Civil And Sse Work At Cheyyur As Per Nit
Tender Value
31200
Estimated cost
Bid Submission
22 Jun 2020
0 days left
EMD
31200
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
cheyyur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Civil And Sse Work At Cheyyur As Per Nit
BOQ
| Name of Work: Civil work:- Providing structre plinths for WC, AB switch, support, strung bus structure, Breaker, CT, LAS, cable duct fire protection wall etc., enhancement of existig 110/11 KV power transformer capacity from 1x10 MVA into 2x10 MVA at CHEYYUR 110/33-11 KV SS.SSE Work:- Supply & fabrication of lattice structure, MS Channels, MS Angle & Supply of MS flats & Ms Rod & erection of structure, earthmat & earth raisers, erection of 110 KV and 11 KV switches, providing droppers, jumpers, laying of cables & end termination and supply of station auxilaries & etc., for Enhancement of 110/11 KV power transforemer capacity from 1x10 MVA into 2x10 MVA at Cheyyur 110/33-11 KV SS. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | CIVIL:- Earth work excavation in hard stiff clay, stiff black cotton, hard red earth, shales, murram gravel, stoney earth and earth mixed with small size boulders, hard gravelly soil and depositing on bank with initial lead of 10m and lift of 2m etc. | 115 | M3 | |
| 2 | 2 | CIVIL:- Earth work excavation soil and depositing on bank with initial lead of 10m and lift of 2m in Soft Disintegrated Rock not requiring blasting including cost of all materials lead lift etc complete | 15 | M3 | |
| 3 | 3 | CIVIL:- Earth work excavation soil and depositing on bank with initial lead of 10m and lift of 2m in Medium rock dense medium rock not requiring blasting including cost of all materials lead lift etc complete as directed by the department engineer at site. | 7 | M3 | |
| 4 | 4 | CIVIL:- Removing Hard rock by wedging, chiseling and trimming to proper shap where blasting is prohibited, including the cost of all materials lead lift etc complete as directed by the department engineer at site. | 7 | M3 | |
| 5 | 5 | CIVIL:- Providing and laying Sand filling for foundation including cost of labour, transport, consolidation, lead and lift etc., complete as per standerd specification and as directed by the department at site. | 12 | M3 | |
| 6 | 6 | CIVIL:- Plain Cement Concrete 1:3:6 using 40 mm HBG stone for foundation including cost of all materials, labour, transport, curing, lead, lift etc. complete as per standard specification and as directed by the dept. Engineer at site . | 12 | M3 | |
| 7 | 7 | CIVIL:- R:C:C 1:1.5:3 using 12 to 20mm HBG metal including cost of all materials, transport, lead, Lift, labour, for laying concrete curing etc., complete as directed by the department engineer at site. Without form work | 17 | M3 | |
| 8 | 8 | CIVIL:- R.C.C. 1:1.5:3 using 12- 20mm metal for foundation for Fire protection wall coloumn below GL with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site. | 35 | M3 | |
| 9 | 9 | CIVIL:- Providing and laying P:C:C 1:2:4 using 20mm HBG metal for plinths without form work including cost of all materials,curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site | 74 | M3 | |
| 10 | 10 | CIVIL:- Providing and laying P.C.C 1:2:4 using 20mm HBG stone for Transformer Plinth with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site. | 26 | M3 | |
| 11 | 11 | CIVIL:- Plastering in CM 1:3 12 mm thick including cost of all materials, transport, curing, labour, lead, lift etc. complete.as per standard specification and as directed by the dept. Engineer at site . | 307 | M2 | |
| 12 | 12 | CIVIL:- Providing steel reinforcement for all RCC works including cost of all materilas steel, binding wire, labour, lead, lift, cutting, bending, typing and binding and placing in position etc., complete as directed by the department engineer at site. | 3.12 | Mt | |
| 13 | 13 | CIVIL:- Filling with well gravel including cost of all materials, transport, leads, lift, labour etc., complete as directed by the department engineer at site. | 4 | M3 | |
| 14 | 14 | CIVIL:- Filling with quarry dust including cost of all materials, transport, leads, lift, labour etc., complete as directed by the department engineer at site. | 4 | M3 | |
| 15 | 15 | CIVIL:- Filling with 10-12 mm chips including cost of all labour, materials, transport, leads, lift,etc., complete and as directed by the department engineer at site. | 4 | M3 | |
| 16 | 16 | CIVIL:- Supplying and fixing MS angles 50 x 50 x 6mm and 35x35x6mm MS angle for cable duct including the cost of cutting to required length, fixing in position and all materials, transport, labour, lead, lift, etc.,complete and as directed by the department engineer at site. | 272 | Kgs | |
| 17 | 17 | CIVIL:- Brick work in C M 1:5 using good quality secound class chamber burnt bricks for basement including cost of all materials labour, lead & lift etc., complete as directed by the department engineer at site. | 1 | M3 | |
| 18 | 18 | CIVIL:- Colour washing two coats using shell lime over one coat of white washing including cost of all materials, labour, lead lift etc., complete as per standard specification and as directed by the department engineer at site. | 308 | M² | |
| 19 | 19 | CIVIL:- Labour charges for assembling of template in correct position and aligenment for various equipment plinth and grouting the foundation bolts including cost of all materials transport, labour, lead, lift etc., complete as directed by the dept. Engineer at site. | 37 | Nos | |
| 20 | 20 | CIVIL:- Supplying and fixing GI bolt and nuts with minimum 100mm long bend and thread 2 nos of GI nuts and washer including all materials, labour,lead,lift etc., complete as directed by the department engineer at site. 20mm dia, 2.10 m length | 168 | Nos | |
| 21 | 21 | CIVIL:- Supplying and fixing GI bolt and nuts with minimum 100mm long bend and thread 2 nos of GI nuts and washer including all materials, labour,lead,lift etc., complete as directed by the department engineer at site. 25mm dia, 2.10 m length | 48 | Nos | |
| 22 | 22 | CIVIL:- Supplying and providing 90 lbs rails and labour charges for fixing in correct position and aligenment as directed by dept.Engineer at site including cost of Rail ,cutting charges , transport to site, labour, lead, lift etc. Complete as directed by the department engineer at site. | 400 | Kgs | |
| 23 | 23 | CIVIL:- Supplying, laying of PVC pipe with required PVC bend L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department engineer at site. 40mm dia | 20 | RM | |
| 24 | 24 | CIVIL:- Supplying, laying of PVC pipe with required PVC bend L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department engineer at site. 32 mm dia | 25 | RM | |
| 25 | 25 | CIVIL:- Supplying, laying of PVC pipe with required PVC bend L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department engineer at site. 25 mm dia | 25 | RM | |
| 26 | 26 | CIVIL:- Supplying & fixing gunmetal wheel valve including cost of materials, labour, lead & lift etc., complete as directed by the department engineer at site. 32mm dia | 2 | Nos | |
| 27 | 27 | CIVIL:- Supplying & fixing gunmetal wheel valve including cost of materials, labour, lead & lift etc., complete as directed by the department engineer at site. 25mm dia | 3 | Nos | |
| 28 | 28 | CIVIL:- Labour charges for refilling with excavated earth other than sand including cost of labour, transport, consolidation, lead and lift etc., complete as directed by the department engineer at site. | 53 | M3 | |
| 29 | 29 | CIVIL:- Supplying Fabrication and erection hot galvanizing of latice type structure confirming to IS 2629-1985 including the cost of all materials, transport, galvanizing charges,labour, lead lift etc complete as per standerd specification and as directed by the department engineer at site. | 5 | MT | |
| 30 | 30 | CIVIL:- Labour charges for dismantling of existing RCC concrete plints by drilling holes and breaking with compressor drilling machine in restricted area and the same clearing away from the site including all materials, T & P, transport, labour, lead and lift etc., complete as directed by the department engineer at site. | 18 | M3 | |
| 31 | 31 | SSE:- Supply,fabrication, sand blasting with zinc painting (125 x 65 /100x50) and MS angle, MS Channels various size including the cost of all materials, transport,labour,lead, lift etc., complete as directed by the dept.engineer at site. | 4.8 | MT | |
| 32 | 32 | SSE:- Supply of MS flat for earthmat 65x10mm thick 50x8mm for earth raiser to site including the cost of all materials, transport, labour,lead, lift etc., complete as directed by the dept.engineer at site | 2.3 | MT | |
| 33 | 33 | SSE:- Supply and fabrication of earth electrode 6.00mtr. Length. With 40mm MS Rod including transport and other charges and erection of earth spikes, including cost of MS Rod 40mm, transport,labour,lead, lift etc., complete as directed by the dept.engineer at site. | 1 | MT | |
| 34 | 34 | SSE:- Labour charges for erection of structure including the cost of all labour, lead, lift etc., complete as directed by the dept.engineer at site. Light section structure. (Sectional weight below 14kg/m) | 5.5 | MT | |
| 35 | 35 | SSE:- Labour charges for erection of breaker using with crane arrangement and connecting link rod, supplied by board SF6 gas filling and other consumable as directed by the dept.engineer at site. SF6 Circuit Breaker 110 KV | 1 | Nos | |
| 36 | 36 | SSE:- Labour charges for erection of breaker using with crane arrangement and connecting link rod, supplied by board SF6 gas filling and other consumable as directed by the dept.engineer at site. VCB/SF6 CB 11 or 22 or 33 KV | 1 | Nos | |
| 37 | 37 | SSE:- Labour charges for erection of auxilaries equipment or using own crane arrangement, including providing holes wherever required, fixing junction box and other consumable as directed by the dept.engineer at site 110 KV CT,PT,NCT reactor (one single Phase unit) | 3 | Nos | |
| 38 | 38 | SSE:- Labour charges for erection of CT,PT,NCT. Reactor, auto recloser (1 phase or 3phase unit) including providing holes wherever required, labour,transport,lead,lift etc., complete as per standard specification and as directed by the dept.engineer at site. For 33 or 22 or 11 KV (using mannual labour or crane by own arrangement) | 3 | Nos | |
| 39 | 39 | SSE:- Labour charges for erection of CT/PT junction box including fabrication of clamp, labour, transport, lead, lift etc., complete as per standard specification and as directed by the dept.engineer at site. | 1 | Nos | |
| 40 | 40 | SSE:- Labour for erection and alignment of AB Switches including cost of lubricant, consumable and wiring (if necessary), checking of operation by both manual and electrical (if necessary) including the cost of all labour, transport, lead, lift etc., complete as per standard specification and as directed by the dept.engineer at site. 110 KV without earth hand operated. (Under Normal condition) | 2 | Nos | |
| 41 | 41 | SSE:- Labour for erection and alignment of AB Switches including cost of lubricant, consumable and wiring (if necessary), checking of operation by both manual and electrical (if necessary) including the cost of all labour, transport, lead, lift etc., complete as per standard specification and as directed by the dept.engineer at site. 110 KV without earth hand operated. (Under LC Condition) | 2 | Nos | |
| 42 | 42 | SSE:- Labour for erection and alignment of AB Switches including cost of lubricant, consumable and wiring (if necessary), checking of operation by both manual and electrical (if necessary) including the cost of all labour, transport, lead, lift etc., complete as per standard specification and as directed by the dept.engineer at site. 3333 or 22 or 11 KV without earth hand operated. (Under LC Condition) | 1 | Nos | |
| 43 | 43 | SSE:- Labour for erection of LAS including fabrication of base if required and all labour, lead, lift etc., complete as directed by the dept.engineer at site.110 KV Station type. (Under LC Condition) | 6 | Nos | |
| 44 | 44 | SSE:- Labour charges for erection of LAS including fabrication of base if required and all labour, lead, lift etc., complete as directed by the dept.engineer at site. 33 or 22 or 11 KV Station type. (Under LC Condition) | 3 | Nos | |
| 45 | 45 | SSE:- Labour for erection of single pole stack upright under hang or suspension including the cost of labour,transport,lead, lift etc., complete as per standard specification and as directed by the dept.engineer at site. 110 KV (Under Normal Condition) | 6 | Nos | |
| 46 | 46 | SSE:- Labour for erection of single pole stack upright under hang or suspension including the cost of labour,transport,lead, lift etc., complete as per standard specification and as directed by the dept.engineer at site. 110 KV (Under LC Condition) | 3 | Nos | |
| 47 | 47 | SSE:- Labour charges for erectiion of strung bus including hoisting of insulators including the cost of all labour, lead,lift etc., complete as directed by the dept. engineer at site.110 KV Single zebra conductor (1 span 3 runs). (Under LC Condition) | 1 | Span | |
| 48 | 48 | SSE:- Labour charges for erectiion of strung bus including hoisting of insulators including the cost of all labour, lead,lift etc., complete as directed by the dept. engineer at site.33/22/11 KV Single zebra conductor (1 span 3 runs). (Under LC Condition) | 1 | Span | |
| 49 | 49 | SSE:- Labour for erection of bus bar including fabrication and any modification of end clamp wherever necessary and the cost of all labour,lead,lift etc., complete as directed by the dept. engineer at site. 75 mm IPS AL tube with making bends. (Under Normal Condition) | 3 | Nos. | |
| 50 | 50 | SSE:- Labour for erection of bus bar including fabrication and any modification of end clamp wherever necessary and the cost of all labour,lead,lift etc., complete as directed by the dept. engineer at site. 75mm IPS AL tube without making bends. (Under Normal Condition) | 3 | Nos. | |
| 51 | 51 | SSE:- Labour for erection of bus bar including fabrication and any modification of end clamp wherever necessary and the cost of all labour,lead,lift etc., complete as directed by the dept. engineer at site. 75 mm IPS AL tube with making bends. (Under LC Condition) | 6 | Nos. | |
| 52 | 52 | SSE:- Labour for erection of bus bar including fabrication and any modification of end clamp wherever necessary and the cost of all labour,lead,lift etc., complete as directed by the dept. engineer at site. 50mm IPS AL tube without making bends. (Under LC Condition) | 3 | Nos. | |
| 53 | 53 | SSE:- Labour for providing jumpers and droppers including the cost of all labour,lead,lift etc., complete as directed by the dept. engineer at site. (Under Normal Condition) | 18 | Nos. | |
| 54 | 54 | SSE:- Labour for providing jumpers and droppers including the cost of all labour,lead,lift etc., complete as directed by the dept. engineer at site. (Under LC Condition) | 33 | Nos. | |
| 55 | 55 | SSE:- Labour, machineries, consumables for fabrication of earth electrode 10 mtr/6mtr length or as required length for yard including the cost of all labour,lead, lift etc., complete as directed by the dept.engineer at site. | 0.85 | MT | |
| 56 | 56 | SSE:- Labour, machineries, consumables for erection of earth spikes including the cost of all labour,lead,lift etc., complete as directed by the dept. engineer at site. | 4 | Nos. | |
| 57 | 57 | SSE:- Labour,machineries, consumables for erection of earthmat and earth raiser. including the cost of all labour,lead,lift etc., complete as directed by the dept. engineer at site. | 2.3 | MT | |
| 58 | 58 | SSE:- Providing 140/150mm dia bore including mobilization in all type of soil and erection of earth electrode, supply and providing of A4 Grade bentonite powder with 5% common salt mixed with available site clay soil 5kg per meter depth in earth bore including cost of all labour, lead, lift etc., complete as directed by the field engineer at site. | 84 | RM | |
| 59 | 59 | SSE:- Labour for erection of panel/battery charger simplex indoor/outdoor including the cost of all labour,lead,lift etc., complete and as directed by the dept. engineer at site. | 3 | Nos. | |
| 60 | 60 | SSE:- Labour for laying of cable in duct /Trench including the cost of aluminium tag for identification including the cost of all labour, lead, lift, etc., complete as directed by the department engineer at site. Upto 8 Core | 0.6 | KM | |
| 61 | 61 | SSE:- Labour for laying of cable in duct /Trench including the cost of aluminium tag for identification including the cost of all labour, lead, lift, etc., complete as directed by the department engineer at site. Above 8 Core | 2 | KM | |
| 62 | 62 | SSE:- Labour for laying of cable and clamping in structure including the cost of all labour, lead, lift, etc., complete as directed by the department engineer at site. Upto 8 Core | 0.1 | KM | |
| 63 | 63 | SSE:- Labour for excavation and refilling of trench of average width of 0.3m and average depth of 0.8M for earth mat and 0.4m for laying of cable below fixed yard level and of any size as required by field engineer. | 60 | M3 | |
| 64 | 64 | SSE:- Supply and erection of yard light pole including laying of cable inside pole and including the cost of all labour,lead,lift etc., complete as directed by the dept. engineer at site. | 5 | Nos | |
| 65 | 65 | SSE:- supply of LED lamp 72W Fitting with fixture and fuse box including wiring and testing and burning condition, including the cost of 15A 2 Way strip connector and other consumables including the cost of all labour,lead,lift etc., complete as directed by the dept. engineer at site. | 5 | Nos | |
| 66 | 66 | SSE:- Labour for loading or unloading or shifting of materials etc., including the cost of all labour, lead, lift etc., complete as directed by the dept. engineer at site. Non - fragile | 10 | MT | |
| 67 | 67 | SSE:- Labour for loading or unloading or shifting of materials etc., including the cost of all labour, lead, lift etc., complete as directed by the dept. engineer at site. fragile | 10 | MT | |
| 68 | 68 | SSE:- Labour charges for painting earth raisers by green enamel paint (Dulex, Asian Berger Preferred) wherever required including removal of dust, rust using wire brush and painting brush etc., including the cost of all labour,lead,lift etc., complete as directed by the dept. engineer at site | 200 | RM | |
| 69 | 69 | SSE:- Hire charges for crane provided (12 Tone) for erection loading, unloading or shifting of equipments as directed by the dept.engineer at site. | 12 | Hour | |
| 70 | 70 | SSE:- Manufacturing and supply of bolt of required length out of 18 - 20mm dia GI round including the cost of GI round and 2 Nos.GI Nuts as directed by the field engineer including the cost of all transport,abour,lead,lift etc., complete as directed by the dept. engineer at site. Eye bolt & Grout bolt. | 12 | Kgs | |
| 71 | 71 | SSE:- Supply and provision of M8, M9, M10, M12 and M16 full thread GI Bolts and nuts of various sizes for erection of AB Switches and insulator or any other purpose wherever required and as directed by field engineer. | 500 | Kgs | |
| 72 | 72 | SSE:- Fabrication, supply and fixing of main equipment board size of 2500x1500Hmm out of 10 SWG (3.25mm) MS Sheet and 45x45x3 MS angles as per drawing and as directed by the field engineer including the cost of all materials. | 120 | Kgs | |
| 73 | 73 | SSE:- Manufacturing and supply of fire bucket of 10 lit. Capacity made out of 26SWG (0.46MM) M.S.Sheet painted with white and red enamel paint in side and out side respectively bottom of bucket shall be 'U' Shapped out side of the bucket shall be written as FIRE in English/Tamil in white enamel paint including the cost of materials and as directed by the field engineer at site. | 4 | Nos. | |
| 74 | 74 | SSE:- Fabrication, supply and fitting of CT/PT junction box thickness of 14 SWG (2.00mm) MS Sheet where ever required as directed by field engineer. The box shall be vermin proof, shall have sturdy hinges provision for mounting terminals blocks and locking arrangements including cost of all materials. 400W X 150 D X 300H. | 1 | Nos. | |
| 75 | 75 | SSE:- Manufacturing and supply of yard light box size of 200W X 175H X 150D mm thickness of 18 SWG (1.2MM) MS Sheet with cable entry holes, fixing arrangement for fuse units and mounting clamp as directed by the field engineer including the cost of all transport, labour, lead, lift etc., complete as directed by the dept. engineer at site. | 5 | Nos | |
| 76 | 76 | SSE:- Labour charges for removing rust primer coat first and second coat painting both sides and MS boards RS joist & yard light pole etc., including cost of enamel paint (dulex, Asian Berger preferred) and other consumables as directed by the field Engineer. | 5 | M2 | |
| 77 | 77 | SSE:- Labour charges for writing details in finished surface boards including cost of enamel paint (dulex, Asian Berger preferred) and other consumables as directed by the field engineer. | 5 | M2 | |
| 78 | 78 | SSE:- Supply and erection of 'B' class GI Pipe for extension of tandem / down pipe for AB switches including cost of GI Pipe and for any other works as required and as directed by the dept.engineer at site. GI Pipe 40 mm dia | 5 | mtr. | |
| 79 | 79 | SSE:- Supply and fixing of ISI mark backlite HRC rewireable fuse with holder in panels/boxes for AC /DC/PT circuit wherever required as directed by the field engineer. 16 Amps. | 10 | Each | |
| 80 | 80 | SSE:- Supply and fixing of ISI mark HRC fuse without holder reputed make in panels/boxes for AC /DC/PT circuits wherever required as directed by the field engineer. 2/5/10 Amps. | 10 | Each | |
| 81 | 81 | SSE:- Supply and fixing of mounting channels/rails, suitable for CBTM5 terminal block in panel/box and as required and directed by field engineer. | 1 | mtr. | |
| 82 | 82 | SSE:- Supply and fixing of nut type CBTM5 or equivalent terminal block in panel box as required and as directed by the field engineer. | 30 | mtr. | |
| 83 | 83 | SSE:- Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer. 19 MM | 10 | Nos | |
| 84 | 84 | SSE:- Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer. 25 MM | 30 | Nos | |
| 85 | 85 | SSE:- Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field engineer. 28 MM | 6 | Nos | |
| 86 | 86 | SSE:- Supply and termination of cable core end including cost of cable socket (Lugs), ferrules straps etc as per cable schedule and as directed by the field engineer. | 200 | Nos | |
| 87 | 87 | SSE:- Supply and fixing of (Godrej 6 lever Navotal lock with triplicate keys for AB Switches and for any other purpose including the cost of ring and key token as directed by the field engineer. | 4 | Nos | |
| 88 | 88 | SSE:- Supply and providing of 600mm mean dia,300mm height, 36mm thick cement collar for identification of earth electrode location including 1 primer and 2 coats of colour wash as directed by field engineer. | 14 | Nos | |
| 89 | 89 | SSE:- Manufacturing and supply of sand drums made out if oil drum of size 580 mm dia and 420 mm height with with conical cover made out of in sheet provided with handle including cost of barrel sand and consumables as directed by field engineer. | 2 | Nos. | |
| 90 | 90 | SSE:- Supply and fixing of MCBs in Panels/Boxes of reputed makes directed by the field engineer. Single Pole16 Amps | 1 | Nos | |
| 91 | 91 | SSE:- Supply and fixing of flexible copper tape/rope for interlinking panel earthing and for any other purpose, on any sizes etc., as directed by the field engineer. | 1 | Kgs | |
| 92 | 92 | SSE:- Fabrication and fixing of bell mouth providing jumper connection in the solid core/PT insulators including the cost of GI pipe 50 mm dia one meter & other consumables and as directed by the field engineer. | 3 | Nos | |
| 93 | 93 | SSE:- Supply and erection of fire extinguisher including the cost of labour, transport, lead, lift etc., complete as per standard specification and as directed by the dept.engineer at site. DCP type 50 Liter | 1 | Nos | |
| 94 | 94 | SSE:- Supply and erection of fire extinguisher including the cost of labour, transport, lead, lift etc., complete as per standard specification and as directed by the dept.engineer at site.DCP type 25 KG . | 1 | Nos | |
| 95 | 95 | SSE:- Supply and erection of fire extinguisher including the cost of labour, transport, lead, lift etc., complete as per standard specification and as directed by the dept.engineer at site.DCP type 10 KG . | 2 | Nos | |
| 96 | 96 | SSE:- Supply and erection of fire extinguisher including the cost of labour, transport, lead, lift etc., complete as per standard specification and as directed by the dept.engineer at site. DCP type 9 Liter . | 2 | Nos | |
| 97 | 97 | SSE:- Supply and erection of fire extinguisher including the cost of labour, transport, lead, lift etc., complete as per standard specification and as directed by the dept.engineer at site.DCP type 5 KG . | 2 | Nos | |
| 98 | 98 | SSE:- Labour for Dismantling jumpers and droppers including the cost of all labour,lead,lift etc., complete as directed by the dept. engineer at site. (Under LC Condition) | 15 | Nos | |
| 99 | 99 | SSE:- Labour for dismantling of AB Switches including cost of lubricant, consumable and wiring (if necessary), checking of operation by both manual and electrical (if necessary) including the cost of all labour, transport, lead, lift etc., complete as per standard specification and as directed by the dept.engineer at site. 110 KV without earth hand operated. (Under Normal Condition) for re erection at new location. | 1 | Nos | |
| 100 | 100 | SSE:- Dismantling of LAS including Monitoring, dropper & earth connection for reerection at new location by the dept.engineer at site.110 KV Station type. (Under LC Condition) | 3 | Nos | |
| 101 | 101 | SSE:- Dismantling of 75mm Alu.Bus bar for re erection (Under LC condition) | 3 | Nos | |
| 102 | 102 | SSE:- Dismantling of under hand 110 KV insulator from 110 KV strung bus tower & 110 KV support insulator (Under LC condition) | 6 | Nos | |
| 103 | 103 | SSE:- Dimantling of light section structure of 110 KV AB switch structure ( for re erection) and 110 KV LAS structure. | 0.7 | MT | |
| 104 | 104 | SSE:- Dimantling of heavy section structure of 110 KV AB switch structure of 110 KV LAS structure. | 0.3 | MT | |
| 105 | 105 | GST for bidders within TamilNadu | |||
| 106 | 105.01 | SGST | item81 | 1 | percentage |
| 107 | 105.02 | CGST | item82 | 1 | percentage |
| 108 | 106 | GST for bidders outside TamilNadu (IGST) | item83 | 1 | percentage |
AI Tender Summary
Tender Timeline
Jun 06, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJun 22, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 23, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender