Repairing Maintenance Of Scrap Shed Of Regional Store Including Allied Civil Works At Cws Ibv, CWS IB VALLEY-Odisha

Repairing Maintenance Of Scrap Shed Of Regional Store Including Allied Civil Works At Cws Ibv-1 Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of : G.S. Sheet 2 Providing And Fixing Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ( + 0.05 % ) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineerin-Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X 55 Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Costof Purlins, Rafters And Trusses And Including Cutting To Size Andshape Wherever Required. N 3 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm ( + 0.05 % ) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling / Self Tapping Screws Complete :Ridges Plain ( 500 - 600Mm ) 4 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade :One Or More Coats On Old Work 5 Distempering With 1St Quality Acrylic Washable Distemper ( Ready Made ) Of Approved Manufacturer And Of Required Shade And Colour Complete. As Per Manufacturers Specification. One Or More Coats On Old Work 6 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : Old Work ( Two Or More Coat Applied @ 1.67 Ltr / 10 Sqm ) On Existing Cement Paint Surface 7 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 8 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 9 12 Mm Cement Plaster Of Mix : 1:4 ( 1 Cement: 4 Fine Sand ) 10 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 11 Cement Concrete Flooring 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 11.3.1 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate 12 Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. 13 Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 14 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work 15 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar 16 Brick Work With Fly Ash Brick ( 230X125x75 Mm Size ) Bricks Of Class Designation 10 In Foundation And Plinth In: Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 17 Carriage Of Garbage Or Earth Mixed Other Wastes By Tractor Trolley Including Manual Loading And Unloading And Disposing At Garbage Dumps Or At Any Other Specified Location As Per The Direction Of Engineer-In-Charge. ( I ) For Lead Of 1 Km 18 Taking Out Doors, Windows And Clerestory Window Shutters ( Steel Or Wood ) Including Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below 19 Lettering With Black Japan Paint Of Approved Brand And Manufacture. 20 Neat Cement Punning. 21 Clearing Grass And Removal Of The Rubbish Upto A Distance Of 50M Outside The Periphery Of The Area Cleared. 22 Total Impact Of Gst For The Purpose Of Ctc

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	13-07-2020	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	15-07-2020
2	15-07-2020	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	20-07-2020

Refer document

INR 3400.0 /-

INR 2.65 Lakhs /-