Construction Of 02Nos B Type And 04Nos C Type Shops , 10Nos Super Market Shops , Replacement Of A . C . Sheet To Profile Sheet For 02Nos A . P . F ( 9X40 ) Mt , 01Nos Gate And Gate Pillar And 01 Deluxe Toilets And Sasa Drain At S . M . Y . Samthar .
Tender Value
1.34 Crore
Estimated cost
Bid Submission
15 Jun 2020
0 days left
EMD
8.70 Lakhs
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Samthar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 02Nos B Type And 04Nos C Type Shops , 10Nos Super Market Shops , Replacement Of A . C . Sheet To Profile Sheet For 02Nos A . P . F ( 9X40 ) Mt , 01Nos Gate And Gate Pillar And 01 Deluxe Toilets And Sasa Drain At S . M . Y . Samthar .
BOQ
| Name of Work: Construction of 02nos B Type and 04nos C Type shops, 10nos Super market shops, Replacement of A.C. Sheet to Profile sheet for 02nos A.P.F (9x40)MT, 01nos gate and gate pillar and 01 Deluxe toilets and Sasa Drain at S.M.Y. Samthar. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | . | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1.01 | Boaring and casting of 30cm. dia double under reamed pile of 50cm. dia of bulb and 3.50m deep below ground level in black cotton soil consisting 04 nos.12mmDia main bar and 6mm dia stirrups @ 25cm. c/c filled with R.C.C. in proportion of 1:2:4 cement, coarse sand and 20mm. gauge stone grit including supply of all materials, labour, T&P etc. required for proper completion of the work and as per direction of Engineer-in-charge.\nAnalysis. \n | 124 | Nos | |
| 3 | 2 | Boaring and casting of 20cm. dia single under reamed pile of 50cm. dia of bulb and 3.50m deep below ground level in black cotton soil consisting 04 nos.10mm dia main bar and 6mm dia stirrups @ 25cm. c/c filled with R.C.C. in proportion of 1:2:4 cement, coarse sand and 20mm. gauge stone grit including supply of all materials, labour, T&P etc. required for proper completion of the work and as per direction of Engineer-in-charge.\nAnalysis. \n | BI01010001010000000000000515BI0100001113 | 127 | Nos |
| 4 | 3 | Excavation in foundation in black cotton soil including lift upto 1.5m & lead upto 30m including filling, watering & ramm-ing of excavated earth into the trenches with use of special T&P such as pick axes and sabbals etc required for proper completion of the work.\nS.I.No.257 | BI01010001010000000000000515BI0100001114 | 259.82 | Cum |
| 5 | 4 | Cement concrete with 4cm gauge appro- \nved stone ballast, coarse sand, cement in the proportion 8:4:1 including supply of all materials, labour, T&P etc requir-ed for proper completion of the work.\nS.I.No.281 | BI01010001010000000000000515BI0100001115 | 169.3 | Cum |
| 6 | 5 | R.C.C. work with cement, approved coarse sand and 2cm gauge approved stone grit in proportion of 1:2:4 in Raft foundation and footing excluding supply of reinforcement and its bending but includi-ng its fixing and binding the same with binding wire and including necessary centering & shuttering etc and also inclu-ding supply of all materials, labour, T&P etc required for proper completion of the work binding wire to be supplied by the contractor free of cost.\nS.I.No.287 | BI01010001010000000000000515BI0100001116 | 20.66 | Cum |
| 7 | 6 | Same as item no.5 above but R.C.C. wo-rk in 1:2:4 in Lighter Beams i.e. having spans upto 6 metres. \nS.I.No.285 | BI01010001010000000000000515BI0100001117 | 47.39 | Cum |
| 8 | 7 | M-150 class brick work in 1:6 cement & \nfine sand mortar in foundation and plinth including necessary cutting & moulding of bricks as required & honey comb brick work including supply of all materials, labour, T&P etc required for proper com-pletion of the work.\nS.I.No.303 | BI01010001010000000000000515BI0100001118 | 176.04 | Cum |
| 9 | 8 | 2 cm thick damp coarse with cement and approved coarse sand in 1:2 with and inc-luding water proofing materials as order-ed by the Engineer-in-charge in the prop-ortion as specified by the manufacturers including supply of all materials, labour, T&P etc required for proper completion of the work and including proper curing shuttering as necessary.\nS.I.No.360 | BI01010001010000000000000515BI0100001119 | 50.12 | Sqm |
| 10 | 9 | M-150 class brick work in 1:6 cement & \nfine sand mortar in super structure in one brick thick wall including necessary cutt-ing and moulding of bricks as required and also including honey comb brick w-ork and supply of all materials, labour, T&P etc required for proper completion of the work.\nS.I.No.303+309+310 | BI01010001010000000000000515BI0100001121 | 208.87 | Cum |
| 11 | 10 | Same as item no.5 above but R.C.C. wo-rk in 1:1.5:3 in Column work. \nS.I.No.289 | BI01010001010000000000000515BI0100001122 | 7.01 | Cum |
| 12 | 11 | Cement concrete with 2cm gauge stone grit, approved coarse sand and cement in proportion of 4:2:1 including supply of all materials, labour, T&P etc required for proper completion of the work.\nS.I.No.279 | BI01010001010000000000000515BI0100001123 | 40.41 | Cum |
| 13 | 12 | Same as item no.5 above but R.C.C. wo-rk in 1:2:4 in Slab work. \nS.I.No.284 | BI01010001010000000000000515BI0100001124 | 68.73 | Cum |
| 14 | 13 | Providing and Laying “ Brick bat coba” 100 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonry coba with top finishing plaster mixing with acetic water proofing compound @ 2% by weight and including supply of all materials, labour, T&P etc. required for proper completion of the work.\nS.I.No.New item-1 P-43 | BI01010001010000000000000515BI0100001125 | 703.88 | Sqm |
| 15 | 14 | M-150 class brick work in 1:4 cement a- \nnd fine sand mortar in super structure in Half Brick thick wall including necessary cutting and moulding of bricks as requir- ed and also including honey comb brick work and supply of all materials, labour, T&P etc required for proper completion of the work.\nS.I.No.305+309+310(a). | BI01010001010000000000000515BI0100001126 | 35.87 | Cum |
| 16 | 15 | 12 mm thick plaster in 1:4 with cement, approved fine sand mortar minimum thi-ckness is not to be less than 10mm inclu-ding supply of all material, labour, T&P etc required for proper completion of the work.\nS.I.No.17.58(iii) | BI01010001010000000000000515BI0100001127 | 3048.52 | Sqm |
| 17 | 16 | Sand filling in plinth including supply of necessary quantity of sand from a suitab-le distance including watering, dressing etc including supply of all materials, lab-our, T&P etc required for proper comple-tion of the work.\nS.I.No.255 | BI01010001010000000000000515BI0100001128 | 201.78 | Cum |
| 18 | 17 | M.S. or iron work in plain work such as R.C.C. or R.B. work wrought to required shape as necessary including bending for proper completion of the work and inclu-ding supply of steel, its westage and ho-oks and authorized overlapping shall be measured.\nS.I.No.504 | 139.01 | Qtl | |
| 19 | 18 | Providing and fixing of 6 mm thick A.C. \nsheet srrips in joints of floor & skirting at\n the time of laying floor, flush with floor level including labour, T&P etc required for proper completion of the work.\nAnalysis. | 1931.62 | Rm | |
| 20 | 19 | Providing and fixing of Glass strips of 2.2 cm wide and 4.7 mm thick in joints of floor and skirting at the time of laying floor, flush with floor level including la-bour, T&P etc required for proper com-pletion of the work. \nAnalysis. | 255.4 | Rm | |
| 21 | 20 | 4cm thick 1:2:4 plain cement concrete\nfloor with cement, coarse sand and 2cm gauge stone grit laid in panels including 3mm floating coat of neat cement & also supply of all materials, labour, T&P etc required for proper completion of work.\nAnalysis. | 571.8 | Sqm | |
| 22 | 21 | 2.5cm thick 1:2:4 plain cement concrete\nfloor with cement, approved coarse sand and 2cm gauge stone grit laid in panels finished with 3mm floating coat of neat cement with 8 cm thick base concrete in 1:4:8 including supply of all materials labour and T&P etc. required for proper completion of the work. \nAnalysis. | 115.58 | Sqm | |
| 23 | 22 | 2.5cm thick 1:2:4 plain cement concrete\nfloor with cement, approved coarse sand and 2cm gauge stone grit laid in panels finished with 3mm floating coat of neat cement but without base concrete includ-ing fixing of glass strips but excluding cost of glass strips.\nS.I.No.14.69 \n | 41.04 | Sqm | |
| 24 | 23 | One priming coat and one coat of oil dis-temper on new work including supply of all materials, labour, T&P etc. required for proper completion of the work. \nS.I.No.649 | 2156.83 | Sqm | |
| 25 | 24 | Finishing wall with premium acrylic Smooth exterior paint with silicone additivies of requiered shade: new work (Two or more coat applied @1.43 ltr/10sqm over and including priming coat of exterior primer applied @2.20 kg/10 sqm). SI no 13.47.1 | 1 | 1394.29 | Sqm |
| 26 | 25 | Painting or Varnishing on new iron work in small areas or new wood work with two coats of ready mixed priming paint and one coat of approved superior quality ready mix paint or varnish including sup- ply of all materials, labour, T&P etc. req-uired for proper completion of the work paint to be used should confirm the I.S.I. No.103-1950 \nS.I.No.641 & 642 | 783.96 | Sqm | |
| 27 | 26 | Earthwork in filling work including car-tage upto 5 km. outside market yard.\nAnalysis. | 842.4 | Cum | |
| 28 | 27 | Supply of M.S.Grill of approved quality and drawing made of flat iron not bigger then 20x4 mm size including supply of all materials, labour, T&P etc and all ta-xes and also one coat of red oxide paint complete in all respect as per direction of Engineer-in–charge for proper completi-on of work at site.\nS.I.No.New Item-3 | 4.68 | Qtl | |
| 29 | 28 | Supply and fixing of 4cm thick sheesha-m wood fully glazed door and window shutter including supply and fixing of wooden cleats and stops including fixing and adjustment of hings, bolts, locks, ha-ndles, spring and other fittings but exclu-ding their supply & including fixing the glass panes with putty and brad glass to be 4.0 mm thick fitting with necessary screws.\nS.I.No.424 | 15.83 | Sqm | |
| 30 | 29 | Approximate cost of oxidized iron fittin-gs with screws for doors, windows etc re-quired for proper completion of the work.\nS.I.No.472 | 20.87 | Sqm | |
| 31 | 30 | Supply and fixing of 10 cm dia P.V.C. Down pipe complete with rose heads, bends, M.S.Clamps 2.5cm x 3m fixed to walls by 15cm long 6mm dia nails and including repair of plaster or pointing if damaged during fixing of the pipes including cost of all materials, labour, T&P etc required for proper completion of the work.\nS.I.No.730 | 105.2 | Rm | |
| 32 | 31 | Supply and fixing of Rolling Shutters of approved make made of 80x1.25mm cold rolled M.S. Lath inter locked throughout their entire length and joined together at the end by end locks and mounted on sp-ecially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the co-st of top cover and springs.\nS.I.No.520 | 101.8 | Sqm | |
| 33 | 32 | Providing and fixing of 27.5 mm long wire springs grade 2 for rolling shutters. \nS.I.No.521 | 32 | Nos | |
| 34 | 33 | Providing and fixing of top cover for ro-lling shutters. \nS.I.No.522 | 16 | Nos | |
| 35 | 34 | Extra labour and materials for plaster ov- er rough face of one brick thick wall.\nS.I.No.596 \n | 788.34 | Sqm | |
| 36 | 35 | Supply of M.S. Angle iron doors, windo-ws or ventilator frame made of approved M.S. Angle iron, wrought to required fo-rm including drilling holes, welding and resetting where necessary and also inclu-ding supply of all material, such as steel hinges of required size, nut and bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of E/I.\nS.I.NO. New item (2) | 2.54 | Qtl | |
| 37 | 36 | Same as item no.5 above but R.C.C. wo-rk in 1:2:4 in Lintel work. \nS.I.No.283 | 0.6 | Cum | |
| 38 | 37 | 2 cm thick cement plaster in dado of ski- rting in 1:3 cement and approved coarse sand laid in panels, finished with 3 mm floating coat of neat cement including su-pply of all materials, labour, T&P etc re-quired for proper completion of the work.\nS.I.No.17.63(i) | 76.19 | Sqm | |
| 39 | 38 | Same as item no.5 above but R.C.C. wo-rk in 1:2:4 in T-Beam Slab work. \nS.I.No.288 | 40.69 | Cum | |
| 40 | 39 | Supply & fixing of 30 mm thick Flush doors commercial quality confirming to IS 2202 part-1(1983) including fixing of wooden cleats & stoppers including fixing & adjustment of hinges, bolts, looks, handles, springs, as per direction of Engineer-in-charge. \nS.I.No. 476 | 5.04 | Sqm | |
| 41 | 40 | Dismantling of brick work in cement and sand mortar and including stacking of dismantled materials as directed by Engineer-in-charge within a distance of 60 metres. \n | 11.18 | Cum | |
| 42 | 41 | Dismantling of A.C Sheet including as directed by Engineer-In-Charge within a distance of 60 meters (200 feet). DSR 15.41 | 1450.8 | Sqm | |
| 43 | 42 | Providing and fixing Precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. \nD.S.R. Code No. 12.50 | 1450.8 | Sqm | |
| 44 | 43 | Same as item no 1 above but fixing of profile sheet ridge DSR 12.51 | 80.7 | Rm | |
| 45 | 44 | Mild steel or iron work of heavy sizes such as trusses, built up gates, record racks, roof work, Gates,etc. i/c riveting or welding where necessary. (When not including in an overall rates) wrought to steel and its wastage including cost of bolts, nuts if required for completion of work including fabrication of holes in Door, backchats and nosing. Fabrication of Grills/stairs case railing.S.I 503 | 17.55 | Qtl | |
| 46 | 45 | As in item 285 above,but in R.C.C Plinth beam. Rate as in item no. (285) above. \n(Refer SH P.W.D (286)) | 1.5 | Cum | |
| 47 | 46 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fasts,tie, rods, grating etc. (when not including in an over all rates) wrought to required from, including supply of steel, bolts, nuts and wastage etc. and their fixing required for proper completion of the work. SI no 502 | 2 | Qtl | |
| 48 | 47 | Providing and laying vitrified floor tiles in 600x600mm size thickness to be specified by the manufacturer with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement thick cement mortar 1:4 including groutin the jouints with white cement and matchin pigment etc. complete SI no New item 4 | 70 | Sqm | |
| 49 | 48 | Supply and fixing 5mm china white glazed tiles in floring or in skirting or dado laid with 1:3 Cement and apperoved coarse sand mortar finished with white cement slurry, jointing and polishing complete including supply of all materoils labour etc complete SI no 628 | 202 | Sqm | |
| 50 | 49 | supply and laying of 80mm thick precast cement concrete I-shape/Zag-Zag interlocking coloured paver blocks with top layer of minimum 8mm thickness having pain dimension of 200 (160+120)mm OP Cement smooth high gloss finish skid resistantm manufactured with mechanism over 4cm blanket coat of fine sand and joint filling with fine sand the compressive strenght and weight of concrete paver block shall not be less than 30mpa (m-30) and 5kg/no respectivilly confirming T&P required for proper completion of the work directed by E/I \nSI no new item 12 | 30 | Sqm | |
| 51 | 50 | Supply of M.S Angle iron doors,windows or ventilator frame made of approved M.S. Angle iron , wrought to required form including drilling holes , welding and resetting where necessary and also including supply of all material, such as steel hinges of required size, nut and bolt s etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of E/I. S.I.NO. New item (2) | 30 | Qtl | |
| 52 | 51 | Providing and applying plaster of paric putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (Refer DSR-2013(13.26)) | 628 | Sqm | |
| 53 | 52 | Providing and fixing granite stone 2.5*2.5mm size 20mm thick (materail 30a) | 10 | Sqm | |
| 54 | 53 | Providing and fixing first quality Orissa pattern I.S.I. marked W.C. pan size 580mm of approved make with 10cm H.C.I. `P`trap of approved make with 10 liters low level flushing cistern with fittings of approved make I.S.I. marked with R.S. or C.I. brackets 32mm dia G.I. flush pipe with fittings & clamps, specials and mosquito proof couplings of approved municipal design, 32mm dia G.I. bend, 32mm dia G.I.socket, 15mm dia G.I. overflow pipe with specials and mosquito proof couplings of approved municipal design, 15mm dia brass stop co- ck (400 gms) plastic connection (1.5”x1”) with brass unions including supply of all materials, labour, T&P etc. required for proper completion of the work and painting of system and fittings with approved paint, cutting and making good the walls and floors where required with cement, sand and grit. The seat and trap shall have to be fixed over minimum 3” thick c.c. in proportion of 12:6:1 including supply of all materials, labor, T&P etc. complete. \nS.I.No.301(a)\n | 5 | Nos | |
| 55 | 54 | Providing and fixing white vitreous china water closet (European type) with seal and lid, complete including painting of fitting and brackets, cutting and making good the walls and floors, W.C. pan with | 2 | Nos | |
| 56 | 55 | Providing and fixing Wash Hand Basin of white glazed earthen ware first quality of approved make with R.S. or C.I. brackets painted white, 15cm dia C.P. brass pillar cock with C.P. matel handle (weight not less than 400 gms) I.S.I. marked and 32mm dia C.P. brass chain with rubber plug 32mm dia C.P. brass waste standard pattern with check nut 32mm dia C.P. brass `P` or `S` trap and unions complete with P.V.C. connection 0.5” size including supply of all materials, labour, T&P etc required for proper completion of the work and including cutting and making good the walls and floor with cement, coarse sand and grit. Fittings used should be of superior quality.\nS.I.No.306\n | 5 | Nos | |
| 57 | 56 | Providing & fixing flat back or angular lipped front Urinal Basin of white glazed earthen ware first quality ISI marked with 5 liters CI automatic flushing cistern with G.I pull chain necessary fittings ISI marked R.S or C.I brackets standard size, flush pipe 32 mm dia telescope flush pipe 18 gauge galvanized with in brass unions and G.I clamps complete including supply of all materials, labour T&P etc. required for proper completion of work including painting of cistern and fitting with approved paint, cutting and making good the walls and floors where required with cement, sand and grit. (SENSOR TYPE)\nS.I.No.304 | 5 | Nos | |
| 58 | 57 | Supply and fixing of brass bib cock heavy quality 15 mm dia (400 gms) I.S.I. marked supply of all materials, labour, T&P etc. required for proper completion of the work.\nS.I.No. | 11 | Nos | |
| 59 | 58 | Supply and fixing of Piller cock for wash basin push back approved company complete to 15mm nominal bore | 5 | Nos | |
| 60 | 59 | Supply and fixing of brass stop cock heavy quality (400 gms) 15mm dia I.S.I. marked including cutting and threading the pipe, if required, including supply of all materials, labour, T&P etc. required for proper completion of the work.\nS.I.No. | 4 | Nos | |
| 61 | 60 | Providing & fixing 600 mm x 450 mm beveled edge mirror Atul, Kiran make glass with Indian Polish 6.50 mm thick complete with back of 600 mm .x 450 mm .x 6 mm hard board sheet fixed to wooden cleats with C.P. Brass screws and washers including supply of all materials ,labour and tools & plants etc. required for proper completion of work. (S.I.No.332) | 5 | Nos | |
| 62 | 61 | Supply and fixing PVC connetion complete in all respect as per directed LMR | 7 | Nos | |
| 63 | 62 | Supply and fixing of bottal trap for wash basin LMR | 5 | Nos | |
| 64 | 63 | Supply and fixing of 10cm dia Jali completed in all respect as per directed LMR | 15 | Nos | |
| 65 | 64 | Supply and laying of 110 mm dia P.V.C. pipe in position complete with rose heads, bends M.S. clamps fixed to walls by nails and including repair of plaster, pointing etc. if damaged during fixing of the pipes including cost of all material, labour T&P etc. required for proper completion of work. \nS.I.No.New Item 2 P-57 | 70 | Rm | |
| 66 | 65 | P/F Nahni trap Indian make 100 x 75 mm of approved quality including supply of all materials ,labour and tools & plants etc. required for proper completion of work. (S.I.No. 371) | 25 | Nos | |
| 67 | 66 | Supply and fixing of low density polythene tank of approved quality for water storage including cartage upto site of work and fixing in position but excluding cost of float valve and other specials complete. \nS.I.No.New Item 1 P-57 | 4000 | Lt | |
| 68 | 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.0 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge | BI01010001010000000000000515BI0100001112 | ||
| 69 | 67.01 | 20 mm nominal outer dia pipes | 45 | Rm | |
| 70 | 67.02 | 25 mm nominal outer dia pipes | 24 | Rm | |
| 71 | 67.03 | 32 mm nominal outer dia pipes | 35 | Rm | |
| 72 | 67.04 | 50 mm nominal outer dia pipes | 25 | Rm | |
| 73 | 67.05 | 75 mm nominal outer dia pipes | 30 | Rm | |
| 74 | 68 | Fixing C.P. brass towel rail with C.P. brass bracket fixed to plastic sleeves with C.p. brass screws\n750 x 20 mm size | 7 | Nos | |
| 75 | 69 | Class –150 brick work in 1:4 cement and c. sand mortar in F/P including supply of all materials, labor and T&P etc. required for proper completion of the work(SI 305) | 24.13 | Cum | |
| 76 | 70 | Supply & fixing of beick bats OBB complete in all respect as per direction of E/I. | 9.6 | Cum | |
| 77 | 71 | Cast Iron cover of 400mm dia | 60 | Kg | |
| 78 | 72 | P/F of 150 mm dia H.C.I bend/ Tee(ch 22.55) | 2 | Nos |
AI Tender Summary
Tender Timeline
May 30, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJun 15, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 16, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender