |
20 |
Each\n Job |
| 7 |
7 |
Description all as per serial item No 4.00 here-in-before but 200 mm bore pipe. |
BI01010001010000000000000515BI0100001138 |
15 |
Each\n Job |
| 8 |
8 |
M&L for cutting existing CI/DI/MS pipe of bore 450/300/250 mm and jointing with proper welding and testing of all fittings complete with all welding/threading works and jointing material laid in trenches/ on surface / slopes/ pillars/ culverts complete all as specefied and directed by Engr-in-Charge.\nNote:- Excavation, earthwork & fittings will be measured and paid separately. |
BI01010001010000000000000515BI0100001139 |
10 |
Each\n Job |
| 9 |
9 |
S&F in repair cast iron fittings for spigot and socket ends for pressure pipe for water mains such as bends, tapers tee pieces single branch, cross collar, caps and plugs suitable for 200 to 300 mm bore, all specifications as per IS-1538 (Pt-1 to 23)-1976 complete all as specefied and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001140 |
250 |
Kg |
| 10 |
10 |
Description all as per serial item No 9.00 here-in-before but upto 150mm bore. |
BI01010001010000000000000515BI0100001141 |
150 |
Kg |
| 11 |
11 |
M&L for run lead joints for CI/DI of spigot socketed ends pipes of size 300mm bore in position providing new lead ,using good quality spun yarn at any depth complete all as specefied and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001142 |
2 |
Each Job |
| 12 |
12 |
Description all as per serial item No 11.00 here-in-before but 250mm bore. |
BI01010001010000000000000515BI0100001143 |
2 |
Each Job |
| 13 |
13 |
Description all as per serial item No 11.00 here-in-before but 200mm bore. |
BI01010001010000000000000515BI0100001144 |
2 |
Each Job |
| 14 |
14 |
Description all as per serial item No 11.00 here-in-before but 150mm bore. |
BI01010001010000000000000515BI0100001145 |
2 |
Each Job |
| 15 |
15 |
Taking out old cracked/old unserviceable CI/DI/MS/GI pipe ,300 mm bore with all fittings after removing lead/tyton joints complete all as specefied and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001146 |
120 |
RM |
| 16 |
16 |
Supply, laying, jointing and testing ERW MS pipe class 'B' pipe 300 mm bore of thickness 6 mm with permissible tolerance + 10% confirming to IS-3589 with all fittings such as bends (any type, radius or angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc) TEE pieces single branch, 'Y' JUNCTION, double branch, cross collars, cap and plugs complete with all welding / threading works and jointing material laid in trenches/along road/ on surface/slopes/pillars/culverts/causways, (Excavation and earthwork will be measured and paid seperately) all as specified and directed. \nNote:- \n(i) All standard fittings such as bends, Tee pieces, collars, elbow, tail piece etc jointing are deemed to be included in the qouted item rate. \n(ii) Jointing of pipe line will be done through welding only. Payment of welding paid separately. |
BI01010001010000000000000515BI0100001147 |
120 |
RM |
| 17 |
17 |
M&L for circular welding of 300 mm ERW pipe at site including surface preparation and all necessary T&P required for welding at site with electric supply through generator set and welding at site including testing of joints after completion of the welding, complete all as specified. |
BI01010001010000000000000515BI0100001148 |
24 |
Each |
| 18 |
18 |
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes foundations of poles/stays/pipes etc .not exc 10 Sqm area on plan and getting out in soft/loose soil complete all as specified and directed by Engr-in-charge. |
BI01010001010000000000000515BI0100001149 |
56 |
Cum |
| 19 |
19 |
Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed by Engr-in-charge. |
BI01010001010000000000000515BI0100001150 |
49 |
Cum |
| 20 |
20 |
Removing of excavated soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge. |
BI01010001010000000000000515BI0100001151 |
7 |
Cum |
| 21 |
21 |
M&L for replacement of Cast Iron Non return valve, conforming to IS-5312, suitable for 300 mm bore pipe, heavy duty ,both end flanged of pressure rating PN 1.6 and jointing with rubber or fibre board gasket with nuts, bolts and washers, welding wk including taking down old unsv complete all as specified and directed by Engr-in-charge.\nMake: Kirloskar/LeaderL&T |
BI01010001010000000000000515BI0100001152 |
1 |
Each |
| 22 |
22 |
M&L for replacement of Cast Iron Non return valve, conforming to IS-5312, suitable for 250 mm bore pipe, heavy duty ,both end flanged of pressure rating PN 1.6 and jointing with rubber or fibre board gasket with nuts, bolts and washers, welding wk including taking down old unsv complete all as specified and directed by Engr-in-charge.\nMake: Kirloskar/Leader/L&T/Zoloto |
BI01010001010000000000000515BI0100001153 |
1 |
Each |
| 23 |
23 |
M&L for replacement of Cast Iron Non return valve, conforming to IS-5312, suitable for 200 mm bore pipe, heavy duty ,both end flanged of pressure rating PN 1.6 and jointing with rubber or fibre board gasket with nuts, bolts and washers, welding wk including taking down old unsv complete all as specified and directed by Engr-in-charge.\nMake: Kirloskar/Leader/L&T/Zoloto |
BI01010001010000000000000515BI0100001154 |
1 |
Each |
| 24 |
24 |
M&L for replacement of Cast Iron Non return valve, conforming to IS-5312, suitable for 150 mm bore pipe, heavy duty ,both end flanged of pressure rating PN 1.6 and jointing with rubber or fibre board gasket with nuts, bolts and washers, welding wk including taking down old unsv complete all as specified and directed by Engr-in-charge.\nMake: Kirloskar/Leader/L&T/Zoloto |
BI01010001010000000000000515BI0100001155 |
1 |
Each |
| 25 |
25 |
S&F in replacement Cast Iron sluice valve of size 300 mm (PN 1.6) (ISI Marked) with iron wheel head, both end flanged, stainless steel spindle, non rising type complete with Neoprene rubber gasket, nuts, bolts and washers, necessary welding wk etc.including taking down old unsv complete all as specified and directed by Engr-in-charge.\nMake: Kirloskar/Leader/L&T/Zoloto |
BI01010001010000000000000515BI0100001156 |
1 |
Each |
| 26 |
26 |
Description all as per serial item No 25.00 here-in-before but sluice valve of size 250 mm. |
BI01010001010000000000000515BI0100001157 |
1 |
Each |
| 27 |
27 |
Description all as per serial item No 25.00 here-in-before but sluice valve of size 200 mm. |
BI01010001010000000000000515BI0100001158 |
1 |
Each |
| 28 |
28 |
Description all as per serial item No 25.00 here-in-before but sluice valve of size 150 mm. |
BI01010001010000000000000515BI0100001159 |
2 |
Each |
| 29 |
29 |
Description all as per serial item No 25.00 here-in-before but sluice valve of size 100 mm. |
BI01010001010000000000000515BI0100001160 |
2 |
Each |
| 30 |
30 |
Description all as per serial item No 25.00 here-in-before but sluice valve of size 80 mm. |
BI01010001010000000000000515BI0100001161 |
2 |
Each |
| 31 |
31 |
S&F in replacement of CI foot valve flanged type 250 mm size with nut bolts and washer etc complete all as specified and directed by Engr-in-charge. |
BI01010001010000000000000515BI0100001162 |
1 |
Each |
| 32 |
32 |
S&F in replacement of CI foot valve flanged type 200 mm size with nut bolts and washer etc complete all as specified and directed by Engr-in-charge. |
BI01010001010000000000000515BI0100001163 |
1 |
Each |
| 33 |
33 |
S&F in replacement of CI foot valve flanged type 150 mm size with nut bolts and washer etc complete all as specified and directed by Engr-in-charge. |
BI01010001010000000000000515BI0100001164 |
1 |
Each |
| 34 |
34 |
M&L for replacement of cast iron air release valve of size 100mm dia with two air outlets including all jointing materials like high pressure rubber gasket, nuts, bolts, washers and for boring 150mm dia to 300mm dia pipe with arrangement for fixing complete all as specified and directed by Engr-in-charge. |
BI01010001010000000000000515BI0100001165 |
1 |
Each |
| 35 |
35 |
M&L for replacement of cast iron air release valve of size 80mm dia with two air outlets including all jointing materials like high pressure rubber gasket, nuts, bolts, washers and for boring 80mm dia to 150mm dia pipe with arrangement for fixing complete all as specified and directed by Engr-in-charge. |
BI01010001010000000000000515BI0100001166 |
1 |
Each |
| 36 |
36 |
M&L for cutting of existing road for crossing of underground MS/CI/DI/GI tubing of any size including necessary excavation and earth work, repairing/making goods the disturbed surfaces as per existing with pre mix bituminous carpet complete all as specified and directed . |
BI01010001010000000000000515BI0100001167 |
10 |
Sqm |
| 37 |
37 |
Decoupling, disconnecting suction line and discharge line taking down from foundation bolts, dismounting from base channels strip opening all parts, derusting, cleaning, overhualing comprising of repairs/replacement of unserviceable parts of pump sets. Reassembling of pump set mounting and fixing on base channel, recoupling of suction & discharge line realignment commissioning and testing in respect of centrifugal/multistage pump of capacity 200 to 270 HP complete all as specified and directed by Engr-in-charge.\nNotes: -\n(i) Loading/unloading & transportation charges shall be deemed included in the quoted rates.\n(ii) S&F of parts shall be measured and paid separately under respective item of sch A. |
BI01010001010000000000000515BI0100001168 |
5 |
Each Job |
| 38 |
38 |
Description all as per serial item No 37.00 here-in-before but capacity 170 HP. |
BI01010001010000000000000515BI0100001169 |
3 |
Each Job |
| 39 |
39 |
Description all as per serial item No 37.00 here-in-before but capacity 75/100 HP. |
BI01010001010000000000000515BI0100001170 |
4 |
Each Job |
| 40 |
40 |
Supply only Pump impeller made out of Bronze in repair for single/double/multistage pumps of capacity 200-270 HP as per manufacturer's composition of existing make of pump all as specified and directed by engr-in-Charge. \nMake: Kirloskar |
BI01010001010000000000000515BI0100001171 |
4 |
Each |
| 41 |
41 |
Description all as per serial item No 40.00 here-in-before but Pump shaft stainless steel shaft complete with check nut and keys |
BI01010001010000000000000515BI0100001172 |
3 |
Each |
| 42 |
42 |
Description all as per serial item No 40.00 here-in-before but Tyre coupling/star coupling |
BI01010001010000000000000515BI0100001173 |
6 |
Each |
| 43 |
43 |
Description all as per serial item No 40.00 here-in-before but Gland cup with nuts and bolts |
BI01010001010000000000000515BI0100001174 |
6 |
Each |
| 44 |
44 |
Description all as per serial item No 40.00 here-in-before but Shaft sleeves |
BI01010001010000000000000515BI0100001175 |
6 |
Each |
| 45 |
45 |
Description all as per serial item No 40.00 here-in-before but Welding remelting and turning finishing cutting of key ways in respect of pump shaft |
BI01010001010000000000000515BI0100001176 |
4 |
Each |
| 46 |
46 |
Description all as per serial item No 40.00 here-in-before but Bearing housing |
BI01010001010000000000000515BI0100001177 |
3 |
Each |
| 47 |
47 |
Supply only Pump impeller made out of Bronze in repair for single/double/multistage pump of capacity 170 HP as per manufacturer's composition of existing make of pump all as specified and directed by engr-in-Charge. \nMake: Kirloskar |
BI01010001010000000000000515BI0100001178 |
3 |
Each |
| 48 |
48 |
Description all as per serial item No 47.00 here-in-before but Pump shaft stainless steel shaft complete with check nut and keys |
BI01010001010000000000000515BI0100001179 |
2 |
Each |
| 49 |
49 |
Description all as per serial item No 47.00 here-in-before but Shaft sleeves |
BI01010001010000000000000515BI0100001180 |
2 |
Each |
| 50 |
50 |
Description all as per serial item No 47.00 here-in-before but Casing bearing |
BI01010001010000000000000515BI0100001181 |
2 |
Each |
| 51 |
51 |
Description all as per serial item No 47.00 here-in-before but Bearing housing |
BI01010001010000000000000515BI0100001182 |
2 |
Each |
| 52 |
52 |
Description all as per serial item No 47.00 here-in-before but Tyre coupling/star coupling |
BI01010001010000000000000515BI0100001183 |
6 |
Each |
| 53 |
53 |
Description all as per serial item No 47.00 here-in-before but Gland cup with nut and bolts |
BI01010001010000000000000515BI0100001184 |
3 |
Each |
| 54 |
54 |
Description all as per serial item No 47.00 here-in-before but Welding remelting and turning finishing cutting of key ways in respect of pump shaft |
BI01010001010000000000000515BI0100001185 |
2 |
Each |
| 55 |
55 |
Supply only Pump impeller made out of Bronze in repair for single/double/multistage stage pump of capacity 75/100 HP as per manufacturer's composition of existing make of pump complete all as specified and directed by Engr-in-charge.\nMake: Kirloskar |
BI01010001010000000000000515BI0100001186 |
4 |
Each |
| 56 |
56 |
Description all as per serial item No 55.00 here-in-before but Pump shaft stainless steel shaft complete with check nut and keys |
BI01010001010000000000000515BI0100001187 |
2 |
Each |
| 57 |
57 |
Description all as per serial item No 55.00 here-in-before but Shaft sleeves |
BI01010001010000000000000515BI0100001188 |
3 |
Each |
| 58 |
58 |
Description all as per serial item No 55.00 here-in-before but Casing bearing |
BI01010001010000000000000515BI0100001189 |
2 |
Each |
| 59 |
59 |
Description all as per serial item No 55.00 here-in-before but Bearing housing |
BI01010001010000000000000515BI0100001190 |
2 |
Each |
| 60 |
60 |
Description all as per serial item No 55.00 here-in-before but Tyre coupling/star coupling |
BI01010001010000000000000515BI0100001191 |
3 |
Each |
| 61 |
61 |
Description all as per serial item No 55.00 here-in-before but Gland cup with nut and bolts |
BI01010001010000000000000515BI0100001192 |
3 |
Each |
| 62 |
62 |
Description all as per serial item No 55.00 here-in-before but Welding remelting and turning finishing cutting of key ways in respect of pump shaft |
BI01010001010000000000000515BI0100001193 |
1 |
Each |
| 63 |
63 |
Disconnecting electric connection of 200-270 HP motor, removing the UNSV motor from existing place by unscrewing the foundation bolts and nuts decoupling from the pump, setting aside and transporting to workshop for repairs including dismantling the motor,cutting/taking out burnt winding of stator, rotor, cleaning the slots, transporting back after repair/winding & re-assembling the same. Cost of loading, unloading & transportation shall be deemed included in the quoted rates complete all as specified and directed by Engr-in-charge.\nNote: - Winding of motor stator & rotor shall be measured & paid separately.\n(a) Rewinding of motor will be measured and paid separately under relevent item\n(b) The motor shall be squirrel cage/slip ring induction motor.\n(c) The rates quoted shall be deemed to include the cost of loading/unloading, transportation, grease, nuts, bolts and washers of any size and shape as required at site and refixing of serviceable motor duly functional and testing complete at its existing location/position complete all as specified and directed.\n(d) Replacement of u/s bearings and grease completely. |
BI01010001010000000000000515BI0100001194 |
4 |
Each Job |
| 64 |
64 |
Description all as per serial item No 63.00 here-in-before but capacity 170 HP. |
BI01010001010000000000000515BI0100001195 |
3 |
Each Job |
| 65 |
65 |
Description all as per serial item No 63.00 here-in-before but capacity 75/100 HP. |
BI01010001010000000000000515BI0100001196 |
2 |
Each Job |
| 66 |
66 |
S&F in replacement of slipring made of copper suitable for as per existing model 200/250HP motor complete all as specified and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001197 |
2 |
Each Set |
| 67 |
67 |
S&F in replacement of slipring made of copper suitable for as per existing model 170HP motor complete all as specified and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001198 |
1 |
Each Set |
| 68 |
68 |
S&F in replacement of slipring made of copper suitable for as per existing model 75/100 HP motor complete all as specified and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001199 |
1 |
Each Set |
| 69 |
69 |
S&F in replacement of Microprocessor based Power card for soft starter of capacity 270/250HP motor,Model-ATS-22, \nMake: Schneider all as specified and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001200 |
2 |
Each |
| 70 |
70 |
Removing the burnt out winding from the rotor and stator, cleaning the slots, providing high quality of class'B' paper insulation inside the slots, rewinding the motor of various capacity with super enamel copper wire of same size and guage as per existing rapping up with high quality cotton tape and varnising with super quality oil including drying upto desired temperature and desired time complete all as specified and directed by Engr-in-Charge. \nNote: - Cost of labour for winding deemed to be included in the rate quoted. |
BI01010001010000000000000515BI0100001201 |
470 |
Kg |
| 71 |
71 |
S&F in repair of Pump bearing No. 6307 C3 \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001202 |
8 |
Each |
| 72 |
72 |
S&F in repair of Pump bearing No. 6313 M/C3 \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001203 |
8 |
Each |
| 73 |
73 |
S&F in repair of Pump bearing No. 6314 2RS1/C3 \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001204 |
7 |
Each |
| 74 |
74 |
S&F in repair of Pump bearing No. 6309 M/C3 \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001205 |
4 |
Each |
| 75 |
75 |
S&F in repair of Motor bearing No. 6310 M/C3 \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001206 |
4 |
Each |
| 76 |
76 |
S&F in repair of Motor bearing No. 6311 C3 \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001207 |
4 |
Each |
| 77 |
77 |
S&F in repair of Motor bearing No. 6312 C3 \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001208 |
4 |
Each |
| 78 |
78 |
S&F in repair of Motor bearing No. 6314 C4 \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001209 |
4 |
Each |
| 79 |
79 |
S&F in repair of Motor bearing No. 6011 C3 \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001210 |
4 |
Each |
| 80 |
80 |
S&F in repair of Motor bearing No. 7308 BECBJ \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001211 |
4 |
Each |
| 81 |
81 |
S&F in repair of Pump bearing No. 6408 C3 \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001212 |
8 |
Each |
| 82 |
82 |
S&F in repair of Pump bearing No. 22312 E \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001213 |
2 |
Each |
| 83 |
83 |
S&F in repair of Pump bearing No. 3307 ATN9 \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001214 |
4 |
Each |
| 84 |
84 |
S&F in repair of Pump bearing No. 7310 BECBJ \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001215 |
5 |
Each |
| 85 |
85 |
S&F in repair of Motor bearing No. 7311 BECBJ \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001216 |
6 |
Each |
| 86 |
86 |
S&F in repair of Motor bearing No. NU 304 ECP \nMake: SKF/NBC or equivalent |
BI01010001010000000000000515BI0100001217 |
4 |
Each |
| 87 |
87 |
Disconnecting the electric connection of Battery charger 12 volt 200AH,20Amps and tranportation civil workshop for repair. Rewinding of primary and secondary winding of battery charger complete with existing gauge of superior quality copper winding wire, insulating material,varnish binding of winding, replacement of Selector switch, Print circuit board complete all as specified and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001218 |
3 |
Each Job |
| 88 |
88 |
M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 95 sqmm inculding taking down existing old unserviceable cable complete all as specified and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001219 |
50 |
RM |
| 89 |
89 |
M&L in replacement of PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 150 sqmm inculding taking down existing old unserviceable cable complete all as specified and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001220 |
50 |
RM |
| 90 |
90 |
S&F in replacement of OFF load change over switch 400 Amps, 415 volts 4 pole side handle operated with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge. \nMake: Havells Cat part No.IHCFFE0400 or eqivalent make in Schneider/Legrand |
BI01010001010000000000000515BI0100001221 |
1 |
Each |
| 91 |
91 |
S&F in replacement of OFF load change over switch 800 Amps, 415 volts 4 pole side handle operated with stainless steel enclosure inculding taking down the old existing change over switch complete all as specified and directed by Engr-in-Charge. \nMake: Havells Cat part No.IHCFFE0800 or eqivalent make in Schneider/Legrand |
BI01010001010000000000000515BI0100001222 |
1 |
Each |
| 92 |
92 |
M&L for replacement of MCCB 400 Amps breaking capacity 36KA, 415 Volt, Ics 100 % of Icu 50 HZ conforming to IS-13947, 4 pole with adjustable thermal and fixed magnetic including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge. \nMake: Havells cat part No IHLLSEBF0400 or eqivalent make in Schneider/Legrand |
BI01010001010000000000000515BI0100001223 |
1 |
Each |
| 93 |
93 |
M&L for replacement of MCCB 400 Amps breaking capacity 36KA, 415 Volt, Ics 100 % of Icu 50 HZ conforming to IS-13947, 3 pole with adjustable thermal and fixed magnetic setting including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge.\nMake: Havells cat part No IHLLSEBT0400 or eqivalent make in Schneider/Legrand |
BI01010001010000000000000515BI0100001224 |
1 |
Each |
| 94 |
94 |
M&L for replacement of MCCB 630Amps breaking capacity 36 KA, 415 Volt, Ics 100% of Icu 50 HZ conforming to IS-13947, 3 pole with adjustable thermal and fixed magnetic setting including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge.\nMake: Havells cat part No IHLLSEBT0630 or eqivalent make in Schneider/Legrand |
BI01010001010000000000000515BI0100001225 |
1 |
Each |
| 95 |
95 |
M&L for replacement of MCCB 800 Amps breaking capacity 35/36 KA, 415 Volt, Ics 75% of Icu 50 HZ conforming to IS-13947, 4 pole with adjustable thermal and fixed magnetic setting including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge.\nMake: Havells cat part No IHLCNF0800 or eqivalent make in Schneider/Legrand |
BI01010001010000000000000515BI0100001226 |
1 |
Each |
| 96 |
96 |
S&F in replacement of power contactor 3 pole AC control conformance to IEC 60947-4-1, CE marking, current rating 115 Amp AC-3, suitable for 75 HP capacity complete all as specified and directed by Engr-in-Charge. \nMake: Havells cat part No IHPAA115100 or equivalent make in Schneider/Legrand |
BI01010001010000000000000515BI0100001227 |
1 |
Each Set |
| 97 |
97 |
S&F in replacement of power contactor 3 pole AC control conformance to IEC 60947-4-1, CE marking, current rating 265 Amp AC-3, suitable for 180 HP capacity complete all as specified and directed by Engr-in-Charge. \nMake: Havells cat part No IHPAA265300 or equivalent make in Schneider/Legrand |
BI01010001010000000000000515BI0100001228 |
1 |
Each Set |
| 98 |
98 |
S&F in replacement of power contactor 3 pole AC control conformance to IEC 60947-4-1, CE marking, current rating 400 Amp AC-3, suitable for 270 HP capacity complete all as specified and directed by Engr-in-Charge. \nMake: Havells cat part No IHPAA400500 or equivalent make in Schneider/Legrand |
BI01010001010000000000000515BI0100001229 |
1 |
Each Set |
| 99 |
99 |
S&F in replacement of Fully automatic star delta motor starter in sheet steel enclosure type MN 65 with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 75 HP as per cat part No IHPASDYF* complete all as specified and directed by Engr-in-Charge. \nMake: Havells complete all as specified and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001230 |
2 |
Each |
| 100 |
100 |
S&F in replacement of MS stud bolts of existing size with nuts suitable for pumps and motors of various capacity complete all as specified and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001231 |
35 |
Kg |
| 101 |
101 |
Repair to micro processor based power card, control card of soft starter of 250/270 HP motors complete all as specified and directed by Engr-in-Charge. \nMake: Schneider Model ATS 22 all as specified and as directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001232 |
5 |
Nos |
| 102 |
102 |
S&F in repair of 1KVA control transformer with output rating 220 volts for protection of soft starters against surges complete all as specified and directed by Engr-in-Charge. \nMake: SKC or equivalent as directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001233 |
10 |
Nos |
| 103 |
103 |
S&F of Lead for joints complete all as specified and directed by Engr-in-Charge. |
BI01010001010000000000000515BI0100001234 |
65 |
Kg |
