Rural Development Government Departments Closing in 0 days TDR #24476845

Tender For Civil Works - Roads Work -Sonbhadra Nahar To Narhandih

Issued by Government Departments · DUMRAON, Bihar
Tender Value
94.12 Lakhs
Estimated cost
Bid Submission
10 Jun 2020
0 days left
EMD
1.88 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
DUMRAON → Bihar
EMD Exemption
Not Available
Quantity
Not Available

Project Description

tender for Civil Works - Roads work -Sonbhadra Nahar To Narhandih

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 03-Jun-2020 Corrected Nit Other 10-Jun-2020

BOQ

Name of Work: SONBHADRA NAHAR TO NARHANDIH (BLOCK-NAWANAGAR)
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Setting Out Pillars Providing & Fixing of Bench Mark Pillars @ four nos per km as per drawings given and direction of E/I6NO.
22Clearing and Grubbing Road Land ( By manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of E/I0.86Ha
33Removing all types of Hume pipe and stacking within a lead of 1000m including earthwork and dismantling of masonary works as per technical specification clause 202.1 .
44A) Upto 600 mm dia15Cum
55Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 100 m. (RATE OF SUM OF 3.3 AND 3.5)
6680% of BALANCED QTY OF EARTHWORK490.56Cum
77Excavation in cutting in soil by manual means for carrying of cut earth to Foundation380.69Cum
88Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 . RATE TF SUM 302 & 305)
9920% Qty of Earthwork from 1 km Lead =122.64Cum
1010Construction of Subgrade and Earthen Shoulders
1111Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.3287.98Cum
1212Granular Sub-base with Well Graded Material (Table 400.1)
1313( By mix in place method )
1414For Grading I Material
1515Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401..1094.71Cum
1616WBM Grading 3 ( By Mechanical Means )
1717Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.380.11Cum
1818SUB HEAD : BITUMINOUS ITEMS
1919Prime Coat (Low porosity)
2020Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502.5068.12Sqm
2121Tack Coat
2222Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.5068.12Sqm
2323Mix Seal Surfacing ( Type B )
2424Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 5095068.12Sqm
2525SUB HEAD : ROAD FURNITURES , KM STONES , TRAFFIC & DIRECTION SIGN , MMGSY LOGO
2626Kilometre stone
2727Reinforced cement concrete M15 grade kilometre local stone of standard design asper IRC:8 fixing in position including painting and printing , etc as per drawing and technical specification clause 1703.
2828i) 5th km stone
2929i) Km stone3No.
3030ii) 200 m stone5No.
3131Traffic sign
3232Providing and fixing of retro reflective cautionary , mandatory and informatory sign board as per IRC :67 made of 1.5 mm thick MS steel duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural road of required shade and colour supported and welded on 47mmx47mmx12swg sheet tube firmly fixed to the ground by mean of properly designed foundation with M15 grade cement concrete 450x450x600 mm ,600mm below ground level as per approved drawing clause 1701.2.2.
3333(i) 600 mm equilateral & triangle, OR5Nos
3434(ii) 600 mm circular , OR6Nos
3535(iii) 800 mm x 600 mm rectangular, OR5Nos
3636(iv) 900 mm side octagon, OR2Nos
3737(I)Providing and Fixing 'Logo' of MMGSY Project
3838Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
3939Providing and Fixing 'Logo' of Project As per Drawing
4040Citizan Information Board As per Drawing
4141Maintenance Informatroy Baord
4242Total Qty5No.
4343Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface
4444Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.265SQM
4545Provision of 300 mm dia hume pipe for irrigation purpose
4646Earth work in excavation for foundation of structures upto 3.0 m depth as per drawing and technical specification.10.12Cum
4747Sand Filling in foundation Tenches as per drawing and technical specification.2.02Cum
4848Providing and laying of a reinforced cement concrete pipe duct,300 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of slope to toe of slope in fills,constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipe as per IRC:981997,bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least half dia of pipe\nsubject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC: 98 - 1997 and approved drawings.\n30Cum
4949HUME PIPE CULVERT
5050Excavation for Structures
5151Earthwork in excavation for structures as per drawing and technical specification clause 305.1 including setting out const. of shoring and bracing, removal of stumps and other delitarious matter, and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in treanches with excavated suitable material.109.87Cum
5252Granular Sub-base bedding
5353Granular Sub-base with Well Graded Material (Table 400.1) ( By mix in place method )10.9Cum
5454PCC grade M 15 in Head Wall Foundation
5555Providing concrete for plain/ reinforced concrete in open foundation complete as per drawing and technical specification clause 802,803,1202,&1203.7.93Cum
5656Head wall in CM 1:3
5757Brick masonry work in cement mortar in substructure complete excepting pointing and plastering, as per drawing and technical specification Clauses 602, 603, 604, 1202 & 120479.53Cum
5858Providing and laying RCC pipe NP 3
5959Providing and laying reinforced cement concrete pipe NP3 for culverts on cement concrete bedding including fixing collar with cement mortor 1:2 but excluding excavation, protection works, backfilling, concrete and masonary works in head walls and parapets clauses 1106.
60601000 mm Pipe in Single Row22.5M
6161600 mm Pipe in Single Row
6262Pointing with CM 1:3
6363Pointing with CM 1:3 on brickwork as per technical specification clause 613.495.93Sqm
6464Painting on Parapet Wall (Black & White Strips) Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 170161.92Sqm
6565Back Filling in foundation
6666Filling in foundation trenches as per drawing and technical specification clause 305.3.918.31Cum
67671st Year Maintenance cost1Year
68682nd Year Maintenance cost1Year
69693rd Year Maintenance cost1Year
70704th Year Maintenance cost1Year
71715th Year Maintenance cost1Year
7272Add GST @ 12%1RS
7373Add Labour Cess @ 1%1RS
7474Seigniorage fee1RS

AI Tender Summary

OUR REF NO 24476845
AUTHORITY Government Departments
TENDER VALUE 94.12 Lakhs
LAST DATE 10-06-2020
Authority
Authority Name Rural Works Department
Work Description tender for Civil Works - Roads work -Sonbhadra Nahar To Narhandih
Basic Detail
Tender No MMGSY-20-DUMRAON-05
Bidding Type Tender
Location
City DUMRAON
State Bihar
Key Dates
Publish Date 03 Jun 2020
Submission Date 10 Jun 2020
Open Date 10 Jun 2020
Finance
Tender Value 94.12 Lakhs
Tender Fee 10000
EMD 1.88 Lakhs
Exemption Not Available
Document List
SBDD.pdf
Tendernotice_1.pdf
D6D613CE-DCED-4379-9706-BC2B9048F6B1.html
BOQ_160049.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 03, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 10, 2020
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jun 10, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 10, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

SBDD.pdf

pdf

Tendernotice_1.pdf

html

D6D613CE-DCED-4379-9706-BC2B9048F6B1.html

xls

BOQ_160049.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders