Renovation And Upgradation Of Swimming Pool , Malda, English Bazar, Malda-West Bengal

TDR : 24521593

Tender Notice
BOQ

Expired

English Bazar, Malda , West Bengal

Tender Brief : Renovation And Upgradation Of Swimming Pool , Malda

Document Fees
₹ 3000 /-

EMD
₹ 74710.0 /-

Tender Value
₹ 37.35 Lakhs /-

Submission Date
22-06-2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: Renovation & Upgradation of Swimming Pool, Malda
1	1	REPAIR AND RENOVATION OF LADIES BATHROOM WITH TOILET AT D.S.A. SWIMMING POOL: Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75 m as directed.	BI01010001010000000000000515BI0100001113	40.65	m²
2	2	Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (Ground floor). [ Excluding cost of chipping over concrete surface ], (ii) With 1:4 cement mortar(a) 20 mm thick plaster		33.22	m²
3	3	(c) 10 mm thick plaster		4.95	m²
4	4	Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On plastered surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white)		24	m²
5	5	Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).		19	m²
6	6	Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.\n(B) Wall: With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white		39.12	m²
7	7	Labour for dismantling G.I. pipe with fittings. (i) 15 mm+(iii) 25 mm		20	m
8	8	Renewing C.I. clamp for pipe including cutting hole in wall etc. (i) 15 mm		20	Nos.
9	9	(iii) 25 mm		25	Nos.
10	10	Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (B) For Concealed Work. (a) 15 mm dia. medium quality		6	m
11	11	(c) 25 mm dia. medium quality		20	m
12	12	(b) Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).		6	Nos.
13	13	Supplying, fitting and fixing bib cock or stop cock.\n(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).		3	Nos.
14	14	Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.(a) For Exposed Work, (i) CPVC Pipes Class-1, SDR-11,\nfor toilet. (Dia) 15 mm		2.4	m
15	15	25 mm		3.74	m
16	16	Supplying, fitting and fixing Stainless steel Wall Mounted Hinged hand rail (750X100 mm) covered by Nylon surface with contour finish (for better grip) with two brackets. For toilet. 750 mm long.\n(Model Code No.B2210108 of CERA or equivalent.)		2	Nos.
17	17	Supplying, fitting & fixing Aluminium domical grating. (i) 150 mm		4	Nos.
18	18	Supplying, fitting and fixing soap holder.\n(a) PTMT (Prayag or equivalent)		8	Nos.
19	19	Supplying Fitting and Fixing Polymer Concrete Drainage Channel:\nClear Width 100 mm\nTotal Width 150 mm\nTotal Height 150 mm to 300 mm\nTotal Length 1000 mm\n?High quality polymer concrete with integrated side ribs for perfect anchoring in the concrete bed ?Perfectly frost resistant, ?Wear-free and almost mantenance free ?Modular leightweight construction ?Large choice of gratings ?Capillary-free for fast water drainage and dirt removal. Inside Drainage.		10	Nos.
20	20	Supply of G.I. nipple standard 50 mm long.(i) 15 mm		5	Nos.
21	21	(iii) 25 mm		3	Nos.
22	22	Supply of G.I. union.(i) 15 mm		5	Nos.
23	23	(iii) 25 mm		3	Nos.
24	24	Labour for dismantling G.I. pipe with fittings.		10	m
25	25	REPAIR AND RENOVATION OF LADIES CHANGEROOM [BACK OF LADIES BATHROOM] AT D.S.A. SWIMMING POOL: Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Anodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composite door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).(B) 15 Micron colour annodizing. j) Fixed partitions. (Unsupported length of vertical member more than 1.5 mtr.or both ends of vertical member restrained but panels more than 0.9 sq.m.). i) Top , bottom & side member.		47	m
26	26	ii) Intermediate member.		27.6	m
27	27	iii) Glazing clip.		31.84	m
28	28	In front for outside of Ladies Changeroom.		27.1	m
29	29	ii) Intermediate member.		4.4	m
30	30	iii) Glazing clip.		60	m
31	31	(B) 15 Micron colour annodizing. k) Movable door shutter.i) Door frame. (Top, bottom & sides).		38.3	m
32	32	Top rail.		5.4	m
33	33	Bottom rail.		5.4	m
34	34	Lock rail		5.4	m
35	35	Door vertical.		15.4	m
36	36	Glazing cleap.		24.8	m
37	37	i) Door frame. (Top, bottom & sides).		15.32	m
38	38	Top rail.		2.16	m
39	39	Bottom rail.		2.16	m
40	40	Lock rail		2.16	m
41	41	Door vertical.		6.16	m
42	42	Glazing cleap.		9.92	m
43	43	Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).		11.57	m²
44	44	Supplying stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White). (a) 250 mm long		8	Nos.
45	45	Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge.(a) 200 mm long		7	Nos.
46	46	Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections, (D) Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size, drilling and aligning fitted with inbuilt locking arrangement cutting the glass / board (pre-laminated / particle / block) to requisite shape and size moulding the edges fitted and fixed glazing clips and dry set neoprene / EPDM gasket, along with all other necessary arrangements for fixing the partition to walls, floors, beams, columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing and specifications and direction of the Engineer in charge. The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, fastener but excluding the cost of extruded aluminium sections, EPDM gasket, glass, board, glazing clips, locking arrangement, etc. I) For partitions using section of size: b) 101.50mm x 44.45 mm		21.31	m²
47	47	(A) Supplying Aluminium casted body hydraulic door closer as per I.S.I.		7	Nos.
48	48	Supplying, fitting and fixing towel rail with two brackets.\n(iii) 25 mm dia. and 750 mm long, (a) C.P. over brass		10	Nos.
49	49	Supplying, fitting and fixing soap holder.\n(a) PTMT (Prayag or equivalent)		10	Nos.
50	50	(b) Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).		10	Nos.
51	51	Dismantling carefully terraced floor only (including floor finish if any) or lime terracing in ground floor roof and removing rubbish as directed within a lead of 75 m.		0.05	Nos.
52	52	Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.		2.26	m²
53	53	Cutting holes and subsequent mending good damages. (a) Diameter upto 150 mm. (i) In brick work [Cement-4.0 Kg/Mtr]		4	m
54	54	REPAIR AND RENOVATION OF GENTS CHANGEROOM WITH TOILET\nStripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75 m as directed.		153.46	m²
55	55	Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Anodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composite door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).(B) 15 Micron colour annodizing. k) Movable door shutter.i) Door frame. (Top, bottom & sides).		9.9	m
56	56	ii) Shutter : Top rail.		1.35	m
57	57	Bottom rail.		1.35	m
58	58	Lock rail.		1.35	m
59	59	Door vertical.		8.16	m
60	60	Glazing cleap.		12.68	m
61	61	Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).		2.63	m²
62	62	Supplying stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White). (a) 250 mm long		4	Nos.
63	63	Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge.(a) 200 mm long		4	Nos.
64	64	Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections: (D) Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size, drilling and aligning fitted with inbuilt locking arrangement cutting the glass / board (pre-laminated / particle / block) to requisite shape and size moulding the edges fitted and fixed glazing clips and dry set neoprene / EPDM gasket, along with all other necessary arrangements for fixing the partition to walls, floors, beams, columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing and specifications and direction of the Engineer in charge. The rate includes the hire charge of all tools and plants, adhesive, joineries such as screw, fastener but excluding the cost of extruded aluminium sections, EPDM gasket, glass, board, glazing clips, locking arrangement, etc. I) For partitions using section of size:b) 101.50mm x 44.45 mm		3.15	m²
65	65	Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (Ground floor). [ Excluding cost of chipping over concrete surface ], (ii) With 1:4 cement mortar. (a) 20 mm thick plaster. Inside Wall		55.24	m²
66	66	(c) 10 mm thick plaster		24.75	m²
67	67	(b) 15 mm thick plaster		73.47	m²
68	68	Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On plastered surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white)		153.46	m²
69	69	Reparing collapsible gate by cutting out all rivets as necessary reassambling all members including welding pieces of channels, sraightening bent bars and rivetting with new rivets and fitting in position and painting two coats.		6.51	m²
70	70	Easing and oiling, cleaning collapsible gate and repairing to locking arrangements		6.51	m²
71	71	Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.\n(b) With 'S' trap (with vent)		2	Nos.
72	72	Supplying, fitting and fixing bib cock or stop cock.\n(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).		2	Nos.
73	73	Supplying, fitting and fixing towel rail with two brackets.\n(iii) 25 mm dia. and 750 mm long, (a) C.P. over brass		2	Nos.
74	74	Supplying, fitting and fixing soap holder.\n(a) PTMT (Prayag or equivalent)		2	Nos.
75	75	Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe		2	Nos.
76	76	Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C.(ii) Plastic (hallow type) white.		2	Nos.
77	77	Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm		2	Nos.
78	78	Supplying, fitting and fixing C.I. round grating.(ii) 150 mm.		4	Nos.
79	79	Supplying, fitting and fixing with cement jointing (3:1) with jute gasket soaked in cement mortar. (a) Stoneware bend. (i) 300 mm		4	m
80	80	Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/ 2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (a) With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth. (i) 150 mm dia. (internal).		8	Nos.
81	81	Labour for dismantling G.I. pipe with fittings. (i) 15 mm + (iii) 25 mm		23	m
82	82	Labour for fitting and fixing G.I. specials including cost of jointing materials. (b) Socket, Reducing socket, Bend, Plain equal elbow, Reducing elbow, Nipple, Short piece. (i) Upto 25 mm dia.		20	Units
83	83	Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (B) For Concealed Work. (a) 15 mm dia. medium quality		12	m
84	84	(c) 25 mm dia. medium quality		25	m
85	85	Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(iii) 600 mm long.		4	Nos.
86	86	Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (iv) 1050 mm long.		3	Nos.
87	87	Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. (b) 1000 litre capacity		2	Nos.
88	88	Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.(a) Upto 1st story from G.L.		2	Nos.
89	89	Labour for punching hole in plastic water storage tank upto 50 mm dia.		4	Nos.
90	90	Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).a) In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength > 1200 N		39.02	m²
91	91	Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.\n(B) Wall: With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white		24.66	m²
92	92	Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor). b) In Ground Floor: Sizes-300 mm x300mm x10 mm with breaking strength >1200 N.		1555.4	m²
93	93	Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.\n(A) Floor: With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m. (i) Coloured decorative.		346.56	m²
94	94	M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labor required for the work including all incidental charges such as electricity charges, labor insurance charges etc.II) For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg/ m [Ref : Building Works, Item 1,ii, Page 99]		0.62	mt
95	95	Supplying Fitting and Fixing Polymer Concrete Drainage Channel: Clear Width 100 mm Total Width 150 mm Total Height 150 mm to 300 mm Total Length 1000 mm ?High quality polymer concrete with integrated side ribs for perfect anchoring in the concrete bed ?Perfectly frost resistant, ?Wear-free and almost mantenance free ?Modular leightweight construction ?Large choice of gratings ?Capillary-free for fast water drainage and dirt removal. Inside Drainage.		26	Nos.
96	96	CONSTRUCTION OF SHED AT DSA SWIMMING POOL: \nEarth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm		11.66	m³
97	97	Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level filling joints with powdered earth or local sand.		48.64	m²
98	98	Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety] (a) 1:3:6 proportion		0.65	m³
99	99	Ordinary Cement Concrete ( Mix 3:1.5:1) with graded stone Chips (20 mm size) excluding shuttering & reinforcement, if any, in Ground floor as per IS 456-2000. Using Stone material of RAJMAHAL variety.[Ref : Building Works, Item 7 (iii), Page 14]		10.37	m³
100	100	M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labor required for the work including all incidental charges such as electricity charges, labor insurance charges etc.II) For Structural Works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg/ m [Ref : Building Works, Item 1,ii, Page 99]		7.43	mt
101	101	Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. meter (followed by color coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapezoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self-tapping screw, EPDM Washer 16 mm dia & 3 mm th. Washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:- a) With 0.5 mm thick sheet.[Ref : Building Works, Item 14,i,a, Page 83]		49.02	m²
102	102	Painting with best quality synthetic enamel paint of approved make and brand smoothening surface by sand papering etc. i.e., …….. Using of approved puttty etc. 2 coat on wooden surface with other than hi-gloss of quality in ground floor. Metal surface (2 coat) in ground floor		12.9	m²
103	103	REPAIRING OF SHED AT SWIMMING POOL OF DSA: Taking out carefully G.C.I. or C.I. or as bestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed.		122.76	m²
104	104	Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.		279.71	m²
105	105	Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) In ground floor including roof.		106.56	m²
106	106	Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge		8.258	m³
107	107	Dismantling carefully wood work in posts, postplates, rafters, partition etc., sorting and stacking serviciable materials at site and removing rubbish as directed.		2.13	m³
108	108	M.S. or W. I. ornamental grill of approved design joints continuously welded with M.S., W.I. flats and bars for windows,railing etc fitted & fixed with necessary screws and lugs. i ) Grill weighing above 16 Kg./sq.mtr and above		232.64	kg
109	109	Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.		106.56	m²
110	110	Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (Ground floor). [ Excluding cost of chipping over concrete surface ], (ii) With 1:4 cement mortar(a) 20 mm thick plaster		279.71	m²
111	111	Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On plastered surface : With other than hi-gloss of approved quality- (iv) Two coats (with any shade except white)		279.71	m²
112	112	Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. Both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardware’s as per direction of Engineer-in-Charge. In ground floor.		1.49	m²
113	113	Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (B) For Concealed Work.(a) 15 mm dia. medium quality		3	m
114	114	(c) 25 mm dia. medium quality		20	m
115	115	(b) Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model - Florentine of Jaquar or similar brand).		1	Nos.
116	116	Supplying, fitting and fixing bib cock or stop cock.\n(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).		2	Nos.
117	117	Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap (with vent)		1	Nos.
118	118	Supplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Model Code No. S1060106 of CERA or equivalent.)		1	Nos.
119	119	Supplying, fitting and fixing Stainless steel Wall Mounted Hinged hand rail (750X100 mm) covered by Nylon surface with contour finish (for better grip) with two brackets. For toilet. 750 mm long.\n(Model Code No.B2210108 of CERA or equivalent.)		1	Nos.
120	120	Supplying, fitting and fixing soap holder.\n(a) PTMT (Prayag or equivalent)		1	Nos.
121	121	Supply of G.I. nipple standard 50 mm long.(i) 15 mm		3	m
122	122	(iii) 25 mm		2	m
123	123	Labour for dismantling G.I. pipe with fittings.		22	m
124	124	Supply of G.I. union.(i) 15 mm		3	Nos.
125	125	(iii) 25 mm		2	Nos.
126	126	Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. meter (followed by color coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapezoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self-tapping screw, EPDM Washer 16 mm dia & 3 mm th. Washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:- a) With 0.5 mm thick sheet.[Ref : Building Works, Item 14,i,a, Page 83]		122.76	m²
127	127	Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping) (A) 300 mm lapping each way(c) With 0.80 mm sheet		18.6	m
128	128	Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430/1510 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut nslots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 4 mm thick High Pressure Steam Cured Non Asbestos pearl designer Fibre Cement Standard Ceiling Board (Density > 1500 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type A Category IV of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. In ground floor. a) False Ceiling (with 4mm thick Pearl Designer Fibre Cement Board and E-Grid\nT-2430/1510).		106.5	m²
129	129	Sub Total
130	130	GST 12%		1	Nos.
131	131	CESS 1%		1	Nos.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

West Bengal Tenders

Construction Tenders

Sports Infrastruture Tenders

Swimming Pool Construction Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Renovation And Upgradation Of Swimming Pool , Malda, English Bazar, Malda-West Bengal

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Renovation And Upgradation Of Swimming Pool , Malda, English Bazar, Malda-West Bengal

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us