| 1 | 1 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose soil and getting out for laying under ground cable / erection of poles, stays etc complete all as specified and as directed. | | 231 | Cum |
|---|
| 2 | 2 | Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed. | | 143 | Cum |
|---|
| 3 | 3 | Removing of excavated material n, exc 50 mtr away and depositing where directed at a level n, exc 1.5 mtr above the starting point complete all as specified. | | 88 | Cum |
|---|
| 4 | 4 | Material and labour for laying of bricks sub class ‘B’ (old size bricks) laid flat perpendicular to the direction of cable for protection of cable complete all as specified and directed. | | 6.7 | Per 1000 Nos |
|---|
| 5 | 5 | Material and labour for sand cushioning for cable with river washed sand and pinning to provide required cover as specified in SSR Part –I complete all as specified and directed. | | 70 | Cum |
|---|
| 6 | 6 | Material and labour for cement concrete type C-1 1:3:6 ( using 20mm graded stone) aggregate for foundation, mass, filling, mas concrete as in coping including repair to pole copping of poles and surface finished even and smooth to match with existing coping complete all as specified and directed. | | 4 | Cum |
|---|
| 7 | 7 | Supply ,laying, connecting and testing XLPE cable underground PVC insulated and over all sheathed with aluminium conductor heavy duty 1100 volts grade laid in trenches, floors, ducts passing through pipe for road crossing etc including taking down old unsv cable of any size complete all as directed by Engr-in-Charge.Note:- (Excavation, earth work, brick protection sand cushioning and GI pipe etc shall be measured & paid for separately) of following sizes :- (a) Cross sectional area 10 Sqmm 2 core | | 200 | RM |
|---|
| 8 | 8 | (b) Cross sectional area 16 Sqmm 4 core | | 300 | RM |
|---|
| 9 | 9 | (c) Cross sectional area 25 Sqmm 3 ½ core | | 200 | RM |
|---|
| 10 | 10 | (c) Cross sectional area 70 Sqmm 3 ½ core | | 200 | RM |
|---|
| 11 | 11 | Material & labour for cross arms, bracing supports, clamps and back plates fabricated from structural steel sections of any size and shape including nut, bolts, washers, welding, bending, cold or hot drilling holes in bolts of any size including applying two coats of aluminium paint over one coat of primer complete all as specified and as directed. | | 2 | Qtl |
|---|
| 12 | 12 | Labour only for shifting of existing street lights cables where directed and extend the loop portion, cut the britle cable and connect to street light junction box including provision of suitable size aluminium tube terminal and refilling the trench complete all as directed at site. | | 25 | Each Job |
|---|
| 13 | 13 | Material and Labour for fixing street light bracket made out of GI pipe light grade 40mm bore approx length not less than 120 cm bent to shape without welding including new clamps made out of MS flat of size 30x5mm thick including cutting, welding, drilling holes, nut bolts, washer, etc and applying two coats, aluminium paint over one coat of red oxide primer on MS work complete all as directed including taking down old UNSV complete all as specified and directed. Make of pipe : Jindal (Hisar)/TATA/Prakash Surya | | 25 | Each |
|---|
| 14 | 14 | Suply and fixing PVC insulated and PVC sheathed 2.5 sqmm twin core round FR copper conductor industrial cable,1100 Volt conforming to IS 694 and making necessary connections from Junction box to street light by using suitable size of aluminium thimbles/terminal etc and testing including taking down old unsv cable of any size complete all as specified and as directed. Make:Havells Cat Pat No. WHMFDSKB22X5 or equivalent in make and model of Polycab/Plaza | | 200 | RM |
|---|
| 15 | 15 | Supply and fixing PVC insulated aluminium conductor 2.5 Sqmm 2 Core cable with 1x2.5 sqmm PVC instulated aluminium conductor as earth wire for service connection of street light from junction box of LT electric pole, incl taking down old unsv cable of any size complete all as specified and directed. Make - Havells/PolycabPlaza | | 200 | RM |
|---|
| 16 | 16 | Supply and fixing LED Light fitting 45 Watt with high power energy saving pressure die cast aluminium IP 66 roadway luminiarys heat resistant toughened glass with frame better optics for uniform distribution with high power LED as Ligh source including taking out old unserviceable one complete all as specified and as directed. Make - CG Cat Pat No LSTP-45-CDL or equivalent in make Havells/Philips/Bajaj | | 50 | Each |
|---|
| 17 | 17 | Supplt and fixing astronomical time switch with minimum switching time of 1 minute weekly programmable including making necessary electrical connections, time setting and testing etc and taking out the old unsv one complete all as directed at site. Make:Havells Crabtree XPRO Cat Pat No DCTBW01006 or equivelent in make L&T/Legrand | | 4 | Each |
|---|
| 18 | 18 | Supply and fixing LED outdrivers suitable for 45 Watt LED street light and making electrical connections and testing etc complete all as directed. Make : CG Cat part No - SODQL-65-700-45W or equivalent in make Havells/Philips | | 100 | Each |
|---|
| 19 | 19 | Dismantling and taking down unserviceable High mast lantern complete set ( 9 Nos x 250 watt / 6 Nos x 250 watt LED Flood lights) from high mast pole after disconnection all electrical connections and refixing the same after making it serviceable including all electrical connections complete all as specified and directed. Note : Spare parts required for repair of unserviceable floodlights shall be deemed to be included in quoted rate (LED driver, surge protection device etc) | | 5 | Each |
|---|
| 20 | 20 | Supply and fixing LED flood light energy saving & environmental friendly long life versatile pressure die-cast aluminum, IP65 flood light of 50 Watt 240 Volts single phase including taking down old unsv flood light of any wattage complete all as specified and directed. Make : Crompton Cat part No LFLE-50-CDL or equivalent in Havells/Bajaj | | 12 | Each |
|---|
| 21 | 21 | Supply and fixing in replacement of old UNSV/damaged retro reflecting strip on 9 and 11 mtr poles where directed. The width of tape not less than 50 mm the colour of tape shall be colour Yellow complete all as directed. Make: 3 M Cat part No E1 104R -00821 or equivalent in Raychem | | 50 | RM |
|---|
| 22 | 22 | Supply and fixing in replacement of old UNSV/damaged retro reflecting strip on 9 and 11 mtr poles where directed. The width of tapes shall not be less than 50mm and colour of tape shall be Red complete all all as dircted. Make: 3 M Cat part No E1 104R -00821 or equivalent in Raychem | | 50 | RM |
|---|
| 23 | 23 | M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised iron strip 32x6 mm dia as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 40 mm bore for protection of GI strip from earth electrode to and including the earth test point of galvanised Iron/steel . supplying and laying charcoal stone aggregate) chamber and RCC cover of size 54x54x50 mm (1:2:4) type B1 using 20 mm graded crushed stone aggregate reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, PGI funnel with wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in drawing including taking out the old one. Note - Cost of GI strip and GI protection pipe up to a distance 7.5 M shall be included in quoted rate of above Items. | | 5 | Each Set |
|---|
| 24 | 24 | Supply, install, testing & commissioning out door type cubical panel board outer shell made out of 3.15 mm thick MS sheet and MS angle section 40x40x5 mm mounted on PCC 1:2:4 type B-1 platform 60 cm above and 45 cm below the ground level, frame factory fabricated with front and back openable single door system. Each door hinged with body at 2 places and hinges should be welded with body and door) lockable/open able by Keys having chromium plated 19 mm dia fancy lock, “U” type gasket shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI for 35 MVA rupturing capacity at 415 Volts factory fabricated having modern fabrication and testing process followed by powder coat painting having thickness not less than 100 microns provided with suitable gasket to make it dust/vermin proof and general construction confirming to IS:8623/93 comprising TPN Aluminium bus bar 300 Amps insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size “F” class insulators not less than 0.5 mtr long. The bus bar shall have holes for branch connection not less than 3 out goings and one incoming, incl taking down old unsv busbar chamber of any size complete all as specified and as directed. | | 3 | Each Job |
|---|
| 25 | 25 | Supply and fixing end termination indoor type cable jointing kit suitable for 1.1 KV grade cable complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured aluminium conductor cable of size 4-16 Sqmm Indoor/Outdoor type complete all as specified and directed Make : Denson/M-seal/Raychem | | 5 | Each |
|---|
| 26 | 26 | Supply and fixing cable jointing kit suitable for 1.1 KV grade cable out door end termination, heat shrinkable type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 to150 sq mm complete all as specified and directed. Make : Denson / M-Seal/Raychem. | | 5 | Each |
|---|
| 27 | 27 | Supply and fixing LED Decorative post top (MAPLE) for 360 degree indirect light with IP 65 protection. Cat Ref - LPTO-40-CDL/M incl taking down old unsv complete all as directed. Make : Crompton or equivalent in Havells and Bajaj. | | 2 | Set of 2 |
|---|
| 28 | 28 | Material and labour for prepration of old surface of steel tubular LT poles 9.0 mtrs long, cross arms,bracing,supports,clamps,eye hooks etc and apply two coats of aluminium paint over a coat of primer including providing blue and white strips 30 cm width alternatively upto 1.50 m height from coping using synthetic enamel paint complete all as specified and directed. | | 250 | Each |
|---|
| 29 | 29 | Material and labour for prepration of old surface of steel surface of LT/street Control panel of any size by scraping the rusted part using emery paper and and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | | 4 | Each Job |
|---|
| 30 | 30 | Supply and fixing in repair street light./LT panel chromium plated 19 mm dia fancy locks where ditected complete all as specified and directed. | | 100 | Each |
|---|
