Housing Urban and Rular Development Government Departments Closing in 0 days TDR #24510214

Repair And Renovation Work Of Govt . Iti Barabanki

Issued by Government Departments · Barabanki, Uttar Pradesh
Tender Value
30.77 Lakhs
Estimated cost
Bid Submission
10 Jun 2020
0 days left
EMD
15400
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Barabanki → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Repair And Renovation Work Of Govt . Iti Barabanki , Welder Workshop Dismantling Cement Concrete Or Brick Or Granolithic Floors & Including Stacking Of Dismantled Material As Directed By Engineer In Charge With In A Distance Of 60 Meters , Cement Concrete Flooring 1 : 2 : 4 ( 1 Cement : 2 Coarse Sand :4 Graded Stone Aggregate 12 - 20 Mm Nominal Size ) Laid In One Layer Neat Cement ( 40 Mm Thick Floor ) . , 2 Cm Thick Cement Plaster In Dado Or Skirting In 1:2 Consisting Of One Part Of Cement & Two Parts Of Approved Coarse Sand Laid In Panels Finished With 3Mm Floating Coat Of Neat Cement Or Cement Mixed With Matble Dust In Ratio Of 5:1 Including Supply Of All Materials Alabour T & P Etc . Required For Proper Completion Of The Work . , Dismantling Of Existing Plaster Including Disposal Of Refuse As Directed By The Engineer In Charge , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm , Of Approved Brand And Manufacturer , Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete . , One Priming Coat & Two Coat Oil Distemper On New Work Including Supply Of All Material Labour And T & P Etc Required For Proper Completion Of The Work ( Pwd 649+650 ) , Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade : New Work ( Two Or More Coats Applied @ 1 . 43 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2 . 20 Kg / 10 Sqm ) . , Dismantling Of Door Or Windows Leaves Including Stacking Of Materials As Directed By The Engineer In Charge With In Adistance Of 60 Meters , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Non-Decorative Type , Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters:35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing & Fixing Glass Panes With Putty And Glazing Clips In Steel Doors , Windows , Clerestory Windows , All Complete With 4 . 0 Mm Thick Glass Panes , Providing & Fixing Stainless Steel Sliding Door Bolts Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Nuts And Screws Etc Complete . ( A ) 250Mm X 16Mm . , Providing And Fixing Stainless Steel Towerbolts ( Barrel Type ) With Necessary Screws Etc . Complete , Providing And Fixing Stainless Steel Handles With Screws Etc . Complete ( A ) 150 Mm , Painting Ist Coat Over Priming Coat ( But Excluding Cost Of Priming Coat ) On Steel And Other Metal Surfaces Up To 10 Cm . Width Or Girth Or Small Articles Not Exceeding 0 . 10 Sqm In Area White Superior Synthetic Enamel Such As Luxol - 3 , Hi - Gloss Apcolite Superlac , Dulex Specified Brushing To Give An Even Shade And Including Cleaning The Surface Of All Dirt , Dust And Other Foreign Matter Sand Papering And Stoping Including Cost Of All Materials , Labour Tools And Plants Etc . Required For Proper Completion Of The Work . , Mild Steel Or Iron Work Of Small Sizes And Sections Such As Holding Down Bolts , Hold Fast Tierods , Gratings Etc . ( When Not Included In An Over All Rates ) Wrought To Required From Including Supply Of Steel And Its Wastage Including Cost Of Bolts , Nuts If Required For And Welding , Grinding And Making Holes As Required Completion Of Work Fabrication Of Holes Doors , Chaukhats Nosing . Fabrication Of Grill / Stair Case Railing . , Fabrication Of Z - Section Steel Windows . , 12Mm Thick Plaster With Cement Mortar In Proportion Of 1:6 Cement & Coarse Sand Of 1 . 5 F . M , Electrical Works Wiring Points For Light With 1 . 5 Sqmm . Fr Pvc Insulated Multistrand Single Core Copper Condutor Cable In Pvc Conduit Pipe Partly Concealed In Wall And Partly Laid In Slab Along With The Reinforcement Before Concreting , Complete With 1 . 5 Sqmm . Fr Pvc Insulated Multistrand Copper Conductor Cable As Earth Continuity Wire And Piano Type Switch Etc . Complete In All Respects . , Same As Item No . ( 1 ) But For Fan And Light Duty Exhaust Fan . , Same As Item No . ( 1 ) But For 5 Amp Plug Point With Piano Type Switch And Socket Etc . , Supply And Wiring Of Submain 2 Number 4 Sqmm . Fr Pvc Insulated 1100 V Grade Multistranded Single Core Copper Conductor Cable In Heavy Duty 20Mm Dia Pvc Conduit Partly Concealed In Wall And Partly Laid In Slab Along With One Number 2 . 5 Sqmm Fr Pvc Insulated Multistranded Copper Conductor Cable As Earth Contunity Wire Etc . Complete In All Respects . , Erection And Testing Of Ceiling Fan And Regulator For Room Height Upto 35Mts . Including Supply Of 3Mm Thick G . I . Down Rod 19Mm Dia Dully Painted , Complete In All Respects . , S / F Of Hexagonal Fan Box With Hexagonal Side Of Approx . 80Mm In Length Fabricated From 16 Swg M . S . Sheet Incorporating With 10Mm . Dia . M . S . Round Bar Duly Bent For Supporting Fan Hanger Duly Painted With Red Oxide And Screwing Arrangement With Wiring Conduit Laid In The R . C . C . Roof Before Concreting Along With Supply Of All Materials , Labour , T & P Etc . For Proper Completion Of Work . , Supply And Wiring Of 4 Number 6 Sqmm . Pvc Insulated 1100 V Grade Single Core Aluminium Conductor Cable In 32Mm Dia Heavy Duty ( 2Mm Thick ) Pvc Conduit Partly Concealed In Wall And Partly Laid In Slab Along With Two Number 4 Sq . Mm . Fr Pvc Insulated Multistrand Copper Conductor Cable As Earth Contunity Wire Etc . Complete In All Respects . , Supply And Burying Of 600Mm X 600 Mmx6mm G . I . Plate , Vertically For Earthing With Its Top Atleast 3 Mts . Below Ground Level Complete With 20Mm G . I . Pipe And Funnel For Watering And Two Earthing Leads Of No . 8 To 10 Swg G . I . Wire In 15Mm Dia G . I . Pipe Upto Switch Board ( From Apron To Switch Board The Cost Of G . I . Pipe And Copper Wire Will Be Extra ) 30Cm . Square C . I . Frame With Hinged Cover , Masonary Housing , Alternate Layers / Of Charcoal / Coke And Salt At Least 150Mm Thick Alround Etc . Complete In , Supply And Fixing Of Flush / Surface Mounting Distribution Boards Complete In All Respects . B ) 6 Way Tpn , Supply And Fixing Of 6 Amp To 32 Amp 4 Pole Mcb ( 10Ka ) C Curve A ) 25 Amps . 4P Mcb , S / F 63 Amp . 415 V Metal Clad Tpn Hrc Type Switch Fuse Unit Complete With Hrc Fuse , On Angle Iron Frame Complete In All Respects . , Supply And Fixing Following Rating Four Pole , 415 Volts Isolator In The Existing Mcb Db Complete With Connections , As Required . A ) 63 Amps . , S / F Of Single Light Wall Bracket On Matching M . D . F . E . G . . Board Base Etc . Complete In All Respects . , Supply And Fixing Of Recess / Surface / Pendent Mounting Round / Square12 To 15 Watt Led Down Lighter Having Powder Coated Die Cast Aluminium Housing With Heat Sink , Diffuser / Reflector And Driver Set Complete In All Respect . [ Aaa ] [ Crompton Or Philips ] , S / F / T / C Of Led Tube Light With Batten Suitable For Up To 1X22watt Led Tube Light Fitting Including Tube On Surface Complete In All Respect [ Aaa ] , Supply And Erection Of Ac 1200Mm Sweep , 230 / 250 Volts , 50 Hz Ceilling Fan With Regulater Standar Down Rod , Blades Including Connection Etc . Complete As Required ( Crompton Greaves / Gec / Orient / Bajaj ) , Fitter Workshop Dismantling Cement Concrete Or Brick Or Granolithic Floors & Including Stacking Of Dismantled Material As Directed By Engineer In Charge With In A Distance Of 60 Meters , Cement Concrete Flooring 1 : 2 : 4 ( 1 Cement : 2 Coarse Sand :4 Graded Stone Aggregate 12 - 20 Mm Nominal Size ) Laid In One Layer Neat Cement ( 40 Mm Thick Floor ) . , 2 Cm Thick Cement Plaster In Dado Or Skirting In 1:2 Consisting Of One Part Of Cement & Two Parts Of Approved Coarse Sand Laid In Panels Finished W

BOQ

Name of Work: Repairing & Renovation of ITI Barabanki U.P.
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11WELDER WORKSHOP\nDismantling cement concrete or brick or granolithic floors & including stacking of dismantled material as directed by Engineer in charge with in a distance of 60 metersBI01010001010000000000000515BI0100001113125.79sqm
22Cement concrete flooring 1 : 2 : 4 ( 1 Cement : 2 Coarse Sand :4 graded Stone aggregate 12 - 20 mm nominal size ) laid in one layer neat Cement (40 mm thick floor).BI01010001010000000000000515BI0100001114119.16sqm
332 cm thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand laid in panels finished with 3mm floating coat of neat cement or cement mixed with matble dust in ratio of 5:1 including supply of all materials alabour T & P etc. required for proper completion of the work.BI01010001010000000000000515BI01000011156.63sqm
44Dismantling of existing plaster including disposal of refuse as directed by the engineer in chargeBI01010001010000000000000515BI0100001116456.52SQM
55Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.BI01010001010000000000000515BI0100001117456.52SQM
66One priming coat & two coat oil distemper on new work including supply of all material labour and T & P etc required for proper completion of the work (PWD 649+650)BI01010001010000000000000515BI0100001118172.74SQM
77Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).BI01010001010000000000000515BI0100001119283.79SQM
88Dismantling of door or windows leaves including stacking of materials as directed by the Engineer in charge with in adistance of 60 metersBI01010001010000000000000515BI010000112022.46SQM
99Providing and fixing ISI marked flush door shutters conforming to IS :\n2202 (Part I) non-decorative type, core of block board construction with\nframe of 1st class hard wood and well matched commercial 3 ply\nveneering with vertical grains or cross bands and face veneers on both\nfaces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges\nwith necessary screwsBI01010001010000000000000515BI01000011213.15SQM
1010Providing & fixing glass panes with putty and glazing clips in steel doors,\nwindows, clerestory windows, all complete with 4.0 mm thick glass panesBI01010001010000000000000515BI010000112219.99SQM
1111Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .BI01010001010000000000000515BI01000011231NOS
1212Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. completeBI01010001010000000000000515BI01000011242NOS
1313Providing and fixing stainless steel handles with screws etc. complete (a) 150 mmBI01010001010000000000000515BI01000011252NOS
1414Painting Ist coat over priming coat ( but excluding cost of priming coat ) on Steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10 sqm in area white superior synthetic enamel such as Luxol - 3, Hi - Gloss Apcolite Superlac, Dulex specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.BI01010001010000000000000515BI0100001126170.45SQM
1515Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. ( when not included in an over all rates ) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Fabrication of grill / stair case railing.BI01010001010000000000000515BI0100001127359.64KG
1616Fabrication of Z - section steel windows.BI01010001010000000000000515BI0100001128399.6KG
171712mm thick plaster with cement mortar in proportion of 1:6 cement & coarse sand of 1.5 F.MBI01010001010000000000000515BI010000112988456.52SQM
1818ELECTRICAL WORKS\nWiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.BI01010001010000000000000515BI010000113010PT
1919Same as item No.(1) but for fan and light duty exhaust fan.BI01010001010000000000000515BI01000011316PT
2020Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc.BI01010001010000000000000515BI010000113216PT
2121Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.BI01010001010000000000000515BI0100001133110Rm.
2222Erection and testing of ceiling fan and regulator for room height upto 35mts. including supply of 3mm thick G.I. down rod 19mm dia dully painted, complete in all respects.BI01010001010000000000000515BI01000011346Each
2323S/F of hexagonal fan box with hexagonal side of approx. 80mm in length fabricated from 16 SWG M.S. sheet incorporating with 10mm. dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour, T & P etc. for proper completion of work.BI01010001010000000000000515BI01000011356Nos.
2424Supply and wiring of 4 number 6 sqmm .PVC insulated 1100 V grade single core aluminium conductor cable in 32mm dia heavy duty (2mm thick) PVC conduit partly concealed in wall and partly laid in slab along with two number 4 sq.mm. FR PVC insulated multistrand copper conductor cable as earth contunity wire etc. complete in all respects.BI01010001010000000000000515BI0100001136130M
2525Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8 to 10 SWG G.I. wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete inBI01010001010000000000000515BI01000011371Nos.
2626Supply and fixing of flush/surface mounting distribution boards complete in all respects. b) 6 Way TPNBI01010001010000000000000515BI01000011381Nos.
2727Supply and fixing of 6 Amp to 32 Amp 4 Pole MCB(10KA)C Curve a) 25 Amps. 4P MCBBI01010001010000000000000515BI01000011391Nos.
2828S/F 63 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse, on angle iron frame complete in all respects.BI01010001010000000000000515BI01000011401Nos.
2929Supply and fixing following rating four pole, 415 volts isolator in the existing MCB DB complete with connections, as required. a) 63 Amps.BI01010001010000000000000515BI01000011411Nos.
3030S/F of single light wall bracket on matching M.D.F.E.G..board base etc. complete in all respects.BI01010001010000000000000515BI01000011428Nos.
3131Supply and fixing of recess/Surface/Pendent mounting round/square12 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.[AAA] [ Crompton OR Philips ]BI01010001010000000000000515BI01000011432Nos.
3232S/F/T/C of LED tube light with batten suitable for up to 1x22watt LED tube light fitting including tube on surface complete in all respect[AAA]BI01010001010000000000000515BI010000114410Nos.
3333Supply and erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required (Crompton Greaves/GEC/ORIENT/BAJAJ)BI01010001010000000000000515BI01000011456Nos.
3434FITTER WORKSHOP\nDismantling cement concrete or brick or granolithic floors & including stacking of dismantled material as directed by Engineer in charge with in a distance of 60 metersBI01010001010000000000000515BI0100001146132.75sqm
3535Cement concrete flooring 1 : 2 : 4 ( 1 Cement : 2 Coarse Sand :4 graded Stone aggregate 12 - 20 mm nominal size ) laid in one layer neat Cement (40 mm thick floor).BI01010001010000000000000515BI0100001147126sqm
36362 cm thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand laid in panels finished with 3mm floating coat of neat cement or cement mixed with matble dust in ratio of 5:1 including supply of all materials alabour T & P etc. required for proper completion of the work.BI01010001010000000000000515BI01000011486.75sqm
3737Dismantling of existing plaster including disposal of refuse as directed by the engineer in chargeBI01010001010000000000000515BI0100001149513.14SQM
3838Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.BI01010001010000000000000515BI0100001150513.14SQM
3939One priming coat & two coat oil distemper on new work including supply of all material labour and T & P etc required for proper completion of the work (PWD 649+650)BI01010001010000000000000515BI0100001151247.41SQM
4040Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).BI01010001010000000000000515BI0100001152265.73SQM
4141Dismantling of door or windows leaves including stacking of materials as directed by the Engineer in charge with in adistance of 60 metersBI01010001010000000000000515BI010000115318.18SQM
4242Providing and fixing ISI marked flush door shutters conforming to IS :\n2202 (Part I) non-decorative type, core of block board construction with\nframe of 1st class hard wood and well matched commercial 3 ply\nveneering with vertical grains or cross bands and face veneers on both\nfaces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges\nwith necessary screwsBI01010001010000000000000515BI01000011546.3SQM
4343Providing & fixing glass panes with putty and glazing clips in steel doors,\nwindows, clerestory windows, all complete with 4.0 mm thick glass panesBI01010001010000000000000515BI010000115513.23SQM
4444Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .BI01010001010000000000000515BI01000011562NOS
4545Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete (a) 250 mm x 10mmBI01010001010000000000000515BI01000011574NOS
4646Providing and fixing stainless steel handles with screws etc. complete (a) 150 mmBI01010001010000000000000515BI01000011584NOS
4747Painting Ist coat over priming coat ( but excluding cost of priming coat ) on Steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10 sqm in area white superior synthetic enamel such as Luxol - 3, Hi - Gloss Apcolite Superlac, Dulex specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.BI01010001010000000000000515BI0100001159151.83SQM
4848Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. ( when not included in an over all rates ) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Fabrication of grill / stair case railing.BI01010001010000000000000515BI0100001160238.14KG
4949Fabrication of Z - section steel windows.BI01010001010000000000000515BI0100001161264.6KG
505012mm thick plaster with cement mortar in proportion of 1:6 cement & coarse sand of 1.5 F.MBI01010001010000000000000515BI0100001162513.14SQM
5151ELECTRICAL WORKS\nWiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.BI01010001010000000000000515BI010000116310PT
5252Same as item No.(1) but for fan and light duty exhaust fan.BI01010001010000000000000515BI01000011646PT
5353Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc.BI01010001010000000000000515BI010000116516PT
5454Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.BI01010001010000000000000515BI0100001166125Rm.
5555Erection and testing of ceiling fan and regulator for room height upto 35mts. including supply of 3mm thick G.I. down rod 19mm dia dully painted, complete in all respects.BI01010001010000000000000515BI01000011676Each
5656S/F of hexagonal fan box with hexagonal side of approx. 80mm in length fabricated from 16 SWG M.S. sheet incorporating with 10mm. dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour, T & P etc. for proper completion of work.BI01010001010000000000000515BI01000011686Nos.
5757Supply and wiring of 4 number 6 sqmm .PVC insulated 1100 V grade single core aluminium conductor cable in 32mm dia heavy duty (2mm thick) PVC conduit partly concealed in wall and partly laid in slab along with two number 4 sq.mm. FR PVC insulated multistrand copper conductor cable as earth contunity wire etc. complete in all respects.BI01010001010000000000000515BI0100001169125M
5858Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8 to 10 SWG G.I. wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.BI01010001010000000000000515BI01000011701Nos.
5959Supply and fixing of flush/surface mounting distribution boards complete in all respects. b) 6 Way TPNBI01010001010000000000000515BI01000011711Nos.
6060Supply and fixing of 6 Amp to 32 Amp 4 Pole MCB(10KA)C Curve a) 25 Amps. 4P MCBBI01010001010000000000000515BI01000011721Nos.
6161S/F 63 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse, on angle iron frame complete in all respects.BI01010001010000000000000515BI01000011731Nos.
6262Supply and fixing following rating four pole, 415 volts isolator in the existing MCB DB complete with connections, as required. a) 63 Amps.BI01010001010000000000000515BI01000011741Nos.
6363S/F of single light wall bracket on matching M.D.F.E.G..board base etc. complete in all respects.BI01010001010000000000000515BI01000011758Nos.
6464Supply and fixing of recess/Surface/Pendent mounting round/square12 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.[AAA] [ Crompton OR Philips ]BI01010001010000000000000515BI01000011762Nos.
6565S/F/T/C of LED tube light with batten suitable for up to 1x22watt LED tube light fitting including tube on surface complete in all respect[AAA]BI01010001010000000000000515BI010000117710Nos.
6666Supply and erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required (Crompton Greaves/GEC/ORIENT/BAJAJ)BI01010001010000000000000515BI01000011786Nos.
6767FITTING & MACHINE\nDismantling cement concrete or brick or granolithic floors & including stacking of dismantled material as directed by Engineer in charge with in a distance of 60 metersBI01010001010000000000000515BI0100001179132.75sqm
6868Cement concrete flooring 1 : 2 : 4 ( 1 Cement : 2 Coarse Sand :4 graded Stone aggregate 12 - 20 mm nominal size ) laid in one layer neat Cement (40 mm thick floor).BI01010001010000000000000515BI0100001180126sqm
69692 cm thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand laid in panels finished with 3mm floating coat of neat cement or cement mixed with matble dust in ratio of 5:1 including supply of all materials alabour T & P etc. required for proper completion of the work.BI01010001010000000000000515BI01000011816.75sqm
7070Dismantling of existing plaster including disposal of refuse as directed by the engineer in chargeBI01010001010000000000000515BI0100001182513.14SQM
7171Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.BI01010001010000000000000515BI0100001183513.14SQM
7272One priming coat & two coat oil distemper on new work including supply of all material labour and T & P etc required for proper completion of the work (PWD 649+650)BI01010001010000000000000515BI0100001184247.41SQM
7373Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).BI01010001010000000000000515BI0100001185265.73SQM
7474Dismantling of door or windows leaves including stacking of materials as directed by the Engineer in charge with in adistance of 60 metersBI01010001010000000000000515BI010000118618.18SQM
7575Providing and fixing ISI marked flush door shutters conforming to IS :\n2202 (Part I) non-decorative type, core of block board construction with\nframe of 1st class hard wood and well matched commercial 3 ply\nveneering with vertical grains or cross bands and face veneers on both\nfaces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges\nwith necessary screwsBI01010001010000000000000515BI01000011876.3SQM
7676Providing & fixing glass panes with putty and glazing clips in steel doors,\nwindows, clerestory windows, all complete with 4.0 mm thick glass panesBI01010001010000000000000515BI010000118813.23SQM
7777Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .BI01010001010000000000000515BI01000011892NOS
7878Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete (a) 250 mm x 10mmBI01010001010000000000000515BI01000011904NOS
7979Providing and fixing stainless steel handles with screws etc. complete (a) 150 mmBI01010001010000000000000515BI01000011914NOS
8080Painting Ist coat over priming coat ( but excluding cost of priming coat ) on Steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10 sqm in area white superior synthetic enamel such as Luxol - 3, Hi - Gloss Apcolite Superlac, Dulex specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.BI01010001010000000000000515BI0100001192151.83SQM
8181Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. ( when not included in an over all rates ) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Fabrication of grill / stair case railing.BI01010001010000000000000515BI0100001193238.14KG
8282Fabrication of Z - section steel windows.BI01010001010000000000000515BI0100001194264.6KG
838312mm thick plaster with cement mortar in proportion of 1:6 cement & coarse sand of 1.5 F.MBI01010001010000000000000515BI0100001195513.14SQM
8484ELECTRICAL WORKS\nWiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.BI01010001010000000000000515BI010000119610PT
8585Same as item No.(1) but for fan and light duty exhaust fan.BI01010001010000000000000515BI01000011976PT
8686Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc.BI01010001010000000000000515BI010000119816PT
8787Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.BI01010001010000000000000515BI0100001199125Rm.
8888Erection and testing of ceiling fan and regulator for room height upto 35mts. including supply of 3mm thick G.I. down rod 19mm dia dully painted, complete in all respects.BI01010001010000000000000515BI01000012006Each
8989S/F of hexagonal fan box with hexagonal side of approx. 80mm in length fabricated from 16 SWG M.S. sheet incorporating with 10mm. dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour, T & P etc. for proper completion of work.BI01010001010000000000000515BI01000012016Nos.
9090Supply and wiring of 4 number 6 sqmm .PVC insulated 1100 V grade single core aluminium conductor cable in 32mm dia heavy duty (2mm thick) PVC conduit partly concealed in wall and partly laid in slab along with two number 4 sq.mm. FR PVC insulated multistrand copper conductor cable as earth contunity wire etc. complete in all respects.BI01010001010000000000000515BI0100001202125M
9191Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8 to 10 SWG G.I. wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.BI01010001010000000000000515BI01000012031Nos.
9292Supply and fixing of flush/surface mounting distribution boards complete in all respects. b) 6 Way TPNBI01010001010000000000000515BI01000012041Nos.
9393Supply and fixing of 6 Amp to 32 Amp 4 Pole MCB(10KA)C Curve a) 25 Amps. 4P MCBBI01010001010000000000000515BI01000012051Nos.
9494S/F 63 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse, on angle iron frame complete in all respects.BI01010001010000000000000515BI01000012061Nos.
9595Supply and fixing following rating four pole, 415 volts isolator in the existing MCB DB complete with connections, as required. a) 63 Amps.BI01010001010000000000000515BI01000012071Nos.
9696S/F of single light wall bracket on matching M.D.F.E.G..board base etc. complete in all respects.BI01010001010000000000000515BI01000012088Nos.
9797Supply and fixing of recess/Surface/Pendent mounting round/square12 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.[AAA] [ Crompton OR Philips ]BI01010001010000000000000515BI01000012092Nos.
9898S/F/T/C of LED tube light with batten suitable for up to 1x22watt LED tube light fitting including tube on surface complete in all respect[AAA]BI01010001010000000000000515BI010000121010Nos.
9999Supply and erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required (Crompton Greaves/GEC/ORIENT/BAJAJ)BI01010001010000000000000515BI01000012116Nos.
100100MACHINE MOTOR VEHCHILE WORKSHOP \nDismantling cement concrete or brick or granolithic floors & including stacking of dismantled material as directed by Engineer in charge with in a distance of 60 metersBI01010001010000000000000515BI0100001212304.5sqm
101101Cement concrete flooring 1 : 2 : 4 ( 1 Cement : 2 Coarse Sand :4 graded Stone aggregate 12 - 20 mm nominal size ) laid in one layer neat Cement (40 mm thick floor).BI01010001010000000000000515BI0100001213294sqm
1021022 cm thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand laid in panels finished with 3mm floating coat of neat cement or cement mixed with matble dust in ratio of 5:1 including supply of all materials alabour T & P etc. required for proper completion of the work.BI01010001010000000000000515BI010000121410.5sqm
103103Dismantling of existing plaster including disposal of refuse as directed by the engineer in chargeBI01010001010000000000000515BI0100001215765.46SQM
104104Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.BI01010001010000000000000515BI0100001216765.46SQM
105105One priming coat & two coat oil distemper on new work including supply of all material labour and T & P etc required for proper completion of the work (PWD 649+650)BI01010001010000000000000515BI0100001217373.1SQM
106106Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).BI01010001010000000000000515BI0100001218392.35SQM
107107Dismantling of door or windows leaves including stacking of materials as directed by the Engineer in charge with in adistance of 60 metersBI01010001010000000000000515BI010000121950.49SQM
108108Providing & fixing glass panes with putty and glazing clips in steel doors,\nwindows, clerestory windows, all complete with 4.0 mm thick glass panesBI01010001010000000000000515BI010000122050.49SQM
109109Painting Ist coat over priming coat ( but excluding cost of priming coat ) on Steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10 sqm in area white superior synthetic enamel such as Luxol - 3, Hi - Gloss Apcolite Superlac, Dulex specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.BI01010001010000000000000515BI0100001221359.79SQM
110110Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. ( when not included in an over all rates ) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Fabrication of grill / stair case railing.BI01010001010000000000000515BI0100001222908.82KG
111111Fabrication of Z - section steel windows.BI01010001010000000000000515BI01000012231009.8KG
11211212mm thick plaster with cement mortar in proportion of 1:6 cement & coarse sand of 1.5 F.MBI01010001010000000000000515BI0100001224765.46SQM
113113ELECTRICAL WORK\nWiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects.BI01010001010000000000000515BI010000122512PT
114114Same as item No.(1) but for fan and light duty exhaust fan.BI01010001010000000000000515BI010000122612PT
115115Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc.BI01010001010000000000000515BI010000122724PT
116116Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects.BI01010001010000000000000515BI0100001228250Rm.
117117Erection and testing of ceiling fan and regulator for room height upto 35mts. including supply of 3mm thick G.I. down rod 19mm dia dully painted, complete in all respects.BI01010001010000000000000515BI010000122912Each
118118S/F of hexagonal fan box with hexagonal side of approx. 80mm in length fabricated from 16 SWG M.S. sheet incorporating with 10mm. dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour, T & P etc. for proper completion of work.BI01010001010000000000000515BI010000123012Nos.
119119Supply and wiring of 4 number 6 sqmm .PVC insulated 1100 V grade single core aluminium conductor cable in 32mm dia heavy duty (2mm thick) PVC conduit partly concealed in wall and partly laid in slab along with two number 4 sq.mm. FR PVC insulated multistrand copper conductor cable as earth contunity wire etc. complete in all respects.BI01010001010000000000000515BI0100001231300M
120120Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8 to 10 SWG G.I. wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.BI01010001010000000000000515BI01000012321Nos.
121121Supply and fixing of flush/surface mounting distribution boards complete in all respects.BI01010001010000000000000515BI01000012331Nos.
122122Supply and fixing of 6 Amp to 32 Amp 4 Pole MCB(10KA)C CurveBI01010001010000000000000515BI01000012341Nos.
123123S/F 63 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse, on angle iron frame complete in all respects.BI01010001010000000000000515BI01000012351Nos.
124124Supply and fixing following rating four pole, 415 volts isolator in the existing MCB DB complete with connections, as required. a) 63 Amps.BI01010001010000000000000515BI01000012361Nos.
125125S/F of single light wall bracket on matching M.D.F.E.G..board base etc. complete in all respects.BI01010001010000000000000515BI010000123712Nos.
126126Supply and fixing of recess/Surface/Pendent mounting round/square12 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.[AAA] [ Crompton OR Philips ]BI01010001010000000000000515BI010000123812Nos.
127127S/F/T/C of LED tube light with batten suitable for up to 1x22watt LED tube light fitting including tube on surface complete in all respect[AAA]BI01010001010000000000000515BI010000123912Nos.
128128Supply and erection of AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with regulater standar down rod, blades including connection etc. complete as required (Crompton Greaves/GEC/ORIENT/BAJAJ)BI01010001010000000000000515BI010000124012Nos.
129129BOUNDRY WALL\nDismantling of existing plaster including disposal of refuse as directed by the engineer in charge pwd 706BI01010001010000000000000515BI0100001241342.843SQM
13013012mm thick plaster with cement mortar in proportion of 1:6 cement & coarse sand of 1.5 F.M pwd 586+(583-582)BI01010001010000000000000515BI0100001242342.843SQM
131131Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). pwd 13.47.1BI01010001010000000000000515BI0100001243342.843SQM
132132Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. pwd 13.80BI01010001010000000000000515BI0100001244342.843SQM
133133Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods, gratings etc. ( when not included in an over all rates ) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. pwd 502BI01010001010000000000000515BI0100001245825.471KG
134134Painting Ist coat over priming coat ( but excluding cost of priming coat ) on Steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10 sqm in area white superior synthetic enamel such as Luxol - 3, Hi - Gloss Apcolite Superlac, Dulex specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. pwd 641+642BI01010001010000000000000515BI010000124641.2SQM
135135INTERLOCKING TILES \nEARTHWORK IN EXCAVATION IN FOUNDATIONS (S.I.NO.251)BI01010001010000000000000515BI0100001247172.565CUM
136136P.C.C IN 1:4:8 IN CEMENT,COURSE SAND & 40MM STONE BALLAST IN FOUNDATIONS (S.I.NO.281)BI01010001010000000000000515BI010000124844.038CUM
137137CLASS M-150 B/W IN 1:4 CEMENT & COURSE SAND IN FOUNDATION (S.I.NO.307B)BI01010001010000000000000515BI010000124925.061CUM
138138SUPPLY & LAYING OF INTERLOCKING TILES OF THICKNESS 80MM INCLUDING LEVELLING & DRESSING OF SURFACE TO REQUIRED LEVEL & SLOPE (CH- ROAD WORK NEW ITEM 1)BI01010001010000000000000515BI0100001250349.58SQM
139139P.C.C IN 1:2:4 IN CEMENT,COURSE SAND & 20MM STONE BALLAST IN FOUNDATIONS (S.I.NO.279 B)BI01010001010000000000000515BI01000012512.611CUM
140140FILLING OF CARTED EARTHBI01010001010000000000000515BI0100001252132.114CUM

AI Tender Summary

OUR REF NO 24510214
AUTHORITY Government Departments
TENDER VALUE 30.77 Lakhs
LAST DATE 10-06-2020
Authority
Authority Name Uttar Pradesh Projects Corporation Limited
Work Description Repair And Renovation Work Of Govt . Iti Barabanki , Welder Workshop Dismantling Cement Concrete Or Brick Or Granolithic Floors & Including Stacking Of Dismantled Material As Directed By Engineer In Charge With In A Distance Of 60 Meters , Cement Concrete Flooring 1 : 2 : 4 ( 1 Cement : 2 Coarse Sand :4 Graded Stone Aggregate 12 - 20 Mm Nominal Size ) Laid In One Layer Neat Cement ( 40 Mm Thick Floor ) . , 2 Cm Thick Cement Plaster In Dado Or Skirting In 1:2 Consisting Of One Part Of Cement & Two Parts Of Approved Coarse Sand Laid In Panels Finished With 3Mm Floating Coat Of Neat Cement Or Cement Mixed With Matble Dust In Ratio Of 5:1 Including Supply Of All Materials Alabour T & P Etc . Required For Proper Completion Of The Work . , Dismantling Of Existing Plaster Including Disposal Of Refuse As Directed By The Engineer In Charge , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm , Of Approved Brand And Manufacturer , Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete . , One Priming Coat & Two Coat Oil Distemper On New Work Including Supply Of All Material Labour And T & P Etc Required For Proper Completion Of The Work ( Pwd 649+650 ) , Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade : New Work ( Two Or More Coats Applied @ 1 . 43 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2 . 20 Kg / 10 Sqm ) . , Dismantling Of Door Or Windows Leaves Including Stacking Of Materials As Directed By The Engineer In Charge With In Adistance Of 60 Meters , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Non-Decorative Type , Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters:35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing & Fixing Glass Panes With Putty And Glazing Clips In Steel Doors , Windows , Clerestory Windows , All Complete With 4 . 0 Mm Thick Glass Panes , Providing & Fixing Stainless Steel Sliding Door Bolts Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade With Nuts And Screws Etc Complete . ( A ) 250Mm X 16Mm . , Providing And Fixing Stainless Steel Towerbolts ( Barrel Type ) With Necessary Screws Etc . Complete , Providing And Fixing Stainless Steel Handles With Screws Etc . Complete ( A ) 150 Mm , Painting Ist Coat Over Priming Coat ( But Excluding Cost Of Priming Coat ) On Steel And Other Metal Surfaces Up To 10 Cm . Width Or Girth Or Small Articles Not Exceeding 0 . 10 Sqm In Area White Superior Synthetic Enamel Such As Luxol - 3 , Hi - Gloss Apcolite Superlac , Dulex Specified Brushing To Give An Even Shade And Including Cleaning The Surface Of All Dirt , Dust And Other Foreign Matter Sand Papering And Stoping Including Cost Of All Materials , Labour Tools And Plants Etc . Required For Proper Completion Of The Work . , Mild Steel Or Iron Work Of Small Sizes And Sections Such As Holding Down Bolts , Hold Fast Tierods , Gratings Etc . ( When Not Included In An Over All Rates ) Wrought To Required From Including Supply Of Steel And Its Wastage Including Cost Of Bolts , Nuts If Required For And Welding , Grinding And Making Holes As Required Completion Of Work Fabrication Of Holes Doors , Chaukhats Nosing . Fabrication Of Grill / Stair Case Railing . , Fabrication Of Z - Section Steel Windows . , 12Mm Thick Plaster With Cement Mortar In Proportion Of 1:6 Cement & Coarse Sand Of 1 . 5 F . M , Electrical Works Wiring Points For Light With 1 . 5 Sqmm . Fr Pvc Insulated Multistrand Single Core Copper Condutor Cable In Pvc Conduit Pipe Partly Concealed In Wall And Partly Laid In Slab Along With The Reinforcement Before Concreting , Complete With 1 . 5 Sqmm . Fr Pvc Insulated Multistrand Copper Conductor Cable As Earth Continuity Wire And Piano Type Switch Etc . Complete In All Respects . , Same As Item No . ( 1 ) But For Fan And Light Duty Exhaust Fan . , Same As Item No . ( 1 ) But For 5 Amp Plug Point With Piano Type Switch And Socket Etc . , Supply And Wiring Of Submain 2 Number 4 Sqmm . Fr Pvc Insulated 1100 V Grade Multistranded Single Core Copper Conductor Cable In Heavy Duty 20Mm Dia Pvc Conduit Partly Concealed In Wall And Partly Laid In Slab Along With One Number 2 . 5 Sqmm Fr Pvc Insulated Multistranded Copper Conductor Cable As Earth Contunity Wire Etc . Complete In All Respects . , Erection And Testing Of Ceiling Fan And Regulator For Room Height Upto 35Mts . Including Supply Of 3Mm Thick G . I . Down Rod 19Mm Dia Dully Painted , Complete In All Respects . , S / F Of Hexagonal Fan Box With Hexagonal Side Of Approx . 80Mm In Length Fabricated From 16 Swg M . S . Sheet Incorporating With 10Mm . Dia . M . S . Round Bar Duly Bent For Supporting Fan Hanger Duly Painted With Red Oxide And Screwing Arrangement With Wiring Conduit Laid In The R . C . C . Roof Before Concreting Along With Supply Of All Materials , Labour , T & P Etc . For Proper Completion Of Work . , Supply And Wiring Of 4 Number 6 Sqmm . Pvc Insulated 1100 V Grade Single Core Aluminium Conductor Cable In 32Mm Dia Heavy Duty ( 2Mm Thick ) Pvc Conduit Partly Concealed In Wall And Partly Laid In Slab Along With Two Number 4 Sq . Mm . Fr Pvc Insulated Multistrand Copper Conductor Cable As Earth Contunity Wire Etc . Complete In All Respects . , Supply And Burying Of 600Mm X 600 Mmx6mm G . I . Plate , Vertically For Earthing With Its Top Atleast 3 Mts . Below Ground Level Complete With 20Mm G . I . Pipe And Funnel For Watering And Two Earthing Leads Of No . 8 To 10 Swg G . I . Wire In 15Mm Dia G . I . Pipe Upto Switch Board ( From Apron To Switch Board The Cost Of G . I . Pipe And Copper Wire Will Be Extra ) 30Cm . Square C . I . Frame With Hinged Cover , Masonary Housing , Alternate Layers / Of Charcoal / Coke And Salt At Least 150Mm Thick Alround Etc . Complete In , Supply And Fixing Of Flush / Surface Mounting Distribution Boards Complete In All Respects . B ) 6 Way Tpn , Supply And Fixing Of 6 Amp To 32 Amp 4 Pole Mcb ( 10Ka ) C Curve A ) 25 Amps . 4P Mcb , S / F 63 Amp . 415 V Metal Clad Tpn Hrc Type Switch Fuse Unit Complete With Hrc Fuse , On Angle Iron Frame Complete In All Respects . , Supply And Fixing Following Rating Four Pole , 415 Volts Isolator In The Existing Mcb Db Complete With Connections , As Required . A ) 63 Amps . , S / F Of Single Light Wall Bracket On Matching M . D . F . E . G . . Board Base Etc . Complete In All Respects . , Supply And Fixing Of Recess / Surface / Pendent Mounting Round / Square12 To 15 Watt Led Down Lighter Having Powder Coated Die Cast Aluminium Housing With Heat Sink , Diffuser / Reflector And Driver Set Complete In All Respect . [ Aaa ] [ Crompton Or Philips ] , S / F / T / C Of Led Tube Light With Batten Suitable For Up To 1X22watt Led Tube Light Fitting Including Tube On Surface Complete In All Respect [ Aaa ] , Supply And Erection Of Ac 1200Mm Sweep , 230 / 250 Volts , 50 Hz Ceilling Fan With Regulater Standar Down Rod , Blades Including Connection Etc . Complete As Required ( Crompton Greaves / Gec / Orient / Bajaj ) , Fitter Workshop Dismantling Cement Concrete Or Brick Or Granolithic Floors & Including Stacking Of Dismantled Material As Directed By Engineer In Charge With In A Distance Of 60 Meters , Cement Concrete Flooring 1 : 2 : 4 ( 1 Cement : 2 Coarse Sand :4 Graded Stone Aggregate 12 - 20 Mm Nominal Size ) Laid In One Layer Neat Cement ( 40 Mm Thick Floor ) . , 2 Cm Thick Cement Plaster In Dado Or Skirting In 1:2 Consisting Of One Part Of Cement & Two Parts Of Approved Coarse Sand Laid In Panels Finished W
Basic Detail
Tender No 02/PCL/PM/2020-21
Bidding Type Tender
Location
City Barabanki
State Uttar Pradesh
Key Dates
Publish Date 05 Jun 2020
Submission Date 10 Jun 2020
Open Date 10 Jun 2020
Finance
Tender Value 30.77 Lakhs
Tender Fee 3540
EMD 15400
Exemption Not Available
Document List
4E481B18-BC07-42D9-8C7B-CBCDDE818936.html
Tendernotice_1.pdf
Bid_Documents_Barabanki.pdf
BOQ_718237.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 05, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 10, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 10, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

4E481B18-BC07-42D9-8C7B-CBCDDE818936.html

pdf

Tendernotice_1.pdf

pdf

Bid_Documents_Barabanki.pdf

xls

BOQ_718237.xls

TenderDetail
Loading tenders