Supply Of Materials Under Mgnrega For Rampara_Ii Gram Panchayat In Fy 2020_21

Sharing tender

Supply Of Materials Under Mgnrega For Rampara_Ii Gram Panchayat In Fy 2020_211 Supply of 1st class picked Jhama Bricks 2 Supply of Ordinary Portland Cement 3 Supply of Stone Chips 20 mm (Down) 4 Supply of Stone Chips 40 mm (Down) 5 Hire charges of Shuttering plank (25mm-30mm thick) with Prop including all fittings 6 Supply of Stone Chips 10 mm (Down) 7 Supply of Coarse Sand 8 Supply of Medium Sand 9 Supply of Silver sand 10 Supply of Water proofing material 11 Approved quality Supply of Thermocol (12.5 mm thick) 12 Approved quality Polythene sheet (150 gm per sqm) 13 Approved quality HDPE Hypopot (300 CC) 14 Approved quality Red oxide Zinc chromate primer 15 Structural members of specified sections weighing less than -22.5 Kg./m (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964) [1) 50 x 50 x 6 mm weighing 4.5 kg per meter.2) 20 x 20 x 03 mm weighing 0.9 kg per meter 3) 25 x 25 x 05 mm weighing 1.8 kg per meter. 4)75 x 40 channel weighing 6.8 kg per mtr 5) MS patti 12 mm width weighing 0.92 kg per meter 6) MS square bar 12 mm weighing 1.25 kg per meter.] 16 Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. 17 Structural Works in Roof Trusses etc. using joists, channels and angles of specified section (conforming to IS: 226, IS: 808 & SP (6)- 1964) weighing less than 22.5 kg/ m.[1) Nominal bore 40 mm dia guage 2.9 mm weighing 3.23 kg/meter ;gauge 3.2 mm weighing 3.56 kg per meter; gauge 4.0 mm weighing 4.37 kg/meter. 2) Nominal bore 25 mm dia gauge 2.6 mm weighing 1.98 kg/m;gauge 3.2 mm weighing 2.41 kg per meter;4.0 mm weighing 2.93 kg per meter] 18 Approved quality Bamboo (8cm-10cm dia) including fixing 19 Approved quality Empty Gunny Bag 20 Approved quality R.C.C. pipes NP2 class 300 mm dia 21 Loading unloading & stacking Sand/ stone aggregate (less than 40mm nominal size) 22 Approved quality Nylon Net 23 Square or hexagonal mesh netting made with18 B.W.G.galvanised wire,fitted and fixed complete asper design(excluding the supporting frame work but including local sal wood battens of size 37.5mmx25mm) 25 mm (Bankura) 24 Approved quality Galvanised steel J or L hooks 8 mm dia 25 Approved quality Black Japan 26 Approved quality Ready mixed pink or grey primer on wood work(hard and softwood) having VOC content less than 50 gms/litre 27 Galvanised steel corrugated sheets 28 Approved quality Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots. 29 Approved quality Average rate of mild steel round bars for reinforcement TOR steel (TATA/SAIL/RINL) 30 Approved quality Other Local Wood 31 Approved quality Neem wood 32 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper 33 Vibrator (Needle type 40 mm) 34 Supply of 1 st class Brick Bats 35 Approved quality White cement 36 Approved quality ( 50 to 75 %) HDPE Agro Shade net 37 Approved quality Unslaked lime 38 Synthetic enamel paint, having VOC ( Volatile Organic Compound content less than 150 gm/liitre 39 Display Board with Brick work,Plastering,Painting & writing of Scheme details complete (1200 mm length ;1000 mm Hight above GL ; 500 mm bottom below GL ;250 mm bottom width above GL; top width 125 mm)