Special Repairs To Mdr 21 To Dogargan Road Taluka Shirur District Pune ( Ch 0/000 To 2/220 )
Tender Value
25.72 Lakhs
Estimated cost
Bid Submission
17 Jun 2020
0 days left
EMD
25730
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dongargaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repairs To Mdr 21 To Dogargan Road Taluka Shirur District Pune ( Ch 0 / 000 To 2 / 220 )
BOQ
| Name of Work: A)Proposed Special Repairs to MDR 21 to Dogargan road Taluka - Shirur District:- Pune (Ch 0/000 To 2/220) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing and applying tack coat with Bitumen emulsion (Rapid setting-1) using emulsion distributor at the rate of 0.25 kilogram per square meter on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 | BI01010001010000000000000515BI0100001112 | 7707.65 | Square Meter |
| 2 | 2 | Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kilo Newton static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.(50 Milimeter Thick ) | BI01010001010000000000000515BI0100001115 | 7707.65 | Square Meter |
| 3 | 3 | Providing and applying tack coat with Bitumen emulsion (Rapid setting-1) using emulsion distributor at the rate of 0.30 kilogram per square on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 | BI01010001010000000000000515BI0100001118 | 6926.4 | Square Meter |
| 4 | 4 | Providing, laying and rolling of open-graded premix carpet of 20 milimeter thickness composed of 13.2 milimeter to 5.6 milimeter aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kilo Newton static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. | BI01010001010000000000000515BI0100001121 | 6926.4 | Square Meter |
| 5 | 5 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, as per Technical Specification Clause 510 | BI01010001010000000000000515BI0100001124 | 6926.4 | Square Meter |
| 6 | 6 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 meter as per Technical Specification Clause 303.1. | BI01010001010000000000000515BI0100001127 | 355.2 | Cubic Meter |
| 7 | 7 | Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 | BI01010001010000000000000515BI0100001130 | 1 | Number |
AI Tender Summary
Tender Timeline
Jun 02, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJun 17, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 19, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender