Tender For Development Of Cremation Ground -Shamshan Ghat Par Vikas Karya Purani Abadi Mandalgarh Nagar Palika Mandalgarh
Tender Value
10 Lakhs
Estimated cost
Bid Submission
08 Jul 2020
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
MANDALGARH → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
tender for development of cremation ground -Shamshan Ghat Par Vikas Karya Purani Abadi Mandalgarh Nagar Palika Mandalgarh
BOQ
| Name of Work: SHAMSHAN GHAT PAR VIKASH KARYA PURANI ABADI MANDALGARH NAGAR PALIKA MANDALGARH | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Civil item : | |||
| 2 | 1.01 | construcation of \" HUT/gajebo/\" as par following specification and enclosed photograph - circular platfrom at ground leval having overall dia. not less than 7.66 mtr with width in annular shape foothpath - plinth leval area 17 sqm (did. Of circlur platfrom not less than 4.66 mtr.) plinth hight 0.60mtr. from ground leval should be in three equal steps having rise 15cm with one side railing . - lst roof leval hight should be not less than 3 mtr from plinth leval - total covered area of lat roof leval not less than Roof sold be made in frustum of cone shape having frustum height 0.60mtr - 2nd roof should be made not less than mtr dia at bottom with 0.60mtr cone height at centre difference of level between both roofs should be not less than 1 mtr minimum 6 nos. R.C.C. (M-20)circular column having dia. 0.23 mtr with required reinforcement from plinth level of support last roof leval having load bearing capacity of both roof with required Foundation the \"Hut\" should be facilitated with No. round sitting bench of 0.45Mtr. width and 0.10Mtr. thick should be made in R.C.C. of M-20-R.C.C. work should be complete in M-20 which required reinforcement (not less than minimum) as par relevant is code all work should be ornamemetal and having natural look of wooden finishing with ornamental plaster in rich mortar, using white cement oxide color (tow or more coats) as par potograph enclosed. With giving asthetic look. The job work should be complete as per direction of enginner incharge and upto satisfaction of engineer incharge. | item1 | 1 | Nos |
| 3 | 1.02 | Construction of gate as per following specification and as per Design and Drawing approved by Engineer in charge 4 Nos pillar as per design & Drawing should be made by 1:1.5:3 RCC with nominal reinforcement of 10,8,6mm Dia, all pillar's should be constructed not less than 1'-0\" dia. All pillars height should be not less then 10'-0\"mm from ground level. 1 No 13'-0\" long slab cast after 10,-0\" Clear height of pillar min 4'-0\" wide & 4\" thickness completed by 1:1:3 RCC having suitable reinforcement design and drawing approved by engineer incharge. No 10'-0\" long slab cast on 1 slab & 4 nos. pillars not less than 3'-0\" height of 4\" thickness by using 1:1.5:3 RCC nominal rainforcement required. Finishing work should be complete in wooden design/ Bamboo design/ ballies design etc. as per enclosed photograph. Complete with oxide colour & touch wood for fine finishing all work should be complete as per direction of engineer incharge. | item2 | 1 | Nos |
AI Tender Summary
Tender Timeline
Jun 23, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 10, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender