Northern Coalfields Limited-NCL has published Balance Work Of Installation Of Solar Pumps 7 Nos In Nearby Villages Under Csr . . Submission Date for this Tender is 17-06-2020. Solar Pump Tenders in GM Office, Block-B Area Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Name of Work: Balance work of Installation of solar pumps ( 7 nos) in nearby villages at Block-B Project under CSR 2017-18 | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Boring/Drilling of perfectly vertical bore hole by suitable method prescribed in IS: 2800 (Part 1): 1991 for specified depth below ground level to receive a suitable size of casting pipe in all type of strata including all work pertaining to boring complete as per direction of Engineer in charge | |||
| 2 | 1.1 | 150 mm dia | 100.68 | mtr | |
| 3 | 2 | providing supplying lowering and fixing at site in bore 4 mm thick PVC casing pipe in collapsible strata lowering to the bore & all other operation pertaining to the same inclusive of all cost of 125mm diameter pipe as per direction of Engineer in charge | 100.68 | mtr | |
| 4 | 3 | Providing & installation of 3HP, AC solar pump with solar panel, electrical accessories like cable, starter etc in all respect as per instruction of EIC.\n\nThe cost system will cover\n\n1. Solar panels of appropriate size\n2. High quality ISI pump-set\n3. Transportation of all equipments to beneficiary site\n4. Mounting structures & civil works as required at the site\n5. Electrical cables\n6. Water pipes of different sizes, up to 100 feet depth\n7. Cost of installation and commissioning\n8. Charges for annual maintenance contract (AMC) for 5 years\n9. Insurance premium for 5 years\n10. All taxes as applicable\n11. All other accessories, please refer to the technical specifications for details | 7 | no | |
| 5 | 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. | |||
| 6 | 4.1 | All kinds of soil. | 56 | cum | |
| 7 | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||
| 8 | 5.1 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). | 22.4 | cum | |
| 9 | 5.2 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size). | 5.6 | cum | |
| 10 | 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : | |||
| 11 | 6.1 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). | 15.4 | cum | |
| 12 | 7 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : | |||
| 13 | 7.1 | Foundations, footings, bases of columns, etc. for mass concrete | 35.84 | sqm | |
| 14 | 7.2 | Columns, Pillars, Piers, Abutments, Posts and Struts | 80.64 | sqm | |
| 15 | 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. | |||
| 16 | 8.1 | Cold twisted bars | 1694 | Kg | |
| 17 | 9 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 9030 | kg | |
| 18 | 10 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | 455 | kg | |
| 19 | 11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | |||
| 20 | 11.1 | Two or more coats on new work | 385 | sqm | |
| 21 | 12 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK | |||
| 22 | 12.1 | 25 mm nominal outer dia Pipes | 21 | metre | |
| 23 | 12.2 | 40 mm nominal outer dia Pipes | 560 | metre | |
| 24 | 13 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL | |||
| 25 | 13.1 | 15 mm dia nominal bore | 21 | metre | |
| 26 | 14 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : | |||
| 27 | 14.1 | 25 mm nominal bore | 7 | each | |
| 28 | 14.2 | 40mm nominal bore | 7 | each | |
| 29 | 15 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | |||
| 30 | 15.1 | Circular tank | 35000 | per litre | |
| 31 | 16 | Providing and fixing PTMT bib cock of approved quality and colour. | |||
| 32 | 16.1 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms | 28 | each | |
| 33 | 17 | Total impact of GST for the purpose of CTC | BI01010001010000000000000515BI0100001129 | 1 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
