| 1 | 1 | Dismantling of Structural steel works inclding doors gates but exc framed trusses etc all as specified and as directed. | | 23 | QUINTAL |
|---|
| 2 | 2 | Material and Labour for Angle iron Framed work posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; & similar work Conforming to Fe 290 Gde E-165 all as specified. | | 500 | KILOGRAM |
|---|
| 3 | 3 | Material and Labour for Structural Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., Complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Complete and conforming to Fe 410-W Gde E-250 all as specified. | | 1800 | KILOGRAM |
|---|
| 4 | 4 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings Complete all as specified and as directed. | | 250 | SQUARE\nMETRE |
|---|
| 5 | 5 | Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. | | 250 | SQUARE\nMETRE |
|---|
| 6 | 6 | Taking down existing bird proofing net from the frame and remove to MES store | | 400 | SQUARE\nMETRE |
|---|
| 7 | 7 | Supply and Fixing polyline bird proof netting all weather proof co-polymer method of knotting : Machine knotting using CNC machines with DSLC technology for anti slip knotting. Heat setting : Steam set for greater dimensional stability and knot firmness. Diameter of the twine : 1mm Mesh size 25mm x 25mm (+-2mm) type of mesgh square mesh. TBS (Twine breaking strength) : 22 KGF minimum. MBS (Mess breaking strength) 18 KBS (Knot breaking strength) 28 KGF Colour : UV Black. | | 400 | SQUARE\nMETRE |
|---|
| 8 | 8 | Material and Labour for preparation of new steel surfaces or previously untreated surfaces, not otherwise described, exceeding 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide zinc chrome primer Complete all as specified and as directed. | | 60 | SQUARE METRE |
|---|
| 9 | 9 | Material and labour for running welding in repairs, thickness of metal to be welded exc 9mm but n.exc 20mm Complete all as specified and as directed | | 30 | TEN RUNNING\nMETRE |
|---|
| 10 | 10 | Material and labour for Welding in repairs exc. 2.5 cm but not exceeding 5CM in length, thickness of Metal to be welded exc. 9 mm but not exc. 20 mm Complete all as specified and as directed | | 100 | EACH JOB |
|---|
| 11 | 11 | Material and Labour for Cleaning of Sewer lines from Manhole to Manhole of any depth and any dia of pipe including testing sewer line by pouring water complete all as directed by Engr-in-Charge. | | 2000 | RUNNING\nMETRE |
|---|
| 12 | 12 | Cleaning of Manhole of any size and any depth including taking out sludge, sewer water, using Mechanical method/pressure jet machine any other materials etc and disposal of the same outside MD land complete all as directed by Engr-in-Charge. | | 200 | CUBIC\nMETRE |
|---|
| 13 | 13 | Cleaning of blockages from Nahani trap to Gully trap by Roding etc and cleaning the sludge from NT taking up and refixing the grating in Cement mortar 1:3 including testing by pouring the water until smooth flow, complete all as directed by Engr-in-charge. | | 60 | EACH\nJOB |
|---|
| 14 | 14 | Cleaning of blockages from Gully trap to 1st Manhole length of sewer line not exceeding 5mtr by roding etc and cleaning all sludge from Gully trap to 1st Manhole including pouring water until the smooth flow and necessary earth work and disposal of sludge etc complete all as directed by Engr-in-charge. | | 60 | EACH\nJOB |
|---|
| 15 | 15 | Cleaning of blockages from water closet including cleaning the soil pipe (for 1st and 2nd floor) by removing the access door cover in the bend and refixing it after cleaning the pipe, pouring water until smooth flow including necessary earth work and making good damages, if any to plinth protection, Manhole etc., all as directed by Engr-in-charge. | | 50 | EACH\nJOB |
|---|
| 16 | 16 | Demolition of existing SGSW gully trap including PCC kerb etc and Supply and Fix SGSW gully trap Square mouthed 100mm size set in cement concrete 1:3:6, type C1, block measuring 450mm and 100mm thick bed concrete and jointing to drain pipe in cement mortar 1:1 including 100x150mm high PCC kerb in cement concrete 1:2:4, type B1 with Cast Iron perforated grating of size 150 x 150mm, bituminous coated including disposal of waste/ sludge complete all as directed by Engr-in-charge. | | 10 | EACH\nJOB |
|---|
| 17 | 17 | Demolition of PCC around floor trap and dismantling existing floor trap and cleaning the blockage of pipe from floor trap to gully trap and Supply and Fix PVC (SWR) floor / Nahani trap of size upto 100mm (square / round) in existing pipe and embedding in Cement mortar 1:1, including lowering or raising with vertical piece with PVC pipe for jointing trap and fixing gratings at true level of floor complete all as directed by Engr-in-charge. | | 10 | EACH\nJOB |
|---|
| 18 | 18 | Removing / Bailing of sewage water from the septic tank by Mechanical method of various capacities and disposal outside MD land including necessary cutting and removing all vegetations/bushes etc in and around septic tank and filter bed and removing debris outside MD land complete all as directed by Engr-in-charge.\nNote: Cost of Cutting and removing of bushes shall deemed to be included in the quoted rate against the item. | | 100 | CUBIC\nMETRE |
|---|
| 19 | 19 | Removal of sludge deposits/sediments from septic tank by Mechanical method of various capacities and disposal of the same outside MD land including cutting and removing all vegetations/bushes etc., in and around septic tank and filter bed including uprooting of small plants around septic tanks and filter beds and removing debris outside MD land complete all as directed by Engr-in-charge. | | 60 | CUBIC\nMETRE |
|---|
| 20 | 20 | Removal / taking out of sludge, mud consisting of loose aggregate sediments, mud etc from filter bed and refilling the same after cleaning/washing into the filter bed complete all as directed by Engr-in-charge. Note :- Item No. 11 to 20 : Contractor or his rep will attend and clear complaint within 24 hours after receivivng complaint from Engr-in-Charge. If failing penal recovery at the rate of Rs. 200/complaint/per day will be effected for the delay period. The amount will be recovered from the payment to the contractor from running account receipt and final bill. | | 30 | CUBIC\nMETRE |
|---|
| 21 | 21 | Demolition of reinforced Cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position Complete all as specified and as directed. | | 8 | CUBIC\nMETRE |
|---|
| 22 | 22 | Material and Labour for Precast cement concrete 1:2:4, type B1, as in Cover slabs for man holes and set in Cement Mortar 1:6 including finished top surfaces cover even & fair Complete all as specified and directed by Engr-in-charge. | | 5 | CUBIC\nMETRE |
|---|
| 23 | 23 | Material and Labour for one time use and waste Form work to soffits of suspended slabs in existing septic tank such as roof slab, floor slab not exc 200mm thick with rough finished surface of concrete complete all as specified. | | 30 | SQUARE\nMETRE |
|---|
| 24 | 24 | Material and Labour for Reinforced Cement Concrete 1:2:4 Type B1 (nominal mix) using 20 mm graded stone aggregate As in existing Septic tank roof slab, roof beams including necessary temporaty / alternate arrangements for sewage collection complete all as specified and as directed by Engr-in-charge. | | 5 | CUBIC\nMETRE |
|---|
| 25 | 25 | Material and Labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified. | | 1200 | KILOGRAM |
|---|
| 26 | 26 | Taking down 80 mm bore pipe of asbestos cement pressure pipes, any class, (incluidng all fittings), including disconnecting pipes and fittings complete. | | 40 | RUNNING\nMETRE |
|---|
| 27 | 27 | Supply and Fixing 80mm PVC (SWR) pipes Single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. | | 40 | RUNNING\nMETRE |
|---|
| 28 | 28 | Taking down 100 mm bore pipe of asbestos cement pressure pipes, any class, (incluidng all fittings), including disconnecting pipes and fittings complete. | | 40 | RUNNING\nMETRE |
|---|
| 29 | 29 | Supply and Fixing 110mm PVC (SWR) pipes Single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. | | 40 | RUNNING\nMETRE |
|---|
| 30 | 30 | Supply and Fixing bends suitable for 110mm dia PVC (SWR) pipes Complete all as specified ane directed by Engr-in-Charge. | | 10 | EACH |
|---|
| 31 | 31 | Supply and Fixing bends suitable for 75mm dia PVC (SWR) pipes Complete all as specified ane directed by Engr-in-Charge. | | 10 | EACH |
|---|
| 32 | 32 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete and removing the rubbish off the premises to a distance n.exc.50m complete all as specified and directed. | | 100 | SQUARE\nMETRE |
|---|
| 33 | 33 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth, and getting out in hard / dense soil etc., including trimming bottom and sides of trenches, levelling/grading and ramming bottom of excavation complete all as specified and directed by Engr-in-charge. | | 50 | CUBIC\nMETRE |
|---|
| 34 | 34 | Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m and not exceeding 3.0m in depth, and getting out in hard / dense soil etc., including trimming bottom and sides of trenches, levelling/grading and ramming bottom of excavation complete all as specified and directed by Engr-in-charge. | | 10 | CUBIC\nMETRE |
|---|
| 35 | 35 | Returning, filling in including spreading, levelling watering and well ramming in layers not exceeding 25cm thick in hard / dense soil complete all as directed by Engr-in-charge. | | 40 | CUBIC\nMETRE |
|---|
| 36 | 36 | Removing excavated soil to a distance exceeding 50m and not exceeding 250m and depositing where directed at level not exceeding 1.50m above the starting point complete all as directed by Engr-in-charge. | | 20 | CUBIC\nMETRE |
|---|
| 37 | 37 | Demolition and breaking up drain pipe SGSW (Salt glazed stone ware) set in Cement Mortar, 150mm internal dia and getting out from trenches complete all as directed by Engr-in-charge. | | 100 | RUNNING\nMETRE |
|---|
| 38 | 38 | Material and Labour for Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6, type C2, (using 40 mm graded stone aggregate) for 200 mm bore pipe complete all as specified and directed by Engr-in-charge. | | 95 | RUNNING\nMETRE |
|---|
| 39 | 39 | Material and Labour for 200mm PVC (SWR) Pipe drain pipes laid in trenches and jointed and tested complete all as specified and directed by Engr-in-charge. | | 100 | RUNNING\nMETRE |
|---|
| 40 | 40 | S & F in repairs, Cast iron wheel 200mm dia Heavy duty, suitable for Hangar doors, complete all as specified and directed by Engineer-in-Charge including levelling / Adjusting of existing gate. | | 6 | EACH |
|---|
| 41 | 41 | S & F in repairs, Cast iron wheel 150mm dia Heavy duty, suitable for Hangar doors, complete all as specified and directed by Engineer-in-Charge including levelling / Adjusting of existing gate. | | 6 | EACH |
|---|
| 42 | 42 | Material and labour Plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in foundations of Manholes and mass concrete all as specified and directed. | | 2 | CUBIC\nMETRE |
|---|
| 43 | 43 | Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings dressed stonework and precast concrete articles including PCC coping etc., including disposal of debris outside MD land complete all as specified and directed by Engr-in-charge. | | 7 | CUBIC\nMETRE |
|---|
| 44 | 44 | Material and Labour Pre-Cast Cement Concrete block masonry with solid blocks, in PCC 1:3:6, type C1, using 20mm graded stone aggregate exc. 10 cm in width and setting in CM (1:6), complete all as specified and as directed by Engr-in-charge.\n | | 7 | CUBIC\nMETRE |
|---|
| 45 | 45 | Material and Labour for Plain Cement Concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in coping, benching including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. | | 1.5 | CUBIC\nMETRE |
|---|
| 46 | 46 | Material and Labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM (1:4) finished even and fair without using extra cement complete all as specified and as directed by Engr-in-charge. | | 200 | SQUARE\nMETRE |
|---|
| 47 | 47 | Supply Only Integral Waterproofing Compound Complete all as specified and as directed. | | 10 | KILOGRAM |
|---|
| 48 | 48 | Material and Labour for Cutting into existing Manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B1, smooth finished, and reforming benching as required for internal dia of pipe 150mm complete all as specified and directed by Engr-in-charge. | | 4 | EACH\nPIPE |
|---|
| 49 | 49 | Material and Labour for Preparation of joints by Taking out the existing sealant or any other compound and wherever joints are cracked in the sides by cutting using mechanical methods. Prepared joint shall have a width not exceeding 10mm and upto a depth of not exceeding 15mm. Joints to be cleaned using compressed air to remove dust/loose particles etc. Polystyrene/polyethylene back up rod of suitable size having and interference fit with joints. Entire surface of joints to be primed using Primer 20, Balance area of joint to be filled with polyurethane based sealant COLPOR -200 (Pitch free gray/black) of FOSROC chemicals pvt ltd / CHOKSEY / BOSTIK or Equivalent. Applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing masking tape after the application of sealant all as specified and directed by Engr-in-Charge. \n | | 400 | RUNNING\nMETRE |
|---|
| 50 | 50 | Material and Labour for Preparation of joints by Taking out the existing sealant or any other compound and wherever joints are cracked in the sides by cutting using mechanical methods. Prepared joint shall have a width not exceeding 20mm and upto a depth of not exceeding 30mm. Joints to be cleaned using compressed air to remove dust /loose particles etc. Polystyrene/polyethylene back up rod of suitable size having and interference fit with joints. Entire surface of joints to be primed using Primer 20, Balance area of joint to be filled with polyurethane based sealant COLPOR -200 (Pitch free gray/black) of FOSROC chemicals pvt ltd /CHOKSEY/BOSTIK or Equivalent. Applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing masking tape after the application of sealant all as specified and directed by Engr-in-Charge.\n | | 600 | RUNNING\nMETRE |
|---|
| 51 | 51 | Material and Labour for Preparation of joints by Taking out the existing sealant or any other compound and wherever joints are cracked in the sides by cutting using mechanical methods. Prepared joint shall have a width not exceeding 30mm and upto a depth of not exceeding 45mm. Joints to be cleaned using compressed air to remove dust /loose particles etc. Polystyrene/polyethylene back up rod of suitable size having and interference fit with joints. Entire surface of joints to be primed using Primer 20 of FOSROC chemicals pvt ltd or Equivalent MAKE : CHOKSEY/BOSTIK\n. Balance area of joint to be filled with polyurethane based sealant COLPOR -200 (Pitch free gray/black) of FOSROC chemicals pvt ltd. Applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing masking tape after the application of sealant all as specified and directed by Engr-in-Charge.\n | | 320 | RUNNING\nMETRE |
|---|
| 52 | 52 | Material and Labour for Preparation of joints by Taking out the existing sealant or any other compound and wherever joints are cracked in the sides by cutting using mechanical methods. Prepared joint shall have a width not exceeding 40mm and upto a depth of not exceeding 60mm. Joints to be cleaned using compressed air to remove dust /loose particles etc. Polystyrene/polyethylene back up rod of suitable size having and interference fit with joints. Entire surface of joints to be primed using Primer 20 , Balance area of joint to be filled with polyurethane based sealant COLPOR -200 (Pitch free gray/black) FOSROC chemicals pvt ltd /CHOKSEY/BOSTIK or Equivalent. Applying masking tape on edges of joints to prevent accidental spillage of sealant on top surfaces to give neat finish to the sealant and removing masking tape after the application of sealant all as specified and directed by Engr-in-Charge.\n | | 100 | RUNNING\nMETRE |
|---|
| 53 | 53 | Material and Labour for making good the existing Dummy/construction and damaged edges (at joints), cracks, pot holes etc. in cement concrete floor by cutting around to true vertical surfaces by using diamond cutter, chisel, etc, and removing the debris and other foreign materials to a distance exceeding 1.5KM and not exceeding 5.0 KM and depositing where directed including necessary preparation of the surfaces by cleaning the sides and bottom surfaces using compressed air (diesel driven compressor of suitable capacity) and application of epoxy resin mortar mix to the required depth with ' Nittomortar S ' (Make : FOSROC chemicals pvt ltd /CHOKSEY/BOSTIK or Equivalent) to a true right angle all as specified by manufacturers instructions and as directed by Engr-in-charge. \n\nNote :- Item No. 48 to 53 : Contractor or his rep will attend and repair joint filling within 48 hours after receiving order from Engr-in-Charge. If failing penal recovery at the rate of Rs. 500/per day will be effected for the delay period. The amount will be recovered from the payment to the contractor from running account receipt and final bill. | | 0.45 | CUBIC\nMETRE |
|---|
| 54 | 54 | M & L for one coat of Painting lines, dashes, arrows, letters, etc on roads, pavements and the like exc 10 cm wide with road marking paint, Any colour as approved, including preparation of existing concrete surface, complete all as specified as directed by Engineer-in-charge. | | 900 | SQUARE\nMETRE |
|---|
| 55 | 55 | M & L for one coat of Painting lines, dashes, arrows, letters, etc on roads, pavements and the like n.exc 10 cm wide with road marking paint, Any colour as approved, including preparation of existing concrete surface, complete all as specified as directed by Engineer-in-charge. | | 500 | TEN RUNNING\nMETRE |
|---|
| 56 | 56 | Material and Labour for preparation of old painted surfaces of steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | | 50 | SQUARE\nMETRE |
|---|
| 57 | 57 | Removing of old painted marking in tarmac, using paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width. Complete cleaning off the surfaces to match with adjacent surface, complete all as specified and directed. | | 20 | SQUARE\nMETRE |
|---|
| 58 | 58 | M & L for preparation of old decorated wall surfaces including brooming down or steel wire brushing scrapping down smoke soot, moulds moss and efflorescent salt, trading oil and greasy spots etc and applying one coat of white wash on walls complete all as specified and directed.\n | | 8000 | SQUARE\nMETRE |
|---|
| 59 | 59 | M & L for preparation of old decorated ceiling surfaces including brooming down or steel wire brushing scrapping down smoke soot, moulds moss and efflorescent salt, trading oil and greasy spots etc and applying one coat of white wash on ceilings complete all as specified and directed.\n | | 6000 | SQUARE\nMETRE |
|---|
| 60 | 60 | M & L for prepatration of old decorated surfaces on walll including washing, rubbing down & stopping of distempered surfaces and applying one coat of oil bound distempr on walls complete all as specified & directed by Engr-in-Charge. \n | | 12000 | SQUARE\nMETRE |
|---|
| 61 | 61 | M & L for prepatration of old decorated surfaces on ceiling all including washing, rubbing down & stopping of distempered surfaces and applying one coat of oil bound distempr on ceilings complete all as specified & directed by Engr-in-Charge\n | | 3000 | SQUARE\nMETRE |
|---|
| 62 | 62 | M & L for preperation of old decorated wall surfaces including brooming down or steel wire brushing scrapping down smoke soot, moulds and efflorescent salt, trading oil and greasy spot etc and applying one coat of cement base paint complete all as specified. \n | | 15000 | SQUARE\nMETRE |
|---|
| 63 | 63 | M & L for preparing of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | | 1200 | SQUARE\nMETRE |
|---|
| 64 | 64 | M & L for preparing of old painted surfaces of wood and wood based materials of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | | 1200 | SQUARE\nMETRE |
|---|
| 65 | 65 | M & L for staining and varnishing wood and wood based surfaces of any description over 10 cm in width or girth and applying thin varnishing including preperation of old treated surfaces complete all as specified and directed. | | 170 | SQUARE\nMETRE |
|---|
| 66 | 66 | Writing letter or figures (Block, roman, Italic or Indian) n.exc 30 cm height. All as per specified and directed. | | 100 | 10 Nos (Per CM of Height) |
|---|
| 67 | 67 | Material and labour for cleaning of structural tinted glazing with spider equipment used for façade cleaning using Industan Chemical TASKI R3 applied with applicator on the tinted glass surfaces and scarping, removing stain and other dust particle using squeezer etc, all as per manufactureds instructions and as directed. | | 500 | SQUARE\nMETRE |
|---|
| 68 | 68 | M & L for preparation of old decorated wall surfaces over 10cm girth or width, including brooming down or steel wire brushing scrapping down smoke soot, moulds and efflorescent salt, trading oil and greasy spot etc and applying one coat of weather proof exterior emulsion paint, complete all as specified and directed. | | 900 | SQUARE\nMETRE |
|---|
| 69 | 69 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc, complete all as directed by Engr-in-Charge. | | 500 | SQUARE\nMETRE |
|---|
| 70 | 70 | M & L for rendering 10mm thick cement plaster in cm 1:6 on fair faces brick or concrete surfaces including finished even and smooth without using extra cement , complete all as directed by Engr-in-Charge. | | 200 | SQUARE\nMETRE |
|---|
| 71 | 71 | M & L for rendering 15mm thick cement plaster in cm 1:4 on fair faces brick or concrete surfaces including finished even and smooth without using extra cement , complete all as directed by Engr-in-Charge. | | 200 | SQUARE\nMETRE |
|---|
| 72 | 72 | M & L for rendering 5mm thick cement plaster in cm 1:3 on ceiling including finished even and smooth without using extra cement, complete all as directed by Engr-in-Charge. | | 100 | SQUARE\nMETRE |
|---|
| 73 | 73 | M & L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash, complete all as directed by Engr-in-Charge. | | 100 | SQUARE\nMETRE |
|---|
| 74 | 74 | M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint, complete all as directed by Engr-in-Charge. | | 200 | SQUARE\nMETRE |
|---|
| 75 | 75 | M & L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant painting, complete all as directed by Engr-in-Charge. | | 200 | SQUARE\nMETRE |
|---|
| 76 | 76 | M & L for complete removal of existing treatment on old wall surfaces,including brooming down or steel wire brushing scrapping down smoke soot, moulds moss and afflrescent salt, trading oil and greasy spots etc and applying two coat of weather proof exterior emulsion paint over a coat of primer, complete all as specified and directed. | | 900 | SQUARE\nMETRE |
|---|
