Tsm-Sabarimala-Construction Of Resting Place At Sannidhanam ( Re-Tender )
Tender Value
5.62 Crore
Estimated cost
Bid Submission
30 Jun 2020
0 days left
EMD
2 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
PUTHENCHANTAI → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tsm-Sabarimala-Construction Of Resting Place At Sannidhanam ( Re-Tender )
BOQ
| Name of Work: TSM-SABARIMALA-Construction of Resting place at Sannidhanam (Re-Tender) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Cutting and removing the exsisting barricad from the proposed site a. Assistant Fitter or 2nd class Fitter | item1 | 15 | Each |
| 2 | 2 | b. Coolie | item2 | 15 | Each |
| 3 | 3 | Assistant Fitter or 2nd class Fitter | item3 | 5 | Each |
| 4 | 4 | Coolie | item4 | 10 | Each |
| 5 | 5 | Earth work in excavation by mechanical means(Hydraulic excavator)/manuel means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm. On plan), including dressing of sides and ramming of bottoms, lift upto1.5m, including getting out of the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.\nAll kinds of soil | item5 | 1500 | Cu.m |
| 6 | 6 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. | item6 | 2000 | Cu.m |
| 7 | 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) for column | item7 | 250 | Cu.m |
| 8 | 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) for column footing | item8 | 200 | Cu.m |
| 9 | 9 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | item9 | 300 | Sq.m |
| 10 | 10 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | item10 | 60 | Cu.m |
| 11 | 11 | Centering and shuttering including strutting, propping etc. and removal of form : Columns, Pillars, Piers, Abutments, Posts and Struts | item11 | 445 | Sq.m |
| 12 | 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) for plinth beam | item12 | 240 | Cu.m |
| 13 | 13 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers | item13 | 1600 | Sq.m |
| 14 | 14 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) for seating of the slab | item14 | 7 | Cu.m |
| 15 | 15 | Centering and shuttering including strutting, propping etc. and removal of form : Suspended floors, roofs, landings, balconies and access platform | item15 | 60 | Sq.m |
| 16 | 16 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) | item16 | 450 | Cu.m |
| 17 | 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars grade Fe-500 D or more. | item17 | 50700 | Kg |
| 18 | 18 | Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | item18 | 35 | Cu.m |
| 19 | 19 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | item19 | 5000 | Kg |
| 20 | 20 | Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer. | item20 | 30 | Sq.m |
| 21 | 21 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | item21 | 6000 | Kg |
| 22 | 22 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes | item22 | 100000 | Kg |
| 23 | 23 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | item23 | 4500 | Sq.m |
| 24 | 24 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm | item24 | 260 | Sq.m |
| 25 | 25 | Plastering walls with cement mortar 1:4, 12mm thick including cost of all materials, labour, scaffolding, curing etc. complete. | item25 | 350 | Sq.m |
| 26 | 26 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge: All kinds of soil | item26 | 3600 | Sq.m |
| 27 | 27 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry@ 3.3kg/sqm. including pointing the joints with white cement and matching pigments etc., complete. | item27 | 15 | Sq.m |
| 28 | 28 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | item28 | 60 | Sq.m |
| 29 | 29 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | item29 | 16 | Nos. |
| 30 | 30 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredWhite Vitreous china Orissa pattern W.C. pan of size\n580x440 mm with integral type foot rests | item30 | 16 | Nos. |
| 31 | 31 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | item31 | 3600 | Sq.m |
| 32 | 32 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | item32 | 20400 | Kg |
| 33 | 33 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Side handrail | item33 | 17800 | Kg |
| 34 | 34 | Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/ 10 sqm) | item34 | 700 | Sq.m |
| 35 | 35 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work for exterior wall | item35 | 700 | Sq.m |
| 36 | 36 | Applying priming coat\nWith ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works | item36 | 170 | Sq.m |
| 37 | 37 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work for steel works | item37 | 600 | Sq.m |
| 38 | 38 | providing water supply and sanitory fittings including sewage screening treatment facility complete. Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling &\ntesting of joints complete as per direction of Engineer in Charge. a. 25 mm nominal outer dia Pipes | item38 | 250 | M |
| 39 | 39 | b. 32 mm nominal outer dia Pipes | item39 | 250 | M |
| 40 | 40 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia for laying GI pipes | item40 | 3000 | M |
| 41 | 41 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. From pandithavalm tank top saramkuthy 100mm dia pipe \nSay 2860 Mtr/12.5 kg/m=35750 kg | item41 | 36000 | Kg |
| 42 | 42 | Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 150 mm diameter \nClass II | item42 | 10 | Nos. |
AI Tender Summary
Tender Timeline
Jun 16, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJun 30, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 03, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender