Construction Of Administrative Building In Tssdc Premises At Nandipahad Village, Miryalaguda, Nalgonda District.
Tender Value
52.50 Lakhs
Estimated cost
Bid Submission
14 Jul 2020
0 days left
EMD
52506
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
NALGONDA → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Administrative Building In Tssdc Premises At Nandipahad Village, Miryalaguda, Nalgonda District.
BOQ
| S.No | Subwork Name | Specification Number | Quantity | UOM | Rate(INR) | Amount(INR) |
|---|---|---|---|---|---|---|
| 1 | AS PER TENDER DOCUMENT | As per tender document | 2.00 | No | 192.05 | 384.00 |
| Supply of 20mm PPR Ball Valve conforming to DINStandards 8077/8092 Supply and fixing of Ashirvad/Ajay/Astral Flowgaurd or equivalent 20mm PPR Ball Valve conforming to DINStandards 8077/8092 to meet the requirement of ASTM-D 2846 and are produced in CTS( copper tube sizes 1/4\" to 2\" ) ashirwad flowgaurd SDR11 and SDR 13.5 pipes are made from identical CPVC components having the same physical properties for Hot and cold Water confirming to (IS 15778-2007) | ||||||
| 2 | AS PER TENDER DOCUMENT | As per tender document | 45.40 | Rmt | 146.60 | 6656.00 |
| Supply and fixing of Ashirvad/Ajay/Astral Flowgaurd or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS( copper tube sizes 1/4\" to 2\" ) ashirwad flowgaurd SDR11 and SDR 13.5 pipes are made from identical CPVC components having the same physical properties for Hot and cold Water confirming to (IS 15778-2007) (15.9 mm OD pipe SDR 13.5) | ||||||
| 3 | AS PER TENDER DOCUMENT | As per tender document | 41.50 | Rmt | 167.05 | 6933.00 |
| Supply and fixing of Ashirvad/Ajay/Astral Flowgaurd or equivalent CPVC pipes and fittings to meet the requirement of ASTM-D 2846 and are produced in CTS( copper tube sizes 1/4\" to 2\" ) ashirwad flowgaurd SDR11 and SDR 13.5 pipes are made from identical CPVC components having the same physical properties for Hot and cold Water confirming to (IS 15778-2007) (22.2 mm OD pipe SDR 13.5) | ||||||
| 4 | AS PER TENDER DOCUMENT | As per tender document | 4.00 | Nos | 170.45 | 682.00 |
| Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges etc., complete for finished item of work. | ||||||
| 5 | AS PER TENDER DOCUMENT | As per tender document | 4.00 | Nos | 531.75 | 2127.00 |
| Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors. | ||||||
| 6 | AS PER TENDER DOCUMENT | As per tender document | 4.00 | Nos | 610.80 | 2443.00 |
| Supplying and fixing CP finish brass soap dish of approved make ISI quality with NP screws etc., complete including cost and conveyance of all materials, labour charges for fixing etc., complete for finished item of work in all floors as per ssr item no 598. | ||||||
| 7 | AS PER TENDER DOCUMENT | As per tender document | 8.00 | Nos | 162.00 | 1296.00 |
| Supplying and fixing of 4\" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work. | ||||||
| 8 | AS PER TENDER DOCUMENT | As per tender document | 4.00 | Nos | 850.55 | 3402.00 |
| S&F of 15 mm 15 mm brass body CP finish pillar tap of not less than 500 grams weight quarter turn spindle conforming to IS 8931 | ||||||
| 9 | AS PER TENDER DOCUMENT | As per tender document | 4.00 | Nos | 1446.00 | 5784.00 |
| S&F of 15 mm CP finish brass body health faucet gun with Stainless steel flexible hose 1.0 m long with brass nuts conforming to IS 8931 | ||||||
| 10 | AS PER TENDER DOCUMENT | As per tender document | 4.00 | Nos | 898.25 | 3593.00 |
| S&F of 15 mm brass body CP finish two way bib tap of not less than 400 grams weight with quarter turn spindle internal/ external threaded connection conforming to IS 8931 | ||||||
| 11 | AS PER TENDER DOCUMENT | As per tender document | 4.00 | Nos | 6279.73 | 25119.00 |
| Supply, Installation and commissioning approved make floor mounted Anglo Indian wash down EWC conforming to IS:2556 (Part 8)-2004 suit with \P\ or\S\ trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. completeforfinisheditemofwork in all respects: WhiteColour | ||||||
| 12 | AS PER TENDER DOCUMENT | As per tender document | 4.00 | Nos | 2836.35 | 11345.00 |
| Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Esso or equivalent complete with standard CI brackets including wooden block ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 300 gms Seiko or equivalent including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work | ||||||
| 13 | AS PER TENDER DOCUMENT | As per tender document | 1.00 | No | 703.70 | 704.00 |
| Supplying and fixing 150.00mmx100.00mm SWG gully trap 1st class confirming to ISI 651 & 4127 with CI grating and constructing single brick masonry wall chamber of size 20\" x 14\" x 12? in CM (1:6) prop. Over a CC (1:5:10)prop. bed, and fitted with 304.8 mm x 225.6 mm(12\" x 9\") CI frame and hinged cover and plastering 12mm thk. in CM (1:4) prop. both inside and outside surfaces and including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work. SSR ITEM NO.527 | ||||||
| 14 | AS PER TENDER DOCUMENT | As per tender document | 30.00 | Rmt | 1132.07 | 33962.00 |
| Supplying and laying, filling, jointing and testing Double Socket PVC/SWR pipe - 6 Kg/sq.cm of ISI make confirming to IS 1651 & 4127 1st quality with air tight joints including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping including cost and conveyance of all materials to site and all labour charges for finished item of work (APSS NO 1301 & 1318) (110mm dia pipe) | ||||||
| 15 | AS PER TENDER DOCUMENT | As per tender document | 30.00 | Rmt | 637.83 | 19135.00 |
| Supplying and laying, filling, jointing and testing Double Socket PVC/SWR pipe - 6 Kg/sq.cm of ISI make confirming to IS 1651 & 4127 1st quality with air tight joints including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping including cost and conveyance of all materials to site and all labour charges for finished item of work (APSS NO 1301 & 1318) (75mm dia pipe) | ||||||
| 16 | AS PER TENDER DOCUMENT | As per tender document | 8.00 | Nos | 4353.75 | 34830.00 |
| Constructing 457.2mm x 457.2mm (1\-6\" x 1\-6\") brick in CM (1:6) prop. Masonry inspection chamber upto 914.4mm (3\-0\") and fitted with light weight 457.2mm x 457.2mm (1\-6\" x 1\"-6\") frame and cover of 20kg., including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work | ||||||
| 17 | AS PER TENDER DOCUMENT | As per tender document | 34.50 | Rmt | 779.40 | 26889.00 |
| Supplying and laying, filling, jointing and testing SWG SP-1 pipes of ISI make confirming to IS 1651 & 4127 1st quality with air tight Cement joints in CM (1.5:1)prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping including cost and conveyance of all materials to site and all labour charges for finished item of work (APSS NO 1301 & 1318) (152.40mm dia SWG pipe upto 3\ depth) | ||||||
| 18 | AS PER TENDER DOCUMENT | As per tender document | 34.50 | Rmt | 543.10 | 18737.00 |
| Supplying and laying, filling, jointing and testing SWG SP-1 pipes of ISI make confirming to IS 1651 & 4127 1st quality with air tight Cement joints in CM (1.5:1)prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping including cost and conveyance of all materials to site and all labour charges for finished item of work (APSS NO 1301 & 1318) (101.60 mm dia SWG pipe upto 3\ depth) | ||||||
| 19 | AS PER TENDER DOCUMENT | As per tender document | 5.00 | Nos | 334.75 | 1674.00 |
| Supply and fixing of telephone jack type socket with top on MS box with modular plate cover with screws connections etc., Makes : GM G Home / Gold Medal Olive / Million Zoom /Anchor Penta Cherry / Great white Omega / HPL | ||||||
| 20 | AS PER TENDER DOCUMENT | As per tender document | 7.00 | Nos | 572.80 | 4010.00 |
| Supply and fixing of modular Electronic stept type fan regulator hum free step type socket size with MS box, front plate in the existing switch board ( Modular Type ) Makes : Legrand Myrius / Cabtree Verona / Million / Logus/ Gold Medal Curve / Anchor Roma viola / CPL / GreatWhite / Vimal / GM Four-Five / HPL / L&T / Salzar / Stanjo | ||||||
| 21 | AS PER TENDER DOCUMENT | As per tender document | 7.00 | Nos | 2404.04 | 16828.00 |
| Supply of 48\" (1200mm) 5 star rated Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings but without Regulator. with all standard accessories. Makes : Crompton / Bajaj / Orient | ||||||
| 22 | AS PER TENDER DOCUMENT | As per tender document | 20.00 | Nos | 871.43 | 17429.00 |
| Supply and Fixing and transportation of 20W, 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per ISspecifications, minimum CRI=80,.etc complete with 50,000 burning hours with BIs Certification.LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs. | ||||||
| 23 | AS PER TENDER DOCUMENT | As per tender document | 16.00 | Nos | 189.85 | 3038.00 |
| Supply and fixing of batten holder / slanting holder (Makes : Anchor / Gold Medal Olive / Million Zoom). in lieu of ceiling rose of light point complete with all connections and all labour charges with 18 Watt CFL bulb Makes : Phillips / Crompton / Bajaj / Surya / Havells / HPL/ Halonix. | ||||||
| 24 | AS PER TENDER DOCUMENT | As per tender document | 1.00 | Each | 12531.15 | 12531.00 |
| Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia \B\ Class G.I Pipe of 2.5Mtr length as per National Electric Code and earth connection from electrode Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder and providing 18\" dia 18\" height 3\" thick hume pipe ring covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II). | ||||||
| 25 | AS PER TENDER DOCUMENT | As per tender document | 20.00 | Rmt | 384.75 | 7695.00 |
| Supply and run of 4 of 6 Sq mm F.R L.S. / HFFR P.V.C. insulated flexible copper cable 1100 V grade as per IS: 694 / 1990 specifications and 1 run of 4 Sq mm F.R L.S. / HFFR P.V.C. insulated flexible copper cable 1100 V grade as per IS: 694 / 1990 specifications in the existing conduit pipe for run of mains from main panel board to TPN DB\S with pin type lugs and connections Makes of Wires : Finolex / RR kabel / Havells / APAR EBXL / KEI /L&T / V-Guard. | ||||||
| 26 | AS PER TENDER DOCUMENT | As per tender document | 20.00 | Rmt | 207.25 | 4145.00 |
| Supply and run of 2 of 6 Sq mm F.R L.S. / HFFR P.V.C. insulated flexible copper cable 1100 V grade as per IS: 694 / 1990 specifications and 1 run of 2.50 Sq mm F.R L.S. / HFFR P.V.C. insulated flexible copper cable 1100 V grade as per IS: 694 / 1990 specifications in the existing conduit pipe for run of mains from main panel board to TPN DB\S with pin type lugs and connection. Makes of Wires :Finolex / RR kabel / Havells / APAR EBXL / KEI /L&T / V-Guard. | ||||||
| 27 | AS PER TENDER DOCUMENT | As per tender document | 60.00 | Rmt | 156.95 | 9417.00 |
| Supply and run of 2 of 4 Sq mm F.R L.S. / HFFR P.V.C. insulated flexible copper cable 1100 V grade as per IS: 694 / 1990 specifications and 1 run of 2.50 Sq mm F.R L.S. / HFFR P.V.C. insulated flexible copper cable 1100 V grade as per IS: 694 / 1990 specifications in the existing conduit pipe for run of mains from main panel board to TPN DB\S with pin type lugs and connection Makes of Wires :Finolex / RR kabel / Havells / APAR EBXL / KEI /L&T / V-Guard. | ||||||
| 28 | AS PER TENDER DOCUMENT | As per tender document | 100.00 | Rmt | 100.85 | 10085.00 |
| Supply and run of 2 of 2.5 Sq mm PVC F.R L.S. / HFFR P.V.C. insulated flexible copper cable 1100 V grade as per IS: 694 / 1990 specifications and 1 run of 1.00 Sq mm F.R L.S. / HFFR P.V.C. insulated flexible copper cable 1100 V grade as per IS: 694 / 1990 specifications in the existing conduit pipe for run of mains from main panel board to TPN DB\S with pin type lugs and connection. Makes of Wires : Finolex / RR kabel / Havells / APAR EBXL / KEI /L&T / V-Guard. | ||||||
| 29 | AS PER TENDER DOCUMENT | As per tender document | 2.00 | Nos | 4709.34 | 9419.00 |
| Supply and fixing 8 Way SPN Distribution board with IP-43 protection (Metal Door) suitable for 1 No. 40 A single phase ELCB / RCCB/DP Isolator as incomer and 6 Nos. 6-32 A 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete Makes : Legrand / Schneider / Siemens / L&T | ||||||
| 30 | AS PER TENDER DOCUMENT | As per tender document | 7.00 | Nos | 379.70 | 2658.00 |
| Supply and Fixing of 16A/6A 3pin plug socket with shutter and 16A modular switch control duly recessed in wall with Galvanised hot deep box of with common switch board including earth connections and all labour charges etc., complete. Makes of Switches : Legrand myreus/Crabtree verona / Gold Madel curve / Million / LogusAnchor Roma viola / Great White /CPL/Vimal/ GM four-five/HPL/L&T | ||||||
| 31 | AS PER TENDER DOCUMENT | As per tender document | 12.00 | Nos | 266.15 | 3194.00 |
| Supply and fixing of 6A 3/2 pin Modular wall plug socket with shutter and 6A 1 way modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : Legrand myreus/Crabtree verona / Gold Madel curve / Million / LogusAnchor Roma viola / Great White /CPL/Vimal/ GM four-five/HPL/L&T/Salzar / Stanjo | ||||||
| 32 | AS PER TENDER DOCUMENT | As per tender document | 35.00 | Nos | 339.00 | 11865.00 |
| Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant Low Smoke (FRLS) / HFFR P.V.C. insulated 1100 V Grade as per IS: 694 / 1990 specification for flexible copper cable (ISI MARK) in existing pipe with 6A 1 way flulsh type modular switch, Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings Makes of Wires : Finolex / RR kabel / Havells / APAR EBXL / KEI /L&T / V-Guard Makes of Switches : Legrand Myrius / Cabtree Verona / Million / Logus/ Gold Medal Curve / Anchor Roma viola / CPL / GreatWhite / Vimal / GM Four-Five / HPL / L&T / Salzar / Stanjo | ||||||
| 33 | AS PER TENDER DOCUMENT | As per tender document | 7.00 | Nos | 177.22 | 1241.00 |
| Supply and fixing of concealed box PVC/MS with hook for fanSupply and fixing PVC / MS galvanished Fan hook box with hook including all Labour charges etc., complete. | ||||||
| 34 | AS PER TENDER DOCUMENT | As per tender document | 100.00 | Rmt | 95.15 | 9515.00 |
| Supply and Fixing of ISI 25mm outer dia mediumgrade, FRLS with IS:9537 part 3 regid PVC pipe. concealed in wall with all required accessories including masonary work for light, fan and separate plug point with 8 or 9 Module Hot dip galvanized Metal Box including all labour charges etc., complete. Makes : Sudhakar / Goldmedal / Modi / AKG / VIP / MillionPlast / Precision | ||||||
| 35 | AS PER TENDER DOCUMENT | As per tender document | 150.00 | Rmt | 83.35 | 12503.00 |
| Supply and Fixing of ISI 25mm outer dia heavygrade, FRLS with IS:9537 part 3 regid PVC pipe. concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / GM / Modi / AKG / VIP /Million Plast. | ||||||
| 36 | AS PER TENDER DOCUMENT | As per tender document | 17.34 | sqm | 368.00 | 6381.00 |
| Providing AC sheet roofing using 6mm thick AC sheet of approved make including cost and conveyance of all materials and labour charges for fixing AC sheets and including cost of J-bolts, bituminous washers etc,. and overheads & contractors profit complete for finished item of work. | ||||||
| 37 | AS PER TENDER DOCUMENT | As per tender document | 56.53 | Kgs. | 73.00 | 4126.00 |
| Providing Mild Steel Tubes & pipes of all diameters as per IS-1161, of different diameters, cutting, placing in position, including cost and conveyance of all Mild steel Tubes and all wastages, etc., including overheads & contractors profit complete for finished item of work for purlins of AC sheet roofing. | ||||||
| 38 | AS PER TENDER DOCUMENT | As per tender document | 1.60 | cum | 11316.00 | 18106.00 |
| Reinforced Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for Dummy columns using 40mm size (SS5) hard Granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, but including sales & other taxes on all materials, machine mixing, vibrating, lifting concrete mechanically, laying concrete, curing , overheads & contractors profit, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc. including all operational, incidental and labour charges etc., complete but excluding cost of steel and its fabrication charges for finished item of work upto un supported height up to 3.66 m (APSS No. 402) | ||||||
| 39 | AS PER TENDER DOCUMENT | As per tender document | 220.20 | sqm | 460.00 | 101292.00 |
| Providing imprevious coat to exposed RCC roof slab surface with CM (1:3), 20 mm thick with 1 kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and icluding all oprational, incidental and labour charges for mixing mortar, laying, rendering smoothand thread lining, curing, rounding off junction of wall and slab etc., complete for finished item of work | ||||||
| 40 | AS PER TENDER DOCUMENT | As per tender document | 22.44 | Rmt | 7513.20 | 168596.00 |
| Supplying and fixing stainless steel hand railing, balustrade etc., using 304 or 202 grade stainless steel pipes of 50mm dia nominal bore for hand railing at 3\-0\" high from ground level and 40mm dia nominal bore for vertical supports placed at 5\-0\" c/c and two numbers 25mm dia nominal bore for horizantal pipes placed below hand railing pipe as per the approved drawing including cost and conveyance of all material buffing charges polishing charges etc., complete for finished item of work. | ||||||
| 41 | AS PER TENDER DOCUMENT | As per tender document | 239.70 | sqm | 231.00 | 55371.00 |
| Painting to new external walls with 2 coats of acrylic emulsion paint exterior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912. | ||||||
| 42 | AS PER TENDER DOCUMENT | As per tender document | 757.40 | sqm | 129.00 | 97705.00 |
| Painting to new internal walls with 2 coats of Acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912. | ||||||
| 43 | AS PER TENDER DOCUMENT | As per tender document | 239.70 | sqm | 437.00 | 104749.00 |
| Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work for External walls for:-External Colouring - Providing Putty to External walls | ||||||
| 44 | AS PER TENDER DOCUMENT | As per tender document | 757.40 | sqm | 232.00 | 175717.00 |
| Supplying and finishing (Two coats of HI-BOND Wall Putty Super Fine (Water Resistant) or Equivalent) to interior faces of new walls and ceiling of approved colour as per manufacturers specification including cost and conveyance of materials to site and labour charges such as preparing the wall, applying primary coat etc, complete including of Painting with Acrylic emulsion paint of dulux supreme 3 in a or equivalent brand to interior faces of new walls and ceiling with two coats of approved make, shade and colour over a base coat of primer approved make including cost and conveyance of materials like Acrylic emulsion etc., to site and labour charges such as preparing the wall, applying primary coat, applying two coats of Acrylic emulsion etc., sales and other taxes on cost of all materials, complete for finished item of work in all floors as directed by Engineer-in-charge. | ||||||
| 45 | AS PER TENDER DOCUMENT | As per tender document | 129.06 | sqm | 964.00 | 124414.00 |
| Supplying and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600 mm x 600 mm using Gypsum Board tiles of size not less than 0.595 M x 0.595 M of 12.5 mm thick as per IS 2095 -1992 fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200 mm c/c and fixing the 12.5 mm / 9.5 mm Gypboard Sheet tiles of size 595 mm x 595 mm or 595 mm x 1195 mm and finishing two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd specification including Overheads & Contractors profit complete for finished item of work in all floors. | ||||||
| 46 | AS PER TENDER DOCUMENT | As per tender document | 1.10 | sqm | 7887.15 | 8676.00 |
| Supply and fixing of pre-painted steel top hung and fixed louvered ventilators made of pre - painted steel as per IS 513 of -0.58 mm thick \D quality, galvanized as per IS 277, finish painted with a polyester paint & 4 mm pinhead glass for ventilators with EPDM Gasket with handle made of high grade aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete/masonry wall by means of self expanding screws including 10 mm square guard bars with 6 pitch complete for finished item of work for (i) Ventilators: Top Hung 2 \-0 x 1\-6\" (609.6x457.2mm) outer frame section size of 46mm x 52 mm shutter frame section size of 46mm x 46 mm and (ii) Ventilators: Top Hung 4\-0 x 2\-0 (1219.2x609.6mm) outerframe section size of 46 x 52 m shutter frame section size of 46x46mm Mullion section size of46x70 mm and (iii) Ventilators: Top Hung 4 \-0 x 3\-0 (1219.2x914.4mm) outer frame section size of 46 x 52m m shutter frame section size of 46 x 46 mmMullionsectionsizeof46x70mm | ||||||
| 47 | AS PER TENDER DOCUMENT | As per tender document | 17.30 | sqm | 8047.35 | 139219.00 |
| Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter provision ? (only 2-glass shutters) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (80 mm x 52 mm)/ (94 mm x 45 mm) x 2.20 mm for outer frames, (54 mm x 38 mm)/(39 mm x 58 of item of worktransportation, erection at site complete for finishedall materials, accessories, labour charges forfasteners, silicon rubber sealant, easy glazing/the system is to be installed at the site using anchorthe system is to be installed at the site using anchorshall have single point locking with Touch Lock and be co-extruded with Grey colour soft PVC. Systemthick clear float glass of reputed make duly fixed withwelding. The window sash shall be fitted with 5 mm1.0/1.2 mm prefabricated & welded through fusion galvanized up to 50 microns of minimum thickness ofglazing system, structurally reinforced with hot dip sliding shutter frames capable of mounting single mm) x 2.20 mm for finished item of work. | ||||||
| 48 | AS PER TENDER DOCUMENT | As per tender document | 6.72 | sqm | 2795.00 | 18782.00 |
| Providing and fixing 30mm thick FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat mouldedPrelam Pac ?C? channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and20mm shall be tapered in 450 angle on either side forming stiles; and 5mm thick, 95mm wide Prelam Pac sheet out of which 75mm shall beflat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as gap insert for top and bottomrail. Panelling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded/ sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the ?C? channel using Pac solvent cement adhesive etc. complete as per direction of Engineer ? in-charge, manufacture specification anddrawing. | ||||||
| 49 | AS PER TENDER DOCUMENT | As per tender document | 20.00 | Rmt | 444.00 | 8880.00 |
| Supply and fixing of factory made Bathroom door frames without threshold, fabricated from prepainted cold roll formed section 50mm x 50 mm made of galvanized steel as per IS ? 513 ?D? quality, galvanized as per IS-277 steel colour coated sections primer coated with epoxyprimer finish painted with polyester paint the frame section filled with polyurethane (P.U. Foam) of 40 Kg/Cum; and the sections joined by means of 1.25mm thick CRCA electroplated corner brackets of size 75 x 75 mm and 1.25mm thick electroplated stiffeners of size 150mm for fixing hold fasts and hinges together with the following MS Power coated fitting (Supply and fixing) of approved make. a) 6 Nos M.S. Z. Type hold fasts made of 30mm x 3 mm MS flat of 230mm long, 3 Nos each side expandable PVC covered screw type fasteners b) 2.5 mm x 300 mm long ?T? hinges / 2.5mm x 50 mm x 100mm two way but hinges (3 Nos for single leaf or 2 Nos for Double leaf /leaf )c) 12 mm Diameter MS tie rod at bottom with necessary size of nuts on either side. | ||||||
| 50 | AS PER TENDER DOCUMENT | As per tender document | 11.97 | Sqm | 12686.00 | 151851.00 |
| Supply & Fixing of Powder Coated Mild Steel doors, frames & shutters made of Skin pass galvanized Iron sheet conforming to Base Steelas per IS 513 ?D? Quality, Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr with powder coating ofthickness60-65 Microns, frame with 1.2mm thick Skin pass Galvanized Iron sheet formed to single rebate profile of size 100 mm X 58 mm and filled with in-fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane powder for powder coating of thickness 60 ? 65 microns and are coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability, the Shutter provided with 6 MM clear floatvision glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick). Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for industrial, commercial, residential, clean room applications | ||||||
| 51 | AS PER TENDER DOCUMENT | As per tender document | 180.40 | sqm | 439.00 | 79196.00 |
| Ornamental plastering to ceiling 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge and overheads & contractors profit etc., complete for RCC exposed faces for finished item of work. (SS 901,903 & 904) | ||||||
| 52 | AS PER TENDER DOCUMENT | As per tender document | 816.70 | sqm | 423.00 | 345464.00 |
| Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges but including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) | ||||||
| 53 | AS PER TENDER DOCUMENT | As per tender document | 39.90 | sqm | 1112.00 | 44369.00 |
| Dadooing to walls with Decorated coloured back ground glazed tiles 1st quality of premium quality and colour as approved by Engineer, 7mm thick of size not less than 200 mm x 300 mm of approved colour,shade and make set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, cost of seigniorage on materials and all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge. for:-Dadooing tiles in CM 1:5 | ||||||
| 54 | AS PER TENDER DOCUMENT | As per tender document | 9.10 | sqm | 1001.00 | 9109.00 |
| Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed) excluding seigniorage charges on all materials but including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., including overheads and contractor profit complete for finished item of work. (APSS No.707 & 701) | ||||||
| 55 | AS PER TENDER DOCUMENT | As per tender document | 19.60 | sqm | 1129.00 | 22128.00 |
| Providing skirting to internal walls to 10cm height/risers of steps with Vitrified Tiles length equals to flooring stone, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 Kgs per sqm and joined with white cement paste mixed with pigment of matching shade of full depth including cost of material like Kota stone, cement sand and water etc., complete including seigniorage charges etc., complete for finished item of work for skirting/Risers with Vitrified Tiles in CM 1:3 | ||||||
| 56 | AS PER TENDER DOCUMENT | As per tender document | 155.70 | sqm | 1136.00 | 176875.00 |
| Flooring with Virtified tiles of size 600 x 600 mm not less than 7mm thick normal colour 1st quality set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with 3mm Nylon spacers at each corner of the tile andn joints grooted with laticrete epoxy grout of pigment of approved shade of tiles over a bed of C.C. or R.C.C. slab,including cost and conveyance of all materials like cement, sand, water,tiles,white cement etc., to site (excluding cost of C.C. bed) cost of seigniorange charges on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer -in-charge curing etc., complete for finished item of work.(APSS No.707 & 701) | ||||||
| 57 | AS PER TENDER DOCUMENT | As per tender document | 16.10 | sqm | 6191.00 | 99675.00 |
| S&F with 16 to 18 mm thick High Polished Granite 16 to 18 mm thick up to 8\-00 (2.43 M) other than black (premium colours) in single piece with edges full Rounded and set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointing with white cement paste mixed with pigment of matching shade to match the shade of stones (to full depth), including cost and conveyance of all materials like cement sand, water, flooring stones etc. to site excluding cost of seigniorage charges, but icluding cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, half rounding, lift charges etc. including overheads & contractors profit complete for finished item of work for Treads. (APSS No.701 & 707) | ||||||
| 58 | AS PER TENDER DOCUMENT | As per tender document | 5.90 | sqm | 4388.00 | 25889.00 |
| S&F with 16 to 18 mm thick High Polished Granite 16 to 18 mm thick up to 8\-00 (2.43 M) other than black (premium colours) in single piece set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointing with white cement paste mixed with pigment of matching shade to match the shade of stones (to full depth), including cost and conveyance of all materials like cement sand, water flooring stones etc. to sitecost of excluding seigniorage charges but including cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges etc. including overheads & contractors profit complete for finished item of work for Risers of stair cases (APSS No.701 & 707) for Risers: | ||||||
| 59 | AS PER TENDER DOCUMENT | As per tender document | 12.80 | M.T. | 56239.00 | 719859.00 |
| Supplying, fitting and placing HYSD (Fe 500/TMT grade as per IS 1786-1985) bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36mm dia including over laps and wastage, where they are not welded including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work. | ||||||
| 60 | AS PER TENDER DOCUMENT | As per tender document | 64.48 | Sqm | 805.00 | 51903.00 |
| Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure, parapet walls with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:4 (290x100x140) | ||||||
| 61 | AS PER TENDER DOCUMENT | As per tender document | 83.70 | cum | 6601.00 | 552504.00 |
| Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) | ||||||
| 62 | AS PER TENDER DOCUMENT | As per tender document | 287.18 | Cum | 228.00 | 65477.00 |
| Filling with Carted Gravel in trenches, sides of foundations & basement from approved quarry consolodating deposited layer by watering and ramming including all operational, incidental, labour charges, complete including cost and conveyance of sand / gravel for finished item of work. (APSS .No. 309 & 310) | ||||||
| 63 | AS PER TENDER DOCUMENT | As per tender document | 125.06 | cum | 45.00 | 5628.00 |
| Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges if T & P etc., complete for finished item of work.(APSS NO.309 & 310) | ||||||
| 64 | AS PER TENDER DOCUMENT | As per tender document | 0.90 | cum | 5047.48 | 4543.00 |
| Plain Cement Concrete corresponding to M-15 grade as per IS 456 nominal mix using 20mm size nominal machine crushed hard granite metal(coarse aggregate) from approved quarry including coat and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as mixing laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, for Machine mix PCC -M-15 Bedblocks. | ||||||
| 65 | AS PER TENDER DOCUMENT | As per tender document | 6.80 | sqm | 970.00 | 6596.00 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work. SUNSHADES | ||||||
| 66 | AS PER TENDER DOCUMENT | As per tender document | 30.45 | sqm | 4823.00 | 146870.00 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work. RCC WALLS OF 230MM THICK | ||||||
| 67 | AS PER TENDER DOCUMENT | As per tender document | 10.89 | sqm | 1575.00 | 17152.00 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work. WAIST SLABS OF 175 MM THICK | ||||||
| 68 | AS PER TENDER DOCUMENT | As per tender document | 216.50 | sqm | 1277.00 | 276471.00 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work. ROOF SLABS OF 125MM THICK | ||||||
| 69 | AS PER TENDER DOCUMENT | As per tender document | 11.40 | cum | 10701.00 | 121991.00 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work. ROOF BEAMS: | ||||||
| 70 | AS PER TENDER DOCUMENT | As per tender document | 10.20 | cum | 11996.00 | 122359.00 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work. Columns: | ||||||
| 71 | AS PER TENDER DOCUMENT | As per tender document | 0.90 | cum | 11999.00 | 10799.00 |
| Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work. Lintels: | ||||||
| 72 | AS PER TENDER DOCUMENT | As per tender document | 0.90 | cum | 6136.00 | 5522.00 |
| Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work. (STEPS) | ||||||
| 73 | AS PER TENDER DOCUMENT | As per tender document | 9.30 | cum | 11537.00 | 107294.00 |
| Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work. Plinth Beams | ||||||
| 74 | AS PER TENDER DOCUMENT | As per tender document | 40.90 | cum | 9012.00 | 368591.00 |
| Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 330 kgs per 1 cum of concrete and required quantity of Chemical Admixtures per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work. FOOTINGS | ||||||
| 75 | AS PER TENDER DOCUMENT | As per tender document | 33.20 | cum | 98.00 | 3254.00 |
| Raised pointing to RR / CRS Masonary in CM (1:3) including cost and conveyance of all materials in site seigniorage charges, curing, labour charges etc., complete for finished item of work as per SS | ||||||
| 76 | AS PER TENDER DOCUMENT | As per tender document | 14.30 | cum | 4153.00 | 59388.00 |
| C.R. stone masonary in 2nd sort in CM(1:6) prop. (Cement : Sand) using hard granite stones from approved quarry including cost and conveyance of all materials like cement, sand, water, granite stones, etc., from approved quarry to site and including labour for cutting stones to required size and shape, mixing of cement, mortor, construction, scaffolding charges, curing etc., complete for finished item of work in foundation & basement( APSS. No 6015 & 601) | ||||||
| 77 | AS PER TENDER DOCUMENT | As per tender document | 23.30 | cum | 3493.00 | 81387.00 |
| Random Rubble Stone masonry in CM (1:8) prop: (cement : sand) using hard Granite stones from approved quarry including cost and conveyance of all materials like cement,sand water, granite stones, etc., from approved quarry to site and including labour for cutting stones to required size and shape mixing of cement, mortar, construction, scaffolding charges, curing etc., complete for finished item of work in foundation & basement. (APSS No. 615 & 601) | ||||||
| 78 | AS PER TENDER DOCUMENT | As per tender document | 30.90 | cum | 3795.00 | 117266.00 |
| Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX | ||||||
| 79 | AS PER TENDER DOCUMENT | As per tender document | 201.60 | cum | 386.47 | 77912.00 |
| Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges in Ordinary Soil-Manual Means-Upto 3M depth etc as per SS 20B (ApSS 308) for:-Ordinary soil-Mechanical Means up to 3.0 m and cost of dewatering may be added 5% of a+b ,where required, up to 10% of labour cost. Assessment for dewatering shall be made as per site condition. |
AI Tender Summary
Tender Timeline
Jan 01, 1900
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender