Rural Development Government Departments Closing in 0 days TDR #24643432

Tender For Civil Works - Roads Work -L046 To Hananganj Mahadalit Tola ( Gaunkhap Me Rcd Road )

Issued by Government Departments · SHERGHATI, Bihar
Tender Value
1.12 Crore
Estimated cost
Bid Submission
26 Jun 2020
0 days left
EMD
2.25 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
SHERGHATI → Bihar
EMD Exemption
Not Available
Quantity
Not Available

Project Description

tender for Civil Works - Roads work -L046 To Hananganj Mahadalit Tola ( Gaunkhap Me Rcd Road )

BOQ

Name of Work: L046 TO HANANGANJ MAHADALIT TOLA
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Setting Out\nConstruction of Reference & Working Benchmarks1.527Km
22Construction of Reference Pillars/Burjees1.527Km
33Clearing and Grubbing Road Land\nClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.1.07Hect
44Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m\nExcavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.385.125Cum
55Construction of Embankment with Material Obtained from Borrow Pits\nConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000m as per Technical Specification Clause 301.5.1002.53Cum
66Construction of Embankment with Material Obtained from Borrow Pits\nConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 100m as per Technical Specification Clause 301.5.2339.24Cum
77Construction of Subgrade\nConstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.2980.29Cum
88Granular Sub-base with Well Graded Material (Table 400.1)\nConstruction of granular sub-base by providing well graded material (Crushed Stone Aggregates and Local Sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 401787.47Cum
99WBM GrIII\nProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.318.72Cum
1010Prime Coat\nProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per Technical Specification Clause 5022991.15Sqm
1111Tack Coat\nProviding and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.2991.15Sqm
1212Mix Seal Surfacing Bituminous With Waste Plastic\nProviding, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen (i.e. 92% of standard Bitumen and 8% waste processsed plastic by weight shall be used for coating aggregate after its heating) as per IRC:SP:98-2013, to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509.\nBy Mechanical Means2991.15Sqm
1313Cement Concrete Pavement M30\nConstruction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.455.94Cum
1414Brick Soling\nLaying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kN as per Technical Specification Clause 412745Sqm
1515Ordinary Kilometer Stone (Precast)3Each
1616200 m stone (precast)6Each
1717Boundary Pillar\nReinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 170430Nos
1818Painting two coats on new concrete surface\nPainting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701 (For culverts)89.28Sqm
1919Printing new letters & figures of any shade\nPrinting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and Technical Specification \nClause 1701\n(ii) English & Roman832Per cm ht. per letter
2020PMGSY Sign Board\nProviding and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.13Nos
2121Retro-reflectorised Traffic Signs\nProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801
2222600 mm Circular2Nos
2323600 mm equilateral triangle10Nos
2424600 mm x 450 mm rectangular4Nos
2525900 mm side octagon2Nos
2626Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.156.4Sqm
2727Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Cement Concrete Surface\nProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.149Sqm
2828Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.
2929(B) Cement Concrete2.43Cum
3030Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification Clause 202.\n(B) Cement Mortar92.07Cum
3131Removing all types of Hume pipes and stacking including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202.
3232Above 600 mm to 900 mm dia Hume pipe15RM
3333Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.103.77Cum
3434Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203\nPCC M-159.4Cum
3535Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203\nPCC M-2066.46Cum
3636Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203\nRCC M-2075.6Cum
3737Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 12023.024MT
3838Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204\n( PCC Grade M-20)42.57Cum
39391000MM Dia Pipe22.5RM
4040600MM Dia Pipe7.5RM
4141Laying Cement Concrete Pipe NP3(burried conduits) on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonary work in head wall and parapets70RM
4242Laying (First Class) bedding on well compacted sand, moorum or approved granular material as per Clause 1105 (ii) Type B (First Class) Bedding2.49Cum
4343Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9\n(i)Sand Filling27.02Cum
4444Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 130120.06Cum
4545Add 12.0% GST1RS
4646Add 1.0% Labour Cess1RS
4747Add Seigniorage1RS
48481st Year Maintenance1Year
49492nd Year Maintenance1Year
50503rd Year Maintenance1Year
51514th Year Maintenance1Year
52525th Year Maintenance1Year
5353Add 12.0% GST1RS
5454Add 1.0% Labour Cess1RS
5555Add Seigniorage Fee on Maintenance1RS

AI Tender Summary

OUR REF NO 24643432
AUTHORITY Government Departments
TENDER VALUE 1.12 Crore
LAST DATE 26-06-2020
Authority
Authority Name Rural Works Department
Work Description tender for Civil Works - Roads work -L046 To Hananganj Mahadalit Tola ( Gaunkhap Me Rcd Road )
Basic Detail
Tender No MMGSY-20-SHERGHATI-40
Bidding Type Tender
Location
City SHERGHATI
State Bihar
Key Dates
Publish Date 20 Jun 2020
Submission Date 26 Jun 2020
Open Date 26 Jun 2020
Finance
Tender Value 1.12 Crore
Tender Fee 10000
EMD 2.25 Lakhs
Exemption Not Available
Document List
SBDD.pdf
BOQ_161428.xls
04790D51-315C-44A9-A282-3EBDFBAB3241.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 20, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 26, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 26, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

SBDD.pdf

xls

BOQ_161428.xls

html

04790D51-315C-44A9-A282-3EBDFBAB3241.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender