| 1 | 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm complete all as specified and directed. | | 20 | Each |
|---|
| 2 | 2 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed. | | 20 | Each |
|---|
| 3 | 3 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.00 Sqm complete all as specified and directed | | 30 | Each |
|---|
| 4 | 4 | Taking down chowkats or frames with shutters exc. 1.00 Sqm but not exceeding 2.00 sqm complete all as specified and directed | | 20 | Each |
|---|
| 5 | 5 | Supply and fix 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. \n(Species :Tita Champ/Bonsum/Hollok or equivelent as approved by E in C). | | 1.5 | Cum |
|---|
| 6 | 6 | Supply and fixing 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glasses complete all as specified and directed. (Species :Tita Champ/Bonsum/Hollok/sal or equivelent as approved by E in C). | | 30 | SQM |
|---|
| 7 | 7 | Supply and fixing 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred and rebuted sash bars of any numbers as in doors orovided with stiles and rails complete all as specified and directed. (Species :TitaChampa/Bonsum/Hollok/sal or equivelent as approved by E in C). | | 20 | SQM |
|---|
| 8 | 8 | Supply and fixing 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred and rebuted sash bars of any numbers as in doors orovided with stiles and rails complete all as specified and directed. (Species :TitaChampa/Bonsum/Hollok/sal or equivelent as approved by E in C). | | 25 | Sqm |
|---|
| 9 | 9 | Supply and fix 2nd class hard wood plain framed panelled shutters 35 mm thick (any number of panels) with panels of timber flat on both sides,( feather edged )or of veneered particle board medium density, wood particle board with commercial face veneer including fitted to chowkats complete all as specified and directed.(Species :TitaChampa/Bonsum/Hollok/sal or equivelent as approved by E in C). | | 8 | Sqm |
|---|
| 10 | 10 | Supply and fix for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. | | 30 | sqm |
|---|
| 11 | 11 | Supply and fix Aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and directed.\nMake :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used. | | 80 | Each |
|---|
| 12 | 12 | Supply and fix Aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed.\nMake :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used. | | 120 | Each |
|---|
| 13 | 13 | Supply and fix 150 mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.\nMake :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used. | | 80 | Each |
|---|
| 14 | 14 | Supply and fix 100 mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.\nMake :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used. | | 80 | Each |
|---|
| 15 | 15 | Supply and fix 100 mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed.\nMake :- Mowjee or equivalent ISI Marked fitting to be used. | | 90 | Each |
|---|
| 16 | 16 | Supply and fix 75 mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed.\nMake :- Mowjee or equivalent ISI Marked fitting to be used. | | 150 | Each |
|---|
| 17 | 17 | Supply and fix aluminium alloy, anodised, sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.\nMake :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used. | | 20 | Each |
|---|
| 18 | 18 | Material and labour for preparation of wooden or wood based material over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.\nMake:- Berger Luxol HI Gloss/Borolac (J&N) /Nerolac/Asian paints Apcolite/Superlac (Shalimar)/Dulux or equivalent. | | 150 | SQM |
|---|
| 19 | 19 | Material and labour for preparation of old steel/iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. Make:- Berger Luxol HI Gloss/Borolac (J&N) /Nerolac/Asian paints Apcolite/Superlac (Shalimar)/Dulux or equivalent. | | 50 | SQM |
|---|
| 20 | 20 | Supply and fix 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane including oil putty and bedding complete fitting complete all as specified and directed.\nMake :- Saint Gobin/Modi float/Triveni float glass/hindustan pilkington or equivalent ISI Marked | | 18 | Sqm |
|---|
| 21 | 21 | Supply and fix in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.14mm and fixed with stainless steel wire staples complete all as specified and directed. | | 90 | Sqm |
|---|
| 22 | 22 | Supply and fix in Welded steel wire fabric supplied and fixed with nails or screw etc in FI complete to wood or steel members Weight not exceeding 4 Kg per square metre complete all as specified and directed. | | 20 | Kg |
|---|
| 23 | 23 | S & F mild steel framed work such as grill, grating with end of bar and or riveted,framed guard bars, barred iron doors,window, ladders, railing, framed work for water tank , small articles as hold fast, wall ties hooks, ans similar small articles confirming Fe 290-0 Gde E 165 complete all as specified and directed | | 90 | kg |
|---|
| 24 | 24 | Material & Labour for PCC 1:3:6 type C2 (using 20 mm graded stone aggregate) as in fixing of hold fast of chowkats complete all as specified and directed. | | 0.5 | CUM |
|---|
| 25 | 25 | Demolition of cement concrete(unreinforced) in ground floors n.exc 15 cm thickness (below or above ground level) including removing rubbish off the premises complete all as specified and directed. | | 1 | CUM |
|---|
| 26 | 26 | Material and labour for 75mm thick for PCC 1:3:6 type C-2 ( using 40mm graded crushed stone aggregate) finished even and smooth without using extra cement as in plinth protection etc | | 60 | Sqm |
|---|
| 27 | 27 | Material and labour for 100mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in hardstanding complete all as specified and directed. | | 50 | Sqm |
|---|
| 28 | 28 | Supply and fixing of pre polished PCC tiles of thickness of 20-25 mm irrespective of any shape and size laid over 20mm thick CM 1:6 etc complete all as specified and directed. (Make: Kajaria/ Johnson/ Somany) | | 50 | Sqm |
|---|
| 29 | 29 | Supply and fix 2nd calss hard wood small fitting such as brackets of any type, latch and hinge blocks, shaped door and window stops and including all necessary labours, articles nexc. 200 cub cm each like complete all as specified and directed. | | 50 | Each |
|---|
| 30 | 30 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness as in roof coverings any thickness complete all as specified and directed. | | 50 | Sqm |
|---|
| 31 | 31 | S&F prepainted galvalume aluminium Zine coating GI based corrugated steel sheet 0.50 mm thick of an coloured having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as per manufacture instruction complete all as specified and directed. | | 50 | Sqm |
|---|
| 32 | 32 | M/L prepainted galvalume aluminium Zine coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in ridge fixed with self tapping screw as specified. | | 5 | Sqm |
|---|
| 33 | 33 | M&L for 5.50 mm thick glass, selected quality, fixed inside the aluminium frame in squares n exc 0.5 sqm in each pane complete all as directed by Engineer-in-Charge. | | 6 | Sqm |
|---|
| 34 | 34 | S&F aluminium anodised frame for doors, windows powder coated (min thickness 50 microns) complete all as specifed and directed | | 42 | Kg |
|---|
| 35 | 35 | S&F Aluminium anodised powder coated door shutters aluminium section weighing 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading, screws etc complete all as specifed and directed | | 6 | Sqm |
|---|
| 36 | 36 | S&F Aluminium anodised powder coated window shutter, fixed type without sash bar, alumn section section weighing 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,incl suitable locking systems etc complete all as specifed and directed | | 5 | Sqm |
|---|
| 37 | 37 | S & F in repairs 12mm thick pre-laminated particle board fixed in repair interrior grade pre-laminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame as in kitchen cabinet complete all as specified and as directed. Make: Century/ Green Ply or equivalent as per E-in-C. | | 20 | Sqm |
|---|
| 38 | 38 | Material and labour for PCC 1:2:4 type B1 using 20mm graded stone agg as in lintel, plinth course, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates ,roof padding etc finished even and fair complete all as specified and directed. | | 100 | Cum |
|---|
| 39 | 39 | Taking down cement plaster including raking out joints,hacking for key,scrubbing down with water etc compleate all as specified and directed. | | 100 | SQM |
|---|
| 40 | 40 | Material & Labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement. | | 50 | Sqm |
|---|
| 41 | 41 | Material & Labour for 15 mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces and finishing the surface even and smooth without using extra cement mixed. | | 50 | Sqm |
|---|
| 42 | 42 | Material & Labour for preparation of new plastered surfaces of walls and priming with chalk whitening on plastered surface and applying two coat of oil emulsion distemper complete all as specified and as directed. | | 50 | Sqm |
|---|
| 43 | 43 | Material and labour for applying two coats of cement based paint over a coat of external wall on new plastered surfaces including preparation of new wall surface complete all as specified and as directed. | | 50 | Sqm |
|---|
