Rural Development Government Departments Closing in 0 days TDR #24773343

Tender For Civil Works - Roads :-Mr-N19-20Sherghati/14

Issued by Government Departments · SHERGHATI, Bihar
Tender Value
4.98 Crore
Estimated cost
Bid Submission
10 Jul 2020
0 days left
EMD
9.97 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
SHERGHATI → Bihar
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Civil Works - Roads :-Mr-N19-20Sherghati / 14

BOQ

Name of Work: MR-N-19-20 SHERGHATI-14
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11GT ROAD TETARIYA TO DAHIYAR
22Clearing and Grubbing Road Land (By manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of E/I2.76Hec
33Scarifying existing Bituminous Surface\nScarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.4312.5Sqm
44Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and\nleads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 \nlead upto 1000 m as per Technical Specification Clause 303.1.3450Cum.
55Granular Sub-base with Well Graded Material (Table 400.1)\nConstruction of granular sub-base by providing well graded material (Crushed Stone Aggregates and Coarse Sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 401 For Grading II Material529.13Cum.
66Water Bound Macadam with Stone screening WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. By Mechanical Means420.56Cum.
77Water Bound Macadam with Stone screening WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.By Mechanical Means1319.63Cum.
88Prime Coat (Low Porosity) Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per Technical Specification Clause 50217595Sqm.
99Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.17595Sqm.
1010Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes\nper hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler,\ntransporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and\nalignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH\nspecification clause No. 508 complete in all respects.439.88Cum.
1111Ordinary Kilometer Stone (Precast)5No
1212200 m stone (precast)18No
1313Direction and Place Identification signs with size more than 0.9 sqm size boardRetro-reflectorised Traffic SignsProviding and erecting direction and place identification retro-\reflectorised sign as per IRC:67\nmade of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area\nexceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of\nproperly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per\napproved drawing and Technical Specification Clause 1701.1.92sqm
1414Road Markers/Road Stud with Lens ReflectorProviding and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense\nreflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable\nbituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.12Each
1515Road DelineatorsSupplying and installation of delineators (Road way indicators, hazard markers, object markers), 80-100 cm high above ground\nlevel, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels\nat the top, buried or pressed into the ground and conforming to IRC- 79 and the drawings.5Each
1616Portable Barricade in Construction Zone Installation of a steel portable barricade with horizontal rail 300 mm wide, 2.5 m in length fitted on a 'A' frame made with 45 x 45 x\n5 mm angle iron section, 1.5 m in height, horizontal rail painted (2 coats) with yellow and white stripes, 150 mm in width at an\nangle of 450 C, 'A' frame painted with 2 coats of yellow paint, complete as per IRC:SP:55-20015Each
1717Traffic Cone Installation of a steel portable barricade with horizontal rail 300 mm wide, 2.5 m in length fitted on a 'A' frame made with 45 x 45 x\n5 mm angle iron section, 1.5 m in height, horizontal rail painted (2 coats) with yellow and white stripes, 150 mm in width at an\nangle of 450 C, 'A' frame painted with 2 coats of yellow paint, complete as per IRC:SP:55-200130Each
1818Retro-reflectorised Traffic SignsProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens\ntype reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post\n75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450\nmm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
1919600 mm equilateral triangle22Each
2020600 mm circular ,18No.
2121600 mm x 450 mm rectangular,10No.
2222Planting of Trees and their Maintenance for one Year Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with\ndecayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and\nmaintaining the plants for one year230Each
2323Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.Pedestrian Crossing(2 m in length and providing
2424At as For Bt Portion924sqm
2525Providing and fixing of typical MR informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates\nof 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be\nwelded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of\nmiddle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade\nblocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by\n47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border\netc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of\nframed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure\n1700.13No.
2626Brick masonry work in cement mortar 1:3 in parrapet excluding pointing and plastering as per drawing and technical specifications Clauses 600, 900 and 1208.449.92CUM
2727Providing M20 (PCC 1:2:4) in substructure:-- Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204.208Cum.
2828Plastering with cement mortar (1:4 ), 15 mm Thick on brick work in sub-structure as per Technical Specifications Clause 613.4 & 1204.348.16Sqm
2929Add 12.0% GST1Rupees
3030Add 1.0% Labour Cess1Rupees
3131Add Seigniorage1Rupees
3232Schedule - 2 (Maintenance)20Quaterly
3333GST @ 12% on Schedule - 2 (Maintenance)1Rupees
3434LABOUR CESS @ 1.0% on Schedule - 2 (Maintenance)\n1Rupees
3535Add seigniorage on Maintenance1Rupees
3636GT ROAD (71 MILE) TO KOBRA CAMP, BARWADIH
3737Clearing and Grubbing Road Land (By manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of E/I1.8Hec
3838Scarifying existing Bituminous Surface\nScarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.1687.5Sqm
3939Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and\nleads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 \nlead upto 1000 m as per Technical Specification Clause 303.1.2250Cum.
4040Granular Sub-base with Well Graded Material (Table 400.1)\nConstruction of granular sub-base by providing well graded material (Crushed Stone Aggregates and Coarse Sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 401 For Grading II Material69.12Cum.
4141Water Bound Macadam with Stone screening WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. By Mechanical Means42.66Cum.
4242Water Bound Macadam with Stone screening WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.By Mechanical Means860.63Cum.
4343Prime Coat (Low Porosity) Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per Technical Specification Clause 50211475Sqm.
4444Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.11475Sqm.
4545Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes\nper hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler,\ntransporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and\nalignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH\nspecification clause No. 508 complete in all respects.286.88Cum.
4646Ordinary Kilometer Stone (Precast)4No
4747200 m stone (precast)12No
4848Direction and Place Identification signs with size more than 0.9 sqm size boardRetro-reflectorised Traffic SignsProviding and erecting direction and place identification retro-\reflectorised sign as per IRC:67\nmade of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area\nexceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of\nproperly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per\napproved drawing and Technical Specification Clause 1701.1.92sqm
4949Road Markers/Road Stud with Lens ReflectorProviding and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense\nreflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable\nbituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.12Each
5050Road DelineatorsSupplying and installation of delineators (Road way indicators, hazard markers, object markers), 80-100 cm high above ground\nlevel, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels\nat the top, buried or pressed into the ground and conforming to IRC- 79 and the drawings.5Each
5151Portable Barricade in Construction Zone Installation of a steel portable barricade with horizontal rail 300 mm wide, 2.5 m in length fitted on a 'A' frame made with 45 x 45 x\n5 mm angle iron section, 1.5 m in height, horizontal rail painted (2 coats) with yellow and white stripes, 150 mm in width at an\nangle of 450 C, 'A' frame painted with 2 coats of yellow paint, complete as per IRC:SP:55-20015Each
5252Traffic Cone Installation of a steel portable barricade with horizontal rail 300 mm wide, 2.5 m in length fitted on a 'A' frame made with 45 x 45 x\n5 mm angle iron section, 1.5 m in height, horizontal rail painted (2 coats) with yellow and white stripes, 150 mm in width at an\nangle of 450 C, 'A' frame painted with 2 coats of yellow paint, complete as per IRC:SP:55-200130Each
5353Retro-reflectorised Traffic SignsProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens\ntype reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post\n75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450\nmm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
5454600 mm equilateral triangle16Each
5555600 mm circular ,14No.
5656600 mm x 450 mm rectangular,8No.
5757Planting of Trees and their Maintenance for one Year Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with\ndecayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and\nmaintaining the plants for one year150Each
5858Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.Pedestrian Crossing(2 m in length and providing
5959At as For Bt Portion604sqm
6060Providing and fixing of typical MR informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates\nof 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be\nwelded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of\nmiddle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade\nblocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by\n47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border\netc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of\nframed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure\n1700.13No.
6161Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material..59.596cum
6262Providing M15 (PCC 1:2.5:5) in foundation :-- Providing PCC M 15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 12035.924Cum.
6363Providing M20 (PCC 1:2:4) in substructure:-- Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204.67.486Cum.
6464Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry 1000 MM DIA15Rm
6565Brick masonry work in cement mortar 1:3 in parrapet excluding pointing and plastering as per drawing and technical specifications Clauses 600, 900 and 1208.46.24CUM
6666Providing M20 (PCC 1:2:4) in substructure:-- Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204.26Cum.
6767Plastering with cement mortar (1:4 ), 15 mm Thick on brick work in sub-structure as per Technical Specifications Clause 613.4 & 1204.43.52Sqm
6868Add 12.0% GST1Rupees
6969Add 1.0% Labour Cess1Rupees
7070Add Seignoirage1Rupees
7171Schedule - 2 (Maintenance)20Quaterly
7272GST @ 12% on Schedule - 2 (Maintenance)1Rupees
7373LABOUR CESS @ 1.0% on Schedule - 2 (Maintenance)\n1Rupees
7474Add Seignoirage on Maintenance1Rupees
7575GT ROAD ROHI TO BHAGHAR ROAD
7676Clearing and Grubbing Road Land (By manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of E/I2.76Hec
7777Scarifying existing Bituminous Surface\nScarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.2137.5Sqm
7878Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and\nleads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 \nlead upto 1000 m as per Technical Specification Clause 303.1.3450Cum.
7979Granular Sub-base with Well Graded Material (Table 400.1)\nConstruction of granular sub-base by providing well graded material (Crushed Stone Aggregates and Coarse Sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 401 For Grading II Material394.77Cum.
8080Water Bound Macadam with Stone screening WBM Grading 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. By Mechanical Means403.19Cum.
8181Water Bound Macadam with Stone screening WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.By Mechanical Means1090.13Cum.
8282Prime Coat (Low Porosity) Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per Technical Specification Clause 50214535Sqm.
8383Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.18334.6Sqm.
8484Patch work over WBM using Mix seal surface for bituminous and Existing CC Pavement\nProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen (i.e. 92% of standard Bitumen and 8% waste processsed plastic by weight shall be used for coating aggregate after its heating) as per IRC:SP:98-2013, to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509.739.63Sqm
8585Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes\nper hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler,\ntransporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and\nalignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH\nspecification clause No. 508 complete in all respects.439.88Cum.
8686Laying Cement Concrete Pipe NP3 (burried conduits) on first class bedding of granular material including fixing collar with cement sand drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kN as per Technical Specification Clause 412150RM
8787Ordinary Kilometer Stone (Precast)6No
8888200 m stone (precast)18No
8989Direction and Place Identification signs with size more than 0.9 sqm size boardRetro-reflectorised Traffic SignsProviding and erecting direction and place identification retro-\reflectorised sign as per IRC:67\nmade of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area\nexceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of\nproperly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per\napproved drawing and Technical Specification Clause 1701.1.92sqm
9090Road Markers/Road Stud with Lens ReflectorProviding and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense\nreflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable\nbituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.12Each
9191Road DelineatorsSupplying and installation of delineators (Road way indicators, hazard markers, object markers), 80-100 cm high above ground\nlevel, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels\nat the top, buried or pressed into the ground and conforming to IRC- 79 and the drawings.5Each
9292Portable Barricade in Construction Zone Installation of a steel portable barricade with horizontal rail 300 mm wide, 2.5 m in length fitted on a 'A' frame made with 45 x 45 x\n5 mm angle iron section, 1.5 m in height, horizontal rail painted (2 coats) with yellow and white stripes, 150 mm in width at an\nangle of 450 C, 'A' frame painted with 2 coats of yellow paint, complete as per IRC:SP:55-20015Each
9393Traffic Cone Installation of a steel portable barricade with horizontal rail 300 mm wide, 2.5 m in length fitted on a 'A' frame made with 45 x 45 x\n5 mm angle iron section, 1.5 m in height, horizontal rail painted (2 coats) with yellow and white stripes, 150 mm in width at an\nangle of 450 C, 'A' frame painted with 2 coats of yellow paint, complete as per IRC:SP:55-200130Each
9494Retro-reflectorised Traffic SignsProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens\ntype reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post\n75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450\nmm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
9595600 mm equilateral triangle12Each
9696600 mm circular ,12No.
9797600 mm x 450 mm rectangular,6No.
9898Planting of Trees and their Maintenance for one Year Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with\ndecayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and\nmaintaining the plants for one year190Each
9999Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.Pedestrian Crossing(2 m in length and providing
100100At as For Bt Portion764sqm
101101At as For CC Portion80sqm
102102Providing and fixing of typical MR informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates\nof 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be\nwelded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of\nmiddle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade\nblocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by\n47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border\netc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of\nframed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure\n1700.13No.
103103Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material..15.662cum
104104Providing M15 (PCC 1:2.5:5) in foundation :-- Providing PCC M 15 (1:2.5:5) concrete for plain concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 12032.054Cum.
105105Providing M20 (PCC 1:2:4) in substructure:-- Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204.15.165Cum.
106106Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry 600 MM DIA7.5Rm
107107Brick masonry work in cement mortar 1:3 in parrapet excluding pointing and plastering as per drawing and technical specifications Clauses 600, 900 and 1208.431.2CUM
108108Providing M20 (PCC 1:2:4) in substructure:-- Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204.130Cum.
109109Plastering with cement mortar (1:4 ), 15 mm Thick on brick work in sub-structure as per Technical Specifications Clause 613.4 & 1204.217.6Sqm
110110Add 12.0% GST1Rupees
111111Add 1.0% Labour Cess1Rupees
112112Add Seigniorage1Rupees
113113Schedule - 2 (Maintenance)20Quaterly
114114GST @ 12% on Schedule - 2 (Maintenance)1Rupees
115115LABOUR CESS @ 1.0% on Schedule - 2 (Maintenance)\n1Rupees
116116Add seigniorage on Maintenance1Rupees

AI Tender Summary

OUR REF NO 24773343
AUTHORITY Government Departments
TENDER VALUE 4.98 Crore
LAST DATE 10-07-2020
Authority
Authority Name Rural Works Department
Work Description Tender For Civil Works - Roads :-Mr-N19-20Sherghati / 14
Basic Detail
Tender No MR-N19-20Sherghati/14
Bidding Type Tender
Location
City SHERGHATI
State Bihar
Key Dates
Publish Date 02 Jul 2020
Submission Date 10 Jul 2020
Open Date 10 Jul 2020
Finance
Tender Value 4.98 Crore
Tender Fee 10000
EMD 9.97 Lakhs
Exemption Not Available
Document List
mbdNEW.pdf
BOQ_162684.xls
Tendernotice_1.pdf
7D6813AA-864E-484E-8493-0E4C47319995.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 02, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 10, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jul 10, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

mbdNEW.pdf

xls

BOQ_162684.xls

pdf

Tendernotice_1.pdf

html

7D6813AA-864E-484E-8493-0E4C47319995.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender