Remaining Work Of Trh Tapovan District Chamoli
Tender Value
1.01 Crore
Estimated cost
Bid Submission
02 Jul 2020
0 days left
EMD
2.03 Lakhs
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chamoli → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Remaining Work Of Trh Tapovan District Chamoli
BOQ
| Name of Work:remaining work of TRH tapovan district chamoli | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL WORK | BI01010001010000000000000515BI0100001112 | ||
| 2 | 2 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001113 | 42.04 | Cum |
| 3 | 3 | Finishing 12 mm cement plaster of mix with 1:6 (1 cement : 6 fine sand) | BI01010001010000000000000515BI0100001114 | 2043.2 | Sqm |
| 4 | 4 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001115 | 536 | Sqm |
| 5 | 5 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001116 | 1503.57 | Sqm |
| 6 | 6 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer | BI01010001010000000000000515BI0100001117 | 1503.57 | Sqm |
| 7 | 7 | Finishing walls with Premium Acrylic Smooth Exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). | BI01010001010000000000000515BI0100001118 | 466 | Sqm |
| 8 | 8 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 60x60 cm | BI01010001010000000000000515BI0100001119 | 546.23 | Sqm |
| 9 | 9 | Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with Makrana white second quality. | BI01010001010000000000000515BI0100001120 | 12 | Sqm |
| 10 | 10 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any colour and shade - Area of slab upto 0.50 Sqm | BI01010001010000000000000515BI0100001121 | 8.5 | Sqm |
| 11 | 11 | Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001122 | 59.1 | Sqm |
| 12 | 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001123 | 254.19 | Sqm |
| 13 | 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | BI01010001010000000000000515BI0100001124 | 142.5 | Cum |
| 14 | 14 | Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile B | BI01010001010000000000000515BI0100001125 | 223.65 | Rmtr |
| 15 | 15 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. - 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | BI01010001010000000000000515BI0100001126 | 74.73 | Sqm |
| 16 | 16 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic ) 250 x 16 mm. | BI01010001010000000000000515BI0100001127 | 54 | Nos |
| 17 | 17 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating) 250 x 10 mm. | BI01010001010000000000000515BI0100001128 | 27 | Nos |
| 18 | 18 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating) 150 x 10 mm. | BI01010001010000000000000515BI0100001129 | 27 | Nos |
| 19 | 19 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) 125 mm. | BI01010001010000000000000515BI0100001130 | 27 | Nos |
| 20 | 20 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) 100 mm. | BI01010001010000000000000515BI0100001131 | 27 | Nos |
| 21 | 21 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised(Twin rubber stopper) | BI01010001010000000000000515BI0100001132 | 27 | Nos |
| 22 | 22 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). | BI01010001010000000000000515BI0100001133 | 24 | Nos |
| 23 | 23 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. | BI01010001010000000000000515BI0100001134 | 15 | Nos |
| 24 | 24 | Providing and fixing aluminium work for doors, windows, ventilators and partitions for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powder coating 50 microne) | BI01010001010000000000000515BI0100001135 | 1217.7 | kg |
| 25 | 25 | Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory with 12mm mild steel U beading | 1 | 116 | Sqm |
| 26 | 26 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions\nof Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness sqm | BI01010001010000000000000515BI01000011372 | 5.04 | Sqm |
| 27 | 27 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions\nof Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.00 mm thickness sqm | BI01010001010000000000000515BI01000011384 | 116.61 | Sqm |
| 28 | 28 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more co ats on new work | BI01010001010000000000000515BI01000011396 | 459 | Sqm |
| 29 | 29 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required.: In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | BI01010001010000000000000515BI01000011397 | 2400 | Kg |
| 30 | 30 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured. | BI01010001010000000000000515BI01000011398 | 545.94 | Sqm |
| 31 | 31 | Earth work in excavation by mechanical means (HydraulicExcavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or10 sqm on plan)including dressing of sides and ramming of bottoms, lift upto 1.5m, including gettingout the excavated soil and disposal of surplus excavated soil asdirected, within a leadof 50 m. | BI01010001010000000000000515BI01000011399 | 134 | Cum |
| 32 | 32 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI01000011400 | 5 | Cum |
| 33 | 33 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI01000011401 | 8.95 | Cum |
| 34 | 34 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI01000011402 | 43.65 | Cum |
| 35 | 35 | Centring and shuttering including strutting,ropping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. | BI01010001010000000000000515BI01000011403 | 20 | Sqm |
| 36 | 36 | Centring and shuttering including strutting,ropping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers | BI01010001010000000000000515BI01000011404 | 115.6 | Sqm |
| 37 | 37 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete | BI01010001010000000000000515BI01000011405 | 86.4 | Sqm |
| 38 | 38 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Shelves (Cast in situ) | BI01010001010000000000000515BI01000011406 | 171.37 | Sqm |
| 39 | 39 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Mild steel and Medium Tensile steel bars.- Thermo-Mechanically Treated bars. | BI01010001010000000000000515BI01000011407 | 67.73 | Qtl |
| 40 | 40 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI01000011408 | 17 | Cum |
| 41 | 41 | Providing and fixing G.I. Chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts bolts and washers as required complete as per the direction of Engineer Incharge- Made of G.I. wire of dia 4mm. PVC coated to achieve outer dia. not less than 5mm in required colour and shade | BI01010001010000000000000515BI01000011409 | 75 | Sqm |
| 42 | 42 | Pointing on stone work with cement mortar 1:3 (1 cement: 3fine sand) - Raised & Cut pointing | BI01010001010000000000000515BI01000011410 | 274 | Sqm |
| 43 | 43 | Excavation in soil in Hilly Area by mechanical means Without useinng Dozer including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1 | BI01010001010000000000000515BI01000011411 | 485 | Cum |
| 44 | 44 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc including supply of all materials, labour, t& p & royality etc required for proper completition of work in mud mortar | BI01010001010000000000000515BI01000011412 | 155 | Cum |
| 45 | 45 | SANITARY WORKS | BI01010001010000000000000515BI01000011413 | ||
| 46 | 46 | Providing and fixing white vitreous china pedestal type water closet (European type) W.C. pan with ISI marked white solid plastic seat and lid. | BI01010001010000000000000515BI01000011414 | 15 | Nos |
| 47 | 47 | Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. | BI01010001010000000000000515BI01000011415 | 9 | Nos |
| 48 | 48 | Providing and fixing toilet paper holder : C.P. Brass | BI01010001010000000000000515BI01000011416 | 15 | Nos |
| 49 | 49 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | BI01010001010000000000000515BI01000011417 | 15 | Nos |
| 50 | 50 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm - White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. | BI01010001010000000000000515BI01000011418 | 2 | Nos |
| 51 | 51 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 - White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass each pillar taps. | BI01010001010000000000000515BI01000011419 | 16 | Nos |
| 52 | 52 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of Nos. Approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI01000011420 | 16 | Nos |
| 53 | 53 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden - 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. | BI01010001010000000000000515BI01000011421 | 16 | Nos |
| 54 | 54 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth Nos. 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. | BI01010001010000000000000515BI01000011422 | 32 | Nos |
| 55 | 55 | Providing and fixing trap of self cleansing design with screwed down or hinged- 100 mm inlet and 100 mm outlet - Sand cast iron S&S as per IS: 3989. | BI01010001010000000000000515BI01000011423 | 40 | Nos |
| 56 | 56 | Providing and fixing PTMT grating of approved quality and colour.- Circular type.- 100 mm nominal dia. | BI01010001010000000000000515BI01000011424 | 40 | Nos |
| 57 | 57 | Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | BI01010001010000000000000515BI01000011425 | 14 | Nos |
| 58 | 58 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore | BI01010001010000000000000515BI01000011426 | 16 | Nos |
| 59 | 59 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. - 15mm nominal bore | BI01010001010000000000000515BI01000011427 | 8 | Nos |
| 60 | 60 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore | BI01010001010000000000000515BI01000011428 | 92 | Nos |
| 61 | 61 | Providing and fixing uplasticised PVC connection pipe with brass unions - 45 cm length 15 mm nominal bore | BI01010001010000000000000515BI01000011429 | 92 | Nos |
| 62 | 62 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not Nos. less than 40gms. | BI01010001010000000000000515BI01000011430 | 14 | Nos |
| 63 | 63 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 - Kitchen sink without drain board - 610x510 mm bowl depth 200 mm. | BI01010001010000000000000515BI01000011431 | 2 | Nos |
| 64 | 64 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. IINTERNAL work - Exposed on wall-15 mm dia. nominal bore | BI01010001010000000000000515BI01000011432 | 221 | Rmtr |
| 65 | 65 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. IINTERNAL work - Exposed on wall- 20 mm dia. nominal bore | BI01010001010000000000000515BI01000011433 | 44 | Rmtr |
| 66 | 66 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) - 20 mm dia. nominal bore | BI01010001010000000000000515BI01000011434 | 200 | Rmtr |
| 67 | 67 | Providing and placing on terrace (at all floor levels) polyethylene water storage litre tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank | BI01010001010000000000000515BI01000011435 | 4000 | lt. |
| 68 | 68 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes - 75 mm diameter | BI01010001010000000000000515BI01000011436 | 150 | Rmtr |
| 69 | 69 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes - 110 mm diameter | BI01010001010000000000000515BI01000011437 | 179 | Rmtr |
| 70 | 70 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories -Coupler- 75 mm | BI01010001010000000000000515BI01000011438 | 32 | Nos |
| 71 | 71 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories -Coupler- 110 mm | BI01010001010000000000000515BI01000011439 | 16 | Nos |
| 72 | 72 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories -Single tee with door - 75x75x75 mm | BI01010001010000000000000515BI01000011440 | 8 | Nos |
| 73 | 73 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories -Single tee with door - 110x110x110 mm | BI01010001010000000000000515BI01000011441 | 8 | Nos |
| 74 | 74 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories -Single tee without door - 75x75x75 mm | BI01010001010000000000000515BI01000011442 | 8 | Nos |
| 75 | 75 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories -Single tee without door - 110x110x110 mm | BI01010001010000000000000515BI01000011443 | 8 | Nos |
| 76 | 76 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories -Bend 87.5° - 75 mm | BI01010001010000000000000515BI01000011444 | 30 | Nos |
| 77 | 77 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories -Bend 87.5° - 110 mm | BI01010001010000000000000515BI01000011445 | 30 | Nos |
| 78 | 78 | Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks | BI01010001010000000000000515BI01000011446 | 15 | Nos |
| 79 | 79 | Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size ) necessary excavation7foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks | BI01010001010000000000000515BI01000011447 | 15 | Nos |
| 80 | 80 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey With F.P.S. Bricks | BI01010001010000000000000515BI01000011448 | 1 | Nos |
| 81 | 81 | S/F of C.P. wall mixer (Jaquar continental/ kohler/equivalent/as per direction by E/I) complete in all respect or as per direction of E/I. | BI01010001010000000000000515BI01000011449 | 14 | Nos |
| 82 | 82 | S/F of C.P. basin mixer (Jaquar continental/ kohler /equivalent/as per direction by E/I) complete in all respect or as per direction of E/I. | BI01010001010000000000000515BI01000011450 | 16 | Nos |
| 83 | 83 | Providing and fixing Hand shower, 15 mm nominal bore,(Jaquar / kohler/ equivalent/as per direction by E/I) complete in all respect or as per direction of E/I. | BI01010001010000000000000515BI01000011451 | 8 | Nos |
| 84 | 84 | Construction of wooden almirah size 120cm x 220cm with hangers, shelves, magnetic catchers, handles & other fittings including polishing etc. complete in all respect or as per direction of E/I. | BI01010001010000000000000515BI01000011452 | 14 | Nos |
AI Tender Summary
Tender Timeline
Jun 10, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJul 02, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 02, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender