Work Of Providing , Laying , Jointing And Commissioning Of Various Size Of Hdpe Pipe Line With Allied Works For Various Wss Under Jurisdiction Of Phed Division Kekri
Tender Value
25 Lakhs
Estimated cost
Bid Submission
30 Jun 2020
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kekri → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Work Of Providing , Laying , Jointing And Commissioning Of Various Size Of Hdpe Pipe Line With Allied Works For Various Wss Under Jurisdiction Of Phed Division Kekri
BOQ
| Name of Work :- Work of Providing, Laying, jointing and commissioning of various size of HDPE pipe line with allied works for various WSS under jurisdiction of PHED Division Kekri (Ajmer) on Annual Rate Contract Basis. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Laying& Jointing HDPE pipe,PHED BSR-2019 and PWD BSR-2019 | |||
| 2 | 2 | Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) \nNote : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.\nSupply up to 110 mm dia. in coil & above 110 mm dia straight length in 6 M.(HDPE PE-80 , PN-6) | |||
| 3 | 2.1 | 90 mm dia | 1 | RM | |
| 4 | 2.2 | 110 mm dia | 1 | RM | |
| 5 | 2.3 | 125mm dia | 1 | RM | |
| 6 | 2.4 | 140 mm dia | 1 | RM | |
| 7 | 2.5 | 160 mm dia | 1 | RM | |
| 8 | 2.6 | 180mm dia | 1 | RM | |
| 9 | 2.7 | 200mm dia | 1 | RM | |
| 10 | 2.8 | 225 mm dia | 1 | RM | |
| 11 | 3 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.MS pipe specials upto 600 mm dia (with minimum 5.0 mm thickness sheet) | 1 | KG | |
| 12 | 4 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths DI standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet and jointing as per IS: 9523-2000 or as amended up to date, such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, taxes, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (excluding earth work). | |||
| 13 | 4.1 | A/S Tee , Bend, Reducer (All End Socketed) Upto 300 mm Diameter | 1 | KG | |
| 14 | 5 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | 1 | CUM | |
| 15 | 6 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : | |||
| 16 | 6.1 | Ordinary rock | 1 | CUM | |
| 17 | 6.2 | Hard rock (requiring blasting) useful material 30% | 1 | CUM | |
| 18 | 6.3 | Hard rock(blasting prohibited) useful material 30% | 1 | CUM | |
| 19 | 7 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. | |||
| 20 | 7.2 | M10 grade Nominal Mix \n1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | 1 | CUM | |
| 21 | 7.3 | M20 grade Nominal Mix \n1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). | 1 | CUM | |
| 22 | 8 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. \nM20 grade Nominal Mix / Design Mix Providing M-25 grade concrete by using min 410 kg of cement per cum instead of M-20 grade design mix. | 1 | CUM | |
| 23 | 9 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.\nM20 grade Nominal Mix / Design Mix | 1 | CUM | |
| 24 | 10 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.\nM20 grade Nominal Mix / Design Mix | 1 | CUM | |
| 25 | 11 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. | 1 | SQM | |
| 26 | 12 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : | |||
| 27 | 12.1 | Walls (any thickness) including attached pilasters, buttresses plinth and string course. | 1 | SQM | |
| 28 | 13 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. \n('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) | |||
| 29 | 13.1 | Hot rolled deformed bars (IS : 1139). | 1 | KG | |
| 30 | 14 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. | |||
| 31 | 14.1 | 1: 3: 6 or richer mix. | 1 | CUM | |
| 32 | 14.2 | 1: 4: 8 or leaner mix. | 1 | CUM | |
| 33 | 15 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres lead as per direction of Engineer-in-charge : | |||
| 34 | 15.1 | Water bound macadam road (average thickness 250 mm) | 1 | SQM | |
| 35 | 15.2 | bituminous road (average thickness 300 mm) | 1 | SQM | |
| 36 | 16 | Item Based on RUIIDP BSR 2017 | |||
| 37 | 17 | Providing, lowering, laying, aligning, fixing in position in pipe line, Resilient Seated D/F DI Sluice valves of approved make & design standard of following dia complete (including jointing & jointing material ) including all material, labour, testing and commissioning along with pipe line as per Technical Specification & as per direction of Engineer.Category \"B\".Mannually operated class PN 1.0 | |||
| 38 | 17.1 | 80 mm dia | 1 | Each | |
| 39 | 17.2 | 100 mm dia | 1 | Each | |
| 40 | 17.3 | 125 mm dia | 1 | Each | |
| 41 | 17.4 | 150 mm dia | 1 | Each | |
| 42 | 17.5 | 200 mm dia | 1 | Each | |
| 43 | 17.6 | 250 mm dia | 1 | Each | |
| 44 | 17.7 | 300 mm dia | 1 | Each |
AI Tender Summary
Tender Timeline
Jun 19, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJun 30, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 01, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender