Non Motorized Light Weight Equipment For Inspection.-Assam

Supply Of , Manufacture And Supply Of Non Motorized Light Weight Equipment For Inspection. It Shall Be Sturdy And Robust In Design, Light Weight And Easily Dismantle-Able To Load On Brake-Van/Slr For Shifting From One Station To Other. The Equipment Shall Run By Pushing The Same From Back Side With The Help Of Two Detachable Handles. The Equipment Shall Be Light In Weight So That Four Persons Can Easily Lift The Equipment And Make It Off The Track On The Face Of An Approaching Train. I. Nominal Gauge : 1676 Mm Ii. Wheel Dia. (At Tread) : 400 Mm Iii. Wheel Base : 900-1000 Mm (Approx) Iv. Wheel Thickness (Average) At Tread : 6 Mm V. Flange Thickness(Average) : 9 Mm Vi. Pay Load Capacity : 0.7 Ton (Min.) Vii. No. Of Spokes : 4 Viii. Seating Capacity : 3 Persons At Front. Wheel: The Wheels Shall Be Made Of Cast Steel Or Any Other Suitable Material Having Sufficient Mechanical Strength Intended For. Axle: The Axles Shall Be Made Hollow By Using Heavy Grade Steel Pipes Of Nominal Bore 32 Mm Conforming To Is: 1239-1992. The Solid Portion Of The Axles At Both End (Where Wheels Are To Be Fitted) Shall Be Made Of Class 3 Steel Of Is: 1875. Frame: The Frame Shall Be Made Of Seamless Steel Extruded Section (Rectangular). Alternatively Aluminium Extrusion Conforming To Grade-Ii (W Condition) Of Is: 7428-1974 (Reaffirmed-2001) May Be Used. Detachable Seating Arrangement: Good Quality Moulded Plastic/Equivalent Or Superior Material Shall Be Used For The Seat. Each Seat Shall Be Fitted To A Steel Tubular Structure Side By Side. There Shall Be Two Hooks For Accommodating Gauge Cum Level On The Back Of Seating Bench. The Equipment Shall Be As Light As Possible But The Strength And Structural Stability Shall Be Enough To Cater To The Purpose Of Inspection. The Seating Arrangement Shall Be Detachable. There Shall Be An Arrangement Of Light Weight Umbrella Or Collapsible/Detachable Hood Over The Equipment As A Shade Against Sun/Rain. Flag Fixing Arrangement Shall Be Provided At The Top/Side Of The Umbrella/Hood For Fixing Flags. The Equipment Shall Have Arrangement To Fix Pushing Handles On Both Side (Rear And Front). The Equipment Shall Be Electrically Insulated By Providing Insulation At Axle/Bearing/At Any Suitable Place. The Design Of The Equipment Shall Be Such That It Can Easily Negotiate All Types Of Point And Crossings, Diamond Crossings With And Without Slips, Curves, Level Crossings And Bridges Etc. The Equipment Shall Have An Efficient Braking Arrangement. The Equipment Shall Have Detachable Stone Guard Arrangement. The Equipment Shall Be Properly Insulated So That It Shall Work Without Signal Failure Over Indian Railways. Special Attention To Be Taken So That Failure Of Axle Counter Shall Not Occur In Automatic Section, Track-Circuit Area Etc. The Material Should Strictly Comply To The Mentioned Specification, And In Case Of Any Deviation, It Will Lead To Rejection At Suppliers Own Risk And Cost.

Refer document

Refer document

Refer document

	0	1	2	3	4	5	6	7	8	9
0	S.No.	PL Code\r(Group)	Item Type\rGST(Y/N)	Stock /\rNonStock	Ordering	Consider\rFor Eval	Approving\rAgency	Inspection\rAgency	Currency\rAllowed	Estimated\rRate
1	6025N001	Goods (Y)	Non Stock	---	Yes		CONSIGNEE	INR