Department Of Local Bodies has published Supply Of 2 E-Auto For Door To Door Garbage Waste Collection , 1 E Auto For Lifting Dead Animals And 1 Gutter Cleaning Machine In Nagar Palika. Submission Date for this Tender is 15-06-2020. Battery Operated Vehicle Tenders in aklera Rajasthan. Bidders can get complete Tender details and download the document.
| Name of Work: Supply of 2 E-Auto for Door to Door Garbage waste collection, 1 e auto for lifting dead animals and 1 Gutter cleaning machine in Nagar Palika | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply of E-Auto with all necessary spare parts and should be specifically approved for waste collection as per central motor vechicle rules with respect to all specification as below. Maximum Speed : 25 K.M. per Hour. Speedometer : with trip meter. It should have features as power gear for Fly over, HML for speed control. Vehicle should be ARAI approved . Body Material : Metallic. Garbage Box Material : Mild Steel 16 gauge. base minimum 2.5mm. side minimum 1.5mm with anti rust coating, anti rust enamel. Paint : Powder coated, colour : garbage box blue and green . The garbage box should be designed for segregated waste collection (50:50). Body sheet should be made of anti corrosive material. Battery capacity : 100-125, Motor Power : minimum BLDC 48 V. and Unit minimum 1000 W. Controller : 24 tubes 50 amp. Load capacity : around 310 Kg. Electric Hydraulic Single/Double Lift. Automatic Charger 15 Ah. Charging time 8-10 hours. Fibre roof for driver and full glass at front with windshield wiper motor.. Minimum 6 months warranty on motor, charger, battery and with minimum 4 on site after sales services. | BI01010001010000000000000515BI0100001113 | 1 | Each |
| 2 | 2 | Supply of e auto , specially designed for lifting dead cow pig and other animals. Vehicle chasis should be hard enough to carry heavy animals, other technical specifications should be same as above for garbage vehicles. | BI01010001010000000000000515BI0100001114 | 1 | Each |
| 3 | 3 | Supply of Gutter cleaning machine mounted on a suitable trailer chassis, which can be towed to the work area by a suitable agricultural tractor. The high performance exhauster / compressor should be operated in both vacuum and pressure mode. The unsparing chassis should be manufactured from ISMC 150 sections and should be of an all electrically welded construction. The sludge tank should be fastened to the long bearers through saddles at 4 points by H.T. nut bolts, The tow bar should be all electrically welded, and fabricated out of two ISMC box sections. An all forged, spring loaded steel tow eye, and a retractable stand should be fitted onto the tow bar. The sludge tank of the equipment shall be fabricated from the standard structural gauge steel plates of 5 mm thick confirming of IS 2062 Grade - A. The tank should be designed to withstand suction and over pressure operating conditions. The tank shall be fabricated and finished to the best quality standards and as per standard engineering practice. Mounting of equipment TECHNICAL specs:- Overall Length : 4800 mm (approx.),Overall width : 2000 mm (approx.) Wheel track : 1500 mm, GLW : 4000 Kg, Tyre size : 7.50 X 16 X 12 PLY X 2 Nos..Technical specs:-Capacity : 3000-3500 LTRS,Construction : Cylindrical, shell with torispherical dished ends,Tank built to ASME code section VIII, DIV -I., Material : 5-mm thick plates for shell, dished ends, & internal compartment walls as per IS 2062 Grade - ‘A’ Max. Operating : 0.95 TO 1.5 bar tank pressure Test pressure : 1.5 bar. SUCTION HOSE :10 mtrs of 75 mm dia, suction Green hose, of heavy duty PVC in one section fitted with quick connect hose couplings should be supplied. the exhauster / compressor supplied should be of good make, having a capacity of a minimum 2600 Liter’s per minute free air flow. It should be capable of creating a maximum vacuum of 90% and will empty chambers from a max depth of approximately 7 to 8 Meters. The exhauster compressor should be provided with: Air-cooling system, Incorporated Lubricating Oil Pump, Incorporated Check valve, Incorporated 4 - way valve. The exhauster / compressor working in suction and over pressure modes through the tank shall be provided with various safety devices like ball valve to prevent over suction, moisture traps vacuum and pressure relief valves, check valves etc., to ensure the safe and reliable operations. Discharge to atmosphere will be through an oil breather/filter, which also acts as a silencer, The blower should have 13300 LPM, Engine should be 25hp double cylinder, and take 10-15 min for littering the tank of 3000 ltr, Machine should be suitable for continuous duty, for both wet & dry Material. And suction upto depth of 30 feet.TECHNICAL specs: - Quantity : 1 Pump, System : Rotary vane compressor, Vacuum pump ,Delivery : 2600 lpm, Capacity (Max) : @ 1300 rpm ,Max Vacuum : 90%, Max Operating Vacuum : 200 mbar (80% Vacuum), Max. Pressure 1.5 bar, Max. Operating 1.0 bar Pressure, Lubrication : Force Feed. Incorporated, Lubricating pump ,Cooling : Air-cooled , Back up guarantee : Certificate from supplier will be produced. DRIVE : The exhauster / compressor unit should be driven by a single cylinder, 5 HP, 4 Stroke; handle start, Diesel engine, of a reputed Indian make engine, which has advantage of being easy spare parts availability. The complete unit will be driven over a Flexible coupling arrangement. PAINTING/FINISHING OF THE COMPLETE UNIT:-The tank exterior shall be spray painted with two coats of superior quality anticorrosive primer and two coats of enamel metal paint of a reputed make. To resist corrosion due to weak acids, the tank interior should be coated with 2 coats of anti-corrosive primer and a further two coats of gray epoxy paint\n\n\n\n\n\n\n\n | BI01010001010000000000000515BI0100001115 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
