Annual Plan 2020-21 Pulpatta Gp- Arranging Kudumbasree Office In The Second Floor Of The Panchayath Office Building ( 290/21 ) Annual Plan 2020-21 Pulpatta Gp- Arranging Kudumbasree Office In The Second Floor Of The Panchayath Office Building ( 290/
Tender Value
8 Lakhs
Estimated cost
Bid Submission
12 Jun 2020
0 days left
EMD
20000
Bank guarantee accepted
Document Fee
1620
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulpatta → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Plan 2020-21 Pulpatta Gp- Arranging Kudumbasree Office In The Second Floor Of The Panchayath Office Building ( 290/21 ) Annual Plan 2020-21 Pulpatta Gp- Arranging Kudumbasree Office In The Second Floor Of The Panchayath Office Building ( 290/21 )
BOQ
| Work Name:Annual plan 2020-21 Pulpatta GP:- Arranging Kudumbasree Office in the Second Floor of the Panchayath Office Building (290/21) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | structure | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | 5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001114 | 3.866 | cum |
| 3 | 1.002 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001115 | 53.38 | sqm |
| 4 | 1.003 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001116 | 309.28 | kilogram |
| 5 | 1.004 | 10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | BI01010001010000000000000515BI0100001117 | 598.072 | kg |
| 6 | 1.005 | 50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | BI01010001010000000000000515BI0100001118 | 742.607 | kg |
| 7 | 1.006 | od507769/2019_2020 : Roofing with GI hard colour powder coated traffod sheets 0.35mm thick or nearest available thickness with overlaps of 150mm at ends and GI hook or crank CI bolt and nuts including plain washers and bitumen washers etc complete | BI01010001010000000000000515BI0100001119 | 269.845 | sqm |
| 8 | 1.007 | od632351/2020_2021 : Ridge capping with pre painted galvenised steel sheets 0.5 mm thick 60 cm wide<br>including all cost and materials, conveyance, labour charges etc. complete. | BI01010001010000000000000515BI0100001120 | 26.78 | metre |
| 9 | 1.008 | od636474/2020_2021 : Providing and fixing 150 mm Dia PVC split pipe for rain water gutter with iron brackets<br>25x5 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes<br>complete. | BI01010001010000000000000515BI0100001121 | 10 | metre |
| 10 | 2 | Room for ICDS officer | BI01010001010000000000000515BI0100001122 | ||
| 11 | 2.001 | 50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. | BI01010001010000000000000515BI0100001123 | 21.079 | cum |
| 12 | 2.002 | 50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | BI01010001010000000000000515BI0100001124 | 0.047 | cum |
| 13 | 2.003 | 21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001125 | 29.6 | kg |
| 14 | 2.004 | 14.29 : Providing and fixing M.S. round or squre bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. | BI01010001010000000000000515BI0100001126 | 31.08 | kg |
| 15 | 2.005 | 50.9.3.1 : Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | BI01010001010000000000000515BI0100001127 | 1.853 | sqm |
| 16 | 2.006 | 50.9.6.1 : Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters | BI01010001010000000000000515BI0100001128 | 3.038 | sqm |
| 17 | 2.007 | 21.5 : Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ). | BI01010001010000000000000515BI0100001129 | 19.65 | kg |
| 18 | 2.008 | 50.12.4.1 : Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately) | BI01010001010000000000000515BI0100001130 | 19.65 | sqm |
| 19 | 2.009 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001131 | 153.71 | sqm |
| 20 | 2.01 | od627931/2020_2021 : :White cement washing one coat to new plastered area of walls including all coast<br>conveyance and all labour charges etc complete | BI01010001010000000000000515BI0100001132 | 177.12 | sqm |
| 21 | 2.011 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001133 | 19.65 | sqm |
| 22 | 2.012 | 13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . | BI01010001010000000000000515BI0100001134 | 10.098 | sqm |
| 23 | 2.013 | 50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 | BI01010001010000000000000515BI0100001135 | 30 | metre |
AI Tender Summary
Tender Timeline
Jun 05, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJun 12, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 15, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender