Construction Of Visitors Shed At District Jail Fatehpur

Tender Notice

24794433
Construction Of Visitors Shed At District Jail Fatehpur
Indian
Uttar Pradesh
03-07-2020
10-07-2020
10-07-2020

Tender Details

Construction Of Visitors Shed At District Jail Fatehpur , Excavation In Foundation In Ordinary Soil ( Loam Clay Or Sand ) Including Lift Upto 1 . 5M Lead Upto 30 . 0 M & Including Filling Watering And Ramming Of Excavated Earth Into The Space Between The Building & Sides Of Foundation Trenches , Sand Filling In Plinth Including Supply Of Necessary Quantity Of Sand From A Distance Not Exceeding 8 . 00Kms . From The Site Of Work Including Watering , Dressing Etc . Labour & T &P Etc . Required For Proper Completion Of Work Saplings Of Girth Upto 30 G , Painting On D . P . C . With Two Coats Of Airblown Bitumen 80/100 Or 85/25 @ 1 . 7Kg/Sq . M . Approx Including Cost Of Fuel If Any . , Providing And Laying Cement Concrete 1:4:8 ( 1Cement :4 Fine Sand :8 Graded Stone Ballast 40 Mm . Nominal Size ) Including Supply Of All Materials , Labour And T&P Etc . Required For Proper Completion Of The Work And Curing Complete , Also Including Cost Of Form Work Etc . , R . C . C . Work With Cement Approved Coarse Sand And 2Cm Gauge Approved Stone Ballast In The Proportion Of 1:1 . 5:3 In Raft Foundation Excluding Its Fixing And Binding Wire And Including Necessary Centering And Shuttering Etc And Also Including S/O All Materials Required For Proper Completion Of The Work . Binding Wire To Be Supplied By The Contractor Free Of Cost . 1:1 . 5:3 , R . C . C . Work With Cement Approved Coarse Sand And 2Cm Gauge Approved Stone Ballast In The Proportion Of 1:1 . 5:3 In Column . , Excluding Its Fixing And Binding Wire And Including Necessary Centering And Shuttering Etc And Also Including S/O All Materials Required For Proper Completion Of The Work . Binding Wire To Be Supplied By The Contractor Free Of Cost . But In Rcc Column In 1:1 . 5:3 , R . C . C . Work With Cement Approved Coarse Sand And 2Cm Gauge Approved Stone Ballast In The Proportion Of 1:1 . 5:3 In Plinth Beams , Excluding Its Fixing And Binding Wire And Including Necessary Centering And Shuttering Etc And Also Including S/O All Materials , R . C . C . Work With Cement Approved Coarse Sand And 2Cm Gauge Approved Stone Ballast In The Proportion Of 1:1 . 5:3 In Lintel Of Door , Excluding Its Fixing And Binding Wire And Including Necessary Centering And Shuttering Etc And Also Including S/O All Materials , R . C . C . Work With Cement Approved Coarse Sand And 2Cm Gauge Approved Stone Ballast In The Proportion Of 1:1 . 5:3 In Slab , Excluding Its Fixing And Binding Wire And Including Necessary Centering And Shuttering Etc And Also Including S/O All Materials , Mild Steel Or Iron In Plain Work Such As In Reinforced Concreted Or Reinforced Brick Work ( When Not Included In Overall Rates ) Wrought To Required Shape As Necessary Including Bending For Proper Completion Of The Work And Including Supply Of Steel Its Was , M-150 Brick Work In 1:6 Cement And C Sand Mortar In Foundation And Plinth Including Supply Of All Materials , Labour And Tools And Plants Etc Required For Proper Completion Of Work . , M-150 Brick Work In 1:6 Cement And Sand Mortar In Super Structure Including Necessary Cutting And Moulding Of Bricks Required And Also Including Honey Comb Brick Work Thickness Of Walls More Than One Brick And For Extra Labour To Above Items , Class 150 Brick Work In But In 1 : 4 Cement & Coarse Sand Mortar For Wall Thickness 12 Cm . And Below , Upto Two Floors , Proving & Injecting Chamical Emulsion For Preconstructional Anti-Termite Treatment And Creating A Chemical Barrier Under & Alround The Column Pits Wall Trenches Basement Excavation Top Surface If Plinth Filling Junction Of Wall & Floor Along The External ( Vi ) Treatment Of Soil Under Apron Along External Perimeter 5Litres/Sqm , Mildsteel Of Iron Workof Small Sizes And Sections Such As Holding Down Bolts , Hold Fast Tie Rods , Gratings Etc . ( When Not Included In An Overall Rates ) Wrought To Required From Including Supply Of Steel And Its Wastage Including Cost Of Bolts , Nuts If Requ Angle Iron Door Chaukhat 40X40x6 Mm , Mildsteel Of Iron Workof Small Sizes And Sections Such As Holding Down Bolts , Hold Fast Tie Rods , Gratings Etc . ( When Not Included In An Overall Rates ) Wrought To Required From Including Supply Of Steel And Its Wastage Including Cost Of Bolts , Nuts If Requ Fabricated Z-Section Window & Ventilator , Mildsteel Of Iron Workof Small Sizes And Sections Such As Holding Down Bolts , Hold Fast Tie Rods , Gratings Etc . ( When Not Included In An Overall Rates ) Wrought To Required From Including Supply Of Steel And Its Wastage Including Cost Of Bolts , Nuts If Requ Fabrication Of Grill , S/F Of Flush Door Commercial Qualityconforming To Is-2202 Part 1 Including S/Fof Wooden Plates Stopers Hinge , Bolts , Handle , Spring & Other Fittings & Includingpainting With Two Coats Complete . ( A ) ( 32 Mm Thick ) Single Leaf Single Leaf , S/F Of Flush Door Commercial Qualityconforming To Is-2202 Part 1 Including S/Fof Wooden Plates Stopers Hinge , Bolts , Handle , Spring & Other Fittings & Includingpainting With Two Coats Complete . ( A ) ( 32 Mm Thick ) Single Leaf Double Leaf , Mild Steel Or Iron Work In Plain Work In Purlins And Rafters Including Drilling Holes And Fixing In Postion And Including Supply Of All Steel , Bolts And Nut , Wastage , Labour And T&P Etc . Required For Proper Completion Of The Work . Tuss Detail , Providing And Fixing Precoated Galvanised Iron Profile Sheets ( Size , Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0 . 50 Mm ( + 0 . 05 % ) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277 , In 240 Mpa Steel Grade , 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns . Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Ength Upto 12 Metre Or As Desired By Engineer-In-Charge . The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size ( 5 . 5X 55 Mm ) With Epdm Seal , Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces , Excluding The Cost Of Purlins , Rafters And Trusses And Including Cutting To Size And Shape Wherever Required . Profile Seat , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0 . 50 Mm ( +0 . 05 % ) Total Coated Thickness , Zinc Coating 120 Grams Per Sqm As Per Is: 277 , In 240 Mpa Steel Grade , 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Omplete : Ridges Plain ( 500 - 600Mm ) , Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm ( Thickness To Be Specified By The Manufacturer ) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White , Ivory , Grey , Fume Red Brown , Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Pointing The Joints With White Cement And Matching Pigment Etc . , Complete , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is:15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make , In All Colours , Shades Except Burgundy , Bottle Green , Black Of Any Size As Approved By Engineer-In-Charge , In Skirting , Risers Of Steps And Dados , Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) , Laying Of 20 Mm Thick Kota Stone Of Size 45X45 Cm And Above Flooring Over Previously Prepared Base With 2Cm Thick 1:4 Cement And Sand Mortar Including Filling Of Joints With Cement Mixed With Pigment Required For Matching The Shade Of Floor As Per Direction Of E/I Including Cutting Polishing With Wax Polish Including Supply Of All Materials T&P Etc . , Laying Of 20Mm Thick Kota Stone Of Size 45X45 Cm And Above Flooring Over Previously Prepared Base With 2Cm Thick 1:4 Cement And Sand Mortar Including Fillin

Key Value

Document Fees
INR 2360 /-
EMD
INR 39000.00 /-
Tender Value
INR 19.55 Lakhs /-

BOQ Items

Name of Work: CONSTRUCTION OF VISITORS SHED AT DISTRICT JAIL FATEHPUR
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches BI01010001010000000000000515BI0100001113 80.032 Cum.
2 2 Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8.00Kms. From the site of work including watering, dressing etc. labour & T &P etc. required for proper completion of work saplings of girth upto 30 g BI01010001010000000000000515BI0100001114 11.69 Cum.
3 3 Painting on D.P.C. with two coats of airblown bitumen 80/100 or 85/25 @ 1.7kg/Sq. M. approx including cost of fuel if any. BI01010001010000000000000515BI0100001115 16.44 Sqm
4 4 Providing and laying Cement concrete 1:4:8 (1cement :4 fine sand :8 graded stone ballast 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost of form work etc. BI01010001010000000000000515BI0100001116 19.295 Cum.
5 5 R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in Raft foundation Excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. 1:1.5:3 BI01010001010000000000000515BI0100001117 4.855 Cum.
6 6 R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in column., excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost. But in RCC column in 1:1.5:3 BI01010001010000000000000515BI0100001118 2.844 Cum.
7 7 R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in plinth beams, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials BI01010001010000000000000515BI0100001119 4.312 Cum.
8 8 R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in lintel of door, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials BI01010001010000000000000515BI0100001120 7.114 Cum.
9 9 R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:1.5:3 in Slab, excluding its fixing and binding wire and including necessary centering and shuttering etc and also including S/o all materials BI01010001010000000000000515BI0100001121 3.142 Cum.
10 10 Mild steel or iron in plain work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its was BI01010001010000000000000515BI0100001122 17.97 qtl.
11 11 M-150 brick work in 1:6 cement and c sand mortar in foundation and plinth including supply of all materials, labour and tools and plants etc required for proper completion of work. BI01010001010000000000000515BI0100001123 25.556 Cum.
12 12 M-150 brick work in 1:6 cement and sand mortar in super structure including necessary cutting and moulding of bricks required and also including honey comb brick work thickness of walls more than one brick and for extra labour to above items BI01010001010000000000000515BI0100001124 38.38 Cum
13 13 Class 150 brick work in but in 1 : 4 cement & coarse sand mortar for wall thickness 12 cm. and below, upto two floors BI01010001010000000000000515BI0100001125 0.932 Cum.
14 14 Proving & injecting chamical emulsion for preconstructional anti-termite treatment and creating a chemical barrier under & alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall & floor along the external (VI) Treatment of soil under Apron along external perimeter 5litres/sqm BI01010001010000000000000515BI0100001126 128.331 Sqm
15 15 Mildsteel of iron workof small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc.(when not included in an overall rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if requ Angle iron Door Chaukhat 40x40x6 mm BI01010001010000000000000515BI0100001127 91.889 Kg
16 16 Mildsteel of iron workof small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc.(when not included in an overall rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if requ Fabricated Z-Section window & ventilator BI01010001010000000000000515BI0100001128 421.2 Kg
17 17 Mildsteel of iron workof small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc.(when not included in an overall rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if requ Fabrication of Grill BI01010001010000000000000515BI0100001129 421.2 kg.
18 18 S/F of flush door commercial qualityconforming to IS-2202 part 1 including S/Fof wooden plates stopers hinge, bolts,handle, spring & other fittings & includingpainting with two coats complete.(a) (32 mm thick) Single leaf Single Leaf BI01010001010000000000000515BI0100001130 4.725 Sqm
19 19 S/F of flush door commercial qualityconforming to IS-2202 part 1 including S/Fof wooden plates stopers hinge, bolts,handle, spring & other fittings & includingpainting with two coats complete.(a) (32 mm thick) Single leaf Double Leaf BI01010001010000000000000515BI0100001131 5.04 Sqm
20 20 Mild steel or iron work in plain work in purlins and rafters including drilling holes and fixing in postion and including supply of all steel,bolts and nut,wastage,labour and T&P etc. Required for proper completion of the work. Tuss Detail BI01010001010000000000000515BI0100001132 1862.39 Kg
21 21 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single ength upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.Profile Seat BI01010001010000000000000515BI0100001133 135.108 Sqm
22 22 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277,in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws omplete : Ridges plain (500 - 600mm) BI01010001010000000000000515BI0100001134 13.13 RM
23 23 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming\nto IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4\nCoarse sand), including pointing the joints with white cement and matching pigment etc., complete BI01010001010000000000000515BI0100001135 9.81 Sqm
24 24 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge,in skirting, risers of steps and dados, over 12 mm thick bed of cement\nmortar 1:3 (1 cement : 3 coarse sand) BI01010001010000000000000515BI0100001136 24.99 Sqm
25 25 Laying of 20 mm thick Kota stone of size 45x45 cm and above flooring over previously prepared base with 2cm thick 1:4 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per direction of E/I including cutting polishing with wax polish including supply of all materials T&P etc. BI01010001010000000000000515BI0100001137 113.171 Sqm
26 26 Laying of 20mm thick Kota stone of size 45x45 cm and above flooring over previously prepared base with 2cm thick 1:4 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per direction of E/I including cutting polishing with wax polish including supply of all materials T&P etc. BI01010001010000000000000515BI0100001138 5.442 Sqm
27 27 Providing and laying flamed finish Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawing with 18 mm thick stone slab over 20 mm (av) thick base of cement mortor 1:4 (1 cement : 4 course sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curring and polishing etc all complete as specified and as directed by the Engineer-in-charge a. Flamed finished granite stone slab Jet Black,Cherry Red,Elite Brown,Cat Eye or equivalent. BI01010001010000000000000515BI0100001139 26.28 Sqm
28 28 12mm cement plaster in single coat on fair side of single or half brick wall for single or half brick wall for interior plastering upto floor two level including brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (iii) 1 cement: 6 fine sand BI01010001010000000000000515BI0100001140 159.495 Sqm
29 29 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles not exceeding 80mm in girth and finished even and smooth (iii) 1 cement: 6 fine sand BI01010001010000000000000515BI0100001141 239.132 Sqm
30 30 20 mm cement plaster of mix : 1:3 (1 cement: 3 coarse sand) with a floating coat of neat cement for below plinth level BI01010001010000000000000515BI0100001142 49.457 Sqm
31 31 40mm thick Cement concrete floor 1:2:4 (1cement :2coarse sand :4 graded stone aggregate20mm nominal size) laid in one layerfinished witha floating coats of neat cement) Apron BI01010001010000000000000515BI0100001143 45.774 Sqm
32 32 Supply of glass strips for flooring . 40 mm wide & 4mm thick BI01010001010000000000000515BI0100001144 137.321 Rmt
33 33 Fixing Panes of glass with equal or equivalent ISI marked quantity putty brand and springs and i/c supply of all materials and labour etc complete 4mm BI01010001010000000000000515BI0100001145 23.4 Sqm
34 34 Painting two coats over priming coat on Wooden surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surf BI01010001010000000000000515BI0100001146 21.971 Sqm
35 35 Painting two coats over priming coat on steel & other metal surfaces up to 10 cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surf BI01010001010000000000000515BI0100001147 46.8 Sqm
36 36 Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives of required dhade.New work (Two or more coat applied @ 1.43 ltr/10 Sqm. Over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) BI01010001010000000000000515BI0100001148 159.495 Sqm
37 37 Distemper with oilbound distemter of approved brand two coat and of required shade on undecorated wall surface to give an even shade over &incuding primer coat of whiting after thoroughy brushing the surface free from droping mstter including preparing the surface even &sand parpered smouth BI01010001010000000000000515BI0100001149 259.38 Sqm
38 38 Applying one coat of cement primer of approved brand on wall surface and finishing wall with Acrylic Smooth exterior paint BI01010001010000000000000515BI0100001150 418.875 Sqm
39 39 Making grooves 10 to 12 mm wide*8 mm deep in plasterof the wall or in celing vertically or horzonatally as required BI01010001010000000000000515BI0100001151 194.88 Rmt
40 40 P/F Alumi. Slinding door bolts 300 mm long BI01010001010000000000000515BI0100001152 7 Nos
41 41 P/F Alumi. Tower bolts 300 mm long. BI01010001010000000000000515BI0100001153 7 Nos
42 42 P/F Alumi. Handles 150 mm long BI01010001010000000000000515BI0100001154 14 Nos
43 43 TOTAL COST OF CIVIL WORKS BI01010001010000000000000515BI0100001155
44 44 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever)\nconforming to IS : 7231, White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests BI01010001010000000000000515BI0100001156 2 each
45 45 Providing and fixing white vitreous china flat back half stall urinal of size 430X260X350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fit One urinal basin with 5 litre P.V.C. automatic flushing cistern BI01010001010000000000000515BI0100001157 2 each
46 46 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap BI01010001010000000000000515BI0100001158 2 each
47 47 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia\n BI01010001010000000000000515BI0100001159 2 each
48 48 Providing and fixing soil, waste and vent pipes : Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989\n BI01010001010000000000000515BI0100001160 10 RM
49 49 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), For 100 mm dia pipe\n\n\n BI01010001010000000000000515BI0100001161 2 each
50 50 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm dia Sand cast iron S&S as per IS - 1729\n BI01010001010000000000000515BI0100001162 1 each
51 51 Providing and fixing plain bend of required degree.100mm Sand cast iron S&S as per IS - 1729 BI01010001010000000000000515BI0100001163 4 each
52 52 Providing and fixing collar 100mm Sand cast iron S&S as per IS - 3989 BI01010001010000000000000515BI0100001164 4 each
53 53 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :100mm dia\n BI01010001010000000000000515BI0100001165 10 each
54 54 Providing and placing on terrace (at allfloor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings BI01010001010000000000000515BI0100001166 500 Ltr
55 55 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore\n BI01010001010000000000000515BI0100001167 2 each
56 56 Providing and fixing PTMT grating of approved quality and colour Circular type 125 mm nominal dia with 25 mm waste hole BI01010001010000000000000515BI0100001168 4 each
57 57 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of Internal work - Exposed on wall 20 mm nominal outer dia Pipes BI01010001010000000000000515BI0100001169 3 RM
58 58 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes BI01010001010000000000000515BI0100001170 20 RM
59 59 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes BI01010001010000000000000515BI0100001171 10 RM
60 60 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes Concealed work, including cutting chases and making good the walls etc. 20 mm nominal bore BI01010001010000000000000515BI0100001172 10 each
61 61 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes Concealed work, including cutting chases and making good the walls etc. 25 mm nominal bore BI01010001010000000000000515BI0100001173 10 each
62 62 Providing and fixing brass bib cock of approved quality (a) 15 mm nominal bore BI01010001010000000000000515BI0100001174 6 each
63 63 Providing and fixing brass STOP cock of approved quality (a) 15 mm nominal bore BI01010001010000000000000515BI0100001175 2 each
64 64 Excavating trenches in all kind of soil ofrequired width for pipes, cables etc.including excavation for sockets anddressing of sides, ramming of bottoms,depth upto 1.5 m. including getting outthe excavated soil & then returning thesoil as required, in layers not exceeding20cm in depth including consolidatingeach deposited layer by ramming,watering, etc & disposig of surplusexcavated soil as directed within a lead of50m. a) Pipes 80mm to 300mm diameter. BI01010001010000000000000515BI0100001176 5 Rmt
65 65 Providing, laying and joining glazedstone ware pipes grade 'A' with stiffmixture of cement mortar in the proportionof 1:1 (1 cement : 1 fine sand) includingtesting of joints etc. complete. a) 100mm diameter BI01010001010000000000000515BI0100001177 5 Rmt
66 66 Providing,laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 gradedstone aggregate 40mm nominal size)alround S.W. Pipes including bedconcrete as per standard design. a) 100mm diameter S.W. Pipe BI01010001010000000000000515BI0100001178 5 Rmt
67 67 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 brick ballast) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 BI01010001010000000000000515BI0100001179 1 each
68 68 Soak Pit BI01010001010000000000000515BI0100001180
69 69 Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth BI01010001010000000000000515BI0100001181 4.7 Cum
70 70 Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone aggregate 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete. BI01010001010000000000000515BI0100001182 0.221 Cum
71 71 Class 150 brick work in 1 : 6 cement & coarse sand mortar in foundation & plinth including supply of all materials labour & tools and plants etc. required for proper completion of the work. BI01010001010000000000000515BI0100001183 2.91 Cum
72 72 R.C.C. work with cement , c.sand & 2 cm gauge approved S. B. in the proportion 1:1.5:3 ( 1cement: 1.5 c.sand :3 agg. 20mm normal size ) for slabs BI01010001010000000000000515BI0100001184 0.362 Cum
73 73 Mild steel or iron in plain work such as reinforcement concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel BI01010001010000000000000515BI0100001185 0.28 Qtl
74 74 Providing & Filling of O.B. brick ballast 25 mm to 40 mm size inside of upper layer in soak pit. BI01010001010000000000000515BI0100001186 1.902 Cum
75 75 Septic Tank BI01010001010000000000000515BI0100001187
76 76 Excavation in foundation in ordinary Soil ( Loam clay or sand ) including lift upto 1.5m lead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth BI01010001010000000000000515BI0100001188 10.851 Cum
77 77 Providing and laying Cement concrete 1:4:8 (1cement :4 coarse sand :8 graded stone aggregate 40 mm. nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete, also including cost o BI01010001010000000000000515BI0100001189 0.678 Cum
78 78 Class 150 brick work in 1 : 6 cement & coarse sand mortar in foundation & plinth including supply of all materials labour & tools and plants etc. required for proper completion of the work. BI01010001010000000000000515BI0100001190 3.566 Cum
79 79 Cement concrete flooring 1:2:4 (1 cement:2 coarse sand : 4 graded stone of size 20mm nominal size) laid in one layer finished with floating coat of neat cement (40 mm thick floor) BI01010001010000000000000515BI0100001191 4.5 Sqm
80 80 R.C.C. work with cement , c.sand & 2 cm gauge approved S. B. in the proportion 1:1.5:3( 1 cement:1.5 c.sand :3 agg. 20mm normal size ) in beams . BI01010001010000000000000515BI0100001192 0.05 Cum
81 81 R.C.C. work with cement , c.sand & 2 cm gauge approved S. B. in the proportion 1:1.5:3( 1 cement: 1.5 c.sand :3 agg. 20mm normal size ) for slabs BI01010001010000000000000515BI0100001193 0.81 Cum
82 82 Mild steel or iron in plain work such as reinforcement concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and BI01010001010000000000000515BI0100001194 0.68 Qtl
83 83 15mm thick cement plaster with cement mortar in proportion of 1:3 cement & coarse sand BI01010001010000000000000515BI0100001195 15.9 Sqm
84 84 Foot Step (2 kg/sqm.) BI01010001010000000000000515BI0100001196 8 Kg
85 85 C.I. Pipe (50 mm dia) BI01010001010000000000000515BI0100001197 2 Rmt
86 86 C.I.cowel. BI01010001010000000000000515BI0100001198 1 Nos
87 87 M.H. cover of size 455x610 mm. with frame BI01010001010000000000000515BI0100001199 1 Nos
88 88 Electrical work BI01010001010000000000000515BI0100001200
89 89 Wiring point for light with 1.5 Sq mm PVC insulated multi standed single core copper conductor in heavy guage MS conduit concealed in wall. BI01010001010000000000000515BI0100001201 12 each
90 90 Wiring point for fan with 1.5 Sq mm PVC insulated multi standed single core copper conductor in heavy guage MS conduit concealed in wall. BI01010001010000000000000515BI0100001202 11 each
91 91 Supply and wiring of submain with 2 Nos 2.5 Sq mm FR PVC insulated multistand single core copper conductor in steel conduit. BI01010001010000000000000515BI0100001203 75 rmt
92 92 Same as above but 2x6 Sqmm BI01010001010000000000000515BI0100001204 15 rmt
93 93 Same as above but 2x10 Sqmm BI01010001010000000000000515BI0100001205 15 rmt
94 94 S/F of 6 to 8 W LED Light BI01010001010000000000000515BI0100001206 12 each
95 95 S/F of batten holder BI01010001010000000000000515BI0100001207 15 each
96 96 S/L under ground cable 10Sqmmx 2c BI01010001010000000000000515BI0100001208 15 rmt
97 97 S/L under ground cable 16Sqmmx 4c BI01010001010000000000000515BI0100001209 10 rmt
98 98 S/F of Al Lugs 10 Sqmm BI01010001010000000000000515BI0100001210 10 ecah
99 99 S/F of Al Lugs 16 Sqmm BI01010001010000000000000515BI0100001211 10 ecah
100 100 S/ burrying of GI earth plate 600x600 mm BI01010001010000000000000515BI0100001212 1 rmt
101 101 S/ laying of GI strip 25mmx3mm BI01010001010000000000000515BI0100001213 1 each
102 102 S/ fixing of testing joint in GI strip BI01010001010000000000000515BI0100001214 1 each
103 103 S/F of flush mounting SPM DB 4 way BI01010001010000000000000515BI0100001215 4 each
104 104 Supply and fixing of 240 volts 'L' series miniature circuit breaker in existing MCB, DB complete with connections as required.a) 5 - 32 amps. BI01010001010000000000000515BI0100001216 6 Nos
105 105 Supply and fixing 25 Amp. TPN miniature circuit breakers in existing MCB, DB complete in all respects as required. BI01010001010000000000000515BI0100001217 2 Nos
106 106 S/F Ceiling fan BI01010001010000000000000515BI0100001218 9 each
107 107 S/F Exhaust fan BI01010001010000000000000515BI0100001219 2 each
108 108 Summersable Pump BI01010001010000000000000515BI0100001220
109 109 Supply & assembling,Lowering 200mm PVC casing pipe of ISI mark BI01010001010000000000000515BI0100001221 60 Mt.
110 110 P/F 50 MM GI pipe (B) class BI01010001010000000000000515BI0100001222 50 Mt.
111 111 Nylon mesh for filter. BI01010001010000000000000515BI0100001223 1 Roll
112 112 Plastic dori BI01010001010000000000000515BI0100001224 1 Roll
113 113 200 mm End cap BI01010001010000000000000515BI0100001225 1 No.
114 114 200 mm Submersible cap BI01010001010000000000000515BI0100001226 1 No.
115 115 50 mm MS Clamp(Heavy) BI01010001010000000000000515BI0100001227 1 Pair
116 116 50mm GI elbow BI01010001010000000000000515BI0100001228 1 No.
117 117 50x150 mm GI nipple BI01010001010000000000000515BI0100001229 1 No.
118 118 2HP 9m stage submersible pump of ISI mark with automatic panel BI01010001010000000000000515BI0100001230 1 No.
119 119 4.00 sqm Sumersible cable BI01010001010000000000000515BI0100001231 60 Mt.
120 120 Drilling charges for 400 mm dia tubewell BI01010001010000000000000515BI0100001232 60 Mt.
121 121 Pea Gravel. DSR-2018,Item No. 24.8 BI01010001010000000000000515BI0100001233 2 CM
122 122 Rope with plastic coated BI01010001010000000000000515BI0100001234 60 Mt.
123 123 cartage of material upto site. BI01010001010000000000000515BI0100001235 1 Job
124 124 GST extra as applicable BI01010001010000000000000515BI0100001236
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail