Tender Document For Supply Of Machinery And Equipment For Wooden Handicrafts Testing Laboratory Epch At Saharanpur For Wooden Handicrafts, TENDER DOCUMENT FOR SUPPLY OF MACHINERY AND EQUIPM-Uttar Pradesh

Tender Document For Supply Of Machinery And Equipment For Wooden Handicrafts Testing Laboratory Epch At Saharanpur For Wooden Handicrafts-Computerized Universal Wood Testing Machine , Portable Digital Moisture Meter ( Delmhorst Moisture Meter ) , Carton Drop Tester With Platform , Back Pull Durability Tester , Inclined Stability Testing Platform , Chair Strength / Stability Tester , Vibration Tester , Seat Impact Tester , Chair Arm Tester , Ca Tb Flammability Set , Lab Conditioning Equipment , De-Humidifier , Compressor, Pencil Hardness Tester , Sharp Point Tester , Sharp Edge Tester , Electrical Metal Cutting Tools , Digital Push Pull Gauge , Bench Vice , Tv Simulative Loading Fixture With Load Set , Coating Adhesion Tape + Multi-Tooth Cutting Blade , Chair Rear Stability Test , Foam For Use With Loading Pads , Sand Bag Nspecification N10 Lbs ( 75 Pcs ) & 5 Lbs ( 5 Pcs ) . Tolerance +-2%, Steel Ball Sealed In Water Proof Nylon Fabric Bag , Ptfe Tape, Fixture For Chair Front Stabilty Test , Hinged Door Vertical Load Mass , Computer Systems , Bifma Chair Measuring Device , Bs En Chair Measuring Device , Loading Point Template, Test Dummy , Impactor , Impactor Hammer , BS Stability

INR 11800 /-

INR 500000.0 /-

Refer document

Name of Work: TENDER DOCUMENT FOR SUPPLY OF MACHINERY AND EQUIPMENT FOR WOODEN HANDICRAFTS TESTING LABORATORY (EPCH) AT SAHARANPUR FOR WOODEN HANDICRAFTS
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Computerized Universal Wood Testing machine\nSpecification\nEquipped with 6 or 8 Arm Adjustable pneumatic cylinder output:10-350 kg, Adjustable cylinder working cycle rate:<20 cycle/Min. Also to add 3-seater (seat & back) test function	BI01010001010000000000000515BI0100001113	1	no
2	2	Portable Digital Moisture Meter (Delmhorst moisture meter) \nSpecification\nDigital moisture content meter with insulated pins and capable of measuring a moisture content range. Brand : Delmhorst	BI01010001010000000000000515BI0100001113	2	no
3	3	Carton Drop Tester with platform\nSpecification\nShall be capable to hold the test samples in correct orientation and ensure free fall within 2 degrees upon impact for flat face drops or flat drops on ends, within 5 degrees upon impact for edge drops and corner drops for rectangular containers. Shall be equipped with ruler to correctly set the drop height of the test samples.\nIt shall provide a Impact surface (like concrete, stone or steel – at least ½ in thickness) that is horizontal and flat, massive enough to be immovable and rigid enough to be non-deformable under the test conditions. For very large containers, it may be necessary to use a hoist, sling, and tripping devices, or a solenoid-operated drop test mechanism and suspension devices. Weight Capacity : 68 Kgs\n	BI01010001010000000000000515BI0100001113	1	no
4	4	Back Pull Durability Tester (Back Rest Tester) - Computerised BIFMA X5.1 (Tilt Mechanism, Back Rest durability - Type I, II, & III Type chairs)\nSpecification\nAdjustable cylinder output:30-180 kgs , Adjustable\ncylinder working cycle rate:<20 cycle/Min.	BI01010001010000000000000515BI0100001113	1	no
5	5	inclined Stability Testing Platform - Adjustable\nSpecifiaction\n48.0 in L X 96 in W,1 Incline plane with stop and base level adjusters – Testing platform can be adjusted manually to the level of desired angle. Shall be able to maintain a steady angle	BI01010001010000000000000515BI0100001113	1	no
6	6	Chair Strength/Stability Tester - Computerised\nSpecification\nLoad/Force Range : 0-300 Kg; motorized Strap and pulley system with adjustable angle to apply force	BI01010001010000000000000515BI0100001113	1	no
7	7	Vibration Tester\nSpecification\nTest Platform (size : 96.0 in L X 96.0 in W) of sufficient strength and rigidity to give uniform vibrations when loaded and shall be supported rotary motion mechanism\nThe double amplitude displacement of the vibration shall be fixed at 1in. (25mm), and frequency shall be variable from 2 to at least 5Hz (cycles per second).\nThe vibration test machine shall be equipped with fences, barricades, or other restraints to keep the test specimen from falling off the platform without restricting its vertical motion Specification : ASTM D999-01 Method A2	BI01010001010000000000000515BI0100001113	1	no
8	8	Seat Impact Tester –Computerised\nSpecification\nMax. impact Load 440 lb , Impact height adjustment: 0-250 mm ; Impact speed adjustment: 5-15 Cycles/min., Effective Width of specimen<1200mm; Allowable Seat height adjustment: 0-1000 mm	BI01010001010000000000000515BI0100001113	1	no
9	9	Chair Arm tester - Computerised\nSpecification\nCylinder Output force 30-150 kgs; Effective Height: 1800 mm; Effective width : 1700 mm; Size : 1900 x 1000x 2000 mm	BI01010001010000000000000515BI0100001113	1	no
10	10	CA TB Flammability Set up\nSpecification\nCA TB 117-2013 Flammability lab with Fume ducted exhaust	BI01010001010000000000000515BI0100001113	1	no
11	11	Lab Conditioning Equipment\nSpecification\nBlue star Make; Capable of maintaining a temperature of 59 to 86 (15-30°C) and a relative humidity of 35 to 65%	BI01010001010000000000000515BI0100001113	1	no
12	12	De-humidifier\nSpecification\nEquipped with Sensor to de-humidify when humidity exceeds the limit and maintain the humidity within limits	BI01010001010000000000000515BI0100001113	1	no
13	13	Compressor\nSpecification\nSCREW AIR COMPRESSOR – Frequency Controlled KAESER make single stage fluid cooled air end with world renowned sigma profile heavy duty stationary screw air compressor each having a range of FAD from 241 cfm (6.85 m3/min) at 10 barg and Max Working pressure is 12 bar(g) at the outlet, driven by Electric motor of 45 kw rated output. The FAD will be guaranteed as per ISO 1217 Addition4, 2009. -1 no\nVertical Air Receiver manufactured in accordance with ASME Section VIII Division 1 design code. The Air Receiver supply will be complete with safety relief valve, pressure gauge, drain valve and hardware. The air receiver will be duly painted from outside and Bitumin Paint from - no 1\nKAESER make filter inclusive of coalescing filter to bring down the Oil Content down to 0.1 mg/m3 and particle size down to 0.1m. -1 no\nClosed loop Piping (PPR) -1 no	BI01010001010000000000000515BI0100001113	4	no
14	14	Pencil hardness tester\nSpecification\n• Metal plate – provides a stroke surface and a supporting edge for the pencil holder\n• Pencil holder – ensures the angular orientation of the pencil holder (90°during preparation; 45°during testing). It shall be rested on the metal plate and not in contact with the sample.\n• Weight – shall be 470 gram, offers a constant downward force onto the pencil holder during testing.\n	BI01010001010000000000000515BI0100001113	1	no
15	15	Sharp Point Tester\nSpecification\nComply the requirement of 16 cfr 1500.49, ASTMF 963,EN -71	BI01010001010000000000000515BI0100001113	1	no
16	16	Sharp Edge Tester\nSpecification\nComply the requirement of 16 cfr 1500.49, ASTMF 963,EN -71	BI01010001010000000000000515BI0100001113	1	no
17	17	Electrical metal Cutting Tools\nSpecification\nHeavy duty	BI01010001010000000000000515BI0100001113	1	no
18	18	Digital Push Pull Gauge\nSpecification\nRange - 0-50 (kgf), 0-500 (N), 0-110 (Lbf) Readability : 0.01 kgf, 0.1N, 0.01lbf; Accuracy: 0.2 Kgf, 0.5 Lbf, 2 N	BI01010001010000000000000515BI0100001113	1	no
19	19	Bench Vice\nSpecification\nHeavy duty	BI01010001010000000000000515BI0100001113	1	no
20	20	TV Simulative Loading Fixture with load set\nSpecification\nfull set of test equipment for UL1678 Tip Stability	BI01010001010000000000000515BI0100001113	1	no
21	21	Coating adhesion Tape + Multi-tooth cutting blade\nSpecification\n25-mm (1.0-in.) wide semi-transparent pressure sensitive	BI01010001010000000000000515BI0100001113	1	no
22	22	Chair Rear Stability test Disc\nSpecification\n10 kg per disc, COMPLY WITH EN 1022:2005 & BIFMA Specifications. set of 13 pcs Discs.	BI01010001010000000000000515BI0100001113	1	no
23	23	Foam for use with Loading pads\nSpecification\nComply requirement BS EN 1728:2012 Specifications	BI01010001010000000000000515BI0100001113	1	no
24	24	Sand bag\nSpecification\n10 Lbs (75 pcs) & 5 Lbs (5 pcs). Tolerance +-2%, Steel ball sealed in water proof Nylon fabric bag	BI01010001010000000000000515BI0100001113	1	no
25	25	PTFE Tape\nSpecification\nWidth : 6mm min. , Thickness: 0.0056 in\n	BI01010001010000000000000515BI0100001113	1	no
26	26	Fixture for chair front stabilty test\nSpecification\nComply the requirement BIFMA x 5.1 2011	BI01010001010000000000000515BI0100001113	1	no
27	27	Hinged Door vertical load mass -25 Lbs\nSpecification\nMass divided into two equal parts and attached together to be able to put on hinged doors	BI01010001010000000000000515BI0100001113	1	no
28	28	Computer systems\nSpecification\nDEL/HP/Lenovo - 10 Pcs	BI01010001010000000000000515BI0100001113	1	no
29	29	BIFMA Chair Measuring Device\nSpecification\nComplying to BIFMA Specifications (Weight 100+/-2.5 lbs)	BI01010001010000000000000515BI0100001113	1	no
30	30	BS EN Chair Measuring Device\nSpecification\nComplying to BS EN 12520 Specifications (Weight 64+1-0.g kgs)	BI01010001010000000000000515BI0100001113	1	no
31	31	Loading Point Template\nSpecification\nComplying to Specifications (BS EN 1728 : 2012 Section 5.1, EN 1002:2005 Section 4.6, EN 581-2: 2009), Weight 20 Kgs. Made of Hardwood and painted. Hinge jointed allows the two sections of template opened between 90 to 135 degrees	BI01010001010000000000000515BI0100001113	1	no
32	32	Test Dummy\nSpecification\nComplying to BS EN 13759:2012 Section 4.1 Specifications	BI01010001010000000000000515BI0100001113	1	no
33	33	Impactor\nSpecification\nComplying to BS EN 1728:2012 Section 5.9, BS EN 1725:1998, BS EN 1730 Section 5.3, BS EN 747-2:2007 Section 4.3 Specifications. Weight : 25 Kgs	BI01010001010000000000000515BI0100001113	1	no
34	34	Impactor Hammer\nSpecification\nComplying to BS EN 1728, EN 581-2 Specifications	BI01010001010000000000000515BI0100001113	1	no
35	35	BS Stability Tester\nSpecification\nComplying to BS EN 1022 specifications	BI01010001010000000000000515BI0100001113	1	no
36	36	Shipping CIF	BI01010001010000000000000515BI0100001113	1	no
37	37	Installation/ Training	BI01010001010000000000000515BI0100001113	1	no