}
  • Home   ›
  •   Indian Tenders   › Tender Notice : 24549152

    • Procurement Of Spares For Centrifugal Pumps At Ytps-Karnataka

    Karnataka Power Corporation Limited has published Procurement Of Spares For Centrifugal Pumps At Ytps. Submission Date for this Tender is 11-07-2020. Spare Part Tenders in Karnataka. Bidders can get complete Tender details and download the document.




    Tender Notice

    24549152
    Procurement Of Spares For Centrifugal Pumps At Ytps
    Open Tender
    Indian
    Karnataka
    11-07-2020

    Tender Details

    Procurement Of Spares For Centrifugal Pumps At Ytps 1. Coupling For Cw Make Up Pump, 2. Fastener Set For Cw Pump, 3. Coupling Set For Swp, 4. Fasteners Set For Swp, 5. Shaft ( Chp Dust Suppression P ) , 6. Casing Ring ( Chp Dust Suppres ) , 7. Shaft Sleeve ( Chp Dust Suppre ) , 8. Gland For Chp Dsp, 9. Sleeve Nut ( Chp Dust Suppress ) , 10. Bearing Lock Nut ( Chp Dust Su ) , 11. Inboard Bearing House ( Chp Du ) , 12. Outboard Bearing House ( Chp D ) , 13. Bearing Cover ( Chp Dust Suppr ) , 14. Coupling Key ( Chp Dust Suppre ) , 15. Bearing Lock Washer ( Chp Dust ) , 16. Adopter, 17. O Ring ( Sleeve ) For Chp Dsp, 18. Stuffing Box For Chp Dsp, 19. Air Cock For Chp Dust Pump, 20. Grease Nipple For Chp Dust Pum, 21. Eye Bolt For Chp Dust Supp Pump, 22. Braided Hose For Chp Dust Supp, 23. Coupling Set For Chp Dust Supp, 24. Fasteners Set For Chp Dust Sup, 25. Lock Nut ( Sludge Transfer Pum ) , 26. Lock Washer ( Sludge Transfer ) , 27. Ratchen Pin ( 1Set =2Nos ) , 28. Ratchen Collar, 29. Bearing Collar, 30. Bearing Cap ( Sludge Transfer ) , 31. Bearing Housing ( Sludge Trans ) , 32. Lock Nut ( Sludge Pump ) , 33. Gland ( 1No=2 Halves ) , 34. Gland Housing, 35. Gland Ring, 36. Drive Shaft ( Sludge Transfer ) , 37. Line Shaft, 38. Pump Shaft ( Sludge Transfer P ) , 39. Drive Column Pipe, 40. Line Column Pipe, 41. Pump Column Pipe, 42. Coupling Sleeve Set, 43. Strainer, 44. Shaft Sleeve ( P.End ) , 45. Bush Housing, 46. Impeller Nut ( Sludge Transfer ) , 47. Gasket Set ( 1Set=15 Nos ) , 48. Volute Casing For Stp, 49. Coupling Set For Sludge Transf, 50. Casing Cover ( Etp Supply Pump ) , 51. Pump Shaft ( Etp Supply Pump ) , 52. Bearing Housing Lantern, 53. Bearing Bed ( Etp Supply Pump ) , 54. Bearing Cap ( Outer ) ( Etp Supp ) , 55. Bearing Cap ( Inner ) ( Etp Supp ) , 56. Gasket ( Brg Cap Outer ) For Etp, 57. Key ( Coupling ) , 58. Oil Seal ( For Etp Pump ) , 59. Grooved Nut And Lock Washer, 60. Coupling Set For Etp Pump, 61. Deflector For Etp, 62. Constant Level Oiler For Etp, 63. Key Impeller For Etp, 64. Gland For Etp, 65. Gland Packing Set For Etp, 66. Pressure Ring For Etp, 67. Shaft Sleeve For Etp,

    Key Value

    Document Fees
    INR 550 /-
    EMD
    INR 7700.0 /-
    Tender Value
    Refer document

    BOQ Items

    Sl No Item Code Item Name Item Description Unit Quantity
    1
    		 581030229Y COUPLING FOR CW MAKE UP PUMP SPECIFICATION: coupling for CWP PUMP MODEL:14 A 20 B MOC:IS 210 FG 260.
    sets
    1
    2
    		 581030230Y FASTENER SET FOR CW PUMP SPECIFICATION: fasteners set for CW MAKE UP PUMP MOC:AISI 316 MODEL:14 A 20 B
    sets
    1
    3
    		 581050233Y COUPLING SET FOR SWP SPECIFICATION: COUPLING set (1set = 5 Nos) For SWP PUMP. MODEL:ZM II 440/00 MOC:IS 210 FG 260
    sets
    1
    4
    		 581050234Y FASTENERS SET FOR SWP SPECIFICATION: FASTENERS set For SWP PUMP. MODEL:ZM II 440/00 MOC:IS Gr.B7
    Set
    1
    5
    		 581060203Y SHAFT (CHP DUST SUPPRESSION P) SPECIFICATION: Shaft for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC : AISI 410
    Nos
    1
    6
    		 581060204Y CASING RING (CHP DUST SUPPRES) SPECIFICATION: Casing ring for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC :ASTM A 743 CF8M (SS316)
    Nos
    2
    7
    		 581060206Y SHAFT SLEEVE (CHP DUST SUPPRE) SPECIFICATION: Shaft sleeve for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC : AISI 410
    Nos
    2
    8
    		 581060208Y GLAND FOR CHP DSP SPECIFICATION: GLAND for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC : ASTM A 743 CF8M
    Nos
    2
    9
    		 581060211Y SLEEVE NUT (CHP DUST SUPPRESS) SPECIFICATION: Sleeve nut for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC : AISI 410
    Nos
    2
    10
    		 581060212Y BEARING LOCK NUT (CHP DUST SU) SPECIFICATION: Bearing lock nut for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC : SAE 1018 / 1020
    Nos
    2
    11
    		 581060214Y INBOARD BEARING HOUSE (CHP DU) SPECIFICATION: Inboard bearing house for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC : IS 210 FG 260
    Nos
    1
    12
    		 581060216Y OUTBOARD BEARING HOUSE (CHP D) SPECIFICATION: Outboard bearing house for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC :IS 210 FG 260
    Nos
    1
    13
    		 581060217Y BEARING COVER (CHP DUST SUPPR) SPECIFICATION: Bearing cover for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC :IS 210 FG 260
    Nos
    2
    14
    		 581060218Y COUPLING KEY (CHP DUST SUPPRE) SPECIFICATION: Coupling key for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC : BS 970 EN 8
    Nos
    2
    15
    		 581060219Y BEARING LOCK WASHER (CHP DUST) SPECIFICATION: Bearing lock washer for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC : IS 513 CRCA SHEET
    Nos
    2
    16
    		 581060220Y ADOPTER SPECIFICATION: Adopter for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC : IS 210 FG 260
    Nos
    1
    17
    		 581060228Y O RING (SLEEVE) FOR CHP DSP SPECIFICATION: O RING SLEEVE for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC : NEOPRENE RUBBER
    Nos
    2
    18
    		 581060229Y STUFFING BOX FOR CHP DSP SPECIFICATION: STUFFING BOX for CHP DUST SUPPRESSION PUMP Pump Model : 8 AD 13.5 MOC : ASTM A 743 CF8M
    Nos
    1
    19
    		 581060230Y AIR COCK FOR CHP DUST PUMP SPECIFICATION: AIR COCK For CHP DUST SUPP PUMP. MODEL:8 AD 13.5 MOC:STEEL
    Nos
    2
    20
    		 581060231Y GREASE NIPPLE FOR CHP DUST PUM SPECIFICATION: GREASE NIPPLE For CHP DUST SUPP PUMP. MODEL:8 AD 13.5 MOC:BS 970 EN 8
    Nos
    4
    21
    		 581060232Y EYE BOLT FOR CHP DUST SUPP PUMP SPECIFICATION: EYE BOLT For CHP DUST SUPP PUMP. MODEL:8 AD 13.5 MOC:FORGED STEEL
    Nos
    1
    22
    		 581060233Y BRAIDED HOSE FOR CHP DUST SUPP SPECIFICATION: BRAIDED HOSE FOR CHP DUST SUPP PUMP. MODEL:8 AD 13.5 MOC:MS
    Nos
    2
    23
    		 581060234Y COUPLING SET FOR CHP DUST SUPP SPECIFICATION: COUPLING SET For CHP DUST SUPP PUMP. MODEL:8 AD 13.5 MOC:IS 210 FG 260
    sets
    1
    24
    		 581060235Y FASTENERS SET FOR CHP DUST SUP SPECIFICATION: fasteners set For CHP DUST SUPP PUMP. MODEL:8 AD 13.5 MOC:AISI 316
    sets
    1
    25
    		 581070202Y LOCK NUT (SLUDGE TRANSFER PUM) SPECIFICATION: Lock Nut for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : BS 970 EN 8
    Nos
    1
    26
    		 581070203Y LOCK WASHER (SLUDGE TRANSFER ) SPECIFICATION: Lock Washer for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : IS 1363 MS
    Nos
    2
    27
    		 581070204Y RATCHEN PIN (1SET =2NOS) SPECIFICATION: Ratchen Pin (1Set =2Nos) for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : AISI-410
    Set
    4
    28
    		 581070205Y RATCHEN COLLAR SPECIFICATION: Ratchen Collar for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : IS 2062 MS
    Nos
    2
    29
    		 581070206Y BEARING COLLAR SPECIFICATION: Bearing Collar for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : IS 2062 MS
    Nos
    2
    30
    		 581070207Y BEARING CAP (SLUDGE TRANSFER ) SPECIFICATION: Bearing Cap for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : IS 210 FG 260
    Nos
    2
    31
    		 581070208Y BEARING HOUSING (SLUDGE TRANS) SPECIFICATION: Bearing Housing for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : IS 210 FG 260
    Nos
    1
    32
    		 581070209Y LOCK NUT (SLUDGE PUMP) SPECIFICATION: Lock Nut for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : BS 970 EN 8
    Nos
    2
    33
    		 581070210Y GLAND (1NO=2 HALVES) SPECIFICATION: Gland (1No=2 Halves) for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : IS 210 FG 260
    Nos
    1
    34
    		 581070211Y GLAND HOUSING SPECIFICATION: Gland Housing for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : IS 210 FG 260
    Nos
    1
    35
    		 581070214Y GLAND RING SPECIFICATION: Gland Ring for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : IS 318 GR. 2
    Nos
    2
    36
    		 581070217Y DRIVE SHAFT (SLUDGE TRANSFER ) SPECIFICATION: Drive Shaft for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : AISI 410
    Nos
    1
    37
    		 581070218Y LINE SHAFT SPECIFICATION: Line Shaft for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : AISI 410
    Nos
    1
    38
    		 581070219Y PUMP SHAFT (SLUDGE TRANSFER P) SPECIFICATION: PUMP Shaft for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : AISI 410
    Nos
    1
    39
    		 581070220Y DRIVE COLUMN PIPE SPECIFICATION: Drive Column Pipe for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : IS 1239 PART I HEAVY
    Nos
    1
    40
    		 581070221Y LINE COLUMN PIPE SPECIFICATION: Line Column Pipe for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : IS 1239 PART I HEAVY
    Nos
    1
    41
    		 581070222Y PUMP COLUMN PIPE SPECIFICATION: Pump Column Pipe for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : IS 1239 PART I HEAVY
    Nos
    1
    42
    		 581070223Y COUPLING SLEEVE SET SPECIFICATION: Coupling Sleeve Set (1 Set Consist of Coupling Sleeve -1No, Coupling Ring -2Nos, Coupling Nut -2Nos) for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : AISI 410
    Nos
    1
    43
    		 581070230Y STRAINER SPECIFICATION: Strainer for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : IS 1239 PART I HEAVY
    Nos
    1
    44
    		 581070231Y SHAFT SLEEVE (P.END) SPECIFICATION: Shaft Sleeve (P. End)for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : AISI 410
    Nos
    2
    45
    		 581070232Y BUSH HOUSING SPECIFICATION: Bush Housing for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC :IS 210 FG 260
    Nos
    1
    46
    		 581070234Y IMPELLER NUT (SLUDGE TRANSFER) SPECIFICATION: Impeller Nut for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC :AISI- 316
    Nos
    2
    47
    		 581070235Y GASKET SET (1SET=15 NOS) SPECIFICATION: Gasket Set (1Set=15 Nos) for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : CAF-9 / TEFLON
    Nos
    1
    48
    		 581070241Y VOLUTE CASING FOR STP SPECIFICATION: VOLUTE CASING for SLUDGE TRANSFER PUMP Pump Model : VO 80/300+TCH+N MOC : IS 210 FG 260
    Nos
    1
    49
    		 581070243Y COUPLING SET FOR SLUDGE TRANSF SPECIFICATION: COUPLING set (1 set = 5 Nos) For SLUDGE TRANSFER PUMP. MODEL:VO 80/300 +TCH+N MOC:IS 210 FG 260
    sets
    1
    50
    		 581080202Y CASING COVER (ETP SUPPLY PUMP) SPECIFICATION: Casing cover for ETP pump. MOC:IS 210 FG 260 MODEL:CPC 125/260.
    Nos
    1
    51
    		 581080204Y PUMP SHAFT (ETP SUPPLY PUMP) SPECIFICATION: Pump Shaft for ETP pump. MOC:AISI 410 MODEL:CPC 125/260.
    Nos
    1
    52
    		 581080208Y BEARING HOUSING LANTERN SPECIFICATION: Bearing Housing Lantern for ETP pump. MOC:IS 210 FG 260 MODEL:CPC 125/260.
    Nos
    1
    53
    		 581080209Y BEARING BED (ETP SUPPLY PUMP) SPECIFICATION: Bearing Bed for ETP pump. MOC:IS 210 FG 260 MODEL:CPC 125/260.
    Nos
    1
    54
    		 581080210Y BEARING CAP (OUTER) (ETP SUPP) SPECIFICATION: Bearing Cap (Outer) for ETP pump. MOC: IS 210 FG 260 MODEL:CPC 125/260.
    Nos
    1
    55
    		 581080211Y BEARING CAP (INNER) (ETP SUPP) SPECIFICATION: Bearing Cap (Inner) for ETP pump. MOC: IS 210 FG 260 MODEL:CPC 125/260.
    Nos
    1
    56
    		 581080214Y GASKET (BRG CAP OUTER) FOR ETP SPECIFICATION: gasket (brg cap outer)for ETP pump. MOC:PAPER (OIL RESISATANT). MODEL:CPC 125/260.
    Nos
    1
    57
    		 581080219Y KEY (COUPLING) SPECIFICATION: Key (Coupling) for ETP pump. MOC: AISI 410 MODEL:CPC 125/260.
    Nos
    1
    58
    		 581080220Y OIL SEAL (FOR ETP PUMP) SPECIFICATION: OIL SEAL for ETP pump. MOC: SYNATHETIC RUBBER MODEL:CPC 125/260.
    Nos
    2
    59
    		 581080223Y GROOVED NUT AND LOCK WASHER SPECIFICATION: GROOVED NUT AND LOCK WASHER for ETP pump. MOC: SAE1018/1020 IS 513 CRCA SHEET MODEL:CPC 125/260.
    Nos
    2
    60
    		 581080227Y COUPLING SET FOR ETP PUMP SPECIFICATION: coupling set (1set = 5 Nos) For ETP PUMP. MODEL:CPC 125/260 MOC:IS 210 FG 260
    sets
    1
    61
    		 581080228Y DEFLECTOR FOR ETP SPECIFICATION: DEFLECTOR For ETP PUMP. MODEL:CPC 125/260 MOC:AISI 304
    Nos
    2
    62
    		 581080230Y CONSTANT LEVEL OILER FOR ETP SPECIFICATION: CONSTANT LEVEL OILER For ETP PUMP. MODEL:CPC 125/260 MOC:AL AND PLASTIC
    Nos
    1
    63
    		 581080231Y KEY IMPELLER FOR ETP SPECIFICATION: KEY IMPLELLER For ETP PUMP. MODEL:CPC 125/260 MOC:AISI 316
    Nos
    2
    64
    		 581080232Y GLAND FOR ETP SPECIFICATION: gland For ETP PUMP. MODEL:CPC 125/260 MOC:IS 210 FG 260
    Nos
    2
    65
    		 581080233Y GLAND PACKING SET FOR ETP SPECIFICATION: GLAND PACKING set (1set = 5 Nos) For ETP PUMP. MODEL:CPC 125/260 MOC:TIWA MODEL:ZM II 375/06
    sets
    1
    66
    		 581080235Y PRESSURE RING FOR ETP SPECIFICATION: PRESSURE RING For ETP PUMP. MODEL:CPC 125/260 MOC:AISI 410
    Nos
    1
    67
    		 581080236Y SHAFT SLEEVE FOR ETP SPECIFICATION: SHAFT SLEEVE For ETP PUMP. MODEL:CPC 125/260 MOC:AISI 410
    Nos
    2
    Disclaimer :
    We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
    Tell us about your Product / Services,
    We will Find Tenders for you
    Cnet Technologies

    We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.

    About Us

    Services

    Browse Tenders

    For Sales Inquiry

    Connect With Us

    Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

    For Tender Information Services Visit : TenderDetail