Supply Of Spare Part Of Hand Pumps-Jharkhand

Supply Of Spare Part Of Hand Pumps -1 Hexagonal Bolt M12x1.75x40mm long common to IM II & III 2 Hexagonal Nut M12x1.75mm 3 Washer M12 (2.5mm thick) 4 High tensile bolt M10x1.5x40mm long. 5 Nyloc Nut M10x1.5mm 6 Handle Axle (Stainless Steel) 7 Washer for Handle Axle (4mm thick) 8 Ball Bearing 6204 Z 9 Spacer for Handle. 10 Chain with coupling. 11 Hexagonal Bolt for front Cover M12x1.75mm long. 12 Nitrile Rubber cup washer for Mark – II & III 13 Nitrile Sealing ring Mark – II 14 Nitrile Rubber Sealing Big for Lower valve Mark-II 15 Nitrile Rubber Seating Small for Upper valve Mark-II. 16 Hexagonal rod coupling M12x1.75x50mm long. 17 Pump Head Assembly (G.I.) with front cover, Bolt & third plate. 18 Front cover (G.I.) 19 Handle Assembly (G.I.) 20 (a) Water Tank Assembly for Mark – II (G.I.) 21 (b) Water Tank Assembly for Mark – III (VLOM-65) 22 Stand Assembly (G.I.) Normal. 23 Stand Assembly (Telescopic) (G.I). 24 Connecting Rod 3mtr. Long with coupling and nut (Electrogalvanized) 25 a) Cylinder Assembly complete set for Mark-II 26 b) Cylinder Assembly complete set for Mark-III (VLOM-65) 27 a) Upper valve Assembly complete set for India Mark-II 28 b) Upper valve Assembly complete set for India Mark-III (VLOM-65) 29 a) Lower valve Assembly complete set for India Mark-II 30 b) Lower valve Assembly complete set for IM-III 31 Reducer Cap for Cylinder Mark-II 32 a) Plunger Rod (S.S.) for Mark – II 33 b) Plunger Rod (S.S.) for Mark – III 34 Upper valve Guide (G.M.). 35 Rubber Seat Retainer for Mark-II 36 Third Plate for Head Assembly (Galanized) 37 Cylinder Body with brass liner for IM-II with reducer cap for Top and Bottom. 38 Gun Metal Spacer. 39 Check valve Guide Mark-II 40 a) Check Valve Seat for Mark – II 41 b) Check Valve Seat for Mark – III 42 Nitrile Rubber “O” ring (VLOM-65) 43 Push Rod for Mark – III (S.S). 44 Check Nut for Push Rod (S.S.). 45 Nitrile Rubber Cup Washer for VLOM-50 46 Nitrile Rubber Sealing Ring for Mark – III VLOM-65 47 Nitrile Rubber Seating Big for Lower Valve MK-II 48 Nitrile Rubber Seating Big for Lower Valve M-III VLOM-65) 49 Nitrile Rubber Bobbin VLOM-50 50 Nitrile Rubber “O” Ring VLOM-50 51 Nitrile Rubber cone for VLOM-50 52 Nitrile Rubber cone for VLOM-65 53 Nitrile Rubber Centralizer 150mm for (VLOM-65). 54 Nitrile Rubber Centralizer 125mm for (VLOM-65). 55 Nitrile Rubber Centralizer 150mm for (VLOM-50). 56 Nitrile Rubber Centralizer 125mm for VLOM-50 57 Nitrile Rubber Centralizer 100mm for VLOM-50 58 Water Tank Assembly Mark – III VLOM-50 59 Cylinder Assembly Complete set for Mark – III (VLOM-50) 60 Upper valve Assembly complete set for IM-III (VLOM-50) 61 Lower valve Assembly complete set for IM-III (VLOM-50) 62 a) Upper Cap Cylinder Mark – III (VLOM-65) 63 b) Upper Cap Cylinder Mark – III (VLOM-50) 64 a) Bottom Cap for Mark – III (VLOM-50) 65 b) Bottom Cap for Mark – III (VLOM-65) 66 Follower for IM-III 67 Cage for Mark-III 68 S.S. Hexagonal Bolt M-6x25mm long. 69 Basic rate of standard I.S.I. mark Deep Well Hand Pump for India mark-2, I.S.I. 15500 (Part 2) / 2004 with latest revision including 12mm x 3meter long 8 no. Connecting Rods made of bright bar electro-galvanized fitted with coupler & normal stand assembly ecommended for use with cylinder assembly suitable for bore well dia 100 to 125mm casing pipe.

Refer document

Refer document