Frame Clamped Cutting Machine-Assam

Supply Of , Frame Clamped Cutting Machine Having A Strong And Rigid Clamping Arrangement Made Of Tough, Durable And Light Weight Material Having Sufficient Mechanical Strength. The Rivet/Bolts Used In The Clamp Shall Be Of High Tensile Category. The Guard Shall Be Made Of Good Quality Non Combustible Light Weight Material To Prevent The Sparks And Iron Chips Emitted During Cutting Operation. There Shall Be Sufficient Space Between New Wheel And Guard Periphery. The Maximum Angular Exposure Of The Abrasive Wheel Periphery And Sides For Safety Guards Shall Not Exceed 1800 . In This Regard Is : 1991 (Part-4) %U2013 1988 Shall Be Referred To. The Machine Shall Be Capable Of Cutting All Types Of Flat Bottom Rails Being Used In Indian Railways And Of Any Metallurgy Up To 110 Uts. The Machine Shall Have A Strong And Rigid Clamping Arrangement Which Shall Fix The Machine On Rail Near The Cutting Location. The Clamping Arrangement Shall Have A Suitable Location Pointer To Mark The Cutting Point On The Rail. The Fixing And Removing Mechanism Shall Be Easy And Quick In Nature. The Machine While Attached With Clamp During Cutting Operation Shall Not Be Loosen/Misaligned And Shall Be So Attached With The Clamp That It Can Swing Vertically. The Machine Shall Be So Designed That There Shall Be Minimum Or No Vibration During Operation To Avoid Possibility Of Misalignment And Breakage Of The Wheel. Make Bosch Or Similar With One Year On Site Warranty., Frame Clamped Cutting Machine Having A Strong And Rigid Clamping Arrangement Made Of Tough, Durable And Light Weight Material Having Sufficient Mechanical Strength. The Rivet/Bolts Used In The Clamp Shall Be Of High Tensile Category. The Guard Shall Be Made Of Good Quality Non Combustible Light Weight Material To Prevent The Sparks And Iron Chips Emitted During Cutting Operation. There Shall Be Sufficient Space Between New Wheel And Guard Periphery. The Maximum Angular Exposure Of The Abrasive Wheel Periphery And Sides For Safety Guards Shall Not Exceed 1800 . In This Regard Is : 1991 (Part-4) %U2013 1988 Shall Be Referred To. The Machine Shall Be Capable Of Cutting All Types Of Flat Bottom Rails Being Used In Indian Railways And Of Any Metallurgy Up To 110 Uts. The Machine Shall Have A Strong And Rigid Clamping Arrangement Which Shall Fix The Machine On Rail Near The Cutting Location. The Clamping Arrangement Shall Have A Suitable Location Pointer To Mark The Cutting Point On The Rail. The Fixing And Removing Mechanism Shall Be Easy And Quick In Nature. The Machine While Attached With Clamp During Cutting Operation Shall Not Be Loosen/Misaligned And Shall Be So Attached With The Clamp That It Can Swing Vertically. The Machine Shall Be So Designed That There Shall Be Minimum Or No Vibration During Operation To Avoid Possibility Of Misalignment And Breakage Of The Wheel. Make Bosch Or Similar With One Year On Site Warranty.

Refer document

Refer document

Refer document

	0	1	2	3	4	5	6	7	8	9
0	S.No.	PL Code\r(Group)	Item Type\rGST(Y/N)	Stock /\rNonStock	Ordering	Consider\rFor Eval	Approving\rAgency	Inspection\rAgency	Currency\rAllowed	Estimated\rRate
1	1	6025N001	Goods (Y)	Non Stock	---	Yes		CONSIGNEE	INR
2		Description :Frame clamped cutting machine having a strong and rigid clamping arrangement made of tough,\rdurable and light weight material having sufficient mechanical strength. The rivet/bolts used in the clamp shall be\rof high tensile category. The guard shall be made of good quality non combustible light weight material to prevent\rthe sparks and iron chips emitted during cutting operation. There shall be sufficient space between new wheel and\rguard periphery. The maximum angular exposure of the abrasive wheel periphery and sides for safety guards\rshall not exceed 1800 . In this regard IS : 1991 (part-4) %u2013 1988 shall be referred to. The machine shall be\rcapable of cutting all types of flat bottom rails being used in Indian Railways and of any metallurgy up to 110 UTS.\rThe machine shall have a strong and rigid clamping arrangement which shall fix the machine on rail near the\rcutting location. The clamping arrangement shall have a suitable location pointer to mark the cutting point on the\rrail. The fixing and removing mechanism shall be easy and quick in nature. The machine while attached with\rclamp during cutting operation shall not be loosen/misaligned and shall be so attached with the clamp that it can\rswing vertically. The machine shall be so designed that there shall be minimum or no vibration during operation to\ravoid possibility of misalignment and breakage of the wheel. Make Bosch or similar with one year on site\rwarranty.
3		Consignee	SSE/P.WAY/C/LMG AT JID	Assam	2.00 Numbers
4	6025N002	Goods (Y)	Non Stock	---	Yes		CONSIGNEE	INR