| 1 | 1 | Major overhauling by authorized person for service center of 125 KVA DG set ESN 4H36001/1200057, Model - 4K1080T including loading/un-loading and transportation of DG set from MES power house to workshop of authorized service center as approved by GE complete all as specifiedand directed.\nNote:- Cost of testing, coimmissioning and installation of DG at its original location shall be including in the quoted rate. Test shall be carried out by authorised Engineer of company and test report shall be generated and submitted to the department. | | 1 | Each Job |
|---|
| 2 | 2 | Repair and De-Carbonisation of Cylinder head complete all as specified. | | 1 | Each Job |
|---|
| 3 | 3 | Repair and Re-calibrating FIP including spare parts etc complete all as specified. | | 1 | Each Job |
|---|
| 4 | 4 | Repair and Re-calibrating Injector including spare parts etc complete all as specified. | | 4 | Each Job |
|---|
| 5 | 5 | Repair of connecting rod including bush fitting, bend & twist checking etc complete all as specified. | | 4 | Each Job |
|---|
| 6 | 6 | Repair and cleaning of radiator and after cooler with top and bottom tank complete all as specified. | | 1 | Each Job |
|---|
| 7 | 7 | Repair of self starter including spare parts etc complete all as specified. | | 1 | Each Job |
|---|
| 8 | 8 | Repair of B.C. Alternator including spare parts etc complete all as specified. | | 1 | Each Job |
|---|
| 9 | 9 | Repair of Silancer box including cutting, welding, cleaning etc complete all as specified. | | 1 | Each Job |
|---|
| 10 | 10 | Repair of Crank shaft including polishing, cutting etc complete all as specified. | | 1 | Each Job |
|---|
| 11 | 11 | Supply and fix Cylinder liner with 'Joint Ring' par No. 2H.008.10.0.00 complete all as specified. | | 4 | Each |
|---|
| 12 | 12 | Supply and fix Piston assly complete (Gallery Cooled Piston), part No. 4H. 1650.10.0.00 complete all as specified. | | 4 | Each |
|---|
| 13 | 13 | Ring set (for Gallery Cooled Piston) part No. 4H.1650.20.0.00 all as specified. | | 4 | Each |
|---|
| 14 | 14 | Supply and fix Bearing main Kir HA 494, Part No. M.074.4.00.003 complete all as specified. | | 1 | Each |
|---|
| 15 | 15 | Supply and fix KIR 4RTA C/R Brg, STD, (04692020), part No. B.584.400.003 complete all as specified. | | 1 | Each |
|---|
| 16 | 16 | Supply and fix Bearing bush S/E KIR 4K 1080, STD UB, part No. S.553.5.10.703 complete all as specified. | | 4 | Each |
|---|
| 17 | 17 | Supply and fix Bearing T/W KIR 6R 1080/4K 1080 (U&L) STD, part No. W.006.3.20.003 complete all as specified. | | 1 | Each |
|---|
| 18 | 18 | Supply and fix set of joints for 4H.2292/4H.2305/4H.2295, part No. 4H. 1612.56.0.00 complete all as specified. | | 1 | Each |
|---|
| 19 | 19 | Supply and fix Set of O Rings, part No. 4H.087.20.0.00 complete all as specified. | | 1 | Each |
|---|
| 20 | 20 | Supply and fix Set of Copper Washer, part No. 4H.087.30.0.00 complete all as specified. | | 1 | Each |
|---|
| 21 | 21 | Supply and fix Lub Oil Pump Assembly, part No. 6H.985.30.0.00 complete all as specified. | | 1 | Each |
|---|
| 22 | 22 | Supply and fix Cylinder head Gasket (MLS type) 1.22 MM thick, part No. 4H.1377.02.0.00 complete all as specified. | | 1 | Each |
|---|
| 23 | 23 | Supply and fix Oil Seal (115x140x12) CR MAKE, part No. 03.007.06.0.00 complete all as specified. | | 1 | Each |
|---|
| 24 | 24 | Supply and fix Gear End Oil Seal (40x105x12), part No. 4H.358.06.0.00 complete all as specified. | | 1 | Each |
|---|
| 25 | 25 | Supply and fix Fuel Feed Pump (F 002a 50 025), part No. 4H.2579.03.0.00 complete all as specified. | | 1 | Each |
|---|
| 26 | 26 | Supply and fix Poly V Belt, part No. 4H.1493.01.0.00 complete all as specified. | | 1 | Each |
|---|
| 27 | 27 | Supply and fix Poly V Belt for 6R1080T/TA (7PK Belt), part No. 6H.1171.01.0.00 complete all as specified. | | 1 | Each |
|---|
| 28 | 28 | Supply and fix Valve repair for 160 KVA 6R1080TA Engine, part No. 6H. 1019.60.0.00 complete all as specified. | | 4 | Each |
|---|
| 29 | 29 | Supply and fix Valve Guide (for Inlet & Exhaust), part No. 4H.007.02.0.00 complete all as specified. | | 8 | Each |
|---|
| 30 | 30 | Supply and fix Valve Seat Insert (Inlet), part No. 6H. 1019.07.9.00 complete all as specified. | | 4 | Each |
|---|
| 31 | 31 | Supply and fix Valve Seat Insert (Exhaust), part No. 6H. 1019.08.9.00 complete all as specified. | | 4 | Each |
|---|
| 32 | 32 | Supply and fix Valve Collet (3-Groove), part No. 02.022.28.0.00 complete all as specified. | | 16 | Each |
|---|
| 33 | 33 | Supply and fix V.R.TOE, part No. 02.024.15.0.00 complete all as specified. | | 8 | Each |
|---|
| 34 | 34 | Supply and fix Valve Seal, part No. 06.631.02.0.00 complete all as specified. | | 8 | Each |
|---|
| 35 | 35 | Supply and fix Push rod (Welded), part No. 02.024.70.0.00 complete all as specified. | | 8 | Each |
|---|
| 36 | 36 | Supply and fix Turbo charger for 4K1080TA 125 KVA Engine (TR55), part No. 4H.1437.10.0.00 complete all as specified. | | 1 | Each |
|---|
| 37 | 37 | Supply and fix Turbo Lub Oil supply pipe (for Turbo charger), part No. 4H.1437.50.0.00 complete all as specified. | | 1 | Each |
|---|
| 38 | 38 | Supply and fix Battery Charger NHP MAKE 6AMP, 12V, part No. 4H.878.07.0.00 complete all as specified. | | 1 | Each |
|---|
| 39 | 39 | Supply and fix Thermost at Element (74 DEG) - WTIL No. DEV358, part No. 39.040.09.0.00 complete all as specified. | | 1 | Each |
|---|
| 40 | 40 | Supply and fix Thermostat bypass house, part No. 4H.023.02.0.00 complete all as specified. | | 1 | Each |
|---|
| 41 | 41 | Supply and fix House Clip (41MM) for 40.002.06.0.00, part No. 50.519.08.000 complete all as specified. | | 2 | Each |
|---|
| 42 | 42 | Supply and fix Special Banjo Bolt (L.O. supply to pump), part No. 03.660.07.0.00 complete all as specified. | | 2 | Each |
|---|
| 43 | 43 | Supply and fix Fuel pipe (Fuel filter to pump), part No. 4H.1942.02.0.00 complete all as specified. | | 1 | Each |
|---|
| 44 | 44 | Supply and fix Fuel pipe (Feed pump to filter), part No. 4H.1942.03.0.00 complete all as specified. | | 1 | Each |
|---|
| 45 | 45 | Supply and fix Cap Assembly, part No. 34.036.60.0.00 complete all as specified. | | 1 | Each |
|---|
| 46 | 46 | Supply and fix Plate type Lub Oil Cooler, part No. F6.358.01.0.00 complete all as specified. | | 1 | Each |
|---|
| 47 | 47 | Supply and fix Assembly for Internal Gear, part No. 3H.005.60.0.00 complete all as specified. | | 1 | Each |
|---|
| 48 | 48 | Supply and fix Bolt for Cylinder Head, part No. 4H.007.07.0.00 complete all as specified. | | 8 | Each |
|---|
| 49 | 49 | Supply and fix Starter Ring 121 Teeth, 3.175 Module, part No. 03.035.02.0.00 complete all as specified. | | 1 | Each |
|---|
| 50 | 50 | Supply and fix Banjo Bolt, part No. 03.027.04.0.00 complete all as specified. | | 4 | Each |
|---|
| 51 | 51 | Supply and fix Banjo Bolt - M14X1.5, part No. 50.504.04.000 complete all as specified. | | 5 | Each |
|---|
| 52 | 52 | Supply and fix Lub Oil Pressure Sensor, (SENSOR + SWITCh), VDO, part No. 2H.092.11.0.00 complete all as specified. | | 1 | Each |
|---|
| 53 | 53 | Supply and fix Sensor Unit (for Elec Temp Gauge), part No. 46.085.02.0.00 complete all as specified. | | 1 | Each |
|---|
| 54 | 54 | Supply and fix Leak off pipe Assembly for 4K 10780TA Engine (125KVA), part No. 4H.252.30.0.00 complete all as specified. | | 1 | Each |
|---|
| 55 | 55 | Supply and fix Sub Assembly of Special Banjo Bolt (for Oil Spray), part No. 4H.156.07.0.00 complete all as specified. | | 4 | Each |
|---|
| 56 | 56 | Supply and fix House (Pipe to water pump) (45x45x80L), part No. 4H.073.02.0.00 complete all as specified. | | 2 | Each |
|---|
| 57 | 57 | Supply and fix House (Radiator to Water pump pipe (45x45x130L), part No. 4H.073.01.0.00 complete all as specified. | | 1 | Each |
|---|
| 58 | 58 | Supply and fix Fuel Tank S/F 180 Effective Tank Height, part No. 4H.1649.13.0.00 complete all as specified. | | 1 | Each |
|---|
| 59 | 59 | Supply and fix Plate (with rubber moulding), part No. 2H.006.20.0.00 complete all as specified. | | 1 | Each |
|---|
| 60 | 60 | Supply and fix O F Valve Assembly, part No. 34.032.60.0.00 complete all as specified. | | 1 | Each |
|---|
| 61 | 61 | Supply and fix KOEL Care Premium, Genuine Oil 20 Ltrs, part No. 82.060.10.0.20 complete all as specified. | | 40 | Ltr |
|---|
| 62 | 62 | Supply and fix Spin on Filter for Lubrication Oil, part No. 06.436.01.0.00 complete all as specified. | | 2 | Each |
|---|
| 63 | 63 | Supply and fix Fuel Filter Element Assembly for HA694T SA, part No. 06.474.05.0.00 complete all as specified. | | 1 | Each |
|---|
| 64 | 64 | Supply and fix Fuel Filter Element Pre (BOSCH), part No. 48.117.04.0.00 complete all as specified. | | 1 | Each |
|---|
| 65 | 65 | Supply and fix Primary Element for 6H.413.10.0.00 Air Cleaner, part No. 6H.413.02.0.00 complete all as specified. | | 1 | Each |
|---|
| 66 | 66 | Supply and fix KOEL Care Premium, Genuine Coolant Premix 26 Ltrs Can, part No. 82.020.35.1.26 complete all as specified. | | 52 | Ltr |
|---|
| 67 | 67 | Supply and fix Set Bolt - M8X1.25X45-8.8, part No. 50.002.08.045 complete all as specified. | | 10 | Each |
|---|
| 68 | 68 | Supply and fix Nut - M8X1.25-GR.8, part No. 50.006.08.000 complete all as specified. | | 10 | Each |
|---|
| 69 | 69 | Supply and fix ANABOND RED 100GM, part No. LPU.ME.23.0.00 complete all as specified. | | 2 | Each |
|---|
| 70 | 70 | Dismantling of old unserviceable pedstal type panel with capacitors and main switches etc after diconnecting the electric supply from the mains complete all as directed. | | 1 | Each |
|---|
| 71 | 71 | Supply, install, testing & commissioning of Automatic Power Factor Correction (APFC) Panel outdoor/indoor type, factory made CPRI Approved of 85 KVR capacity suitable for 250KVA transformer ready to use and designed conforming to IS 5039/S8623 & relevant of 50KA, front & rear openable & lockable by key having louvers and air vents, gasket & totally vermin proof & suitable for 415/440V 03 phase 50Hz, AC & housedin elegent encloser fabricated from minimum 2 mm thick CRCA sheet with power coated paint & inc cost of copper bus bar, MCCB FP, heavy duty capacitor, MCB TP 'C' series, APFC relay, Power contactor heavy duty, Digital meter, auxiliary contractor, Auto/Manual Switch, Indicator lamp LED, CT's etc for sub station at Lailapur Garrison complete all as specified and directed.\nNote : Contractor shall satisfy the power factor reading results in monthly bill of APDCL wherein power factor will show not less than 0.98 till than required correction of minor changes in desige of circut/ relays shall be the responsibility of contractor. | | 1 | Each |
|---|
| 72 | 72 | Material and labour for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 25 mm X 4 mm galvanised mild steel strip by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 40 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified. | | 2 | Each |
|---|
| 73 | 73 | Supply, Laying, testing and commissioning of LT UG cable XLPE insulated armoured electric cable heavy duty with aluminium conductor 1100 volts grade laid in trenches/surfaces of wall/in GI pipe alongwith pole for connection to OH lines including brass cable glands, clamps, etc including making good damaged surfaces as required of size 2 core 10sqmm all as specified. | | 102 | Rm |
|---|
| 74 | 74 | Supply and fix LED post top light 20 watt with IP 65 rated with soft 360 deg light distribution complete all as specified. \nNote:- Design of LED post top light shall be similar to the design of post top light exist in the area nearby or as approved by GE.\n | | 13 | Each |
|---|
| 75 | 75 | Supply and fix PVC insulated & PVC sheathed multi core cable with Annealed copper conductor 1100 volts grade 1.5sqmm 3 core all as specified. | | 30 | Rm |
|---|
| 76 | 76 | Supply and fix PVC water proof and dust proof junction box of size 4x4 inch with protection class IP 65 and desinged for out door and indoor use all as specified. \nNote:- Cost of cable gland, PVC rigid/flexible conduit, terminal and lugs for loop in /loop out of cable connection shall be deemed to be included in the quoted rate. | | 13 | Each |
|---|
| 77 | 77 | Material and labour for steel tubing light grade 40 mm bore including all fittings, for mounting of post top lantern for a suitable height of 1.5 mtr for each fitting and for cable protection including GI socket at both end of pipe to avoid damages to the cable complete all as specified. | | 8 | Rm |
|---|
| 78 | 78 | Supply and fix locally fabricated Steel tubular pole make out of heavy duty MS pipe of 50mm dia and height not less than 4 meter with base plate duty power coated of approved colour and asthetically designed suitable for mounting of solar post top light fitting complete all as specified.\nNote : Excavation and concreting for grouting of pole shall be deemed to be included in the quoted rate. Design of pole shall be similar to the design of pole exist in the area nearby or as approved by GE. | | 13 | Each |
|---|