Day To Day Maintenance Works Of Ins Vishwakarma Cqae Pallava Park Ctw And Bvy Under Age Br Ii Of Ge Nd Visakhapatnam
Tender Value
47 Lakhs
Estimated cost
Bid Submission
20 Jul 2020
0 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
VISAKHAPATNAM → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Day To Day Maintenance Works Of Ins Vishwakarma Cqae Pallava Park Ctw And Bvy Under Age Br Ii Of Ge Nd Visakhapatnam
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 13-Jul-2020 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-Jul-2020 |
BOQ
| Name of Work: DAY TO DAY MAINTENANCE WORKS OF INS VISHWAKARMA, CQAE, PALLAVA PARK, CTW AND BVY UNDER AGE B/R - II OF GE [ND] VISAKHAPATNAM | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account:-\n[i] The repairs shall be done by skilled workmen in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progress of work shall not be hampered due to non availability of labour at any time.\n[ii] The contractor on getting information through Site order / Works diary regarding the nature of repair to be carried out, he shall immediately respond to the same and make all out efforts to carry out the same on priority within 48 hours. In case of any delay in responding / attending the repairs within 48 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 100/- per day per each work ordered upto 05(Five) days and Rs. 200/- per day thereafter till completion of the work in case of delay without valid reasons as decided by GE.\n[iii] Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of contractor to make suitable arrangements for attending the repairs simultaneously at all the places.\n[iv] The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be in addition to the provisions made in clause 50 of IAFW-2249 i.e (Compensation for delay in completion of work). | |||
| 2 | 2 | S & F vitrified ceramic tiles 10mm thick (square/rectangular) dark shade polished, area of each tiles not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing tiles complete all as specified and directed. | 200 | SqM | |
| 3 | 3 | S & F vitrified ceramic tiles 10mm thick (square/rectangular) dark shade polished, area of each tiles not exceeding 0.36 sqm on vertical surfaces such as skirtings, dados, and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick backing coat in CM 1:3 including dismantling existing tiles complete all as specified and directed. | 25 | SqM | |
| 4 | 4 | M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM 1:4 including dismantling existing tiles complete all as specified and directed. | 175 | SqM | |
| 5 | 5 | S & F coloured Glazed ceramic tiles of size 350X250X7mm/450X350X7mm thick as in vertical surfaces such as skirtings, dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match with shades of tiles laid over and including 10mm thick backing coat in CM 1:3 including dismantling existing tiles complete all as specified and directed. | 200 | SqM | |
| 6 | 6 | M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including grinding and polishing including dismantling existing stone slab / tiles complete all as specified and directed. | 30 | SqM | |
| 7 | 7 | M & L for 20 mm thick granite (of any type)work (table rubbed and polished) for wall lining(vaneering to wall) 12mm thick in cement mortar 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including grinding and polishing including dismantling existing stone slab / tiles complete all as specified and directed. | 20 | SqM | |
| 8 | 8 | M & L for marble (Makrana) work 18 to 20mm thick table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including dismantling existing stone slabs / tiles complete all as specified and directed. | 10 | SqM | |
| 9 | 9 | M & L for machine cut cudappa stone slab 20-25mm thick as in cooking platform laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in CM 1:6 including dismantling existing stone slab/tiles complete all as specified and directed. | 15 | SqM | |
| 10 | 10 | M & L for 20-25mm thick machine cut kota stone slab as in flooring jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20mm thick screed bed in CM 1:6 including dismantling existing stone slab/tiles complete all as specified and directed. | 30 | SqM | |
| 11 | 11 | M & L for 20-25mm thick machine cut kota stone slab as in vertical surfaces such as skirting, dados, pillar and risers of steps, etc laid, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10mm thick backing coat in CM 1:3 including dismantling existing stone slab/tiles complete all as specified and directed. | 15 | SqM | |
| 12 | 12 | Taking down chowkats or frames with shutters (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed. | 50 | EACH | |
| 13 | 13 | Taking down chowkats or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and directed. | 40 | EACH | |
| 14 | 14 | Taking down shutters of any discription area exc 1 Sqm and not exc 2 sqm each complete all as specified and directed. | 30 | LEAF | |
| 15 | 15 | Taking down shutters of any discription area not exc 1 Sqm each complete all as specified and directed. | 30 | LEAF | |
| 16 | 16 | Taking down shutters of any discription area exc 1 Sqm and not exc 2 sqm each and refixing in same opening complete all as specified and directed. | 5 | LEAF | |
| 17 | 17 | M & L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. | 1.5 | CuM | |
| 18 | 18 | M & L for 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared\nto receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge, etc. complete all as directed. | 27 | SqM | |
| 19 | 19 | M & L for 35 mm thick 2nd class hard wood factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm vaneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part 1), kiln seasoned and chemically pressure treated complete all as directed. | 27 | SqM | |
| 20 | 20 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as specified and as directed. | 35 | SqM | |
| 21 | 21 | S & F factory made UPVC white coloured sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ 0.2mm). Window profile with hallow section with multi chamber, frame (88mmx52mm), Sliding sash (42mmx67mm), sliding mesh sash (42mmx57mm), sliding interlock (one vertical length in each shutters) (45.5mmx28mm), glazing bead (24.5mmx16mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water, etc, making arrangement for fixing of hardware, EPDM gasket 1.2mm+0.2mm thick galvanised steel frame (30mmx18mm) 2 Nos, sliding sash (30mmx18mm) sliding mesh sash (26mmx10mm), Profile to be inserted in required profile, frame will be fixed to the wall with 8mmx100mm long fasteners. Hardware: [Touch lock of zinc alloyed (white powder coated),Steel roller system, stainless steel wire cloth 0.6mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. [Note: The unit rate quoted by the contractor is inclusive of all connected accessories excluding cost of glazing. Net opening will be measured for payment purpose.] | 21 | SqM | |
| 22 | 22 | S & F PVC ventilators frame work made with multi chamber rigid PVC hollow section comprising of DWUF-405 of size 40x46mm, pin headed glass 3mm thick fixed to the frame in the lower section using extruded PVC section with EPDM gasket (SPL-003) for both the PVC sections. Centre mullion shall be made up of multi chamber hollow PVC section DWUF 406 (63.5x40mm) with EPDM gasket fixed to three sides of DWUF-405 and DWUF-406 above the centre mullion. Glass panels with aluminium lower set is fixed to the frame DWUF 405 on the top of the ventilator for the glass, DWUF 405 and DWUF 406 corners shall be metre cut, welded and jointed with 12mm MS rods (guard bars) and necessary fixtures including fixing arrangements and aluminium mosquito proof wire mesh of aperture 1.4mm and 0.36mm dia of wire complete all as specified and directed. | 5.5 | SqM | |
| 23 | 23 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheets, reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. | 69 | RM | |
| 24 | 24 | S & F 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 Sqm in each pane fixed in any position complete all as specified and directed. | 18 | SqM | |
| 25 | 25 | M & L for Anodised aluminium powder coated door shutters with frame, (minimum thickness of powder coating 50micron) made of aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws including taking down old aluminium shutters complete all as directed. | 12 | SqM | |
| 26 | 26 | M & L for Anodised aluminium powder coated (Thickness of powder coating 50 micron) window and ventilator shutter with frame made of aluminium sections weighing not less 0.55 kg/m, side hung type without sash bars including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) including taking down old aluminium shutters complete all as specified and directed. | 12 | SqM | |
| 27 | 27 | M & L for Aluminium powder coated (Thickness of powder coating 50 micron) Deco grills of Model DG-104 (10mm thick) flat matt design riveted with rivets and fixed with suitable aluminium channel including necessary fixing arrangements and dismantling old grill complete all as directed. | 33 | SqM | |
| 28 | 28 | S & F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. | 20 | SqM | |
| 29 | 29 | M & L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sqm but n exc 0.5 sqm each treated with tar or coal tar black paint complete all as specified. | 0.2 | Per 100 NOS | |
| 30 | 30 | M & L for preparation of new or previously untreated surfaces wood and wood based surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint over pink primer complete all as specifed and directed. | 245 | SqM | |
| 31 | 31 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete as directed. | 20 | SqM | |
| 32 | 32 | S & F 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. | 30 | SqM | |
| 33 | 33 | S & F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 of size 100mm complete all as specified and directed. | 180 | EACH | |
| 34 | 34 | S & F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 of size 75mm complete all as specified and directed. | 45 | EACH | |
| 35 | 35 | S & F extruded aluminium alloy handles fabricated type anodised of size 150mm complete all as directed. | 120 | EACH | |
| 36 | 36 | S & F extruded aluminium alloy handles fabricated type anodised of size 100mm complete all as directed. | 30 | EACH | |
| 37 | 37 | S & F aluminium anodised barrel tower bolt of size 150mm long of extruded section complete all as specified | 120 | EACH | |
| 38 | 38 | S & F aluminium anodised barrel tower bolt of size 100mm long of extruded section complete all as specified | 30 | EACH | |
| 39 | 39 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as directed. | 45 | EACH | |
| 40 | 40 | S & F 18/19mm thickness pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including dismantling old boarding complete all as specified and directed. | 27 | SqM | |
| 41 | 41 | S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised for width of flap (when open) 30mm complete all as directed. | 60 | RM | |
| 42 | 42 | S & F in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc., complete all as specified and directed | 50 | RM | |
| 43 | 43 | S & F in repair mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified | 20 | EACH | |
| 44 | 44 | S & F Hasp and staple, 100mm size safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed. | 20 | EACH | |
| 45 | 45 | S & F magic eye of good quality of approved make as specified by Engr-in-Charge | 20 | EACH | |
| 46 | 46 | S & F aluminium body door closer hydraulically regulated, of designation No. 3, universal type, suitable for door shutters of width of 851 to 1000mm and weight between 61 to 80 kg and fixed complete all as specified and directed. | 15 | EACH | |
| 47 | 47 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litres capacity, triple layered, hoisted and fixed in position including 20mm dia ball valve PTMT including dismantling old tank complete all as specified and directed. | 5 | EACH | |
| 48 | 48 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litres capacity, triple layered, hoisted and fixed in position including 20mm dia ball valve PTMT including dismantling old tank complete all as specified and directed. | 8 | EACH | |
| 49 | 49 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 2000 litres capacity, triple layered, hoisted and fixed in position including 20mm dia ball valve PTMT including dismantling old tank complete all as specified and directed. | 5 | EACH | |
| 50 | 50 | S & F in repairs 20mm dia Ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe complete all as specified and directed. | 25 | EACH | |
| 51 | 51 | S & F in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. | 10 | EACH | |
| 52 | 52 | S & F in repairs 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. | 10 | EACH | |
| 53 | 53 | Supplying and fixing of 15 mm bore UPVC pipes of pressure rating 10 kgf/sqcm fixed complete to walls, ceiling or in floors etc., any type of pipe including taking down old GI tubing 15 mm bore complete all as specified and directed. | 100 | RM | |
| 54 | 54 | Supplying and fixing of 20 mm bore UPVC pipes of pressure rating 10 kgf/sqcm fixed complete to walls, ceiling or in floors etc., any type of pipe including taking down old GI tubing 20 mm bore complete all as specified and directed. | 150 | RM | |
| 55 | 55 | Supplying and fixing of 25 mm bore UPVC pipes of pressure rating 10 kgf/sqcm fixed complete to walls, ceiling or in floors etc., any type of pipe including taking down old GI tubing 25 or 32 mm bore complete all as specified and directed. | 50 | RM | |
| 56 | 56 | S & F in repairs brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified. | 15 | EACH | |
| 57 | 57 | S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 lit capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified. | 15 | EACH | |
| 58 | 58 | S & F in repairs Vitreous china wash basin, white flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand including CP waste coupling, 32mm dia PVC waste pipe complete all as specified and directed. | 15 | EACH | |
| 59 | 59 | S & F in repairs 15mm dia Pillar tap, cast copper alloy with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. | 10 | EACH | |
| 60 | 60 | S & F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as directed. | 10 | EACH | |
| 61 | 61 | S & F in repairs 15 mm bore Chromium plated bib taps fancy type, cast copper alloy, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. | 20 | EACH | |
| 62 | 62 | S & F in repairs 15mm dia Stop valves,fancy type, cast copper alloy, screwed down, high pressure, , chromium plated with long shank and cup (concealed type), screwed both ends for iron pipe or for unions and fixed complete all as directed. | 5 | EACH | |
| 63 | 63 | M & L for PVC (SWR) floor trap of 75mm of outlet, plain with grating including jointing with solvent cement complete all as specified and directed. | 5 | EACH | |
| 64 | 64 | S & F in repairs Vitreous china Squatting Pan, white, 'Orissa' pattern, of size 580 x 440mm, with integral foot rests including CI 'P' or 'S' trap and provision of cement concrete bedding and making good the disturbed portion to match with the existing finishes of floor all as specified and directed. | 5 | EACH | |
| 65 | 65 | S & F in repairs Wash down water closet (Pedestal pattern), Vitreous China white, plastic water closet seat of same colour closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. | 10 | EACH | |
| 66 | 66 | S & F in repairs EWC thermo plastic seat cover of approved make complete all as specified. | 20 | EACH | |
| 67 | 67 | S & F in repairs Hand Shower (Health faucet) including 1.0m Long flexible Stainless steel connecting pipe with all necessary accessories complete all as directed. | 30 | EACH | |
| 68 | 68 | S & F 75mm bore PVC (SWR) soil, waste and rain water pipes, Single socketed in any length with rubber ring joints fixed to floor or trenches including taking down old pipes complete all as specified and directed. | 50 | RM | |
| 69 | 69 | S & F 110mm bore PVC (SWR) soil, waste and rain water pipes, Single socketed in any length with rubber ring joints fixed to floor or trenches including taking down old pipes complete all as specified and directed. | 75 | RM | |
| 70 | 70 | S & F 75mm bore PVC (SWR) soil, waste and rain water pipes, Single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed. | 75 | RM | |
| 71 | 71 | S & F 110mm bore PVC (SWR) soil, waste and rain water pipes, Single socketed in any length with rubber ring joints fixed to walls including taking down old pipes complete all as specified and directed. | 100 | RM | |
| 72 | 72 | M & L for 75mm bore PVC (SWR) bends any radius with oval access door complete all as specified. | 15 | EACH | |
| 73 | 73 | M & L for 110mm bore PVC (SWR) bends any radius with oval access door complete all as specified. | 10 | EACH | |
| 74 | 74 | M & L for 110mm bore PVC (SWR) vent cowl complete all as specified. | 10 | EACH | |
| 75 | 75 | S & F for 75mm bore PVC (SWR) branch piece, single (Single T) equal or unequal with access door complete all as specified. | 15 | EACH | |
| 76 | 76 | S & F for 110mm bore PVC (SWR) branch piece, single (Single T) equal or unequal with access door complete all as specified. | 10 | EACH | |
| 77 | 77 | S & F for 110mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal with access door complete all as specified. | 10 | EACH | |
| 78 | 78 | S & F for 75mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal with access door complete all as specified. | 10 | EACH | |
| 79 | 79 | S & F Stack clamps out of MS flat iron 50x5mm and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified and directed. | 25 | EACH | |
| 80 | 80 | M & L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of weather proof exterior emulsion paint 100% acrylic complete all as spcified. | 8000 | SqM | |
| 81 | 81 | M & L for preparation of old painted surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying one coat of distemper oil emulsion complete all as spcified. | 9900 | SqM | |
| 82 | 82 | M & L for preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of colour wash complete all as specified and directed. | 500 | SqM | |
| 83 | 83 | M & L for preparation of old surfaces of ceiling by brooming down or by steel wire brushing and applying one coat of white wash complete all as spcified. | 2300 | SqM | |
| 84 | 84 | M & L for providing one coats of cement base on wall or cornice including preparation of old decorated plastered or unplastered surfaces by brooming down or steel wire brushing all as specified and directed by Engineer-in-charge. | 3000 | SqM | |
| 85 | 85 | M & L for complete removal of existing treatment and preparation of surfaces and applying 3mm thick wall care putty for making good undulations to obtain smooth surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. | 3500 | SqM | |
| 86 | 86 | M & L for applying 3mm thick wall care putty to obtain smooth and even surfaces complete all as specified and directed. | 4900 | SqM | |
| 87 | 87 | M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed. | 2500 | SqM | |
| 88 | 88 | M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specifed and directed. | 3000 | SqM | |
| 89 | 89 | M & L for preparation of old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash complete all as spcified. | 2000 | SqM | |
| 90 | 90 | M & L for cleaning and removing all scale and dirt, etc., from tanks of capacity exceeding 500 Litres but not exceeding 1000 litres and from mouths of circulating pipes, etc complete all as directed. [Note: Quoted rate shall deemed to be included for writing details of \"Tank cleaned on ______ (date)\" as directed by Engineer-in-Charge]. | 145 | EACH | |
| 91 | 91 | M & L for writing letters or figures (Block, Roman, Italic and Indian) not exc 30cm high on wall surfaces boldly and solidly without showing signs of brush marks complete all as specified and directed by the Engineer-in-Charge. | 300 | Per 10 Nos (Per CM of height) |
AI Tender Summary
Tender Timeline
Jul 13, 2020
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 20, 2020
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 20, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 25, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender