}

Special Repair To Bldg No P-01 Offrs Mess And P-68-2 And P-68-4 Or Accn And Sr To 04 X Solar Street Light At New Mil Stn Gangtok Under Ge Gangtok, GE Gangtok-Sikkim

Military Engineer Services-MES has published Special Repair To Bldg No P-01 Offrs Mess And P-68-2 And P-68-4 Or Accn And Sr To 04 X Solar Street Light At New Mil Stn Gangtok Under Ge Gangtok. Submission Date for this Tender is 23-07-2020. Street Lighting Tenders in GE Gangtok Sikkim. Bidders can get complete Tender details and download the document.




Tender Notice

24713132
Corrigendum : Special Repair To Bldg No P-01 Offrs Mess And P-68-2 And P-68-4 Or Accn And Sr To 04 X Solar Street Light At New Mil Stn Gangtok Under Ge Gangtok
Open Tender
Indian
Sikkim
GE Gangtok
23-07-2020

Tender Details

special repair to bldg no p-01 offrs mess and p-68-2 and p-68-4 or accn and sr to 04 x solar street light at new mil stn gangtok under ge gangtok

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 16-Jul-2020 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 23-07-2020

Key Value

Document Fees
INR 500 /-
EMD
INR 54000.0 /-
Tender Value
INR 26.90 Lakhs /-

BOQ Items

Name of Work: SPL REPAIR TO BLDG NO. P-01(OFFRS MESS) & P-68/2 AND P-68/4(OR ACCN) & SR TO 04 X SOLAR STREET LIGHT AT NEW MIL STN GANGTOK UNDER GANGTOK
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed. BI01010001010000000000000515BI0100001113 116 SQUARE METRE
2 2 Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab/Blankets of any thickness, etc. including Cover Fillets of any description, complete all as specified and as directed. BI01010001010000000000000515BI0100001114 75 SQUARE METRE
3 3 Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water remove Dust, debries/ rubbish etc., complete all as specified and as directed. BI01010001010000000000000515BI0100001115 742 SQUARE METRE
4 4 M&L for 15mm thick rendering on fair faces of brick or concrete surface in CM 1:6 finishing the surface fair & even without using extra cement complete all as specified and as directed. BI01010001010000000000000515BI0100001116 343 SQUARE METRE
5 5 M&L for 15mm thick rendering on stone masonary surfaces or other than fair faces of brick work surfaces in CM 1:6 finishing the surfaces fair & even without using extra cement complete all as specified and as directed. BI01010001010000000000000515BI0100001117 268 SQUARE METRE
6 6 M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a one coat of birla super wall care putty, white or tinted as approved of required thickness complete all as specified and as directed. BI01010001010000000000000515BI0100001118 318 SQUARE METRE
7 7 M&L for complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over a one coat of birla super wall care putty, white or tinted as approved of required thickness complete all as specified and as directed. BI01010001010000000000000515BI0100001119 721 SQUARE METRE
8 8 Taking down chowkhats or frame with shutters (without taking off shutters from the frames )exc 1.5 Sqm not ext 4.0 Sqm each BI01010001010000000000000515BI0100001120 4 EACH
9 9 Taking down shutters of any description ext 1 Sqm but not exc 2 Sqm each complete all as specified and as dircted BI01010001010000000000000515BI0100001121 4 PER LEAF
10 10 Taking down shutters of any descritption n.exc 1 Sqm complete all as specified and as directed BI01010001010000000000000515BI0100001122 4 PER LEAF
11 11 S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and peg stay, complete with glazing bars, dovetailed or welded complete all as specified. BI01010001010000000000000515BI0100001123 6 SQUARE METRE
12 12 S&F 100mm mild steel butt hinges medium weight, cold rolled complete all as specified and as directed. BI01010001010000000000000515BI0100001124 42 EACH
13 13 S&F 150mm Aluminium handles, cast type, anodised complete all as specified and as directed. BI01010001010000000000000515BI0100001125 30 EACH
14 14 S&F 150mm aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and as directed. BI01010001010000000000000515BI0100001126 41 EACH
15 15 S&F 300mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete all as specified and as directed. BI01010001010000000000000515BI0100001127 4 EACH
16 16 Hacking out old glass (any thickness size quality or description) from Metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones frame complete all as specified and as directed. BI01010001010000000000000515BI0100001128 19 SQUARE METRE
17 17 S&F of 3mm thick sheet glass panes ordinary quality n.exc 0.5 Sqm each fixed to steel frame complete with oil putty in square including steel pin. BI01010001010000000000000515BI0100001129 20 SQUARE METRE
18 18 S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples and fixed, complete all as specified and as directed. BI01010001010000000000000515BI0100001130 20 SQUARE METRE
19 19 Demolition of unreinforced cement concrete of any description or in any position not otherwise specifically provided for complete all as specified and as directed BI01010001010000000000000515BI0100001131 1.5 CUBIC METRE
20 20 Demolition of reinforced cement concrete of any descritption (reinforced cut as required to facilitate demolition) any in any position not otherwise specifically provided for complete all as specified and as directed. BI01010001010000000000000515BI0100001132 0.3 CUBIC METRE
21 21 Roughing surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed. BI01010001010000000000000515BI0100001133 85 SQUARE METRE
22 22 Dismantling old PGI/CGI sheeting any gauge thicknes, including Nainital, Sikkim or similar pattern roof/facia etc complete all as specified and as directed. BI01010001010000000000000515BI0100001134 200 SQUARE METRE
23 23 Takinng down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 Sqm complete all as specified and as directed. BI01010001010000000000000515BI0100001135 8 EACH
24 24 M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone aggregate) as in plinth protection/Path/hardstanding finishing the concrete surfaces even and smooth without using extra cement complete all as specified and as directed. BI01010001010000000000000515BI0100001136 30 SQUARE METRE
25 25 M&L for non skid coloured ceramic tiles of 7 to 8mm thick (Squre/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm as in floors etc conforming to IS-13712, grade B-II - (a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed/bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed. BI01010001010000000000000515BI0100001137 62 SQUARE METRE
26 26 All as per item No. 25 here-in-above but on the vertical surface of skirting/dado including 15mm thick rendering back coat in CM (1:4) complete all as specified and as directed. BI01010001010000000000000515BI0100001138 7 SQUARE METRE
27 27 M&L for non skid coloured ceramic tiles of 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm as in floors etc conforming to IS-13712, grade B-II(a) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including cement screed bed/bedding layer of 15mm thick in cement mortar (1:6) complete all as specified and as directed. BI01010001010000000000000515BI0100001139 27 SQUARE METRE
28 28 All as per item No. 27 here-in above but on the vertical surface of skirting/dado including 15mm thick rendering back coat in CM (1:4) complete all as specified and as directed. BI01010001010000000000000515BI0100001140 2.2 SQUARE METRE
29 29 M&L for coloured glazed ceramic tiles of size (300mmx200mm/350mmx250mm/450mmx350mm) x7mm thick as in vertical surfaces such as skirting/dado/riser to steps etc conforming to IS-13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed/backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. BI01010001010000000000000515BI0100001141 97 SQUARE METRE
30 30 S&F powder coated GI snap grid frame work for false ceiling of 605x605mm size fixed to walls with rawl plugs & screws and hanged to roof with and incluidng 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 28mm x24mmx0.70mm thick, cross tee shall be 28mmx24mmx0.70mm thick and wall angle shall be 24mmx24mmx0.70mm thick conforming IS :733,737 & IS : 1285 complete all as per manufacturer's instructions as specified & directed. BI01010001010000000000000515BI0100001142 75 SQUARE METRE
31 31 Supply and fix 4mm thick Non asbestos fibre cement building board (E-board) of approved texture, for insulation and acoustic purpose of size 595x595mm size fixed with staples on snap grid as in ceiling with and including dusting of surfaces and applying two coats of oil emulstion distemper over a coat of primer including preparation of surfaces complete all as specified and as directed. BI01010001010000000000000515BI0100001143 75 SQUARE METRE
32 32 Supply and fix 0.50mm thick pre-painted galvalue aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and as directed. BI01010001010000000000000515BI0100001144 200 SQUARE METRE
33 33 Supply and fix 0.50 mm thick pre-painted galvalue aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves etc fixed with self tapping screws complete all as specified and as directed. BI01010001010000000000000515BI0100001145 20 SQUARE METRE
34 34 S&F rolled section as in main and cross beams hip, jack rafters, hollow section purlins, where connected to common rafter and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of grade Fe-410, complete all as specified and as directed. BI01010001010000000000000515BI0100001146 175 KILOGRAM
35 35 Supply and fix factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails, M.S. Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wedded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing given on Sl page No. 156 of MES schedule Part-I (2010). BI01010001010000000000000515BI0100001147 2.66 SQUARE METRE
36 36 S&F for 2nd clas hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and as directed. BI01010001010000000000000515BI0100001148 0.6 CUBIC METRE
37 37 M&L for 30mm thick 2nd class hard wood well seasoned glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutter as specified in SSR Part-I, Section 8, Clause 8.24(a) complete all as specified and as directed. BI01010001010000000000000515BI0100001149 7.5 SQUARE METRE
38 38 M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. BI01010001010000000000000515BI0100001150 53 SQUARE METRE
39 39 M&L for preparation of old or previously treated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. BI01010001010000000000000515BI0100001151 20 SQUARE METRE
40 40 M&L for preparation of old or previously treated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. BI01010001010000000000000515BI0100001152 13 CUBIC METRE
41 41 M&L for preparation of old or previously treated wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. BI01010001010000000000000515BI0100001153 22 SQUARE METRE
42 42 S&F 75mm size stainless steel butt hinges with mild steel pin BI01010001010000000000000515BI0100001154 12 EACH
43 43 S&F 110mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or fixed to wall/floor etc with necessary clamps, bolts etc complete all as specified and as directed. BI01010001010000000000000515BI0100001155 32 RUNNING METRE
44 44 S&F 110mm bore PVC(SWR) bends any radius complete all as specified and as directed. BI01010001010000000000000515BI0100001156 11 EACH
45 45 S&F 110mm bore PVC(SWR) junction (single T) equal or un-equal radius complete all as specified and as directed. BI01010001010000000000000515BI0100001157 9 EACH
46 46 Supply & fix 110mm bore PVC(SWR) vent cowl complete all as specified and as directed. BI01010001010000000000000515BI0100001158 5 EACH
47 47 Supply & fix 75mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joings laid in trenches or fixed to wall/floor etc with necessary clamps, bolts etc complete all as specified and as directed BI01010001010000000000000515BI0100001159 27 RUNNING METRE
48 48 Supply & fix 75mm bore PVC(SWR) bends any radius complete all as specified and as directed. BI01010001010000000000000515BI0100001160 6 EACH
49 49 Supply and fix in repairs 10 litre capacity low level PVC flushing cistern (white), syphonic action type, with inlet, ball valve, float, handle fixed with cast iron bracket (of suitable size) and providing 32mm dia PVC flush pipe. Make : Cera Cat No. B1010101 or equivalent approved make. BI01010001010000000000000515BI0100001161 4 EACH
50 50 S&F in repair viteous china, white colour, flat back, wash hand basin of size 55x40x79cm fixed with CI brackets, including providing 32mm dia PVC waste pipe, 32mm bore CP waste coupling and making all necessary connections complete all as specified and as directed. Make : Cera Model CORNET Cat No. 1008 or equivalent B69approved. BI01010001010000000000000515BI0100001162 2 EACH
51 51 S&F in repairs stainless steel sink with drainage board make of stainless steel 1.00mm htick for kitchen with plut, washers, waste pipe including cantilever cast iron brackets connecting union of 40mm CP waste fitting and PVC waste pipe of required length with CP/PTMT fly nuts etc complete overall size 915mm x460mm with bowl size 410mm x355mmx165mm complete all as specified and as directed. (Make : Nirali Model Elegance or equivalent approved make). BI01010001010000000000000515BI0100001163 2 EACH
52 52 M&L for rendering 15mm thick in cement mortar 1:4 using WPC @ 3% by weight of cement in finishing layer on brick or concrete surfaces finished even & smooth (WPC for finishing layer will be paid separately as supply only) BI01010001010000000000000515BI0100001164 50 SQUARE METRE
53 53 M&L for rendering 20mm thick in cement mortar 1:4 using WPC @ 3% by weight of cement in finishing layer on brick or concrete surfaces finished even & smooth (WPC for finishing layer will be paid separately as supply only) BI01010001010000000000000515BI0100001165 286 SQUARE METRE
54 54 M&L for 5mm thick rendering on fair faces of brick or concrete surface in CM 1:4 as in ceiling finishing the surfaces fair & even without using extra cement complete all as specified and as directed BI01010001010000000000000515BI0100001166 88 SQUARE METRE
55 55 Supply only integral Water Proofing Compound, conforming to IS-2465-2003 of approved make complete all as specified and as directed. BI01010001010000000000000515BI0100001167 63.09 KILOGRAM
56 56 S&F factory made steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed. BI01010001010000000000000515BI0100001168 3.6 SQUARE METRE
57 57 S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 Sqm in pane complete all as specified and as directed. BI01010001010000000000000515BI0100001169 8.5 SQUARE METRE
58 58 Material and labour for applying two coats of exterior acrylic emulsion weather proof paint over a coat of white primer including complete removal of old finish including preparation of old plastered surface complete all as specified and as directed. BI01010001010000000000000515BI0100001170 378 SQUARE METRE
59 59 M&L for preparation of newly plastered or previously untreated ceiling surfaces and applying three coats of white wash complete all as specified and as directed BI01010001010000000000000515BI0100001171 116 SQUARE METRE
60 60 M&L for complete removal of existng treatment on wall surfaces and applying two coats of white wash on wall surfaces complete all as specified and as directed. BI01010001010000000000000515BI0100001172 140 SQUARE METRE
61 61 M&L for applying one coat of white wash on plastered wall surface including preparation of old surfaces of wall complete all as specified and as directed. BI01010001010000000000000515BI0100001173 68 SQUARE METRE
62 62 M&L for applying three coats of white wash on new plastered ceiling surface including preparation of new surfces of ceiling complete all as specified and as directed. BI01010001010000000000000515BI0100001174 68 SQUARE METRE
63 63 M&L for preparation of newly plastered or previously untreated wall surfaces and applying three coats of white wash complete all as specified and as directed. BI01010001010000000000000515BI0100001175 96 SQUARE METRE
64 64 M&L for applying one coat of white wash on plastered ceiling surface including preparation of old surfaces of ceiling complete all as specified and as directed. BI01010001010000000000000515BI0100001176 308 SQUARE METRE
65 65 M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. BI01010001010000000000000515BI0100001177 30 SQUARE METRE
66 66 M&L for preparation of old or previously treated steel surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. BI01010001010000000000000515BI0100001178 25 SQUARE METRE
67 67 M&L for framed work such as grills, grating gate etc with ends of bars and plates souldered and/or revieted forged into spike, framed guard bars barred iron doors ladders framed blusters walk way, railing frame work water tanks and similar works conforming to Fe-410 or Fe-310 complete all as specified and as directed. BI01010001010000000000000515BI0100001179 112 KILOGRAM
68 68 S&F in repairs curtains rails 25mm dia, mild steel, chromium plated with and including brackets, stop roller etc complete all as specified and as directed. BI01010001010000000000000515BI0100001180 40 RUNNING METRE
69 69 M&L for APP based ploymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with ployster non wove fabric (wt. Not less than 150 gms/sqm) laid on primed surface by forced application complete including removal of existing roof treatment, roughening, cleaning and brushing of neat cement slurry all as specified and as directed and as per manufacturers instructions and duly tested for waterproof treatment. BI01010001010000000000000515BI0100001181 175 SQUARE METRE
70 70 M&L for applying a coat of bitumen primer @ 0.30 Kg/Sqm using blown bitumen on concrete surface BI01010001010000000000000515BI0100001182 175 SQUARE METRE
71 71 M&L for 50mm thick (average thickness) roof padding in PCC (1:2:4) type B0, (using 12.5 mm graded stone aggregate) mixed with approved WPC as per manufacturer's instructions complete all as specified and as directed. (Note :Waterproofing compound shall be measured and paid separately). BI01010001010000000000000515BI0100001183 175 SQUARE METRE
72 72 M&L for 30mm thick cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) for floor including finishing the surface even and rough to receive complete all as specified and as directed. BI01010001010000000000000515BI0100001184 12 SQUARE METRE
73 73 S&F of 4mm thick figured glass pin head type in square n.exc 0.5 Sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified and as directed. BI01010001010000000000000515BI0100001185 0.5 SQUARE METRE
74 74 Demolition of precast solid concrete block walling, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. BI01010001010000000000000515BI0100001186 2.2 CUBIC METRE
75 75 M&L for pre cast cement concrete block masonry with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 type C1(1:3:6) (using 20mm graded stone aggregate) as per IS-383 complete all as specified and as directed. BI01010001010000000000000515BI0100001187 2.2 CUBIC METRE
76 76 M&L for pre cast cement concrete block masonry with solid blocks, not exceeding 10 cm in width and setting in cement mortar 1:4 type C1(1:3:6) (using 20mm graded stone aggregate) as per IS-383 complete all as specified and as directed. BI01010001010000000000000515BI0100001188 5 SQUARE METRE
77 77 Supply & fix mild steel flat iron bent to shape, holes drilled etc complete as in wind ties or as in hold fast, clamps, supports for rainwater, ventilating pipes, including bolts, if required, hooks (stay) etc and similar small articles conforming to Fe-290 Gde-E-165 including one coat of red oxide primer complete all as specified and as directed. BI01010001010000000000000515BI0100001189 30 KILOGRAM
78 78 S&F in vitreous china wash down water closet semi-pedestal pattern(angle Indian type) white with all fittings fixed as in repairs (excluding flushing cistern) CP flush pipe 32mm dia including plastic water closet seat , black closed pattern with flat bottom and cover and MS CP aluminium/PVC hinging device complete all as specified and as directed. Make : Parryware Code No. C-0272 universal 'P'' tap and C-8131 universal of parrywae seat cover or equivalent approved make. BI01010001010000000000000515BI0100001190 4 EACH
79 79 Supply and fix in repairs vitreous china, white colour, flat back, wash hand basin of size 55 x 40 x 79 cm fixed with brackets, including providing 32mm bore CP waste coupling and making all necessary connections complete as specified and as directed. BI01010001010000000000000515BI0100001191 4 EACH
80 80 S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. BI01010001010000000000000515BI0100001192 12 EACH
81 81 S&F in repairs 15mm bore stop cock, cast copper alloy, chromium plated with long shank and cut (concealed type), screwed down, screwed for Iron pipe or union and fixed in repair complete as specified and as directed. \nMake - Jaquar continental series CAT No. ALD-087 FT & CON-087FTK or equivalent approved make. BI01010001010000000000000515BI0100001193 7 EACH
82 82 Supply & fix in repair 15mm bore dia angular stop cocks, chromium plated, with wall flange screwed down, screwed from iron pipe or union and complete all as specified and as directed. Make : Jaquar Code- CON 059 KN of equivalent approved make. BI01010001010000000000000515BI0100001194 10 EACH
83 83 Supply & fix in repair Bib tap, long body cast copper alloy, chromium plated with crutch or butterly handle, screwed down for 15mm bore GI pipe or for brass ferrule including taking down old unserviceable one. Make : Jaquar Code : CON -107 KN or equivalent approved make. BI01010001010000000000000515BI0100001195 11 EACH
84 84 S&F in repairs 15mm bore pillar taps, fancy type with long neck with aerator cast copper alloy with capstan head chromium plated, screwed down, high pressure with long screwed shanks, fly-nuts with screwed for GI pipe complete all as specified and as directed. Make : Jaquar Code CON-CHR-021 KN or equivalent approved make. BI01010001010000000000000515BI0100001196 5 EACH
85 85 Supply & fix in repair tubular towel rail 20mm dia 'D' type, 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. BI01010001010000000000000515BI0100001197 4 EACH
86 86 Taking up or down 15mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complee all as specified and as directed. BI01010001010000000000000515BI0100001198 70 RUNNING METRE
87 87 Supply and fix galvanised steel water tubing 15mm bore dia, medium grade with all fittings and fixed complete to wall/ceiling or laid in floors complete all as specified and as directed. BI01010001010000000000000515BI0100001199 45 RUNNING METRE
88 88 Refixing 15mm bore GI tubing and connection in new or old position (Walls, ceiling and floor etc) including all fittings complete all as specified and as directed. BI01010001010000000000000515BI0100001200 15 RUNNING METRE
89 89 Material & labour for cutting into existing manholes for connecting new drains (internal dia pipe 110mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching complete all as specified and as directed. BI01010001010000000000000515BI0100001201 1 EACH PIPE
90 90 M&L for PCC 1:4:8 type C-2 (by using 40mm graded stone aggregae) as in bed to drain pipes 100mm bore, including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed. BI01010001010000000000000515BI0100001202 15 RUNNING METRE
91 91 M&L for mild steel TMT bars, 10mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooping for columns, hookings ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. BI01010001010000000000000515BI0100001203 78 KILOGRAM
92 92 M&L for mild steel TMT bars, 6mm to 8mm dia as in stirrups, spacers and binders cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. BI01010001010000000000000515BI0100001204 76 KILOGRAM
93 93 M&L for formworks to sides and soffits of floor, roof beam, beam haunching, girders, bressummers, lintels, cantilever shelves including support overhangs etc also splays between floor and beam etc complete all as specified and as directed. BI01010001010000000000000515BI0100001205 8 SQUARE METRE
94 94 M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal/slopping) receive for fair finished surfaces complete all as specified and as directed. BI01010001010000000000000515BI0100001206 4 SQUARE METRE
95 95 M&L for reinforced cement concrete (nominal mix) 1:2:4 type B0 (using 12.5mm graded stone aggregate) for Chajjas complete all as specified and as directed. BI01010001010000000000000515BI0100001207 0.5 CUBIC METRE
96 96 M&L for RCC 1:2:4 type B-1(using20mm graded stone aggregate) as in slabs supported and the like complete all as specified and as directed. BI01010001010000000000000515BI0100001208 0.3 CUBIC METRE
97 97 S&F CI Nahani trap, 100mm diameter of outlet with gratings, including jointing to waste pipe fixed in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed. BI01010001010000000000000515BI0100001209 3 EACH
98 98 S&F PVC floor trap, 75mm diameter of outlet, with gratings, including jointing to waste pipe fixed in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed. BI01010001010000000000000515BI0100001210 6 EACH
99 99 Supply & fix PVC floor trap, 100mm diameter of outlet, with gratngs, including jointing to waste pipe fixed in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed. BI01010001010000000000000515BI0100001211 1 EACH
100 100 Supply and fix in repairs Central hole hot & cold water basin mixer chromium plated suitable for 15mm bore pipe complete all as specified and as directed. Make : ESSCO Cat No. MQT-S16AKN or equivalent of approved make. BI01010001010000000000000515BI0100001212 2 EACH
101 101 Supply and fix in repairs health faucet ABS body with 1.2 mtr complete all as specified and as directed. \nMake : ESSCO CAT No. ALE-IVY-583 or equivalent approved make. BI01010001010000000000000515BI0100001213 2 EACH
102 102 S&F 35mm thick flush door shutter, solid core construction, with block board core and plywood face panels, commerical type on one side and other face covered with decorative face veneer with 6mm thick teak wood lipping/frame to match complete all as specified and as directed. BI01010001010000000000000515BI0100001214 3.5 SQUARE METRE
103 103 S&F of factory made solid PVC door frame of size 50mm x47mm made out of 5mm thick single side prelaminated PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelaminated sheet as per specification and drawing given on Sl page No.160 of MES schedule Part-II (2010) complee all as specified and as directed. BI01010001010000000000000515BI0100001215 28.2 RUNNING METRE
104 104 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded wood grain finished colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lcok rail & bottom rail on either side & as gap insert for top rail & bottom rail panel will be of wire gauze in lieu of wood grain PVC sheet panel. The wire gauze shall be wraped on an additional square 8mm MS solid tube and this tube will be welded to MS tubes. The wire gauge shall be stretched to tighten firmly and all as per specification and as per drawing on Sl Page No. 159 of SSR Part II. BI01010001010000000000000515BI0100001216 6 SQUARE METRE
105 105 S&F of factory made solid PVC double door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with MS Square tube complete all as per specification and drawing given on MES Schedule Part-II (2010) on page No. 160 complete ll as specified and as directed. BI01010001010000000000000515BI0100001217 9.8 RUNNING METRE
106 106 S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded prelaminated wood grain PVC sheet on the front face & 2mm plain colour PVC sheet on back face and drawing given on MES schedule part-II (2010) on Page no. 161 complete all as specified and as directed. BI01010001010000000000000515BI0100001218 3.32 SQUARE METRE
107 107 Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded wood grain finished colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail panel will be of wire gauze in lieu of wood grain PVC sheet panel. The wire gauze shall be wrapped on additional square 8mm MS solid tube and this tube will be welded to MS tube. The wire gauge shall be stretched to tighten firmly and all as per specification and as specified and as per drawing on Sl page No 159 of SSR Part II. BI01010001010000000000000515BI0100001219 3.32 SQUARE METRE
108 108 Supply and fixing floor door stopper with overall length of cover plate 140mm, aluminium alloy anodized with rubber at bottom of required size in each door with screws etc complete all as specified and as directed. BI01010001010000000000000515BI0100001220 10 EACH
109 109 Cutting holes in stone wall built in cement mortar or in cement lime mortar for inserting holdfast/purlin/rafter etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick wall but n.exc one brick complete all as specified and as directed. BI01010001010000000000000515BI0100001221 15 EACH
110 110 S&F in repairsof 12mm thick block boards grade-2 quality interior grade, commercial type including teakwood lipping 6mm thick all round fixed with nails to timber frame work complete all as specified and as directed. BI01010001010000000000000515BI0100001222 7.5 SQUARE METRE
111 111 S&F in repair 18/19mm thick block board grade 2 quality with decorative face veneers on one face fixed with screws to timber frame work as in repair including teak wood lipping 6mm thick all round fixed with nails complete all as specified and as directed. BI01010001010000000000000515BI0100001223 15 SQUARE METRE
112 112 Material and labour for 2nd class hard wood plain fillets, square rectangular or triangular in section clean sawn, secured with screws exc 13 & n.exc 25 Sqcm including necessary groove cutting and making good in CM 1:3 complete all as specified and as directed. BI01010001010000000000000515BI0100001224 20 RUNNING METRE
113 113 S&F butt hinges brass with mild steel hinge pin bright polished of size 75mm long complete all as specified and as directed. BI01010001010000000000000515BI0100001225 15 EACH
114 114 S&F brass hasp and staple, safety type brass with mild steel hinges pin including bolt to hinge plate and fixed with screws with 100mm long. BI01010001010000000000000515BI0100001226 10 EACH
115 115 S&F brass handle cast type polished bright 100mm size complete all as specified and as directed. BI01010001010000000000000515BI0100001227 8 EACH
116 116 S&F bevelled edge looking mirror of size 600mmx450mmx5mm thick with selected quality modiguard glass, decorative type with aluminium channel frame, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers including glass self assembly complete all as specified and as directed. BI01010001010000000000000515BI0100001228 2 EACH
117 117 Demolition of AC pipe any dia complete all as specified and as directed. BI01010001010000000000000515BI0100001229 35 RUNNING METRE
118 118 Supply and installation solar all-in-one street lighting with smart integrated solar street light with built in mono crystalline solar panel, lithium Ferro phospate (LifeP04) battery, MPPT charge controller and PIR sensor with colour temperature range 6000-6500K of power rating 20 watt, panel capacity 50Wp and battery capacity 24 Ah, with autonomy of 2 days completed fixed in existing solar street light poles complete all as specified and as directed by engineer in charge including taking down old unserviceable one. Make : Havells Cat No. LHSTAKU7CBAF020 or equivalent approved make. BI01010001010000000000000515BI0100001231 4 EACH JOB
119 119 Taking down carefully poing wiring of any type (i.e on wooden batten, surface conduit, casing & caping or concealed conduit) complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric light fittings, holder, switches, sockets, regulators, wooden batten, conduit etc including accessories such as wooden gutties/rawl plug, screw etc incluidng making good disturbed surface to match the existing surface all as specified and as directed. BI01010001010000000000000515BI0100001232 149 PER POINT
120 120 M&L for point wiring with 1.5 Sqmm (FRLS) PVC insulated, single core, unsheathed, multi stranded 1100 volts grade conforming to IS-694 Pt-I & II of 2000, copper conductor cable drawn through and including 25mm size PVC rigid non metalic casing caping (Double lock) with all casing capping fittings & accessories (ISI) marked on roof, ceiling wall etc with and including continous 1.5 Sqmm (FRLS) PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly for one light/exhaust fan point controlled by one, one way switch and includng metal sheet enclosure rectangular terminal boxes of suitable size and modular white cover plates suitable for mounting modular switches, sockets etc all as specified and as directed. Note : Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. BI01010001010000000000000515BI0100001233 64 PER POINT
121 121 All as per item Sl No. 120 here in before but for on call bell point controlled by one bell push BI01010001010000000000000515BI0100001234 8 PER POINT
122 122 All as per item Sl No. 120 here in before but for one 3 pin 5 amps switch outlet point on independt boad. BI01010001010000000000000515BI0100001235 26 PER POINT
123 123 All as per item Sl No. 120 here in before but wiring with 2.5 Sqmm (FRLS) multistranded cable and earth wire with copper conductor of size 2.5 Sqmm (FRLS) for 15 amps power point BI01010001010000000000000515BI0100001236 18 PER POINT
124 124 All as per item Sl No. 120 here in before but wiring with 4 Sqmm(FRLS) multistranded cable and earth wire copper conductor of size 4 Sqmm (FRLS) for metal clad socket. BI01010001010000000000000515BI0100001237 6 PER POINT
125 125 Supply and fix Modular switch 1 way 6 A, 1 module 230 volts, 50 Hz, ISI marked all as specified and as directed. \n(Make : Havells CAT No. AHFSXXW101 or equivalent/approved) BI01010001010000000000000515BI0100001238 90 EACH
126 126 Supply and fix socket, 6A,2/3 pin combined 2 module 230 volts, 50 Hz, ISI marked complete all as specified and as directed. (Make : Havells Cat No. AHFKPXW065) BI01010001010000000000000515BI0100001239 26 EACH
127 127 Supply and fix Modular switch 1 way 16A, 1 module 230 volts, 50Hz, ISI marked complete all as specified and as directed. (Make : Havells Cat No. AHFSXXW161 or equivalent approved ) BI01010001010000000000000515BI0100001240 18 EACH
128 128 Supply and fix socket, 6A/16A-2/3 pin combined 2 module 230 volts, 50 Hz, ISI marked complete all as specified and as directed. (Make : Havells Cat No. AHFKCXW163 or equivalent approved) BI01010001010000000000000515BI0100001241 18 EACH
129 129 Supply and fix Modular Bell push 6A 1 module 230 volts, 50 Hz, ISI marked complete all as specified and as directed. (Make : Havells Cat No.AHFSBXW101or equivalent approved). BI01010001010000000000000515BI0100001242 8 EACH
130 130 Supply and fix Bell, AC 230 volts, single pole complete all as specified and as directed. (Make : Havells Cat No. RHYTHM-Multitune Doorbell SAP Code-AHOLXXW000 or equivalent approved). BI01010001010000000000000515BI0100001243 10 EACH
131 131 Supply and fixing ceiling rose, three terminals, 230 volt(ISI marked) surface bakelite suitable for batten fittting complete all as specified and as directed. (Make : Havells CAT No. AHLHXCW000 or equivalent approved ). BI01010001010000000000000515BI0100001244 52 EACH
132 132 Supply and fix LED wall light along with fixture, 20 Watts with suitable fixing arrangements complete including 01 No. LED lamp E27 Cap with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. (Make : Havells CAT No. LHEXBYPNIN1W020 or equivalent approved ). BI01010001010000000000000515BI0100001245 20 EACH
133 133 Supply & fix colour changing LED tube light batten 20 watts with options of 3000 K, 4000 K & 6500 K, all in one fixture with suitable fixing arrangements complete with all accessories internally prewired and including connecting up with and incluidng twin core twisted flexible copper conductor cable of suitable size all as specified and as directed. (Make : Havells Cat No. LHEXBYPNIN1W020 or equivalent approved). BI01010001010000000000000515BI0100001246 32 EACH
134 134 Supply & fix LED Mirror light along with mixture, 5 watts with suitable fixing arrangements complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. (Make : Havells CAT no. LHEXBLP717N1W005 or equivalent approved). BI01010001010000000000000515BI0100001247 6 EACH
135 135 S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 16 Amps complete all as specified and as directed. (Make : Havells Cat No. DHDPUSN020/DHDPUDP020 or equivalent approved ) BI01010001010000000000000515BI0100001248 6 EACH
136 136 S&F MCB DB, VTPN 8 way (i.e MCCB + 24), double door with one incommer MCCB 63 A TPN 415 volts 16KA, with 200 A bus bar and separate link for common link for neutral and earth, complete all as specified and as directed. \nNote :-\n(a) Cost of MCCB is deemed to be included in unit rate. \n(b) Blank spaces of DB shall be covered with blank plate.\nVTPN DB- (Make : Havells Cat No. DHDLVDRWGOFO08 or equivalent approved make)\nMCCB- (Make : Havells Cat No. IHLGNF0063 or equivalent approved). BI01010001010000000000000515BI0100001249 1 EACH
137 137 S&F sheet metal enclosure DB''s 240 volts, IP-43, suitable for mounting MCB's, SPN, 8 Way with 200 Amps rated copper bus bar double door type complete all as specified and as directed. \n(Make : Havells Cat No. DHDPSHODRW08 or equivalent approved) BI01010001010000000000000515BI0100001250 15 EACH
138 138 S&F MCB single pole & neutral 40 to 63 Amps, 240 volts, 10 KA rapturing capacity, 'C' curve complete all as specified and as directed. (Make : Havell CAT No. DHMGCSN F040-063 or equivalent approved). BI01010001010000000000000515BI0100001251 9 EACH
139 139 S&F MCB single pole 6 to 32 Amps, 240 volts, 10 KA rapturing capacity, ''C'' curve complete all as specified and as directed. (Make : Havells CAT No. DHMGBSPF006-032 or equivalent approved) BI01010001010000000000000515BI0100001252 54 EACH
140 140 S&F RCBO/RCCB for earth leakage, overload & short-circuit protection, double pole, 40 A, sensitivity 300 MA, 10 KA, ISI marked incl indication of fault protection complete all as specified and as directed. Make : Havells Cat No. DHCEACSN2300040 or equivalent approved. BI01010001010000000000000515BI0100001253 2 EACH
141 141 M&L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable of working voltage 1100 volts grade conforming to IS-694 Part-I & II of 2000 drawn in and including suitable size non metallic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed with all fittings & accessories with 1.60mm thick pressed steel or mild steel sheet sunk box covered with 3mm thick backelite sheet fixed with brass screws & cup washers including 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continiuity conductor connected to main switch/DB's or common earth dolly complete for light point/fan point/exhaust fan point/ call bell point/controlled by one switch 5/6 Amp one way complete all as specified and directed. Note- (i) quoted rate shall include chase cutting, making good to the distrubed surfaces including plastering and painting to match with the existing colour. (ii) Red coloured cable shall be used for live connection, black coloured cbale shall be used for neutral connection and green coloured cable shall be used for earhting. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. BI01010001010000000000000515BI0100001254 26 PER POINT
142 142 All as per item No. 141 here-in-before but for one switch socket outlet point 5/6 Amps on same board. BI01010001010000000000000515BI0100001255 6 PER POINT
143 143 All as per item No. 141 here-in-before but for one socket outlet 3 Pin 5 Amps on independent board. BI01010001010000000000000515BI0100001256 6 PER POINT
144 144 All as per item No. 141 here-in-before but for one light point controlled by 2-way switches 5/6 Amps BI01010001010000000000000515BI0100001257 1 PER POINT
145 145 All as per item No. 141 here-in-before but for on socket outlet/metal clad socket of 15 Amps fixed on independent board with 2.5 Sqmm multistranded copper conductor wire FRLS PVC insulated and 2.5 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete all as specified and as directed. BI01010001010000000000000515BI0100001258 6 PER POINT
146 146 S&F switch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as specified and as directed.\nMake : Anchor Product Code No. 50053 or equivalent approved. BI01010001010000000000000515BI0100001259 24 EACH
147 147 S&F in repairs switch piano flush button, single pole, two way, 6 amps complete all as specified and as directed. Make : Anchor product Code No. 50064 or equivalent approved. BI01010001010000000000000515BI0100001260 1 EACH
148 148 S&F Bell push, flush type, 6 Amps, 240 volts ISI marked complete all as specified and as directed. Make : Anchor product Code No. 50075 or equivalent approved. BI01010001010000000000000515BI0100001261 2 EACH
149 149 S&F switch socket combination, 2 and 3 pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as specified and as directed. Make : product Code No. 4056/50483 or equivalent approved. BI01010001010000000000000515BI0100001262 12 EACH
150 150 S&F switch socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as specified and as directed. Make : Anchor Cat no. 38808/50665 or equivalent approved. BI01010001010000000000000515BI0100001263 6 EACH
151 151 S&F lamp holder angular/straight insulated body, with back plate suitable for batten fittings, white/ivory finish complete all as specified and as directed. Make : Anchor product Code no. 39527 or equivalent approved. BI01010001010000000000000515BI0100001264 16 EACH
152 152 S&F LED light fitting 1 x 18 W(4 FT), CRI >=80, CT>=5700K, wall/surface mounted, integrated type, constructed of fire retardant engineering grade extruded plastic & decorative end caps with integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/watt, power factor >/0.90, operating range- 140 to 270V, 50 Hz fixed with suitable fixing arrangements complete including 01 No. 18 W (4 FT) LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size all as specified and as directed. (Make : Havells CAT No. REGALBATTEN8UPTO1X22WSSBSWH and tube light Cat No. TITANIANEO1213T8SSTL18WLED865SPC or equivalent approved. BI01010001010000000000000515BI0100001265 8 EACh
153 153 S&F exhaust fan 250mm sweep, 1400 RPM, 240 volt, AC 50 Hz, PVC body, including louvers with and including cutting bricks/stone boulders wall for fixing of fan and finished the cutting surface even and smooth by using cement mortar complete all as specified and as directed. (Make : Havells Ventil Air - DX White or equivalent approved. BI01010001010000000000000515BI0100001266 4 EACH
154 154 Material and labour for concealed sub main wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories suitable size with and including 6 Sqmm (FRLS) copper green colour earth wire all as specified and directed. NOTE- Two run of 6 Sqmm & One run of 6 Sqmm & One run of PVC conduit with accessories shall be measured as One length. Note- (i) Quoted rate shall include chase cutting, making good to the disturbed surfaces including plastering and painting to match with the existing colour. BI01010001010000000000000515BI0100001267 110 RUNNING METRE
155 155 Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected with galvanised iron/steel earth wire of 4mm dia by means of bolts, nuts, check nuts and washers made outof galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to VTPN DB/SPN DB including neccessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2;4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS hook 6mm dia MS bars etc complete all as specified and as directed including testing on completion. BI01010001010000000000000515BI0100001268 3 EACH
156 156 Taking down exhaust fan of any type 250/300mm from its location and kept in safe custody and refix the same after finishing of ceiling work, painting the fan complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and as directed. BI01010001010000000000000515BI0100001269 6 EACH
157 157 Taking down split AC/window AC of any capacity (indoor and outdoor unit) including copper tubes and acessories and kept in safe custody and refix the same at the same location after finishing of B/R work and set for working conditions complete all as specified and as directed. BI01010001010000000000000515BI0100001270 6 EACH
158 158 Taking down existing geyser 25 Ltrs capacity and keeping in safe custody and refixing in new or old position complete after repair works including replacing hot & cold PVC connection pipe s(01 No. each) etc complete all as specified and as directed. BI01010001010000000000000515BI0100001271 2 EACH JOB
159 159 Supply & fixing rotational moulded polythene water storage tank 500 Ltrs capacity, ISI marked multi multilayer construction (cylindrical vertical with closed top) hoisted & fixed in position including supply and fixing of 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 455 gms including connection complete all as specified and as directed and taking down old unserviceable/broken one. BI01010001010000000000000515BI0100001272 2 EACH
160 160 M&L for 25mm bore steel tubing medium grade galvanised with all fitting fixed complete to walls and ceiling or floor complete all as specified and as directed including taking down old unservicable one. BI01010001010000000000000515BI0100001273 10 RUNNING METRE
161 161 Supply & fix 25mm bore Gun metal valves, ISI marked with iron wheel head screwed both ends for GI pipe complete all as specified and as directed including taking down old one. BI01010001010000000000000515BI0100001274 2 EACH
162 162 S&F in repairs bell ding dong, AC single pole 220/240 volts white/ivory finish, surface type complete all as specified and as directed. Make : Anchor product code No. 8272 or equivalent approved. BI01010001010000000000000515BI0100001275 2 EACH
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail