| 1 | 1 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required. | 1 | | |
|---|
| 2 | 1.01 | a) 2 X 1.5 sqmm | 2 | 1100 | Mtr |
|---|
| 3 | 1.02 | b) 3 X 1.5 sqmm | 3 | 400 | Mtr |
|---|
| 4 | 1.03 | c) 4 X 1.5 sqmm | 4 | 100 | Mtr |
|---|
| 5 | 1.04 | d) 3 X 2.5 sqmm | 5 | 920 | Mtr |
|---|
| 6 | 2 | Supplying and fixing following way, single pole and neutral, sheetsteel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) | 6 | | |
|---|
| 7 | 2.01 | a) 12 way double door | 7 | 20 | Each |
|---|
| 8 | 3 | Supplying and fixing following way, horizontal type three poleand neutral, sheet steel, MCB distribution board, 415 V, onsurface/ recess, complete with tinned copper bus bar, neutralbus bar, earth bar, din bar, interconnections, powder paintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator) | 8 | | |
|---|
| 9 | 3.01 | a) 4 way (4 +12 way) double door | 9 | 4 | Each |
|---|
| 10 | 4 | Supplying and fixing of following sizes of medium classes PVC conduit alongwith accessories in surface/recess including painting in caseof surface conduit, or cutting the wall and making good the samein case of recessed conduit as required. | 10 | | |
|---|
| 11 | 4.01 | a) 20 mm | 11 | 850 | Mtr |
|---|
| 12 | 4.02 | b) 25 mm | 12 | 450 | Mtr |
|---|
| 13 | 5 | Supply of the following XLPE power cable with PVC insulated and PVC Sheathed Armoured alluminiun conductor under ground cable confirming to IS -7098 1.1 KV grade at site of work .etc as req of the following make Paragon/Gloster/Havells/Grandlay/midlite/universal/polycab or Equivalent . | 13 | | |
|---|
| 14 | 5.01 | (a) 2x10 sqmm | 14 | 750 | Mtr |
|---|
| 15 | 5.02 | (b)4 X 25 sqmm | 15 | 400 | Mtr |
|---|
| 16 | 6 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. | 16 | | |
|---|
| 17 | 6.01 | a) Upto 35 sq. mm | 17 | 500 | Mtr |
|---|
| 18 | 7 | Laying and fixing of one number PVC insulated and PVC\nsheathed / XLPE power cable of 1.1 kV grade of following sizeon wall surface as required. | 18 | | |
|---|
| 19 | 7.01 | a) Upto 35 sq. mm (clamped with 1mm thick saddle) | 19 | 500 | Mtr |
|---|
| 20 | 8 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the RCC/ HUME/ METAL pipe as required. | 20 | | |
|---|
| 21 | 8.01 | a) Upto 35 sq. mm | 21 | 70 | Mtr |
|---|
| 22 | 9 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required. | 22 | | |
|---|
| 23 | 9.01 | a) Upto 35 sq. mm | 23 | 80 | Mtr |
|---|
| 24 | 10 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required | 24 | | |
|---|
| 25 | 10.01 | a) 4x25 sqmm | 25 | 20 | Each |
|---|
| 26 | 10.02 | b) 2x10 sqmm | 26 | 50 | Each |
|---|
| 27 | 11 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C”curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required. | 27 | | |
|---|
| 28 | 11.01 | a) Single pole | 28 | 180 | Each |
|---|
| 29 | 11.02 | b) Single pole & neutral | 29 | 22 | Each |
|---|
| 30 | 11.03 | c) Triple pole & neutral | 30 | 6 | Each |
|---|
| 31 | 12 | Supplying and fixing following piano type switch/ socket on theexisting switch box/ cover including connections etc. as required. | 31 | | |
|---|
| 32 | 12.01 | a) 5/6 amps switch | 32 | 10 | Each |
|---|
| 33 | 12.02 | b) 3 pin 5/6 amp socket outlet | 33 | 10 | Each |
|---|
| 34 | 12.03 | c) Bell push | 34 | 1 | Each |
|---|
| 35 | 12.04 | d) 15/16 amps switch | 35 | 5 | Each |
|---|
| 36 | 12.05 | e) 3 pin 15/16 amp socket outlet | 36 | 5 | Each |
|---|
| 37 | 13 | Supplying and fixing single pole blanking plate in the MCB DB complete etc. as required.existing | 37 | 10 | Each |
|---|
| 38 | 14 | Supplying and fixing call bell/ buzzer suitable for single phase,230 volts, complete as required. | 38 | 1 | Each |
|---|
| 39 | 15 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminatedsheet cover in front including painting etc as required. | 39 | | |
|---|
| 40 | 15.01 | a) 180mm X 100 mm X 60 mm deep | 40 | 3 | Each |
|---|
| 41 | 15.02 | b) 200mm X 150 mm X 60 mm deep | 41 | 3 | Each |
|---|
| 42 | 16 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. | 42 | 120 | Each |
|---|
| 43 | 17 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. | 43 | 3 | Set |
|---|
| 44 | 18 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm) | 44 | 90 | Mtr |
|---|
| 45 | 19 | Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 meter length along the pole for protection of under ground cable as required. | 45 | 12 | Each |
|---|
| 46 | 20 | Supplying, installation . Testing and commissioning of cromptom/wipro/Bajaj make 27 watt LED VERDANT NEO WELLGLASS Luminaire pressure die cast /Bajaj Verdant NEO LED cat No.BGWD27WLED XE WH-27 Watt LED with control gear housing with heat resistant glass /opel accuricle /clear accuralic bowel Eye Bolt /brackit provided for mounting purpose and fixing on truss /wall/ pole with suitable clamps and nut bolts including giving connection testing etc at site of work as required.(make: romptom/wipro/Bajaj make 27 watt LED VERDANT NEO Wellglass cat No.BGWD27WLED XE WH-27 Watt LED ewtc as req. | 46 | 55 | Each |
|---|
| 47 | 21 | Supplying/Installation/ Tessting/ Commissioning of of stove enamelled single rectangular box type batten for LED tube and LED T/L rod 18 watt cool white of make Bajaj type BLRB-DB-118 and BLRB 18 W CW respectively or its equivalent of Crompton or Phillips /Wipro including connection and fixing etc. directly on wall with round block or on truss with clamps complete as required. | 47 | 120 | Each |
|---|
| 48 | 22 | Supply & fixing 1200mm ceiling fan ISI marked capacitor type with double ball bearing suitable for single phase AC 230 volt 50Hz conforming to IS 374/1979 with amdt. No. 1 to 6 make Usha/Orient/Bajaja/Crompton etc. | 48 | 2 | Each |
|---|
| 49 | 23 | Supplying, installation . Testing and commissioning of cromptom make 45 watt LED street light fitting cat no LSTO-45-CDL / BAJAJ BRTFG45WLED with Driver , pressure die cast . aluminiun housing heat resistant toughened glass with frame , IP 66 protection better optics for uniform distribution and fixing on wall/truss/pole with suitable clamps and nut bolts including giving connection testing etc at site of work as required.(make: cromptoncat no LSTO-45-CDL/BAJAJ BRTFG45WLED/ PHILIPS ) | 49 | 22 | Each |
|---|
| 50 | 24 | Supply,instt/testing commissioning of approved make Fresh air Fan, A.C. 230-250 volts with complet finished and as required. Crompton / Havells / Usha / Khaitan/Bajaj. (a) 250 mm | 50 | 1 | Each |
|---|
| 51 | 25 | Supply of 2mtrx1mtrx6mm corrugated rubber mat as require conform to ISI specification suitable for electrical application etc. | 52 | 2 | Each |
|---|
| 52 | 26 | Supply,installation, testing & commissioning of feeder piller cable junction box make Hansel IP-65 catalog No.MI o201 T OPAQUE LID type made of thermoplastic, poly carbonate enclosure weather proof, dust proof, water proof and shock proof internally embedded gasket with cable entry through IP-65 thromo plastic cable glands. Seperate for incoming and outgoing cable and wie. The box should be fixed with G.I.clamps size 25x5 mm & G.I.nuts & bolts at the suitable height on exisintpole. Feeder piller is comprised of the following components. Material 1. Feeder piller cable junction box make hensel IP-66 catalog No. MI 0201 T size 300x300x170 mm - 1 No\n2.Terminal Set 25 Sq mm 5 pole catelog No KLS25 - 1 Set 3. Angle iron stand size 25x25x5 mm with leg of 600 mm with Nut ,bolt,cement and the send etc. | 53 | 3 | Each |
|---|
| 53 | 27 | Supplying of street light pole cable junction box make Hensel IP-65 size 167x125x82mm catalog no.K-9105 with 5 nos SP connector made of thermo plastic, polystrene /polycarbonate enclosure, weather proof, rust proof, water proof ,self extinguishing and fire reatardant glow wire test at 750 c and above internally embadded gasket with provision of cable entry through compression glands of size 2x10sqmm seperate for incoming and outgoing cable. The box should be fixed with MSclaims size 16 SWG x 25 mm& G.I. nuts & bolts with the pole /truss at the suitable height etc. as required. | 54 | 22 | Each |
|---|
| 54 | 28 | CREDIT ITEMs:- | 55 | | |
|---|
| 55 | 28.1 | Dismantled scraped MS conduit pipe of different sizes, DB’s, GI wire and clamps | 56 | 1000 | KG |
|---|
| 56 | 28.2 | Dismantled Aluminium insulated wire (scrap) | 57 | 100 | KG |
|---|
| 57 | 28.3 | 150/250 HPSV/MV FITTING | 58 | 10 | Each |
|---|
