Providing Chain Link Fancing And Wall Compound And Colouring , Doors Etc . To P . H . U . At Susarda Tq . Dharni
Tender Value
8.81 Lakhs
Estimated cost
Bid Submission
06 Jul 2020
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
560
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
DHARNI → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Chain Link Fancing And Wall Compound And Colouring , Doors Etc . To P . H . U . At Susarda Tq . Dharni
BOQ
| Name of Work: Providing Chain Link Fancing and Wall Compound and Colouring, Doors Etc. to P.H.U. at Susarda Tq.Dharni | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means\n(SSR 19-20 Item No.21.02) Bd.A.1 Page No. 259 | BI01010001010000000000000515BI0100001113 | 67.27 | Cum |
| 2 | 2 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.\n(SSR 19-20 Item No.21.40) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001114 | 13.56 | Cum |
| 3 | 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 19-20 Item No.24.01) Bd. E. 1 Page No. 287 | BI01010001010000000000000515BI0100001115 | 8.22 | Cum |
| 4 | 4 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 19-20 Item No.25.11) Bd.F.3 Page No. 298 and B.7, Page No.38 | BI01010001010000000000000515BI0100001116 | 8.7 | Cum |
| 5 | 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 19-20 Item No.25.31) Bd.F.5 Page No. 300 and B.7, Page.No. 38 | BI01010001010000000000000515BI0100001117 | 3.42 | Cum |
| 6 | 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\n(SSR 19-20 Item No.25.50) Bd.F.6 Page No. 300 and B.7, Page No.38 | BI01010001010000000000000515BI0100001118 | 5.51 | Cum |
| 7 | 7 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete\n(SSR 19-20 Item No.27.05) Bd.G.5 Page No. 315 | BI01010001010000000000000515BI0100001119 | 19.04 | Cum |
| 8 | 8 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.\n(SSR 19-20 Item No.26.33) Bd.F.17, Page No. 306 | BI01010001010000000000000515BI0100001120 | 1.01 | MT |
| 9 | 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 19-20 Item No.24.16) Bd.E. 3/Page No. 288/I.S. 456 (2000) | BI01010001010000000000000515BI0100001121 | 1.83 | Cum |
| 10 | 10 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.\n(SSR 19-20 Item No.32.04) Bd. L.2 Page No. 368 | BI01010001010000000000000515BI0100001122 | 151.73 | Sqm |
| 11 | 11 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.\n(SSR 19-20 Item No.32.07) Bd.L.4 Page No. 368 | BI01010001010000000000000515BI0100001123 | 129.55 | Sqm |
| 12 | 12 | Providing groove to required size at specified location as directed by Engineer, at junction of brick masonry wall and R.C.C beams or Column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete.\n(SSR 19-20 Item No.32.37) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001125 | 43.35 | Sqm |
| 13 | 13 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge \n(SSR 19-20 Item No.6.36) MORTH 801 | BI01010001010000000000000515BI0100001126 | 1 | No |
| 14 | 14 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.\n(SSR 19-20 Item No.21.37) Bd.A.11 Page No. 263 | BI01010001010000000000000515BI0100001127 | 10.06 | Cum |
| 15 | 15 | Providing and applying two coat of Polymer based external paint of standard manufacture like Apex from Asian paints, Excel from Nerolac paints,promise from Dulux of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface etc. for specified buildings complete.(including primer coat )(Prior specific permission of S.E. shall be obtained before inclusion of this item in the estimate.)\n(NEW CSR item No.13, Page No.) As directed by Engineer- in-charge. | BI01010001010000000000000515BI0100001128 | 437.09 | Sqm |
| 16 | 16 | Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kg/Smt.\n(SSR 19-20 Item No.44.10) Bd.W.6 Page No.585 | BI01010001010000000000000515BI0100001129 | 9 | Sqm |
| 17 | 17 | Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.\n(SSR 19-20 Item No.45.29) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001130 | 36.23 | Rmt |
| 18 | 18 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand)\n(SSR 19-20 Item No.33.53) Bd. M-12 page No. 385 | BI01010001010000000000000515BI0100001131 | 4 | Sqm |
| 19 | 19 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.\n(SSR 19-20 Item No.35.21) As directed by Engineerin charge. | BI01010001010000000000000515BI0100001132 | 372.95 | Sqm |
| 20 | 20 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.\n(SSR 19-20 Item No.36.14) Bd.P.6 Page No. 414 and Pre-approval of Superintending Engineer | BI01010001010000000000000515BI0100001133 | 372.95 | Sqm |
| 21 | 21 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French\nPolish etc. complete.\n(SSR 19-20 Item No.39.09) BD-T-34 Page No. 499 | BI01010001010000000000000515BI0100001134 | 1.8 | Sqm |
| 22 | 22 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .\n(SSR 19-20 Item No.39.56) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001135 | 10.1 | Rmt |
| 23 | 23 | Providing and fixing FRP (Fiber reinforced Plastic) Door with shutter 25 to 30 mm. Thick having properties such as water proof resistantto termite resistant to mild acids and chemical. The thickness of FRP shold of 1.5 mm. With extra reinforcement to sides, edges, recess for alluminium fixtures and fastenings and commercial types as per the approved design including alluminium, fixtures and fastenings and two coats of synthetic acrylic emulsion paint etc. complete.( Excluding door frame) (for W.C. and bath doors)\n(NEW CSR item No.9, Page No.) As directed by Engineer- in-charge. | BI01010001010000000000000515BI0100001136 | 1.33 | Sqm |
| 24 | 24 | CEMENT\nStandard Consistancy, Fineness, Specific Gravity, Initial Setting Time, Final Setting Time. Compressive Strength, Soundness by Lechatelier Apparatus | BI01010001010000000000000515BI0100001137 | 1 | No |
| 25 | 25 | Bricks\nWater Absorption (Set of 5 Bricks), Compressive Strength (Set of 5 Bricks), Efflorescence ((Set of 5 Bricks) | BI01010001010000000000000515BI0100001138 | 1 | No |
| 26 | 26 | Concrete\nOne Test For C.C. M-15 (Crushing Strength) | BI01010001010000000000000515BI0100001139 | 1 | No |
| 27 | 27 | Concrete\nOne Test For R.C.C. Footing | BI01010001010000000000000515BI0100001140 | 3 | No |
| 28 | 28 | One Test For R.C.C. Column | BI01010001010000000000000515BI0100001141 | 3 | No |
| 29 | 29 | One Test For R.C.C. Beam | BI01010001010000000000000515BI0100001142 | 3 | No |
| 30 | 30 | Sand\nFineness Modulus (Sieve Analysis), Silt and Clay Content | BI01010001010000000000000515BI0100001143 | 1 | No |
| 31 | 31 | Royalty Charges | BI01010001010000000000000515BI0100001144 | 49.432 | Cum |
AI Tender Summary
Tender Timeline
Jun 29, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 07, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender