Public Health Engineering Department-PHED has published Supply Installation Testing And Commissioning Of Centrifugal Coupled Pump Set And Soft Starters Supply Installation Testing And Commissioning OfCentrifugal Coupled Pump Sets And Soft Starters At Various Schemes UnderSub Division Salumber On Spr Basis. Submission Date for this Tender is 06-07-2020. Industrial Drive Tenders in Salumber Rajasthan. Bidders can get complete Tender details and download the document.
| Name of Work: SITC work.of Centrifugal coupled Pumpsets , with Soft starter Panel board etc. all relevant accessories and transportation at Urben water supply scheme jaisamand salumber & 23 inroute villagae Teshil Salumber Sarada District Udaipur. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply, delivery at site with necessary packing, receiving, unloading, shifting, storing, installation, testing and commissioning of Horizontal\nCentrifugal Split Casting pumps with motor, CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts etc. complete with all respect as per the specification | 1 | ||
| 2 | 2 | (Discharge 51 to 60 LPS and head 41 to 50 M ) 54.99 LPS, 45 m Head | 2 | 1 | Nos. |
| 3 | 3 | (Discharge 51 to 60 LPS and head 61 to 70 M ) | 3 | 1 | Nos. |
| 4 | 4 | SITC of Soft Starters with panel supplied by manufacturer conforming to applicable standards with logic inputs & outputs, relay\noutputs and analogue outputs, plug in I/O connections, display of electrical parameters, state of load & operating time, RS 485 serial link for connections to Modbus. | 4 | ||
| 5 | 5 | 45 KW | 5 | 1 | Each |
| 6 | 6 | 55 KW | 6 | 1 | Each |
| 7 | 7 | Providing, lowering, laying, aligning, fixing in position in pipe line,Resilient Seated D/F DI Sluice valves of approved make & design standard of following dia complete along with pipe line as per Technical Specification & as per direction of Engineer. (Category "B" Makes / vendors other then Category "A" will be considered in category “B”). material ) including all material, labour, testing and commissioning(including jointing & jointing | 7 | ||
| 8 | 8 | 80 mm dia | 8 | 1 | No. |
| 9 | 9 | 100 mm dia | 9 | 2 | No. |
| 10 | 10 | 250 mm dia | 10 | 2 | No. |
| 11 | 11 | Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. | 11 | ||
| 12 | 12 | 50.0 Sq.mm, 3 core | 12 | 70 | Mtr |
| 13 | 13 | 70.0 Sq.mm, 3 core | 13 | 70 | Mtr |
| 14 | 14 | Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height | 14 | 1250 | kg |
| 15 | 15 | Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect. | 15 | 400 | kg |
| 16 | 16 | Supply & Installationof 3 phase ISI mark submersible moter pump set of five star rating bye BEE and is per IS 8034 -2011 (pump) and IS 9283 -2013 (moter ) or amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. the job includs lowering of moter pump installation of complete fitting and accessories , jointing of electrcal cable up to switch board, testing of submersible pump set and inter connection up to watermens comple in all respect. 7.5 KW (10 HP) and head up to120 meters ( 04 Nos.) | 16 | 30 | per kw |
| 17 | 17 | Supply & Fixing of ISI marked three core PVC flat submersible cable as per 694:1990 or amended up to date and conductor as per class5 of IS 8130 :1980 including making connection etc. | 17 | 215 | mtr. |
| 18 | 18 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventor, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter (supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 guage M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg's length 18" and double door including in built locking system.The legs should be embedded in M-15 cement concrete plat form.The size of CC plateform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440Volt AC Supply. Above 7.50 HP & up to 10.00 HP | 18 | 1 | /Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
