| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and rammingof bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kinds of soil. | BI01010001010000000000000515BI0100001113 | 6.86 | cum |
|---|
| 2 | 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | BI01010001010000000000000515BI0100001114 | 3.42 | cum |
|---|
| 3 | 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 Cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) \n | BI01010001010000000000000515BI0100001115 | 1.775 | cum |
|---|
| 4 | 4 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. | BI01010001010000000000000515BI0100001116 | 4.08 | sqm |
|---|
| 5 | 5 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001117 | 1.58 | Cum |
|---|
| 6 | 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001118 | 0.56 | Cum |
|---|
| 7 | 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001119 | 1.8 | Cum |
|---|
| 8 | 8 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete | BI01010001010000000000000515BI0100001120 | 5.76 | Sqm |
|---|
| 9 | 9 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001121 | 15.01 | Sqm |
|---|
| 10 | 10 | Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers | BI01010001010000000000000515BI0100001122 | 14.66 | Sqm |
|---|
| 11 | 11 | Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001123 | 9 | Sqm |
|---|
| 12 | 12 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars. | BI01010001010000000000000515BI0100001124 | 315 | Kg |
|---|
| 13 | 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001125 | 3.37 | cum |
|---|
| 14 | 14 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)\n\n | BI01010001010000000000000515BI0100001126 | 2.4 | sqm |
|---|
| 15 | 15 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand\n | BI01010001010000000000000515BI0100001127 | 21.6 | sqm |
|---|
| 16 | 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. \n\n\n\n\n\n | BI01010001010000000000000515BI0100001128 | 9.08 | sqm |
|---|
| 17 | 17 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 12 mm mild steel U beading \n | BI01010001010000000000000515BI0100001129 | 0.6 | sqm |
|---|
| 18 | 18 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm | BI01010001010000000000000515BI0100001130 | 2 | each |
|---|
| 19 | 19 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :\n 150x10 mm each | BI01010001010000000000000515BI0100001131 | 2 | each |
|---|
| 20 | 20 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm | BI01010001010000000000000515BI0100001132 | 4 | each |
|---|
| 21 | 21 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. | BI01010001010000000000000515BI0100001133 | 10 | Mtr |
|---|
| 22 | 22 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet............. | BI01010001010000000000000515BI0100001134 | 3.36 | sqm |
|---|
| 23 | 23 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.\n10.13.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001135 | 4.4 | kg |
|---|
| 24 | 24 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. \n\n\n\n | BI01010001010000000000000515BI0100001136 | 6.4 | sqm |
|---|
| 25 | 25 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed\npipes. 110 mm diameter | BI01010001010000000000000515BI0100001137 | 2.24 | meter |
|---|
| 26 | 26 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) | BI01010001010000000000000515BI0100001138 | 25.35 | sqm |
|---|
| 27 | 27 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) | BI01010001010000000000000515BI0100001139 | 12.76 | Sqm |
|---|
| 28 | 28 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) | BI01010001010000000000000515BI0100001140 | 3.63 | sqm |
|---|
| 29 | 29 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001141 | 5.38 | sqm |
|---|
| 30 | 30 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer | BI01010001010000000000000515BI0100001142 | 25.846 | sqm |
|---|
| 31 | 31 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | BI01010001010000000000000515BI0100001143 | 22.84 | sqm |
|---|
| 32 | 32 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests \n | BI01010001010000000000000515BI0100001144 | 2 | each |
|---|
| 33 | 33 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap | BI01010001010000000000000515BI0100001145 | 1 | each |
|---|
| 34 | 34 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | BI01010001010000000000000515BI0100001146 | 1 | each |
|---|
| 35 | 35 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | BI01010001010000000000000515BI0100001147 | 1 | each |
|---|
| 36 | 36 | Providing and fixing soil, waste and vent pipes :\n100 mm dia. Sand cast iron S&S pipe as per IS: 1729 | BI01010001010000000000000515BI0100001148 | 10 | metre |
|---|
| 37 | 37 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm dia. Sand cast iron S&S as per IS - 1729 | BI01010001010000000000000515BI0100001149 | 2 | each |
|---|
| 38 | 38 | Providing and fixing plain bend of required degree. 17.39.1 100 mm dia\n17.39.1.1 Sand cast iron S&S as per IS - 1729 | BI01010001010000000000000515BI0100001150 | 4 | each |
|---|
| 39 | 39 | Providing and fixing terminal guard : 17.56.1 100 mm,, 17.56.1.1 Sand cast iron S&S as per IS - 1729 | BI01010001010000000000000515BI0100001151 | 1 | each |
|---|
| 40 | 40 | Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :\n17.65.1 100 mm diameter pipe | BI01010001010000000000000515BI0100001152 | 10 | mtr |
|---|
| 41 | 41 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall,, 18.10.3 25 mm dia nominal bore\n | BI01010001010000000000000515BI0100001153 | 11.5 | metre |
|---|
| 42 | 42 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore | BI01010001010000000000000515BI0100001154 | 8 | metre |
|---|
| 43 | 43 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1 25 mm nominal bore | BI01010001010000000000000515BI0100001155 | 1 | each |
|---|
| 44 | 44 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : | BI01010001010000000000000515BI0100001156 | 1 | each |
|---|
| 45 | 45 | Providing and fixing uplasticised PVC connection pipe with brass unions : Providing and fixing uplasticised PVC connection pipe with brass unions :\n\n | BI01010001010000000000000515BI0100001157 | 3 | each |
|---|
| 46 | 46 | Providing and fixing G.I. Union in G.I. pipe including cutting and threadingthe pipe and making long screws etc. complete (New work) : 25 mm nominal bore | BI01010001010000000000000515BI0100001158 | 2 | each |
|---|
| 47 | 47 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore \n | BI01010001010000000000000515BI0100001159 | 2 | each |
|---|
| 48 | 48 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931,,18.53.1 15mm nominal bore | BI01010001010000000000000515BI0100001161 | 3 | each |
|---|
| 49 | 49 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 19.1.1 100 mm diameter | BI01010001010000000000000515BI0100001162 | 5 | mtr |
|---|
| 50 | 50 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 19.2.1 100 mm diameter S.W. pipe | BI01010001010000000000000515BI0100001163 | 5 | mtr |
|---|
| 51 | 51 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 19.30.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001164 | 1 | each |
|---|
| 52 | 52 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design \n | BI01010001010000000000000515BI0100001165 | 1 | each |
|---|
| 53 | 54 | Add Cost Index 18.64 % on DSR Items Sr NO. 01 to 12 Only | BI01010001010000000000000515BI0100001167 | 1 | na |
|---|
