Welcome And Composite Maintenance Of Omq Ors And Jcos Accn And Repair Maintenance Of Internal Electrification At Map Qtrs At Bamrauli
Tender Value
36 Lakhs
Estimated cost
Bid Submission
15 Jul 2020
0 days left
EMD
72000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bamrauli → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Welcome And Composite Maintenance Of Omq Ors And Jcos Accn And Repair Maintenance Of Internal Electrification At Map Qtrs At Bamrauli
BOQ
| Name of Work: WELCOME & COMPOSITE MAINTENANCE OF OMQ, ORS AND JCOS ACCN AND REPAIR/MAINT OF INTERNAL ELECTRIFICATION AT MAP QTRS AT BAMRAULI | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Resecuring or easing of wooden door shutters for easying & adjustmenting wihtout taking downof shutter of any description not exceeding 1 sqm each complete all as specified and directed | 40 | Per Leaf | |
| 2 | 2 | Taking down door shutters and changing of unserviceable existing butt hinges and re-fixing in same opening etc exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed. | 20 | Per Leaf | |
| 3 | 3 | S & F in repair 300 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. complete all as specified and directed. | 35 | Each | |
| 4 | 4 | S & F in repair 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. | 50 | Each | |
| 5 | 5 | S & F.in repair 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. | 50 | Each | |
| 6 | 6 | S&F in repair hasp and staple 100mm size, safety type aluminum anodized including bolt to hinge plate and fixed to cupboard shutter or kitchen cabinet shutters including taking out the existing complete all as specified and directed. | 30 | Each | |
| 7 | 7 | S & F in repair 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. | 60 | Each | |
| 8 | 8 | S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed including taking down the unserviceable existing complete all as specified and directed. | 50 | Sqm | |
| 9 | 9 | Hacking out old broken glass ( any thickness) any size and quality etc from metal frames fixed with pin, beading or oil puttyn exceeding 2.5 sqm complete all as specified and directed. | 60 | Sqm | |
| 10 | 10 | S&F 4.8mm thick sheet glass ordinary quality any size and in any type of frame and glazing with rubber beading in square not exceeding 0.5 Sqm in each panes complete all as specified and directed. | 20 | Sqm | |
| 11 | 11 | All as per item No. 10 above but 4.8mm thick glass in square exceeding 0.5 Sqm in each pane | 40 | Sqm | |
| 12 | 12 | S&F in repair corner glossy glass self of with heavy bracket fixed with SS screws in wall complete all as specified and directed | 7 | Each | |
| 13 | 13 | S & F in repair for PVC coated Mild steel curtain rod of 20mm dia bore etc fixed complete all as specified and directed. | 230 | RM | |
| 14 | 14 | S & F in repair curtain rod holder/ brackets and stops etc suitable for 20 mm dia bore MS rod complete all as specified and directed. | 180 | Each pair | |
| 15 | 15 | Material and labour in replacement of rubber bead/seal 40mm wide and 3-4mm thick to cover doors/window gap fixed with nails and make good to doors as complete all as specified and directed. | 220 | RM | |
| 16 | 16 | Material and labour in replacement of fancy type door seal / bead of size 30mm wide and 2mm thick 20 mm wide aluminum strips with holding arrangement of 10mm wide strip of fibre brushes for door cill etc.complete all as specified and directed. | 15 | Each | |
| 17 | 17 | Taking down existing aluminium windows of any size and re-fixing the same after minor repairs such as replacement of rubber beading and aluminium strips etc complete all as specified and directed. | 30 | Each | |
| 18 | 18 | S&F in repair 140 mm long door stopper of aluminium alooy body and tounge,anodised with hard drawn steel spring fixed to door complete all as specified and directed | 35 | Each | |
| 19 | 19 | Tuck welding in repair not exceeding 2.5 cm in length of metal not exceeding 6mm thick complete all as specified and directed. | 50 | Each | |
| 20 | 20 | Running welding in repairs not exceeding 6mm thick of matel to be welded in existing items etc complete all as specified and directed. | 10 | RM | |
| 21 | 21 | Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed | 35 | Per leaf | |
| 22 | 22 | S&F 35 mm Flush shutters, solid core construction, with block board core and playwood face panels, commercial type on both side etc complete all as specified and directed | 18 | Sqm | |
| 23 | 23 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,fixed in the frame at site as per specification & drawing.complete all as specified and directed | 35 | Sqm | |
| 24 | 24 | S&F 100mm size Butt hinges, medium weight, cold rolled mild steel, and fixed including welding if reqd complete all as specified and directed | 105 | Each | |
| 25 | 25 | S & F 250 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. complete all as specified and directed. | 35 | Each | |
| 26 | 26 | S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. | 105 | Each | |
| 27 | 27 | M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 36 | Sqm | |
| 28 | 28 | S&F in repair 18-19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. | 30 | Sqm | |
| 29 | 29 | S&F in repair 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work etc complete all as specified and directed. | 20 | Sqm | |
| 30 | 30 | S&F in repair PVC cabinet frame of size 18mm x 75mm made out of 18mm thick PVC board wood grain colour and frame shall be fixed with 50mm long steel screw inside using drilling machine and plastic fasteners complete all as specified and directed.\nMake : Rajshree or equivalent as approved by GE | 40 | RM | |
| 31 | 31 | S&F in repair PVC kitchen cabinet box and shutter made out of 18mm thick one side PVC prelaminated wood grain board shutter will be fixed on the PVC frame with auto hinges and steel screw including fancy type stainless steel handles,complete all as specified and directed. Size of cabinet not more than 90 cm wide complete all as specified and directed. | 60 | SQM | |
| 32 | 32 | S&F telescopic channel of Mild steel in kitchen and warddrobe drawers of size of 30cm to 45cm in length fixed with screws etc complete all as specified and directed \nMake godrej or equivalents | 18 | Each pair | |
| 33 | 33 | S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed . | 72 | EACH | |
| 34 | 34 | Material and labour for continuous piano hinges, mild steel bright finish width of flap 40mm fixed including taking out the existing complete all as specified and directed. | 80 | RM | |
| 35 | 35 | S&F in repair 2 lever wardrobe lock,verticle type of 50mm in size.complete all as specified and directed. | 10 | Each | |
| 36 | 36 | S&F in repair hasp and staple 100mm size, safety type aluminum anodized including bolt to hinge plate and fixed to cupboard shutter or kitchen cabinet shutters complete all as specified and directed. | 40 | Each | |
| 37 | 37 | S & F in repair wardrobe hooks (single) 50mm to 60mm, aluminium, complete all as specified and as directed. | 8 | EACH | |
| 38 | 38 | S&F for powder coating aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed. | 56 | Kg | |
| 39 | 39 | M&L in repair Aluminium (powder coated) sliding glazed shutter of suitable size of 3 lane with necessary joining cleats, glazing clips, rubber gasket, aluminium snap beading and locking arrangement at both end all as specified and as shown and drawing complete all as specified and directed.\nNotes : (i) Frame and Glass filling in panels to windows shall be measured and paid for separately \n(ii) Thickness of powder (epoxy polyster) coating shall not be less than 50 Micron\n(iii) Shade/tint of powder coating (epoxy polyster) shall be as approved by GE. \n(iv) Aluminium section shall be as per drg. No. CE/ALD/TD-194 sheet No. 1/2 & 2/2 \n(v) Frame should be measure under respective items of this schedule | 25 | Sqm | |
| 40 | 40 | Supply and fixing 4.8 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with rubber beading in square not.exceeding 0.5 Sqm in each panes complete all as specified and directed. | 10 | Sqm | |
| 41 | 41 | All as per item No. 40 above but 4.8 mm thick glass in square exc 0.5 Sqm in each pane | 15 | sqm | |
| 42 | 42 | S&F in repair 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to existing frame with welding complete all as specified and directed. | 40 | Each | |
| 43 | 43 | S&F in repair 150mm size 7 lever super night latch single bolt, fixed in inside side of door shutter complete all as specified and directed\nMake Godrej | 5 | Each | |
| 44 | 44 | S&F in repair 32mm dia PVC flush pipe for low level cistern for pedstal pan including all joints long type fixed complete all as specified and directed. | 15 | Each | |
| 45 | 45 | S&F in repair 15mm bore dia Bib tap cast copper alloy with fancy handle ,screwed for iron pipe or for ferrue and fixed complete all as specified and directed. | 10 | Each | |
| 46 | 46 | S&F in repair 15mm dia Bib tap of brass chrominium plated fancy type long body fancy bib tapscrewed down high pressure with crutch or butter flyhandle complete all as specified and directed \nMake Paryag CAT Part No 9516 or equivalent | 18 | Each | |
| 47 | 47 | M & L for replacement of spindle,nippule ,washer etc of any size etc of CP long body bib taps & pillar tab of any make complete all as specified and directed. | 70 | Each | |
| 48 | 48 | S&F in repair two ways fancy type mixer pillar tap hot and cold, 15mm dia size with Screwed down high pressure,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed | 12 | Each | |
| 49 | 49 | S&F in repair 15 mm bore concealed stop cock ISI marked, cast copper alloy, screwed down, high pressure, fancy type handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. | 35 | Each | |
| 50 | 50 | S&F in repair Brass chromium plated shower rose 125mm size including Nipple, socket and other fittings etc complete all as specified and directed. | 30 | Each | |
| 51 | 51 | S & F in repair jet spray with flexible pipe and holding screw other fittings etc suitable for 15 mm bore pipe complete all as specified and directed. | 10 | each | |
| 52 | 52 | S &F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug,CP weast cuppling , washers waste pipe, cast iron cantilever brackets, connecting union overall size 914mmx460mm with bowl size 405mm x 354mm x 203mm etc complete all as specified and directed.\nNote Waste pipe measaure seprately\nMAKE : PARYAG CAT PART NO 939 & JAYNA CAT PART NO SBSD 05 & JAQUAR MODEL NO JQSBSD 52- &BLUE STAR | 10 | Each | |
| 53 | 53 | S&F flexible PVC waste pipe of 90cm lenfth of fit to sink drain hose etc complete all as specified and directed. | 10 | Each | |
| 54 | 54 | S &F in repair Stainless steel plate rack of size 600x750x250mm fixed etc complete all as specified and directed.\nMake : Paryag CAT PART NO P -330 & Blue Star CAT PART No KPR311 | 12 | Each | |
| 55 | 55 | All as per item No 54 Above but Size 780x900x250mm etc complete all as specified and directed.\nMake : Paryag CAT PART No P-348 & Blue Star KPR-315 | 5 | Each | |
| 56 | 56 | S&F in repair Rotational moulded polythene water storage tanks, hoisted and fixed in position 500ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia bore ,Nippule complete all as specified and directed. | 10 | Each | |
| 57 | 57 | S&F in repair Rotational moulded polythene water storage tanks , hoisted and fixed in position 1000 ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia bore, 2 Nos nipple complete all as specified and directed. | 3 | Each | |
| 58 | 58 | M&L for in repair for 25 mm dia PVC float valve with ball & rod complete all as specified and directed. | 20 | Each | |
| 59 | 59 | All as above item No 58 but size 40mm dia | 40 | Each | |
| 60 | 60 | S & F in repair PVC cover (Lid) for PVC tank of capacity 500 Ltr complete all as specified and directed | 15 | Each | |
| 61 | 61 | S & F in repair PVC cover (Lid) for PVC tank of capacity 1000 Ltr complete all as specified and directed | 5 | Each | |
| 62 | 62 | M & L for repairing of Leakage portion using M seal, such as 2 Nos of 20 to 25mm GI union and check nut etc for Rotational moulded polythene three layer water storage tanks 500ltrs capacity including disconnecting the tank complete all as specified and directed. | 15 | Each | |
| 63 | 63 | Labour onlyfor opening of air lock in toilets/ bath and kitchen of GI pipe of any dia complete all as specified and directed. | 100 | Each | |
| 64 | 64 | Taking up or down 15mm dia steel tubing and connections, including removal to store etccomplete all as specified and directed | 70 | RM | |
| 65 | 65 | All as per item No. 64 above but 20mm dia | 100 | RM | |
| 66 | 66 | M&L for 15mm dia GI tubing medium grade with all necessary fittings such as elbow bend reducer etc.to walls, ceiling or laid under floors complete all as specified and directed. | 70 | RM | |
| 67 | 67 | All as per item No. 66 above but 20mm dia | 100 | RM | |
| 68 | 68 | S&F in repair Grating doom 100 mm dia of PTMT complete all as specified and directed.\nMake : Paryag CAT No 111 & SHAKTI & POLYTUF | 30 | Each | |
| 69 | 69 | All as per item No 68 above but 125mm dia | 20 | Each | |
| 70 | 70 | S&F in repair towel rail 600mm long and 20mm dia of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. | 40 | Each | |
| 71 | 71 | S&F in repair towel ring 20 mm dia of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. | 8 | Each | |
| 72 | 72 | S&F in repair beveled edged looking mirror of size 600mmx900mm of selected quality glass mounted with SS studs complete all as specifiesd and directed | 10 | Each | |
| 73 | 73 | S&F in repair beveled edged looking mirror of size 600mmx450mm of selected quality glass mounted with aluminum frame and SS studs complete all as specifiesd and directed | 25 | Each | |
| 74 | 74 | S&F in repair EWC plastic seat cover of any colour to match with EWC for pedstal pan complete all as specifiesd and directed\nMake : Hindware, Cera | 20 | Each | |
| 75 | 75 | S&F in repair 15mm dia PVC connection pipe of length 600mm fixed complete all as specified and directed. | 40 | Each | |
| 76 | 76 | S&F in repair 75mm dia PVC (SWR) floor /nanhi trap with grating including jointing with solvent cement complete all as specified and directed. | 25 | Each | |
| 77 | 77 | S&F in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, ( exclusing flushing cistern & flush pipe) fixed including connection to trap and to flushing pipe,anti syphonage pipe etc making good the disturbed surfaces and to match with existing surface and taking out the existing pan complete all as specified and directed.\nMake Hindware Cat-20042white, & CERA CAt No 2878 &Perryware.with integral footrest | 2 | Each | |
| 78 | 78 | S&F in repair vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc . including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device complete all as specified and directed | 8 | Each | |
| 79 | 79 | S&F in repair vitreous china wash down water closet one piece (pedestal patterni) ivory with PVC sheet cover type & flushing cisternand mking connection to flush pipeetc complete including making functional and removal rubbish/waste materials to a distance n exc 50 m complete all as specified and directed | 2 | Each | |
| 80 | 80 | S&F in repair chromium plated fancy type Hand Jet spray (Health faucet) complete all as specified and directed \nMake:Jaquar Cat part ALD- 577 or CERA | 12 | Each | |
| 81 | 81 | S&F in repair vitreous china wash hand basin, white, flat back, size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including PVC connection pipe of 450mm length, waste coupling of 32mm dia of PTMT, MS brackets including cutting for and pining in ends of brackets complete all as specified and directed.\nMake : Cera CAT Part No1007/: Hindware CAT No 10036 & equivalent of PARRY WARE | 8 | Each | |
| 82 | 82 | S&F in repair mild steel angle iron bracket with 25x25x3 mm angle iron for WHB including refixing of WHB, steel painting and making good disturbed surface complete all as specified and directed. | 5 | Each Pair | |
| 83 | 83 | S&F in repair 10 ltrs capacity PVC low level valve less flushing cistern (white) syphonic action type with all fittings such as inlet ball valve, float, and handle 32 mm dia polythene high density flush pipe and connected to water closet any pattern complete all as specified and directed. | 25 | Each | |
| 84 | 84 | S&F in repair bottle trap from WHB by removing all blockages etc complete all as specified and directed. | 30 | Each | |
| 85 | 85 | S&F in repair PVC Syphon kit suitable for PVC Cistern complete all as specified and directed. | 35 | Each | |
| 86 | 86 | Resecurring of syphon kit by minor adjustment and replaceemnt of syphon washer etc complete all as specified and directed. | 60 | Each | |
| 87 | 87 | S&F in repair 32mm bore waste fittings of brass CP for glazed ware sinks,basin etc with long screwed shanks , and fly nut flange end bedded in red lead cement and other end fixed complete all as specified and directed. | 25 | Each | |
| 88 | 88 | S&F in repair three way wall mixer suitable for 15 mm dia bore pipe with provision of over head shower with L bends connecting legs & wall flanges complete all as specified and directed. | 30 | Each | |
| 89 | 89 | M L for replacement of L-bends & connecting legs etc to wall mixer of any make complete all as specified and directed. | 60 | Each pair | |
| 90 | 90 | S & F in repair CP soap dish dispensor complete all as specified and directed\nMake Cat part No-AKB 35 735 Jaquar or euovalent | 5 | Each | |
| 91 | 91 | M&L for 15mm thick plaster in cement mortar ( 1:6) as in patches finished even and smooth without using extra cement including taking down old plaster at any location and height complete all as specified and directed | 70 | Sqm | |
| 92 | 92 | All as per item No.91 above but 15mm thick in cement mortar ( 1:4) | 50 | Sqm | |
| 93 | 93 | All as per item No.91 above but 10mm thick in cement mortar ( 1:3) as on ceiling | 40 | Sqm | |
| 94 | 94 | M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiteing primer etc complete all as specified and directed | 70 | Sqm | |
| 95 | 95 | M&L for preparing newly plastered surfaces of undecorated ceilings and applying three coasts of white wash.complete all as specified and directed. | 40 | Sqm | |
| 96 | 96 | M&L for two coats of cement base over a coat of alakali resistant primer paint including preparation of new surfaces of walls complete all as specified and directed. | 50 | Sqm | |
| 97 | 97 | M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of distemper oil-emulsion over a coat of chalk whitenng primer complete all as specified and directed. | 300 | Sqm | |
| 98 | 98 | M&L for washing rubbing down and stopping of distempered and painted surface and applying one coats of distemper oil-emulsion complete all as specified and directed. | 800 | Sqm | |
| 99 | 99 | All as per item No.98 Above but two coats of distemper oil emuslsion. | 300 | Sqm | |
| 100 | 100 | M&L for preparing old plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. | 600 | Sqm | |
| 101 | 101 | M&L for preparation of old decorated surface of walls including removing of existing nails and filling of holes, crack with wallcare putty where required & making good to the surfaces complete all as specified and directed. | 300 | sqm | |
| 102 | 102 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 120 | SQM | |
| 103 | 103 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 50 | SQM | |
| 104 | 104 | Demolition of brick work built in cement mortor including all quoins, arches, pillars, etc complete all as specified and directed. | 3 | CUM | |
| 105 | 105 | M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1 6 etc complete all as specified and directed. | 3 | CUM | |
| 106 | 106 | Dismantling of stone slabs, and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing un-serviceable tiles from site and rubbish off the premises complete all as specified and directed. | 2.5 | Per 10sqm | |
| 107 | 107 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with Grey cement and pigment including laiying over 30mm sand cousion complete all as specified and directed | 15 | Sqm | |
| 108 | 108 | All as per item No 107 Above but except interlocking tiles complete all as specified and directed | 20 | Sqm | |
| 109 | 109 | M&L for 20mm thick Green marble (of any type) work table rubbed and polished in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed | 10 | Sqm | |
| 110 | 110 | Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises for minor repair to floor tiles/ nahani traps and repair to concealed stop cock and GI tubing in wall of any size etc in patches complete all as specified and directed. | 150 | Sqm | |
| 111 | 111 | M&L for Non Skid ceramic tiles (1st quality/Premium Quality) coloured white 300 mm X 300 mm X 7 to 8 mm thick(square/ rectagular) area of each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc complete all as specified and directed. | 60 | Sqm | |
| 112 | 112 | M&L for Non Skid ceramic tiles (1st quality/Premium Quality) coloured 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc complete all as specified and directed. | 50 | Sqm | |
| 113 | 113 | M&L for Glazed ceramic coloured tiles (1st quality/Premium Quality) in vertical surface 450x 350x7 mm thick joint less tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) etc complete all as specified and directed. | 40 | Sqm | |
| 114 | 114 | M&L for filling white cement on floor/wall tiles joints including removing old fillings etc complete all as specified and directed. | 100 | Sqm | |
| 115 | 115 | Demolition of concrete unreinforced of any description and in any position complete all as specified and directed. | 6 | cum | |
| 116 | 116 | Material and labour for PCC 1:2:4 using 20mm graded stone aggregate as in PCC benching at junction of tiles , parapets and filling hollow section of pressed steel section of suitable size complete all as specified and directed. | 1 | Cum | |
| 117 | 117 | M&L cement concrete PCC (1:4:8) Type-D2,using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. | 4 | Cum | |
| 118 | 118 | Material and labour for PCC flooring 40mm thick ( 1:2:4 ) type B-1 using 20mm graded stone aggregate finishing even and smooth without using extra cement ( in patches n.exc 3 Sqm) complete all as specified and directed. | 25 | Sqm | |
| 119 | 119 | M&L for water proofing treatment for existing sunken portion by complete demolition of existing leakage sunken portion area exc 1 Sqm but not. exceeding 2.0 Sqm and cleaning the surface and applying cement slurry and 10mm thick cement plaster in CM 1:3 mixing with liquid water proofing compound after surface is fully dried, cleaned free from dust and painting with a coat of bituminous primer@ 0.3 liter / Sqm after primer the entire surface, applying with hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2Kg / Sqm, over hot bitumen, providing polymeric water proofing membrance consisting of 90 to 100 micron thick central core of HMHDPE fill with standard weight not less than 3Kg/Sqm provide with 100mm side lap/end lap after that fixing P trap and filling sunken portion in PCC 1:5:10 type E-2 appox 30cm high and PCC 1:2:4 type B-1 using 20mm graded stone aggregate, supply & fixing new vitrious china Wated Closet pan of any pattern excluding flushing cistern & flush pipe complete all as specified and directed. \nNote : (i) Rate quoted by the contractor shall deemed to be included for testing of treatment as directed | 3 | each job | |
| 120 | 120 | M & L for cutting holes into or through brick walls built in cement mortar and making good in cement concrete (1:2:4) Type B-1 using 20mm graded stone aggregate exceeding half but not exceeding one brick thick complete all as specified and directed | 20 | each job | |
| 121 | 121 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exceeding 10cm girth but not exceeding 20cm. complete all as specified and directed. | 30 | RM | |
| 122 | 122 | S & F in repair 110 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete all as specified and directed. | 120 | RM | |
| 123 | 123 | S & F in repair 75 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete all as specified and directed. | 80 | RM | |
| 124 | 124 | S & F in repair 110mm PVC (SWR) bends of any radius complete all as specified and directed | 30 | Each | |
| 125 | 125 | S & F in repair 75mm PVC (SWR) bends of any radius complete all as specified and directed | 20 | Each | |
| 126 | 126 | S & F in repair 110mm PVC (SWR) junction single T equal or unequal with acccessible door complete all as specified and directed | 15 | Each | |
| 127 | 127 | S & F in repair 110mm PVC (SWR) vent cowl complete all as specified and directed | 10 | Each | |
| 128 | 128 | S&F in repair plastic sheets including fixing with screws on wall complete all as specified and directed\nMake Reoxlite | 25 | Sqm | |
| 129 | 129 | S&F in repair screws on wall complete all as specified and directed.\nMake Reoxlite | 100 | sqm | |
| 130 | 130 | M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole bydrilling 6mm dia holes at a downwardangle of 45 degree at 150mm centre tocentre and sealing the same complete all as specified and directed | 400 | RM | |
| 131 | 131 | Supply and filling of Adhesive Silicon sealent in all types of windows/ Ventilator cill or in any gap/joint etc complete all as specified and directed | 150 | RM | |
| 132 | 132 | S&F in repair 3mm thick Aluminium composite panel cladding using aluminium composite panel sheet 3mm thick (Vita 25mm aluminium foil with PVDF coating) at ht of 4-5 mtr (ACP will be fixed over MS Tube welded over MS steel framed works) and filling the gap with silicon, sealant and other materials of approved quality etc complete in all respect as specified and directed. | 25 | Sqm | |
| 133 | 133 | S&F in repair 3mm thick (ACP) Aluminium composite panel letter size 200mmx25x25mm with inside LED lights (Vita 25mm aluminium foil with PVDF coating) in English. \"ASSISTANT GARRISON ENGINEER B/R-II (AF) BAMRAULI \" and filling the gap with silicon, sealant and other materials of approved quality etc complete in all respect as specified and directed. | 42 | Nos | |
| 134 | 134 | S&F in repair 3mm thick (ACP) Aluminium composite panel letter size 200mmx25x50mm with inside LED lights (Vita 25mm aluminium foil with PVDF coating) in Hindi. \"????? ????? ????????? ?? ?? - (?? ??) ?????? in Hindi) and filling the gap with silicon, sealant and other materials of approved quality etc complete in all respect as specified and directed. | 38 | Nos | |
| 135 | 135 | Labour only for attending complaint and rectifying any type of fault in internal electrification such as decarbonising connection in the DBs checking for disconnections any burning due to over loading in DBs and restoring electric supply,checking and repair of switch sockets, MCBs any type, repair/replacement of tube light fitting, any type, by replacement of worn out ballast, bipin holder, starter, worn out wire, repair of faulty fan by disconnecting and replacement of worn out part such as capacitor, fan regulator, worn outwire, repair of lamp by replacement of worn out holder wire, earthing, repair replacement of electric bell/buzer/bell push and other internal accessories i.e. switch socket etc. which needs to serviceable the electric supply complete in all respect as specified and directed.\nNote :- (1) Materials to be issued as supply only under respective items..\n(2). Contractor shall be provided necessary T&P such as ladder, Earth, tester, Insulation tester, drill machine during rectification fault and nothing extra shall be paid to him on this account\n(3). The cost of insulation tape shall be deemed to be included in the unit rate quoted against relevant item (4) Complaints will be attended round the clock basis. (as and when recieved Day & Night) | 2500 | Each Job | |
| 136 | 136 | Supply only Switch piano 6 amps, single pole, one way, 230 volts complete all as specified and directed | 200 | Each | |
| 137 | 137 | Supply only Switch piano 16 amps, single pole, one way 230 volts complete all as specified and directed | 200 | Each | |
| 138 | 138 | Supply only Socket outlet 6 Amp 2pin & 3 pin, flush type complete all as specified and directed | 200 | Each | |
| 139 | 139 | Supply only Socket out let, 16 amp and 6 amp, flush type complete all as specified and directed | 200 | Each | |
| 140 | 140 | Supply only Electronic fan regulator 5 step 230 volts, switch type module or equivalent other make complete all as specified and directed | 200 | Each | |
| 141 | 141 | Supply only Electronic fan regulator 5 step 230 volts, socket size one module complete all as specified and directed | 100 | Each | |
| 142 | 142 | Supply only Switch socket combination 6/16 Amp 220 Volt ISI marked complete all as specified and directed | 100 | Each | |
| 143 | 143 | Supply only Ballast electronic for T-5 lamp, 28 watt, 230 volt. Make : Havells Cat Part No. LHBF 11128032 or equivalent in Philips & Bajaj | 100 | Each | |
| 144 | 144 | Supply only Lamp holder, insulated body, with back plate 230 Volt suitable for batten fittings complete all as specified and directed | 100 | Each | |
| 145 | 145 | Supply only Capacitor 230 volt, 2.5 Mfd for ceiling fans complete all as specified and directed | 100 | Each | |
| 146 | 146 | Supply only Capacitor 230 volt, 3.15 Mfd for ceiling fans complete all as specified and directed | 100 | Each | |
| 147 | 147 | Supply only Switch piano modular type, 230 volts, single pole, one way, 10 Amp, one module any type any make as per existing complete all as specified and directed | 100 | Each | |
| 148 | 148 | Supply only Switch modular type, 230 volts, single pole, one way, 20 Amp one module.any type any make as per existing complete all as specified and directed | 100 | Each | |
| 149 | 149 | Supply only Socket out let 5 pin, 10 Amp, 230 volts modular type.any type any make as per existing complete all as specified and directed | 100 | Each | |
| 150 | 150 | Supply only Socket out let 5 pin, 10 amp & 20 amp, 230 volts modular type.any type any make as per existing complete all as specified and directed | 100 | Each | |
| 151 | 151 | Supply only 4.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade complete all as specified and directed | 100 | RM | |
| 152 | 152 | Supply only 6.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade complete all as specified and directed | 100 | RM | |
| 153 | 153 | Supply only 10.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed. | 100 | RM | |
| 154 | 154 | Supply only T5 rod 220 volt 28 watt 4 feet long double side connection complete all as specified and directed | 100 | Each | |
| 155 | 155 | Supply only LED Tube rod fittings 4 feet long surface / wall mounted LED batten extruded aluminium housing provided for efficiant heat dissipation with polycarbonate diffuser and intigrated electronic driver 20 watt including tube rod complete all as specified and directed.\nMake Havells cat part Endura liniar BS20WLED830SPCWH or equivelent Philips and crompton greaves.\nNote:- This item will be fixed by electrician under above job of item No-135 | 200 | Each | |
| 156 | 156 | Supply only LED tube rod 4 feet long of 20 watt ultra bright polycarbonate tube light with very high efficiancy single side connection suitated for installation in existing T5/T8 with G13 Lamp holder complete all as specified and directed\nMake Havells cat part No- Photon Ultra Plus 1213T8SSTL20WLED865SPC or equivelent Bajaj and Crompton | 200 | Each | |
| 157 | 157 | Supply Only calling bell ding dong type 220 volt 50 Htz complete all as specified and directed | 100 | Each | |
| 158 | 158 | Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings complete all as specified and directed\nNote :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard.\n(ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box.\n (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. (iv) Exhaust fan and ceiling fan shall be taken down in under separate item of this schedule. | 110 | Per \npoint | |
| 159 | 159 | M & L for point wiring with PVC insulated, PVC unsheathed cable single core, nominal area 1.5 sq mm FR with stranded copper conductor 1100 volts grade drawn into and incl rigid PVC conduit (concealed) 19 mm internal dia with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sq mm unsheathed copper conductor earth wire connected to earth dolly incl CI/MS boxes 1.6 mm thick with two coats of anticorrosive paint outside and aluminum paint inside sunk in wall with 3 mm thick laminated bakelite Hylam/Arkay light brand sheet cover (white) for mounting of switches, sockets and switch sockets, regulators as required complete all as specified and directed for the following :-\nNote :-1 The rates of chase cutting on wall concealing conduit and steel terminal boxes are included in the unit rates.\n2 Colour code of wire will be strictly followed , Red for Phase , Black for neutral and green for earth wire | |||
| 160 | 160 | One light/fluorescent tube light/fan/bell point controlled by one switch single pole one way complete all as specified and directed | 50 | Per point | |
| 161 | 161 | All as per item No. 159 Above but one 3 pin 5 amp switch socket out let independent complete all as specified and directed. | 20 | Per Point | |
| 162 | 162 | All as per item No.4 here inbefore but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by engineer incharge.. | 10 | Per Point | |
| 163 | 163 | One 3 pin 5 Amps socket out let independent but below the switch board of light point in the same vertical plane | 10 | Point | |
| 164 | 164 | All as per item No.159 Above but using 02 Nos. 4.0 sqmm size for main cable and 01 No.4.0 sqmm size as earth conductor for one 16 amp switch socket outlet on independent board complete all as specified and directed. | 20 | Per Point | |
| 165 | 165 | Supply & fix switch piano flush type, single pole one way, 5 Amp complete all as specified and directed | 80 | Each | |
| 166 | 166 | S&F socket out let 2/3 pin 5 Amps flush type complete all as specified and directed | 36 | Each | |
| 167 | 167 | S&F socket out let 2 in 1, 3pin5 & 15 Amps flush type complete all as specified and directed | 20 | Each | |
| 168 | 168 | Supply & fix switch piano flush type, single pole one way, 15 Amp complete all as specified and directed | 20 | Each | |
| 169 | 169 | S & F ceiling rose, surface bakelite, 65 x 50 mm,three terminals complete all as specified and directed. | 50 | Each | |
| 170 | 170 | Supply and Fix calling bell AC ding dong 220 volt multi music on wooden board complete all as specified and directed | 5 | Each | |
| 171 | 171 | Supply and fix bell push AC 220 volt single phase complete all as specified and directed | 5 | Each | |
| 172 | 172 | Supply and fix in repair bulkhead fitting enviornmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulkhead edgelit LED luminaire comprising of highbrightness LEDs of 10 watt complete all as specified and directed\nMake Havells cat part No- Rugby Neon 10WLED760SSYMBOPC or equivalent of other make Bajaj/Crompton | 10 | Each | |
| 173 | 173 | M & L for in replacement of Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FR, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and directed\nNote:- (a) Two runs of 6.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment.\n(b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish. | 50 | Per Running Metre | |
| 174 | 174 | Supply and fix in repair LED bulb 12 watt 2700K complete all as specified and directed | 60 | Each | |
| 175 | 175 | M & L for in replacement of Factory made sheet metal enclosure distribution boards, (protection class IP-42) double door, verticle type suitable for mounting MCCBS/ MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, triple pole and neutral, 8 ways, 415 volts complete all as specified and directed\nNote :- MCBs and MCCB shall be measured and paid for separately under respective item of this schedule. | 4 | EACH | |
| 176 | 176 | M & L for in replacement of Factory made sheet metal enclosure distribution boards, (protection class IP-42) double door, verticle type suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, triple pole and neutral, 4 ways, 415 volts complete all as specified and directed\nNote :- MCBs shall be measured and paid for separately under respective item of this schedule. | 4 | EACH | |
| 177 | 177 | Supply and fix in repair sheet metal enclosure SPN DB 230 volt distribution board (Protection class IP-42) double door suitable for mounting isolator fixing MCB conforming to IS 13032,IS 8626 BS 5484 with 200 Amp rating copper bus bar SP & N 8 way 240 volt complete all as specified and directed.\nNote- MCB Shall be measured and paid for separately | 2 | Each | |
| 178 | 178 | Supply and fix in repair MCCB four pole 160 Amp rating 36 KA 415volt 50 Htz adjustable type including spreader link for both side incomer and out going complete all as specified and directed. | 4 | Each | |
| 179 | 179 | Supply and fix in repair MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs catered herein before complete all as specified and directed. | 60 | EACH | |
| 180 | 180 | Supply and fix in repair MCB, SP, 230 volts, 35 to 63 Amp rating, 10 KA, C series fixed in DBs complete all as specified and directed. | 60 | EACH | |
| 181 | 181 | Supply and fix in repair MCB, single pole and neutral, 230 volts, 35 to 60 Amp rating, 'C' series fixed in DBs complete all as specified and directed. | 4 | EACH | |
| 182 | 182 | Supply and fixing in replacement of defective wall mounted light fittings, fancy type complete with holder suitble for LED bulbs/ of capacity upto 15 watts,omplete all as specified and directed .\nMake : Philips cat part No-31434 bronze or equivalent Havells/Bajaj | 50 | Each | |
| 183 | 183 | Supply and fix in replacement of surface mounted round LED down lighter with dome shape opal diffuser suitable for indoor use 18 watt 240 volt 50 Htz omplete all as specified and directed . \nMake Bajaj Cat No-BGCML 18W WH or equivelent Philips/Havells | 30 | Each | |
| 184 | 184 | Supply and fix in replacement of beautiful bedside light fitting flexible type 3 watt 3000k made out of metal & synthatic finish Philips model No-48042/30/31 colour white, black,gray or any other equivalent omplete all as specified and directed . \n | 10 | Each | |
| 185 | 185 | Supply and fixing in replacement of existing defective energy efficient tube light fitting of fitting of 10 watt integral sleek extruded aluminium LED channel 2 feet long with white acrylic cover wall mounted type complete all as specified and as directed \nMake :Havells, Model : LHEWEBP7IN1W010/ Philips cat no BN021 LED10S-6500 PSU GR S1/Crompton cat No LCCLB08 | 100 | Each | |
| 186 | 186 | Supply and fix in replacement of building security light luminaries LED 25 watt 240 volt made out aluminium housing toughened glass IP-65 protection 6500K including GI bracket nuts, bolts, clamp etc omplete all as specified and directed .\n Make Philips/Bajaj/Havells | 10 | Each | |
| 187 | 187 | Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion omplete all as specified and directed .\nNotes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I\n(ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate.\n(iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted. | 2 | EACH SET | |
| 188 | 188 | Supply and fix in replacement of Fresh air fan, AC, single phase 230 volts of size 200 mm sweep, plastic body with louvers and making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, single core, PVC insulated mulstistranded copper conductor FRLS cable from ceiling rose and making good the disturbed surface with existing colour matching omplete all as specified and directed .\nNote :- Fan shall be of Make- Havells Cat part No Ventil Air DX or equivalent model of make as specified in Appendix B to particular specifications. | 6 | EACH JOB | |
| 189 | 189 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. |
AI Tender Summary
Tender Timeline
Jun 20, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 17, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender