| 1 | 1 | Electrical Items : | | | |
|---|
| 2 | 1.01 | Limitorque Make Motor Operated Valve complete Actuator Model no. L120-10+IS, rpm : 84, Torque range : 4-7 N-m, Enclosure : IP 68, Wiring diagram no. : LED-23002M1 REV-1 Qty =1 No. | item1 | 1 | Nos |
|---|
| 3 | 1.02 | Limitorque Make Motor Operated Valve complete Actuator Model no. L120-40+IS, rpm : 60, Torque range : 16-54 N-m, Enclosure : IP 68, Wiring diagram no. : LED-23002M1 REV-1 Qty =1 No. | item2 | 1 | Nos |
|---|
| 4 | 1.03 | Limitorque Make Motor Operated Valve complete Actuator Model SMB-3+IS, rpm : 93, Torque range : 90-300 N-m, Enclosure : IP 68, Wiring diagram no. : SED-23F02R1 REV-1 Qty =1 No. | item3 | 1 | Nos |
|---|
| 5 | 1.04 | SBC card suitable for Limitorque make actuator model no. L120-10, L120-40 and SMB- 3 Qty =1 No. | item4 | 1 | Nos |
|---|
| 6 | 1.05 | Fault Diagnosing Card suitable for Limitorque make actuator model no. L120-10, L120-40 and SMB- 3 Qty =1 No. | item5 | 1 | Nos |
|---|
| 7 | 1.06 | Power Card suitable for Limitorque make actuator model no. L120-10, L120-40 Qty =1 No. | item6 | 1 | Nos |
|---|
| 8 | 1.07 | Power Card suitable for Limitorque make actuator model no. SMB- 3 Qty =1 No. | item7 | 1 | Nos |
|---|
| 9 | 1.08 | Declutch Shaft Assembly for actuator model no. L120-10, PC no. 7 Qty =1 No. | item8 | 1 | Nos |
|---|
| 10 | 1.09 | Worm Shaft Assembly for actuator model no. L120-10, PC no. 15 Qty =1 No. | item9 | 1 | Nos |
|---|
| 11 | 1.1 | Worm Shaft Gear for actuator model no. L120-10, PC no. 35 Qty =1 No. | item10 | 1 | Nos |
|---|
| 12 | 1.11 | Needle Bearing for actuator model no. L120-10, PC no. 103 Qty =2 No. | item11 | 2 | Nos |
|---|
| 13 | 1.12 | Thrust Washer for actuator model no. L120-10, PC no. 104 Qty =2 No. | item12 | 2 | Nos |
|---|
| 14 | 1.13 | Thrust Washer for actuator model no. L120-10, PC no. 105 Qty =2 No. | item13 | 2 | Nos |
|---|
| 15 | 1.14 | Seal & Gasket for actuator model no. L120-10 Qty =1 Set | item14 | 1 | Set |
|---|
| 16 | 1.15 | Declutch Shaft Assembly for actuator model no. L120-40, PC no. 7 Qty =1 No. | item15 | 1 | Nos |
|---|
| 17 | 1.16 | Worm Shaft Assembly for actuator model no. L120-40, PC no. 15 Qty =1 No. | item16 | 1 | Nos |
|---|
| 18 | 1.17 | Worm Shaft Gear for actuator model no. L120-40, PC no. 35 Qty =1 No. | item17 | 1 | Nos |
|---|
| 19 | 1.18 | W.S. Clutch Gear for actuator model no. SMB-3-150/4, PC no. 41 Qty =1 No. | item18 | 1 | Nos |
|---|
| 20 | 1.19 | Worm Shaft for actuator model no. SMB-3-150/4, PC no. 43 Qty =1 No. | item19 | 1 | Nos |
|---|
| 21 | 1.2 | W.S. Clutch for actuator model no. SMB-3-150/4, PC no. 50 Qty =1 No. | item20 | 1 | Nos |
|---|
| 22 | 1.21 | Needle Bearing for actuator model no. SMB-3-150/4, PC no. 80 Qty =1 No. | item21 | 1 | Nos |
|---|
| 23 | 1.22 | Retaining Ring for actuator model no. SMB-3-150/4, PC no. 89 Qty =1 No. | item22 | 1 | Nos |
|---|
| 24 | 1.23 | Retaining Ring for actuator model no. SMB-3-150/4, PC no. 90 Qty =1 No. | item23 | 1 | Nos |
|---|
| 25 | 1.24 | Retaining Ring for actuator model no. SMB-3-150/4, PC no. 92 Qty =1 No. | item24 | 1 | Nos |
|---|
| 26 | 1.25 | Seal & Gasket for actuator model no. SMB-3-150/4, PC no. 66,67,69,93,94,95 and 96 Qty =1 Set | item25 | 1 | Set |
|---|
