| 1 | 1 | NITROGEN: | | | |
|---|
| 2 | 1.01 | 04 X 2 Nitrogen Manifold System: 04 X 2 Nitrogen Gas Manifold System With Brass Block 38Sqmm X 65mm - 08 Nos. Pressure Gauge Block - 02Nos, Regulator \nConnecting Block - 01 No, Brass Manifold Control Valve - 02 Nos, Control Cylinder Valve - 08 Nos. MS Fabricated Support Wall Mounting Type with PP Clamp. \n | | 1 | Set |
|---|
| 3 | 1.02 | SS Double Braided Teflon Hose Both Side Extruded Quality Brass 5/8\" BSP Nut & Nipple. One Mtrs long. | | 8 | Nos |
|---|
| 4 | 1.03 | SS316 Pressure Gauge, 0 - 280 Kg/cm2, 4\" - Dial, 1/2\" Connection, With De - Greased & Calibrated. With Brass Adopter. \n | | 2 | Set |
|---|
| 5 | 1.04 | Cylinder Supporting Chain Link, (Middle Frame).\n04 Cylinder Connecting Type. \n | | 4 | Nos |
|---|
| 6 | 1.05 | Regulator: Regulator, Brass Body, Inlet: 230Bar, Outlet: l0 Bar, Make: GCE- Germany. | | 1 | No |
|---|
| 7 | 1.06 | SS Braided Teflon Hose Both Side 3/8\" SS Nut & Nipple, One Mtrs Long. | | 1 | No |
|---|
| 8 | 1.07 | SS316, 1/2\" Pipe For Nitrogen Regulator to Existing Pipe. | | 4 | Metres |
|---|
| 9 | 1.08 | SS316, Pressure Gauge, 4\" - Dial, 0 - 10 Kg/cm2, 318\" Connection, De- Greased, & Calibrated. With Connecting SS Adopters. \n | | 1 | Set |
|---|
| 10 | 1.09 | Safety Valve, Brass Set Pressure: 10 Kg/cm2, \nWith Suitable SS Adopter. \n | | 1 | Set |
|---|
| 11 | 1.1 | Regulator: Point Use Regulator, With Pressure Gauge, Wall Mounting Type, and 0.5 - 6.5Kg/cm2. Make: Janatics. | | 6 | Nos |
|---|
| 12 | 1.11 | SS Braided Teflon Hose Two Mtrs Long. \n | | 6 | Nos |
|---|
| 13 | 1.12 | Air Blow Gun. Make: Janatics. | | 6 | Nos |
|---|
| 14 | 1.13 | SS 1/4\" X 1/4\" H - Nipple | | 18 | Nos |
|---|
| 15 | 1.14 | SS 1/4\" X 1/2\" H - Nipple | | 6 | Nos |
|---|
| 16 | 1.15 | SS Braided Teflon Hose 0.250mm Long. \n | | 6 | Nos |
|---|
| 17 | 1.16 | Anger Fastener Bolt & Nuts. For Manifold & Cylinder Supporting Chain Link Fixing. | | 50 | Nos |
|---|
| 18 | 1.17 | PP Clamp With MS Fabricated Clamp. Welded Support for Nitrogen Pipe. \n | | 3 | Nos |
|---|
| 19 | 1.18 | Labour Charges for Installation of Nitrogen Gas manifold and Cylinder Supporting Chain Link, Supporting Clamps welding, Including of Consumables of Teflon Tapes, Teflon & Nylon Washers, Tools &Transport Charges | | 1 | LS |
|---|
| 20 | 2 | Compressed Dry Air (CDA) | | | |
|---|
| 21 | 2.01 | Air Line Moisture Separator, 1/2\" In & Out, and Fittings. \n | | 1 | No |
|---|
| 22 | 2.02 | Air Line Filter With Fittings. Make: Janetics. | | 1 | No |
|---|
| 23 | 2.03 | SS316, 1/2\" Pipe For Air Line, Between Compressor Drier to Existing Pipe. \n | | 8 | Metres |
|---|
| 24 | 2.04 | Regulator: Point Use Regulator, With Pressure Gauge, Wall Mounting Type, and 0.5 - 6.5Kg/cm2. Make: Janatics. \n | | 7 | Nos |
|---|
| 25 | 2.05 | PP Hose For Air Line to Regulator & Regulator to Air Gun.(2.0 +0.5) = 2.5 Mtrs Each. \n | | 7 | Nos |
|---|
| 26 | 2.06 | Air Blow Gun | | 7 | Nos |
|---|
| 27 | 2.07 | 1/4\" X 8mm One Tuch Fitting. | | 21 | Nos |
|---|
| 28 | 2.08 | 1/2\" X 8mm One Tuch Fitting. | | 7 | Nos |
|---|
| 29 | 2.09 | SS316, Pressure Gauge, 4\" - Dial, 0 - 10 Kg/cm2, 318\" Connection, De- Greased, & Calibrated. With Connecting SS Adopters. \n | | 1 | Set |
|---|
| 30 | 2.1 | Safety Valve, Brass Set Pressure: 10 Kg/cm2, With Suitable SS Adopter. \n | | 1 | Set |
|---|
| 31 | 2.11 | Labour Charges For Installation of Air Line Supporting Clamps welding, Including of Consumables of Teflon Tapes, Teflon & Nylon Washers, Tools &Transport Charges \n | | 1 | LS |
|---|
